Commit Graph

332 Commits

Author SHA1 Message Date
Andrew Tridgell
cd43c0ecef APM_Control: use FF to increase but not reduce tau in autotune
if user wants a slow time constant we should not override
2021-05-25 12:14:38 +10:00
Hwurzburg
4f4389df2f APM_Control: make centideg metadata incr and range consistent 2021-05-25 10:10:18 +10:00
Iampete1
bc90ba5486 AR_AttitudeControl: get_steering_out_rate use abs speed for G limit 2021-05-19 16:02:20 +01:00
Randy Mackay
b4fd9848df AR_AttitudeControl: add get_stop_speed accessor 2021-05-11 15:31:17 +09:00
Iampete1
980c41e273 APM_Control: G limit all turn rates 2021-05-03 19:22:16 -04:00
Andrew Tridgell
f64c6f9ba1 APM_Control: fixed cygwin build
FF0 is a macro in cygwin
2021-04-15 06:57:16 +10:00
Andrew Tridgell
767a0b2a99 APM_Control: tweak the activation detection to catch more events 2021-04-15 06:57:16 +10:00
Andrew Tridgell
bb1dc7192b APM_Control: lower default target filter frequencies
this will remove a lot of the level flight noise causing oscillation
at higher gains
2021-04-15 06:57:16 +10:00
Andrew Tridgell
dd98f00947 APM_Control: prevent cross-axis tuning
this should fix tuning at higher AUTOTUNE_LEVEL values
2021-04-15 06:57:16 +10:00
Andrew Tridgell
320d3d20c2 APM_Control: log autotune at 25Hz 2021-04-15 06:57:16 +10:00
Andrew Tridgell
72b51a389c APM_Control: use ATRP log msg via structure 2021-04-15 06:57:16 +10:00
Andrew Tridgell
7b073a61f1 APM_Control: allow for gain reductions when idle 2021-04-15 06:57:16 +10:00
Andrew Tridgell
91856b1d8c APM_Control: prevent bad init of FF in autotune 2021-04-15 06:57:16 +10:00
Andrew Tridgell
3fdd507157 APM_Control: log I and prevent numercial errors in autotune 2021-04-15 06:57:16 +10:00
Andrew Tridgell
24d53eade4 APM_Control: adjust filter for autotune to 0.75 Hz
this should give a better FF estimate
2021-04-15 06:57:16 +10:00
Paul Riseborough
9e6561e6b5 APM_Control: Ensure adequate trim speed 2021-04-15 06:57:16 +10:00
Andrew Tridgell
fa88967b6e APM_Control: adjust min value for tconst 2021-04-15 06:57:16 +10:00
Andrew Tridgell
b079da33c5 APM_Control: use slew rate to move gains more smoothly 2021-04-15 06:57:16 +10:00
Andrew Tridgell
772b1262d4 APM_Control: added proportional reduction to D and P 2021-04-15 06:57:16 +10:00
Andrew Tridgell
d561cd358f APM_Control: log RMAX and TAU 2021-04-15 06:57:16 +10:00
Andrew Tridgell
d914ce6829 APM_Control: reset filters on autotune start 2021-04-15 06:57:16 +10:00
Andrew Tridgell
7e64875a02 APM_Control: tweak tuning settings 2021-04-15 06:57:16 +10:00
Andrew Tridgell
ccd7b15d06 APM_Control: apply pitch limiting at high roll to rate
this fixes an issue with a large elevator trim error when rolled at
close to 90 degrees
2021-04-15 06:57:16 +10:00
Andrew Tridgell
4694820ac3 APM_Control: allow for smaller minimum tconst 2021-04-15 06:57:16 +10:00
Andrew Tridgell
97f88f67f6 APM_Control: allow for AUTOTUNE_LEVEL=0
this means keep the existing TCONST and RMAX parameters, if non-zero
2021-04-15 06:57:16 +10:00
Andrew Tridgell
316541017a APM_Control: fixed handling of clipped actuator in autotune 2021-04-15 06:57:16 +10:00
Andrew Tridgell
9997b191a8 APM_Control: log smoothed rates 2021-04-15 06:57:16 +10:00
Andrew Tridgell
20ef242280 APM_Control: fixed restore of tconst on autotune abort 2021-04-15 06:57:16 +10:00
Andrew Tridgell
53ee13a083 APM_Control: use instance logging and allow AUTOTUNE_LEVEL adjustments 2021-04-15 06:57:16 +10:00
Andrew Tridgell
70c194c358 APM_Control: fixed LoggerDocumentation test 2021-04-15 06:57:16 +10:00
Andrew Tridgell
0b76a8018f APM_Control: move rmax and tau more slowly 2021-04-15 06:57:16 +10:00
Andrew Tridgell
3cb32a18f0 APM_Control: fixed for cygwin build 2021-04-15 06:57:16 +10:00
Andrew Tridgell
364fa0680d APM_Control: use shorter tau for autotune higher levels 2021-04-15 06:57:16 +10:00
Andrew Tridgell
f88622def8 APM_Control: implement new autotune system
use actuator/rate ratio with median filter for FF and Dmod/overshoot
for P,I,D
2021-04-15 06:57:16 +10:00
Andrew Tridgell
12fad55891 APM_Control: fixed pid_info for pitch controller 2021-04-15 06:57:16 +10:00
Andrew Tridgell
ead011c7c2 APM_Control: move to only ACPID 2021-04-15 06:57:16 +10:00
Andrew Tridgell
6ca9033dde APM_Control: run AC_PID in parallel with old PID for roll/pitch 2021-04-15 06:57:16 +10:00
Randy Mackay
f0ffaa5624 AR_AttitudeControl: reset speed filter and I term when stopped 2021-03-04 09:07:32 +09:00
Andrew Tridgell
9a244eef29 APM_Control: added SMAX param docs 2020-10-25 10:32:48 +11:00
Andrew Tridgell
d2a4505184 APM_Control: fixed bug in slew filter 2020-10-25 10:32:48 +11:00
Peter Barker
d20c6ceb3b APM_Control: replace '@User: User' with '@User: Standard' 2020-09-22 14:56:04 +10:00
Randy Mackay
2db57dffac AR_AttitudeControl: update param desc increment and range 2020-09-16 16:49:40 +09:00
Paul Riseborough
548bab5d24 APM_Control: Add gyro feedback limit cycle protection 2020-07-13 13:47:50 +10:00
Mark Whitehorn
442fa60651 APM_Control: validate parameter ARSPD_FBW_MIN 2020-04-02 19:43:06 -07:00
Peter Barker
c9f2b9ff87 AR_AttitudeControl: correct spelling error in param docs 2020-03-16 17:44:35 +11:00
Peter Hall
84fe5f4e78 APM_Control: move to airspeed_estimate with pointer 2020-01-14 22:34:37 -07:00
Peter Hall
c71cbe2729 APM_Control: AR_AttitudeControl: add description for new PID params 2019-09-23 09:45:46 +09:00
Peter Barker
7fbaea7971 APM_Control: wrap_180_cd no longer solely returns floats 2019-09-18 12:57:02 +10:00
Randy Mackay
1b533295a8 AR_AttitudeControl: minor comment fixes 2019-08-06 20:00:05 +09:00
Peter Hall
65d8047165 AR_AttitudeControl: fix sailboat heel PID 2019-08-06 20:00:05 +09:00
Leonard Hall
6f14673f08 APM_Control: support for upgrade to PID object 2019-07-25 17:38:15 +09:00
Leonard Hall
157f786adf Global: rename desired to target in PID info 2019-07-25 17:38:15 +09:00
Peter Barker
cb692c6946 APM_Control: move logger include to .cpp 2019-07-09 10:57:20 +10:00
Andrew Tridgell
05bd0cb9f4 APM_Control: added decay_I() function
used by VTOL planes to decay integrator on fixed wing components when
at very low airspeed
2019-07-07 18:16:47 +10:00
Michael du Breuil
197804412a APM_Control: Fix AP_GPS include 2019-06-18 10:02:05 +10:00
Randy Mackay
a96c146758 AR_AttitudeControl: set-throttle-out-stop considered same as running speed controller
update the speed-last-ms time when set-throttle-out-stop runs or else the desired throttle will not be acceleration limited when the desired speed is next increased above zero
2019-06-08 09:35:36 +09:00
Randy Mackay
4e68d16526 AR_AttitudeControl: use speed_control_active in get_desired_speed_accel_limited
also minor formatting fixes
this is a non-functional change
2019-05-10 06:55:35 +09:00
Randy Mackay
6d4d1bc20a AR_AttitudeControl: add get_turn_rate_from_heading 2019-05-10 06:55:35 +09:00
Randy Mackay
8907b727f6 AR_AttitudeControl: add get_turn_rate_from_lat_accel 2019-05-10 06:55:35 +09:00
Peter Hall
505e1d8c1d APM_Control: AP_RollContorller: move rate limit 2019-05-06 19:16:26 +10:00
Randy Mackay
415042e557 AR_AttitudeControl: minor declaration ordering change 2019-05-04 14:49:32 +09:00
Randy Mackay
f6f5967a82 AR_AttitudeControl: minor param desc fix 2019-05-04 14:49:26 +09:00
Tom Pittenger
0a95785ff0 APM_Control: rename dataflash to logger 2019-03-28 16:40:57 +11:00
IamPete1
49ec059420 APM_Control: add function to relax rover i terms 2019-02-27 08:51:24 +09:00
Tom Pittenger
752804c2a5 APM_Control: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Andrew Tridgell
d7f90963ea APM_Control: fill in Act field of PID logs for plane 2019-01-28 09:38:32 +09:00
Nathan E
548a573803 Update AP_YawController.cpp 2019-01-23 09:24:18 -07:00
Nathan E
f9aac6919c Update AP_RollController.cpp 2019-01-23 09:24:18 -07:00
Nathan E
fbb2252fd9 Update AP_PitchController.cpp 2019-01-23 09:24:18 -07:00
Peter Barker
6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00
Peter Barker
b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Peter Barker
d1f5bcb1ab APM_Control: stop taking reference to dataflash, use singleton 2019-01-18 14:14:22 +11:00
Peter Barker
b276034c60 APM_Control: correct use of incorrect abs functions 2018-10-19 08:46:43 +11:00
IamPete1
e443b864c6 AR_AttitudeControl: add sail heel PID 2018-09-28 10:40:12 +09:00
Andrew Tridgell
3ab7fe348a APM_Control: halve the default pitch D term for planes
this is based on feedback from the 3.9.1 release
2018-09-14 07:32:13 +10:00
Randy Mackay
d7d6c6ab04 AR_AttitudeControl: clarify units of get_steering_out_heading argument
also update comments
2018-09-11 14:39:50 +09:00
Randy Mackay
96097586c3 AR_AttitudeControl: reset I if speed controller not called recently 2018-09-04 15:00:41 +09:00
Randy Mackay
106b8abab7 AR_AttitudeControl: get_throttle_out_from_pitch accepts vehicle speed 2018-08-27 16:44:33 +09:00
Randy Mackay
d5ef3c2e0f AR_AttitudeControl: get_throttle_out_from_pitch uses motor limits
This allows removing I-term build up from throttle hitting 100%
2018-08-27 16:44:33 +09:00
Randy Mackay
65b020eac3 AR_AttitudeControl: re-order pitch control to match other similar methods 2018-08-27 16:44:33 +09:00
Andrew Tridgell
9e2933df89 APM_Control: raised default PID gains for roll/pitch 2018-08-17 20:42:25 +10:00
Randy Mackay
1c18d06aa3 AR_AttitudeControl: move unnecessary else 2018-08-06 11:30:22 +09:00
Randy Mackay
9b60e0844b AR_AttitudeControl: add get_desired_pitch accessor 2018-08-06 11:30:22 +09:00
Ebin
ccb32cf357 APM_Control: BRAKE param default is true 2018-07-20 14:41:32 +10:00
Ebin
1dc1b28234 APM_Control: changed default PID for Balance Bot 2018-07-20 14:41:32 +10:00
Randy Mackay
9eebb6225a AR_AttitudeControl: brake fix to set limit in only one direction 2018-07-19 09:04:50 +08:00
Ebin
30b3d63e8a APM_Control: New default PID values for balance bots 2018-07-06 19:41:09 +10:00
Ebin
ce182fd307 APM_Control: fixed test condition in AR_AttutudeControl.cpp 2018-07-06 19:41:09 +10:00
Ebin
97a260a980 APM_Control: get_throttle_out_from_pitch() accepts dt as argument 2018-06-28 21:55:20 +09:00
Ebin
657ff06380 APM_Control: added balancing function for BalanceBot 2018-06-28 21:55:20 +09:00
Randy Mackay
5e7b37f0b2 AR_AttitudeControl: remove constraint on steering output 2018-06-12 17:44:10 +09:00
Ammarf
b614ca9b75 AR_AttitudeControl: disable limits when _ACCEL_MAX is zero 2018-06-11 08:54:59 +09:00
Randy Mackay
67475a9eaa AR_AttitudeControl: reset turn-rate I term if not run for 0.2sec 2018-06-01 15:06:13 +09:00
disgruntled-patzer
2c41db9e4d AP_RollController.cpp: Updated description of ArduPlane Roll Controller for accuracy
AP_RollController's get_servo_out function does not return an elevator deflection as was previously described in the function comments.
Instead, it should return an aileron deflection. Thus, the function description should be updated to reflect this more accurately
2018-05-30 09:46:08 +09:00
Randy Mackay
e691b680ca AR_AttitudeControl: add speed-control-active method
allows caller check if speed controller if active
also consolidated other methods to use this check to reduce a little bit of duplicate code
2018-05-29 16:37:31 +09:00
Randy Mackay
3b71d0360a AR_AttitudeControl: const get_decel_max and get_stopping_distance 2018-05-29 16:37:31 +09:00
Michael du Breuil
84b1a6a58b APM_Control: Supress some compilier warnings about strncpy 2018-05-29 00:10:40 +01:00
Randy Mackay
a7fbfe7767 AR_AttitudeControl: caller provides dt instead of calculated internally
This allows the vehicle's main loop rate to be used instead of an internally calculated dt which suffers from jitter
2018-05-24 11:06:20 +09:00
Randy Mackay
c032095c80 AR_AttitudeControl: reduce default accel max to 2m/s/s 2018-05-24 11:06:20 +09:00
Randy Mackay
856d592b1d AR_AttitudeControl: accel limit stops 2018-05-24 11:06:20 +09:00