bugobliterator
afea703aaf
AP_HAL: ensure libc realloc is available for all platforms except ChibiOS
2020-03-24 10:32:14 +11:00
bugobliterator
c615bd9874
AP_HAL: implement standard realloc method
2020-03-24 10:32:14 +11:00
Peter Barker
a59c3670c8
AP_HAL_ChibiOS: stash lr_thd in watchdog hardfault handler
2020-03-19 16:03:58 +11:00
Andrew Tridgell
add7615ed9
AP_HAL: removed unnecessary subtypes
2020-03-14 08:35:32 +11:00
Andrew Tridgell
58b4b523fd
AP_HAL: added in_expected_delay()
...
allows for error message suppression when delays are expected
2020-03-11 16:30:06 +11:00
Peter Hall
6ab13333c2
AP_HAL: support ProfiLEDs
2020-03-10 10:37:26 +11:00
Peter Barker
09562e1f13
AP_HAL_Linux: use constants for high/low rather than defines, like ChibiOS
...
These are really bad defines to have hanging around for general use.
2020-03-03 10:46:06 +11:00
Andrew Tridgell
5d15d867b5
AP_HAL: adjust LED API to allow more than 32 LEDs on a pin
2020-02-27 13:12:26 +11:00
Andy Piper
509341957f
AP_HAL: check for div0 in quinn's estimator
2020-02-25 08:35:09 +11:00
Andy Piper
f4a99a1589
AP_HAL: hardware abstraction for FFT.
...
control inclusion of FFT based on HAL_WITH_DSP and HAL_GYROFFT_ENABLED. target appropriate ARM cpus
define hanning window and quinn's estimator
start/analyse version of FFT to support threading
allocate memory in a specific region
calculate frequency and noise bandwidth of two noisiest peaks
control inclusion of DSP based on board size
2020-02-22 11:15:37 +11:00
Peter Hall
2bd6d4674b
AP_HAL: utility: add thread safe ring buffer duplicate
2020-02-12 07:05:05 +11:00
Willian Galvani
4afdff746e
AP_HAL: Fix Navigator orientation
...
The Rev2 prototype board had the IMU rotated
2020-02-04 22:47:16 -05:00
Randy Mackay
a71ae54d3a
AP_HAL: add RCOutput::get_output_mode_banner
2020-02-04 12:23:33 +11:00
Andrew Tridgell
3105c6a050
AP_HAL: added pulse_input_enable() API
...
this allows disabling pulse input at runtime to lower CPU load on
IOMCU when decoding via a UART
2020-01-31 11:09:07 +11:00
Peter Barker
1344827c07
AP_HAL: add empty overridable trap method
2020-01-29 10:27:01 +11:00
Andrew Tridgell
f683741a9c
AP_HAL: make all semaphores recursive
...
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Andrew Tridgell
629ebbb8ea
AP_HAL: removed old PX4 define
2020-01-18 17:01:40 +11:00
Patrick José Pereira
dc44a17c46
AP_HAL: Add navigator board
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-01-16 08:01:54 +11:00
Peter Barker
f6bb94ff33
AP_HAL: add missing break statement in dsm code
2020-01-15 13:55:42 +11:00
Andrew Tridgell
4eccea2607
AP_HAL: define more UART option bits
2020-01-03 17:32:23 +11:00
Andrew Tridgell
12b6f73d83
AP_HAL: added erase() method to Storage class
2020-01-02 09:52:57 +11:00
Andy Piper
22d6fd5e1f
AP_HAL: update docs for ObjectBuffer
2019-12-10 21:07:58 +11:00
Peter Barker
10c50844fd
AP_HAL: stop emitting extra CR before a LF as part of our printf
2019-11-08 17:37:04 +11:00
Peter Barker
3f9a4ee5f9
AP_HAL: fix unit test compilation due to -Werror=format-truncation
2019-11-06 21:42:18 +11:00
Andrew Tridgell
29a2351fd0
AP_HAL: rename AP_HAL::CAN to AP_HAL::CANHal
...
avoid conflict with ChibiOS STM32F3xx headers
2019-11-01 10:53:53 +11:00
Andrew Tridgell
9a778418a5
AP_HAL: use enum for flash_bootloader() result
2019-10-25 21:36:55 +11:00
Andrew Tridgell
15d98220e0
AP_HAL: enabled SLCAN on fmuv2 and Pixhawk1-1M
...
this fits for now, and is needed for CAN GPS for now
2019-10-08 10:02:14 +11:00
Andrew Tridgell
53fab5767f
AP_HAL: cleanup ifdefs for SLCAN enable
2019-10-08 10:02:14 +11:00
Andrew Tridgell
2d00298070
AP_HAL: added HAL_MEM_CLASS for amount of memory
2019-10-01 09:29:55 +10:00
Andrew Tridgell
81711eb28e
AP_HAL: fixed build on g++ 7.3 for stm32
...
the system maths headers don't like our maths defines, but are happy
if we include math.h first
2019-09-28 14:19:46 +10:00
Peter Barker
5dad0e5410
AP_HAL: a few more simple tests for snprintf
2019-09-12 16:08:59 +10:00
Peter Barker
412bf24b9a
AP_HAL: add gtests for snprintf
2019-09-12 07:42:40 +10:00
Peter Barker
10675ab5c4
AP_HAL: correct include ordering in srxl.h
...
The header needs stdint.h which it was only getting because it was
included after stdint.h in the cpp file.
Stop including standard headers before other ArduPilot headers
2019-09-11 14:19:14 +10:00
Andrew Tridgell
4197fdeb2a
AP_HAL: fixed bug in vsnprintf()
...
we need to return the number of bytes that would have been printed if
the buffer was big enough to support use cases such as vasprintf()
which needs to know how many bytes to allocate
2019-09-11 13:41:03 +10:00
Andrew Tridgell
1cb608a9f4
AP_HAL: allow neopixel LEDs to be set more flexibly
...
allow for N leds per chain, with RGB control of each
2019-09-10 13:03:28 +10:00
Tom Pittenger
e3416b66dc
AP_HAL_ChibiOS: add Neopixel output type, similar to dshot
2019-09-10 13:03:28 +10:00
Andrew Tridgell
6983186210
AP_HAL: added get_options() method on UARTs
2019-09-06 08:51:45 +10:00
Andrew Tridgell
2bc7db4cca
AP_HAL: removed old HAL_COMPASS_ defines (no longer used)
2019-09-04 16:27:47 +10:00
Andrew Tridgell
43e011c7a8
AP_HAL: convert Linux compass specification to new probe list
...
this avoids the special handling in AP_Compass library
2019-09-04 16:27:47 +10:00
Michael du Breuil
c12652b325
AP_Rangefinder: Remove stop pin usage
2019-09-04 09:54:50 +10:00
Michael du Breuil
927a0521e3
AP_HAL: Remove the empty force_safety_no_wait
2019-09-04 07:14:50 +10:00
Andrew Tridgell
7fa6eeaaed
AP_HAL: remove unused HAL_BARO_ defines
2019-08-28 06:54:11 +10:00
Andrew Tridgell
9d94598235
AP_HAL: convert linux boards to use baro probe list
2019-08-28 06:54:11 +10:00
Andrew Tridgell
60a6f1b04a
AP_HAL: removed most HAL_INS_* defines
...
not used any more
2019-08-28 06:54:11 +10:00
Andrew Tridgell
96180018fb
AP_HAL: convert HAL_Linux to use HAL_INS_PROBE_LIST
...
makes for much simpler addition of new boards, especially with more
than one IMU
2019-08-28 06:54:11 +10:00
Andrew Tridgell
24e05e96e7
AP_HAL: define support for LIS3MDL_I2C and RM3100_SPI
2019-08-27 10:29:56 +10:00
Michael du Breuil
e47f97c5d3
AP_HAL: Fix bad buffer termination
2019-08-26 18:57:59 +01:00
Andrew Tridgell
9741ac0b64
AP_HAL: added I2C ISR count to PersistentData
2019-08-26 09:13:39 +10:00
Andrew Tridgell
c5c96c76ee
AP_HAL: added logging of hardware fault information in watchdog
...
this may help trackdown software bugs that trigger hard faults
2019-07-19 16:02:41 +10:00
murata
2e4dda5ece
AP_HAL: Match output type and variable type
2019-07-16 10:11:13 +10:00