rmackay9
1c08f176ea
AP_AHRS: add get_accel_ef method to return earth frame accelerometer values for use in ArduCopter's inertial nav and accel based throttle
2013-01-02 09:11:25 +11:00
Andrew Tridgell
ceb3f577d8
libraries: use new math functions
2012-12-20 14:53:22 +11:00
Andrew Tridgell
8b6ad6d559
SITL: removed SITL_debug()
...
not needed any more
2012-12-20 14:51:36 +11:00
Andrew Tridgell
5840ded767
AHRS: removed constrain() defines
2012-12-20 14:51:34 +11:00
Pat Hickey
9bf69d4e0d
AP_AHRS: port to AP_HAL
2012-12-20 14:51:29 +11:00
Andrew Tridgell
8561f08b2f
AP_AHRS: prevent a large delta_t from affecting DCM solution
...
this should fix large changes in attitude directly after arming
ArduCopter
2012-11-13 15:33:10 +11:00
rmackay9
83ae8e47be
AP_AHRS: replace IMU with INS and add roll and pitch trim
2012-11-07 19:20:32 +09:00
Andrew Tridgell
fe47990dab
AP_AHRS: removed the 6 sats min
...
this would put us into dead-reckoning mode
2012-11-06 14:26:49 +11:00
Andrew Tridgell
6a24bdec05
AP_AHRS: require at least 6 satellites to use the GPS for velocity
...
logs of a recent flight show the velocity estimate can be very poor if
the GPS can see 5 satellites or less
2012-11-05 20:07:37 +11:00
Andrew Tridgell
ea40432235
AP_AHRS: use GPS vertical velocity when available
2012-11-05 14:58:40 +11:00
Andrew Tridgell
00bf548f87
AHRS: limit wind speed estimate changes
...
sudden yaw changes can cause bad wind estimates
2012-10-11 11:51:24 +11:00
Andrew Tridgell
ccf8ba3ce9
DCM: limit the contribution of the baro to vertical acceleration
...
limit to a max of 0.5g
2012-09-20 17:34:32 +10:00
Andrew Tridgell
fba1692d69
AHRS: added AHRS_BARO_USE parameter
...
allow disabling of the use of the barometer for vertical acceleration
compensation
2012-09-12 14:42:04 +10:00
Andrew Tridgell
de28cc8b28
AHRS: added AHRS_WIND_MAX option
...
this allows APM to cope better with airspeed sensor failure, but
ensuring airspeed stays within AHRS_WIND_MAX of ground speed
2012-09-08 11:37:07 +10:00
Andrew Tridgell
2be785899b
AHRS: added airspeed_estimate() function
...
this allows the APM code to use an airspeed estimate for navigation
2012-08-25 17:49:26 +10:00
uncrustify
31a4442904
uncrustify libraries/AP_AHRS/AP_AHRS_DCM.cpp
2012-08-21 19:19:51 -07:00
Andrew Tridgell
134cd51d17
AHRS: moved var_info[] into top level AP_AHRS class
2012-08-21 15:58:09 +10:00
Andrew Tridgell
ac72db8f00
AHRS: added set_fast_gains() method
...
this will be used by arducopter on the ground
2012-08-21 15:38:06 +10:00
Andrew Tridgell
14cdbd36cb
AHRS: check for bad values in the error before they can affect DCM
...
this should fix the DCM renorm errors in autotest, probably caused by
bad climb rates
2012-08-18 13:54:11 +10:00
Andrew Tridgell
d9cc967508
AHRS: force an extra read of the compass on startup
...
the first read from the compass can be bad. This ensures we have a
good value when getting the initial AHRS yaw.
Thanks to Randy and Jason for the bug report!
2012-08-17 17:57:39 +10:00
Andrew Tridgell
19a5d11669
AHRS: use airspeed for wind in forward flight
...
when not turning we can use the airspeed sensor directly to calculate
the wind speed.
2012-08-12 10:54:25 +10:00
Andrew Tridgell
f5b7ae213c
AHRS: added AHRS_GPS_USE parameter
...
this allows for the GPS to be disables for position updates, which
allows for testing dead-reckoning
2012-08-11 22:06:03 +10:00
Andrew Tridgell
779dacfd24
AHRS: added wind estimation code
...
this allows us to estimate the wind while we have GPS lock, then use
that estimate in the long term dead reckoning
2012-08-11 22:06:03 +10:00
Andrew Tridgell
af4071894e
AHRS: added long-term dead-reckoning
...
this uses airspeed (if available) or last GPS ground speed to update
our position estimate in AHRS
2012-08-11 12:00:31 +10:00
Andrew Tridgell
898a5af692
AP_Param: update AHRS for new constructor syntax
2012-08-08 12:11:57 +10:00
rmackay9
468170b589
AP_AHRS_DCM: moved var_info to belong to AP_AHRS_DCM instead of AP_AHRS
2012-07-28 14:16:15 +09:00
Jonathan Challinger
9cd98e79dd
AHRS: normalise GA_b before computing error vector only if too large
...
When GA_b is small the direction of the vector is unreliable, so
normalising can exacerbate the error in the direction
2012-07-23 17:16:50 +10:00
Andrew Tridgell
5f5ab9c07c
AHRS: if we don't have gps correction enabled, zero the yaw correction
2012-07-20 17:21:04 +10:00
Andrew Tridgell
c937738732
AHRS: allow the gps/accelerometers to control yaw when rolled
...
this solves a problem with yaw estimation when at high roll angles,
when the compass code becomes ineffective
2012-07-20 11:50:04 +10:00
Michael Oborne
a469682b7b
fix param config names
2012-07-14 15:34:15 +08:00
Andrew Tridgell
0f9fb2c64b
AHRS: added AHRS_GPS_GAIN parameter
...
this allows control of how much GPS velocity information is used in
doing centripetal correction in DCM
2012-07-10 16:22:48 +10:00
Andrew Tridgell
302696951a
AHRS: make the yaw independent drift correction optional and disable
...
the new correction algorithm copes poorly with gyro drift, leading to
signification attitude errors in the face of drift
2012-07-06 15:11:30 +10:00
Andrew Tridgell
8c5ef3e60f
AHRS: only enable barometer for AHRS if it is smooth enough
...
if we used less than 5 samples to compute the pressure then don't use
it for climb rate
2012-07-05 16:29:21 +10:00
Andrew Tridgell
2cd6da2539
AHRS: only use GPS for yaw when compass is not being used
...
this avoids having two competing controllers
2012-07-05 13:00:46 +10:00
Andrew Tridgell
adfa97b6f8
AHRS: enable barometer for vertical velocity
...
this re-enables the barometer for vertical velocity information
for drift correction, now that we have a better filter
on the climb rate
2012-07-05 13:00:46 +10:00
Andrew Tridgell
3849ca8b5c
AHRS: make DCM drift correction not rely on accurate yaw
...
this uses a new formulation of the GPS based drift correction from
Bill Premerlani that rotates the error vector to avoid relying on
accurate yaw. This means we should get accurate roll/pitch correction
even with lots of magnetometer interference
It also makes it possible to fly a multicopter with no compass. It can
even navigate and correct yaw (slowly!)
2012-07-04 17:00:40 +10:00
Andrew Tridgell
1314e4f872
AHRS: make P gain on PI roll/pitch controller tunable
...
this is to make it easier for Craig and Alan to tune
2012-07-04 12:42:46 +10:00
Andrew Tridgell
16c55c64d4
AHRS: don't add the P terms in _omega
...
this can lead feedback via the _P_gain()
2012-06-29 15:10:51 +10:00
Andrew Tridgell
37fc6c46b9
AHRS: disable barometer for vertical acceleration
...
this seems to have been the cause of the 'flips' seen by Marco and
others. Testing by Craig and Alan shows that the flips are gone when
the barometric acceleration is removed.
It looks like a 5 point average filter is not enough to keep the
vertical acceleteration noise low. With high noise in the z axes, the
x and y axes are scaled back when the ge vector is normalised.
2012-06-28 11:12:49 +10:00
Andrew Tridgell
58c4d458dc
AHRS: re-instate new DCM drift correction code
...
This reverts commit 078489638d47fbaffde7c51249e36b5a8fc4ef9d.
2012-06-28 11:09:22 +10:00
Andrew Tridgell
fd241692d0
AHRS: revert to the old drift correction algorithm
...
we need to work out why Craigs quad flipped today before we enable
this new drift correction
2012-06-27 18:16:41 +10:00
Andrew Tridgell
8e044a560b
AHRS: include P term in omega
...
thanks to Jon for suggesting this
2012-06-27 16:01:50 +10:00
Andrew Tridgell
37e2f2ee2c
AHRS: implement spin rate limits
...
this follows the method that Bill developed in his fastRotations
paper. We've demonstrated that this is indeed needed in APM, as we
were able to produce the 'dizzy' effects in both the ArduPlane and
ArduCopter simulator
2012-06-27 16:01:50 +10:00
Andrew Tridgell
e4a245179c
AHRS: cope with copters with no compass
...
if a copter doesn't have a compass, we can't use the GPS for gyro
drift correction
2012-06-27 16:01:50 +10:00
Andrew Tridgell
3a41ad8e7c
AHRS: normalize the ge vector in drift correction, and use barometer
...
The normalisation ensures the error term scales uniformly with
different accelerations.
The barometer is used for vertical acceleration estimation
2012-06-27 16:01:50 +10:00
Jonathan Challinger
d230690b7b
AHRS: brought DCM more inline with Bill's implementation
...
omega_I applied continuously. _ki larger. Stop integrating when _omega.length()>20
The key change was the scaling of ge to ensure the error is not
quadratic
2012-06-27 16:01:49 +10:00
Andrew Tridgell
d4c8041c51
AHRS: first successful version of Bills new drift correction system
...
This makes 3 major changes:
1) fixes the scaling of the yaw drift correction term to fix the time
constant
2) don't integrate the mag vector over multiple readings
3) accumulate omega_I changes over 15 seconds before applying, to try
to prevent omega_I picking up short term responses
2012-06-27 16:01:49 +10:00
Andrew Tridgell
0f5c22bd8e
AHRS: implement Bills new drift correction algorithm
...
this is an initial implementation of this paper:
http://gentlenav.googlecode.com/files/RollPitchDriftCompensation.pdf
2012-06-27 16:01:49 +10:00
Andrew Tridgell
f274df454a
DCM: fixed a bug when using GPS for yaw correction
...
When using GPS for yaw correction we need to apply the x and y omegaI
corrections from the _omega_I_sum in the period before we get to the
minimum ground speed for GPS yaw correction. Otherwise we get a large
sudden omega_I change on takeoff.
2012-05-21 12:15:06 +10:00
Adam M Rivera
3309dec205
AP_AHRS_DCM.cpp: Added comments that follow the new parse structure
2012-04-25 12:00:42 -05:00
Andrew Tridgell
2a3af369b6
DCM: buffer omega_I changes over 10 seconds
...
this buffers up _omega_I changes in _omega_I_sum over a period of 10
seconds, applying the slope limit only when _omega_I_sum is
transferred to _omega_I.
The result is a huge improvement in the ability of _omega_I to track
gyro drift over the long term.
2012-04-23 12:13:25 +10:00
Andrew Tridgell
f27d85cb8d
DCM: drop the 'drop z' method
...
the 'drop z' method reduced the impact of noise on omegaI, but it also
made us more sensitive to errors in accelerometer calibration and
scaling, as demonstated by the logs from Gabor here:
http://diydrones.com/xn/detail/705844:Comment:834373
Simulation testing shows that the other noise suppression methods
applied in the DCM code, in particular the slope limiting on omegaI
the removal of the weighting and the upcoming use of a _omega_I_sum
buffer have reduced the impact of noise enough that we can now safely
include z in the acceleration calculation.
2012-04-23 12:13:24 +10:00
Andrew Tridgell
8e90aeea4e
AHRS: added AHRS_YAW_P parameter
...
this allows users to change the yaw gain in DCM
2012-04-16 20:55:13 +10:00
Andrew Tridgell
b549b88e5e
AHRS: fixed error_yaw reporting with 2 MAVLink connections
...
when a user first connects with USB, and later switches to the
telemetry port without restarting we were getting zero for error_yaw
in the logs, as AHRS.get_error_yaw() was being called twice.
This ensures we give the last value after the counter is reset
2012-03-29 12:39:53 +11:00
Andrew Tridgell
4f82134a5e
DCM: use the new rotate() method from AP_Math
...
this allows us to use a tested and optimised rotation method
2012-03-19 17:29:02 +11:00
Andrew Tridgell
d4bb068d5b
AHRS: adapt the DCM library to the AHRS framework
2012-03-19 17:29:02 +11:00
Andrew Tridgell
9d75ffeba1
AHRS: rename DCM and Quaternion implementions ready for AHRS class
...
this is the first step to creating a general AHRS class for ArduPilot
2012-03-19 17:29:01 +11:00