Commit Graph

146 Commits

Author SHA1 Message Date
Randy Mackay dcbbd047b4 Copter: simplify guided mode takeoff using rangefinder 2020-04-23 15:01:46 +09:00
Tatsuya Yamaguchi 29dcbd1398 Copter: use rangefinder to takeoff altitude in guided mode 2020-04-23 15:01:46 +09:00
Randy Mackay db2229f684 Copter: ModeGuided::do_user_takeoff_start arg rename
this makes it more consistent with the method it is overriding
2020-03-19 15:17:11 -07:00
Randy Mackay 8d99f204b0 Copter: integrate landing gear option and make edge based
also guided mode now retracts landing gear after takeoff
previously landing gear deployment was "level based" meaning the pilot could not override the gear's position
2020-02-26 08:01:00 +09:00
Sachchit Vekaria f6125b26e8 Copter: Allowing Terrain Following in Guided Mode
Uses frame type of MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT message to decide the value of terrain_alt boolean.
2020-02-17 14:42:42 +09:00
Bogdan Grigoruta 5183703243 Copter: move Mode::auto_takeoff_run to takeoff.cpp 2019-11-18 09:14:08 +09:00
Randy Mackay de5945bea5 Copter: use const reference when retrieving wpnav destination 2019-11-12 08:50:05 +08:00
Randy Mackay 709c874d8b Copter: integrate AP_OAPathPlanner 2019-08-17 09:42:43 +09:00
Peter Barker 676d75c391 Copter: correct namespacing of Copter modes
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.

This was done mechanically for the most part.

I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Dr.-Ing. Amilcar do Carmo Lucas 402b1cba3f Copter: replace 4 divisions with multiplications 2019-04-24 08:52:41 -07:00
Pierre Kancir caf925eda5 Copter: factorize arm or land check 2019-04-16 10:17:47 +09:00
Peter Barker 46a6f45e4a Copter: adjust for desired spool state and spool state renames 2019-04-14 12:18:03 +09:00
bnsgeyer 94738c3f86 Copter: change make_safe_shut_down to make_safe_spool_down 2019-04-08 09:42:21 +09:00
Randy Mackay a6bfafefb0 Copter: move loiter and wpnav init out of make_safe_shut_down
resolves autotest RTLSpeed test failure
2019-04-08 09:42:21 +09:00
Leonard Hall 38cc5a817f Copter: consolidate mode state decisions
bnsgeyer and rmackay9 contributed to these changes

make_safe_shut_down waits for spool down before disarming
remove use of attitude_control::set_throttle_out_unstabilized to consolidate logic between multicopters and tradhelis
2019-04-08 09:42:21 +09:00
bnsgeyer d949c80d54 Copter: tradheli replaces rotor_runup_complete with spool state 2019-04-08 09:42:21 +09:00
Peter Barker c7e21d95ef Copter: move Log_Write_Error into library 2019-03-27 12:36:40 +11:00
Peter Barker 366051c39f Copter: use enum class for AltFrame enumeration 2019-03-19 10:31:18 +11:00
Peter Barker 281dbfcef8 Copter: support send_extended_sys_state 2019-03-12 09:16:13 +09:00
Peter Barker 7c05364612 Copter: reindent mode init functions (NFC) 2019-03-01 13:43:20 +09:00
Peter Barker fab2d59a1c Copter: move check for position up 2019-03-01 13:43:20 +09:00
murata 8644f4d76e Copter: Disable option code
Copter: Revert change

Copter: Change mistakes
2019-02-26 10:00:00 +09:00
Randy Mackay 717fb4d823 Copter: integrate AC_WPNav::get_speed rename to get_default_speed 2019-01-31 19:34:32 +09:00
Peter Barker 845f015648 Copter: adjust for Location_Class and Location unification 2019-01-16 11:45:29 +11:00
Peter Barker 26ca75efae Copter: make libraries get EKF control limits themselves 2018-10-09 10:47:38 +11:00
Michael du Breuil 7e1ed948f5 Copter: Cope with AC_PosControl renaming 2018-09-20 15:15:45 -07:00
Pierre Kancir 84ff9c6928 Copter: switch to pos control when takeoff finish 2018-07-31 10:40:57 +10:00
Peter Barker 22f7f29045 Copter: move all of waypoint-takeoff into Mode namespace 2018-07-27 13:08:27 +10:00
Peter Barker 11aeec6dd1 Copter: factor out auto_takeoff_run from auto and guided
This code was identical.
2018-07-27 13:08:27 +10:00
liang.tang 57598e5b9f ArduCopter:mode_guided: yaw initialization already in pos_control_start() 2018-07-05 15:48:00 +01:00
Peter Barker 597e876953 Copter: clean up do_user_takeoff 2018-06-26 09:11:21 +09:00
Pierre Kancir 2d5cbd2cf8 ArduCopter: report crosstrack_error 2018-06-26 08:42:14 +09:00
Randy Mackay 0ba105f649 Copter: minor format fix to guided
no need to specify copter
non-functional change
2018-05-31 15:21:42 +09:00
Peter Barker 7c8583d51d Copter: implement sending of position_target_global_int 2018-05-18 20:26:37 +10:00
Peter Barker ba8b3e2415 Copter: create an AutoYaw helper object to hold auto-yaw state 2018-04-18 13:27:43 +09:00
Randy Mackay d7ea8f073f Copter: run guided velocity control at main loop rate 2018-03-16 13:50:57 +09:00
Randy Mackay 853d7ab573 Copter: remove setting of pos-con jerk 2018-03-16 13:50:57 +09:00
Leonard Hall f9acc8a666 Copter: guided removes xy mode in calls to pos-con
Also limit angle to hold altitude
2018-03-16 13:50:57 +09:00
Leonard Hall 9544b1763b Copter: replace smoothing gain with AC_AttitudeControl::set_input_tc 2018-03-16 13:50:57 +09:00
Peter Barker af56826107 Copter: follow mode fixups
add follow to FLTMODEx param descriptions
remove follow's set_velocity method
10hz logging of desired velocity in follow mode
follow mode uses pos error P gain
add send-debug-via-mavlink option
don't enter follow if follow lib is disabled
follow debug slowed to 1hz
disable follow on min-features builds
2018-03-05 15:08:08 +09:00
Andrew Tridgell 0ed75052f8 Copter: enable parameters inside mode objects
this adds FHLD_* parameters for FlowHold mode. It is a large patch as
it needs to disentagle the mode class to enable it to be used in
Parameters.h
2018-02-08 17:36:33 +11:00
Randy Mackay 8d6f8e4d9c Copter: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay e85b1ac740 Copter: pass dt to avoidance calls 2018-01-16 12:13:48 +09:00
Peter Barker 114628afe4 Copter: use zero_throttle_and_relax_ac in stab, guided, acro and auto 2018-01-08 12:02:49 +00:00
Peter Barker 71ad1b5815 Copter: use zero_throttle_and_relax_ac function 2017-12-27 12:09:06 +00:00
Randy Mackay c3fbf2671c Copter: rename control_xx.cpp files to mode_xx.cpp 2017-12-12 10:39:26 +09:00