Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
17,553 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

73 Commits

Author SHA1 Message Date
Robert Lefebvre abb6eba291 AP_MotorsHeli: Change allow_arming check to use _rotor_speed_estimate 
In future, this will be used to check actual rotor speed (measured) if available, to prevent trying to arm with the rotor spinning.
 2015-07-21 16:25:21 +09:00
Robert Lefebvre 992c9c75bb AP_MotorsHeli: Create parameter_check method. 2015-07-21 16:25:04 +09:00
Robert Lefebvre e2fe640e6c Copter: Clean up helicopter allow_arming() function 2015-07-21 16:24:58 +09:00
Robert Lefebvre 61d6c5aa1d AP_Motors: Creation of AP_Motors_Multirotor class 2015-07-21 16:24:38 +09:00
Robert Lefebvre 11214b3414 AP_Motors: move constraints to set_throttle 2015-06-22 13:52:59 +09:00
Robert Lefebvre 0c92565d23 AP_MotorsHeli: add Critical Rotor Speed param, use to switch off runup_complete 2015-06-19 15:10:53 +09:00
Robert Lefebvre 8b917b82ee AP_MotorsHeli: Simplify set_desired_rotor_speed function definition 2015-06-19 15:10:50 +09:00
Robert Lefebvre 79e8c8f7f7 AP_MotorsHeli: whitespace fixes 2015-06-19 15:10:47 +09:00
Robert Lefebvre d24664ccf9 AP_MotorsHeli: Semantic change. Motor Runup to Rotor Runup 2015-05-29 17:46:18 +09:00
Robert Lefebvre 65ca09600c AP_Motors: Heli eliminate _dt member and fix rsc_runup calculation 2015-05-29 17:46:09 +09:00
Randy Mackay 1a1fa7ca4b AP_MotorsHeli: add comment to avoid param conflict 2015-05-25 22:13:49 +09:00
Robert Lefebvre b8181b6b90 AP_Motors: RCMAP fix 
Remove all RC Input channels passed as reference into AP_Motors.  All input handling self-contained inside AP_Motors.
Rework Tricopter to use internal servo calcs.
 2015-05-25 22:13:32 +09:00
Robert Lefebvre 73bafa131e AP_MotorsHeli: Overload output() 
To protect it from future interference from Multirotor code.
 2015-05-22 09:38:23 +09:00
Robert Lefebvre d3ce68a8ca AP_MotorsHeli: Overload update_throttle_filter() 
Do not reset filter to zero when disarmed to allow collective pitch servo movement.
 2015-05-22 09:38:20 +09:00
Randy Mackay 3d9a6a69e2 MotorsHeli: COLYAW to float 2015-05-08 14:14:36 +09:00
Randy Mackay edfa206bb8 Motors_Heli: nest heli params 2015-05-08 14:14:35 +09:00
Robert Lefebvre 1a482de5e2 AP_MotorsHeli: Overload output_armed_zero_throttle 2015-05-01 14:30:25 +09:00
Jonathan Challinger 8e442675a7 AP_Motors: introduce set_stabilize(bool), specifies whether torque demands should be output 2015-04-16 20:59:40 +09:00
Randy Mackay 72c3e9cc72 TradHeli: implement get_motor_mask 2014-07-26 16:33:20 +09:00
Robert Lefebvre 92bdf24dba AP_MotorsHeli: Add To-Do. Swash setup hasn't seemed to work right for a while, this might be why. Confirm later. 2014-07-13 17:11:22 +09:00
Robert Lefebvre 789b1018fc AP_MotorsHeli: Change set_delta_phase_angle so that it forces recalculation of collective factors. 2014-07-08 20:18:39 +09:00
Robert Lefebvre fd542e99d8 AP_MotorsHeli: Create Delta Phase Angle variable and method to set. Will be used by CCComp code. 2014-07-08 20:18:34 +09:00
Robert Lefebvre 0680b88abd AP_MotorsHeli: Add main loop rate time variable and method. Change RSC increment calc to account for loop rate time. 2014-07-08 20:18:20 +09:00
Robert Lefebvre 979abb9fbd TradHeli: Cause DDVP Tail Motor to stop immediately when Ch8 is 0. 2014-07-08 20:18:02 +09:00
Randy Mackay 3610cfe24c TradHeli: output_test for individual motors 
Based on original work by Nils Hogberg
 2014-04-29 11:41:13 +09:00
Randy Mackay 134289af38 TradHeli: motor_to_channel_map moved to progmem 2014-02-15 05:27:50 +11:00
Randy Mackay 18d3907928 TradHeli: use refs for all RC_Channels 2014-02-15 05:27:49 +11:00
Randy Mackay 80ec61f217 TradHeli: make accessor methods const 2014-02-15 05:27:43 +11:00
Randy Mackay 1426078cdb TradHeli: disable aux channels 7 and 8 2014-02-07 22:04:23 +09:00
Robert Lefebvre d441354961 TradHeli: Minor change to two param defaults 
Also one param name in the code clarified.
 2014-01-10 10:52:17 +09:00
Robert Lefebvre 782ce54a5c TradHeli: Fix for yaw offset switching. Yaw Offset should switch on and off with the main motor, not waiting until the rotor has reached full speed. 2013-12-15 11:24:09 +09:00
Randy Mackay 4148c4e024 TradHeli: bug fix for main rotor ramp up 
The main rotor ramp was being held back by the rotor speed estimate
instead of being allowed to jump up to the estimate if it's lower.

Also fixed some incorrect indentation
 2013-12-05 21:24:20 +09:00
Randy Mackay f9e19b8006 TradHeli: remove use of motor_out array 
No longer required for logging purposes as we have RCOU
 2013-11-27 22:33:02 +09:00
Randy Mackay afbb199544 TradHeli: remove slash from parameter description 
This may fix the issue in which the parameter descriptions are appearing
twice on the arducopter-parameters wiki page
 2013-11-19 11:23:07 +09:00
Randy Mackay c9c803ffd4 TradHeli: move STAB_COL_MIN to main parameter list 2013-11-15 22:58:32 +09:00
Randy Mackay b71c6bfd76 TradHeli: add RSC_RUNUP_TIME param and rotor speed estimate 2013-11-15 22:58:29 +09:00
Randy Mackay bc4dba0eea TradHeli: ext gyro gain range 0 to 1000 2013-11-15 22:58:26 +09:00
Randy Mackay 197fc67897 TradHeli: move pilot desired rotor speed to heli.pde 2013-11-15 22:58:24 +09:00
Randy Mackay 942c14258b TradHeli: ramp up changes 
Rewrote tail and main rotor ramp up methods
Moved direct drive ESC speed control into rsc_control method
Pass in ch7 servo as servo_aux to TradHeli motors object constructor
split CH7_SETPOINT parameter into GYR_GAIN and DIRECTDRIVE parameters
replaced RSC_RATE with uint8_t RSC_RAMP_TIME parameter
rename GOV_SETPOINT parameter to RSC_SETPOINT
RSC_MODE parameter description updated to indicate it controls the
source of main rotor speed
 2013-11-15 22:58:13 +09:00
Robert Lefebvre 9ac051c56d TradHeli: BugFix to ColYaw 
Credit to Jolyon Saunders for finding this bug.
 2013-11-15 22:58:11 +09:00
Robert Lefebvre 4426060ccc TradHeli: COLYAW not applied when the motor is not running 2013-11-15 22:58:06 +09:00
Robert Lefebvre 9ae66c1773 TradHeli: add support for drive tail rotors 
Repurposed external gyro and made it multi-funcitonal.
required PWM on Ch8 to start the motor in RSC Mode moved up from 100 to 400. This is to facilitate two-stage switching of the motors with PWM>100 starting the tail motor, and PWM>400 starting the main motor.
Additional amendments by Randy
 2013-11-15 22:58:04 +09:00
Randy Mackay 7ae0d3320b TradHeli: add landing collective min 2013-11-15 22:57:58 +09:00
Randy Mackay 1f65bb537f TradHeli: add get_pilot_desired_collective 
Perhaps this should be moved to the main code's heli.pde sketch
 2013-11-15 22:57:51 +09:00
Randy Mackay 13a412ee21 TradHeli: make parameters and variables private 
add accessors for variables and params required in main code
replace tabs with spaces
 2013-11-15 22:57:41 +09:00
Randy Mackay 2cc48ffcd6 Copter: formatting and param description changes 2013-11-15 22:57:37 +09:00
Robert Lefebvre 5d946be77c TradHeli: Change user description for COLYAW parameter. 2013-11-03 12:56:59 +09:00
Andrew Tridgell 97b7130bb9 libraries: update license header to GPLv3 
we switched to GPLv3 a long time ago, but neglected to update the
per-file license headers
 2013-08-30 13:01:39 +10:00
Robert Lefebvre c812d07993 TradHeli: Creating motor_runup_complete bool which is to confirm that the heli motor is running. This will be used for advanced features in the future. 2013-07-19 16:16:08 +09:00
Robert Lefebvre 957cb094ea TradHeli: Remove unused RSC Mode 3. 2013-07-19 16:16:06 +09:00