Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-31 04:58:30 -04:00
Code Issues Packages Projects Releases Wiki Activity
29,878 Commits 71 Branches 511 Tags 834 MiB
7f61734b4d
Commit Graph

29878 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Andrew Tridgell
7f61734b4d mavlink: submodule update 
new pymavlink release
 2018-01-13 10:10:43 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
dd1f3a94e4 Mavlink: module update with upstream changes 2018-01-13 10:10:42 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
27702a060b GCS_MAVLink: do not use hardcoded array sizes 2018-01-13 10:10:41 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
8703eecfae GCS_MAVLink: Adapt to upstream mavlink changes in autopilot_version message 2018-01-13 10:10:40 +09:00
Andrew Tridgell
8284746420 mavlink: submodule update 
merge from Amilcar
 2018-01-13 10:10:39 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
36d71cd1c7 GCS_MAVLink: add microseconds since boot to the home and origin Mavlink messages 2018-01-13 10:10:38 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
2222194abd AP_GPS: Add horizontal, vertical and speed accuracy to the GPS_RAW_INT message 2018-01-13 10:10:37 +09:00
Randy Mackay
d7ceba8c0a Rover: version to 3.2.0-rc4 2018-01-05 13:46:33 +09:00
Randy Mackay
c63ad47ea2 Rover: 3.2.0-rc4 release notes 2018-01-05 13:45:42 +09:00
Randy Mackay
1bb18bc941 AR_AttitudeControl: get_throttle_out_speed uses timeout definition 2018-01-05 13:33:21 +09:00
Randy Mackay
4ac5ef3a13 AR_AttitudeControl: allow filter to be zero 
Also increase default filter to 50hz
 2018-01-05 13:33:21 +09:00
Randy Mackay
16d3e5c00d AR_AttitudeControl: add feed foward for speed and steering rate control 2018-01-05 13:33:21 +09:00
Randy Mackay
40bb2b0ad9 AR_AttitudeControl: set throttle speed pid dt 2018-01-05 13:33:21 +09:00
Randy Mackay
9930550cfc AR_AttitudeControl: lengthen timeout to 200ms 
This is required because occasionally the turn rate controller can be disabled for just over 100ms as new navigation commands are loaded
 2018-01-05 13:33:21 +09:00
Randy Mackay
a2b1807ca0 AR_AttitudeControl: fix turn-rate controller timeout 2018-01-05 13:33:21 +09:00
Randy Mackay
4e8155f4e5 AC_PID: allow non-zero ff gain default 2018-01-05 13:33:21 +09:00
Randy Mackay
072b5187a3 Rover: steering mode reversing fix 2018-01-05 10:23:20 +09:00
Randy Mackay
916fe80000 Rover: remove mode class's desired-lat-accel 
This was a duplicate of the value held in the attitude controller
 2018-01-05 09:27:53 +09:00
Randy Mackay
49493fe6a2 Rover: add calc_steering_to_heading 
removes some duplicate code in Guided and Auto
 2018-01-05 09:27:53 +09:00
Randy Mackay
af7bb7cbd7 Tools: update eLAB VEK default parameters 
Add default steering feedforward value
 2018-01-04 16:15:28 +09:00
Randy Mackay
1531801c83 AP_WheelEncoder: minor comment fix 2018-01-04 14:08:17 +09:00
Randy Mackay
dc283e9c26 Rover: re-order calc_steering declarations to match .cpp file 2018-01-04 14:07:55 +09:00
Randy Mackay
7b0b9f10de Tools: AION R1 default params use steering feed-forward 
Also add wheel encoder defaults
 2018-01-04 14:03:52 +09:00
Randy Mackay
368698d173 Tools: AION R1 default remove compass-external 
compass-external settings should normally not need to be set
 2018-01-04 14:02:53 +09:00
NickNunno
94eceddf69 Tools: update AION R1 default parameters 
Added default presets to match documentation & hardware setup.
 2018-01-04 13:51:04 +09:00
Matt
b5bdaa18ac AP_AVOIDANCE: Minimum altitude for avoidance action 2017-12-30 13:50:42 -08:00
ChrisBird
0fb679b2b2 Sub: Separate max ascent and descent speeds 
This is to match a change made to Copter.

It might be relevant to sub in that users may wish to have asymmetrical descent and ascent rates.

New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN

Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).

Modes impacted:
ALT_HOLD
CIRCLE
POSHOLD

Update a section in GUIDED mode but I don't think it is ever used but update just in case.

It will use the PILOT_SPEED_UP for ascending max velocity.  For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.

The above behavior is less of a concern for Sub but to keep it consistent its been implemented it the same way.
 2017-12-28 15:16:08 -05:00
dheideman
521bece9e7 AP_JSButton: Add servo toggle button function 2017-12-28 14:14:47 -05:00
dheideman
8b0b96d56e Sub: Add servo toggle button function 2017-12-28 14:14:47 -05:00
dheideman
307638e8af AP_JSButton: Add momentary servo button function 2017-12-28 14:14:47 -05:00
dheideman
8fec2cbea3 Sub: Add momentary servo button function 2017-12-28 14:14:47 -05:00
dheideman
dd239183c1 AP_JSButton: Add momentary relay button function 2017-12-28 14:14:47 -05:00
Daniel Heideman
963d6a7739 Sub: Add momentary relay button function 2017-12-28 14:14:47 -05:00
Peter Barker
588b0c17c8 AC_Fence: remove AC_FENCE_TYPE_NONE define 
0 is the appropriate value for a bitmask which is empty
 2017-12-28 15:38:37 +00:00
Peter Barker
ed82421f27 Sub: remove argument to check() 
Also, fence_check was renamed to check()
 2017-12-28 15:38:37 +00:00
Peter Barker
cb129fbdaf Copter: remove argument to check() 
Also, check() was check_fence()
 2017-12-28 15:38:37 +00:00
Peter Barker
aa482bae40 AC_Fence: remove argument to check() 
Also, rename check_fence() to check()
 2017-12-28 15:38:37 +00:00
Peter Barker
1d3e7d454a Rover: correct gps-is-healthy mode change check 2017-12-28 15:35:19 +00:00
Andrew Tridgell
55f73f4163 AP_Airspeed: fixed timing errors in MS5525 driver 
this fixes issue #7188, where we could read from the MS5525 sensor too
soon after requesting data and the result coming back would be garbage
 2017-12-27 11:05:54 -08:00
mirkix
6c6515711c README: add Mirko Denecke as PocketPilot maintainer 2017-12-27 16:01:55 +00:00
mirkix
4b1ec08eaf AP_BattMonitor: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix
0926802013 AP_Notify: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix
9b6a826b49 AP_HAL_linux: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix
0e7ade6f0c AP_HAL: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix
793578c0a9 ardupilotwaf: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix
7126b0c5ae Linux_HAL_Essentials: add PocketPilot PRU Firmware 2017-12-27 16:01:55 +00:00
Pierre Kancir
8c8767e964 AP_InertialSensor: reduce QURT include scope 2017-12-27 15:13:30 +00:00
Pierre Kancir
14b5c8a6c4 AP_Baro: don't include vehicle specific baro by default 2017-12-27 15:13:30 +00:00
Peter Barker
d1201e4776 Copter: tidy zero_throttle_and_relax (NFC) 2017-12-27 12:09:06 +00:00
Peter Barker
71ad1b5815 Copter: use zero_throttle_and_relax_ac function 2017-12-27 12:09:06 +00:00