Andrew Tridgell
2fa5e6310d
Plane: added 3rd telemetry stream on platforms that have it
...
this generalises the gcs object usage
2013-11-23 19:29:22 +11:00
Andrew Tridgell
e762c43312
Plane: switch to an array for stream rates
...
this saves a couple of hundred bytes of flash.
2013-02-05 08:20:41 +11:00
Pat Hickey
85d783d5a9
ArduPlane: fixed memory unsafe member access in GCS_MAVLINK
2013-02-02 22:43:59 -08:00
Andrew Tridgell
7046fc05e2
Plane: change to send_text_P() for progmem strings
2012-12-20 14:51:39 +11:00
Pat Hickey
92b0c302f2
ArduPlane: Ported to AP_HAL
2012-12-20 14:51:36 +11:00
Andrew Tridgell
fbc053e6e4
APM: change to one low priority status buffer per GCS instance
...
this allows us to operate the low priority messages on each link
independently.
Thanks to David Buzz for the suggestion!
2012-09-24 17:39:19 +10:00
Andrew Tridgell
41017442f8
APM: removed unnecessary waypoint_sending flag
2012-09-22 20:17:19 +10:00
Andrew Tridgell
63940d3ab6
APM: don't send GPS_STATUS MAVLink message
...
it now provides no useful information as satellites_visible is in
GPS_RAW_INT in MAVLink 1.0
2012-09-22 20:12:43 +10:00
Andrew Tridgell
3077de0d33
APM: much faster parameter fetching
...
allow up to 30% of bandwidth to be used for parameter send
2012-09-20 07:29:23 +10:00
uncrustify
bd0146f776
uncrustify ArduPlane/GCS.h
2012-08-21 18:58:53 -07:00
Andrew Tridgell
0ffc89d512
APM: support the MISSION_WRITE_PARTIAL_LIST command
...
this allows missions to be partially updated in flight
2012-08-09 17:13:36 +10:00
Andrew Tridgell
b6a475f6a5
MAVLink: make APM build with MAVLink 1.0 possible with arduino GUI
2012-04-24 22:24:58 +10:00
Andrew Tridgell
e1270401bf
MAVLink: make parameter send use adaptive stream rate
...
this makes it possible to fetch parameters with very low air data
rates
2012-04-02 11:18:53 +10:00
Andrew Tridgell
7b50724f60
MAVLink: allow for find grained stream rate control
...
streams can now be requested at any multiple of 20ms. So if you ask
for a stream at 7Hz then you will get it at close to 7Hz.
2012-04-02 11:18:53 +10:00
Andrew Tridgell
e0bb7e2777
MAVLink: don't waste 100 bytes of bandwidth sending 1 byte of information
...
the GPS_STATUS message is a massive waste of bandwidth, but it is the
only message that tells us the number of visible satellites. So only
send it if that information changes.
This makes MAVLink work better at low baud rates
2012-03-30 17:46:20 +11:00
Andrew Tridgell
df8a557630
AP_Param: update users of AP_Param for ParamToken
2012-02-19 17:05:28 +11:00
Andrew Tridgell
0f9adbdae0
token size for first()/next() is now 16 bits
2012-02-13 16:22:52 +11:00
Andrew Tridgell
bc0ed62aa9
adapt mainline APM code to AP_Param
2012-02-13 16:22:51 +11:00
Andrew Tridgell
7def0e98e8
USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane
...
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
2011-11-25 20:00:19 -08:00
Andrew Tridgell
9eb27c2573
GCS: fixed timeout loading waypoints
...
while loading waypoints we could saturate the link
2011-10-31 21:25:35 +11:00
Andrew Tridgell
5a44298d57
CLI: enable "hit enter 3 times" support for CLI
...
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
2011-10-27 21:54:07 +11:00
Andrew Tridgell
e2ed1f1c56
removed some more unused defines
...
mavlink is now the only choice for HIL and GCS
2011-09-19 11:04:02 +10:00
Andrew Tridgell
55cd7bcf1d
added gcs_severity enum
...
this makes it harder to mixup defines
2011-09-19 11:04:02 +10:00
Andrew Tridgell
66e4ae50bb
remove some more old cruft
2011-09-19 11:04:02 +10:00
Andrew Tridgell
73223ee458
remove Mavlink_Common.h and used deferred logic for params/waypoints
...
this moves the mavlink send logic into GCS_Mavlink.pde, and also
ensures we only ever send parameters and waypoints when there is
sufficient space in the serial send buffer
2011-09-19 11:04:02 +10:00
Andrew Tridgell
de12ea429e
remove some more unused code in the GCS interface
2011-09-19 11:04:02 +10:00
Andrew Tridgell
e61d742345
GCS: make the two GCS links gcs0 and gcs3
...
the artifical separation between 'gcs' and 'hil' just leads to
confusion. This also simplifies the code a bit more, and saves us a
bit more text
2011-09-19 11:04:02 +10:00
Andrew Tridgell
17ebb311a7
MAVLink: use enum ap_message and remove unused param argument
...
saves us another 200 bytes of text
2011-09-19 11:04:02 +10:00
Andrew Tridgell
e0dc1271d6
imported ArduPlane from ArduPilotMega svn
2011-09-09 11:29:39 +10:00