Commit Graph

2733 Commits

Author SHA1 Message Date
Andrew Tridgell 7c888f4a12 Plane: removed old elevon and vtail mixers
now only use the function based mixing, and auto-convert on startup
2017-08-02 12:49:12 +10:00
Andrew Tridgell 5c10d81f60 Plane: always setup target airspeed
this sets up a target airspeed even when flying without an airspeed
sensor. This is needed for quadplanes without airspeed sensors where
we use synthetic airspeed during the transition in TECS
2017-08-02 12:49:11 +10:00
Andrew Tridgell 96ad5e8f62 Plane: don't start a transition while disarmed
this can caused flooding of the GCS console while disarmed in FBWA
mode
2017-08-02 12:49:10 +10:00
Peter Barker 4290c6ab9a Plane: camera is responsible for taking distance-based-images and logging 2017-08-02 12:49:09 +10:00
Patrick José Pereira 60834e9af0 Plane: Allow a second activation of parachute
The hardware can fail in the first activation,
this patch allow a second chance to active the parachute successfully.

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-07-26 17:51:34 +01:00
Peter Barker 87af817893 Plane: handle common GPS messages in base GCS_MAVLINK class 2017-07-25 14:00:45 +01:00
Peter Barker fa39f315c6 Plane: move starting of new logs into DataFlash 2017-07-19 16:37:28 +01:00
Peter Barker ea892d278f Plane: remove MSG_STATUSTEXT entirely 2017-07-18 16:12:59 +01:00
Michael du Breuil f87a69dcf2 Plane: Throttle based landing aborts should ask the landing library
Throttle based aborts should be requesting a go around from AP_Landing.
This was missed in the initial port.
2017-07-17 08:43:50 -07:00
Peter Barker 7f0cb82797 Plane: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up 2017-07-17 14:17:19 +01:00
Peter Barker 6047026b11 Plane: move handling of MAG_CAL command longs up 2017-07-17 14:17:19 +01:00
Peter Barker 2b6752e0b4 Plane: move MAV_CMD_START_RX_PAIR handling to base class 2017-07-17 14:17:19 +01:00
Peter Barker 7042d3e9c9 Global: all vehicles get AP_Relay and AP_ServoRelayEvent libraries 2017-07-17 00:06:31 +01:00
Peter Barker 36eab56178 Plane: move mavlink support for servo/relay up 2017-07-16 23:56:00 +01:00
Peter Barker 3af52d9db3 Plane: add common handling of mavlink command messages 2017-07-16 23:56:00 +01:00
Michael du Breuil b8e6ad7476 Plane: Document loop max time as being in microseconds 2017-07-15 17:27:04 +09:00
Peter Barker 983686745e Plane: move rally-point handling up 2017-07-14 01:28:05 +01:00
Peter Barker a250f47f13 Plane: remove unneeded telemetry_delayed parameter 2017-07-12 17:01:36 +01:00
Peter Barker c9c4b31e99 Plane: move handling of incoming statutext messages up 2017-07-12 16:52:24 +01:00
Peter Barker c058fba5ac Plane: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 592729733e Copter: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 1be52495f1 Plane: eliminate global static GCS_MAVLINK::send_home_all 2017-07-11 23:48:39 +01:00
Peter Barker d850feb75f Plane: move common mission handling up to GCS_MAVLINK 2017-07-11 23:45:17 +01:00
Peter Barker 250f315678 Plane: eliminate gcs_send_mission_item_reached wrapper 2017-07-11 23:45:16 +01:00
Peter Barker 3b0a7703c4 Plane: eliminate gcs_send_message wrapper 2017-07-11 23:45:16 +01:00
Peter Barker 5a8f01c19c Plane: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
Peter Barker 685706952c ArduPlane: use Notify singleton for sending statustext 2017-07-09 17:17:29 -04:00
Peter Barker 5b3b61a2e4 Plane: move GCS functions up to superclass GCS 2017-07-07 16:18:37 +01:00
Andrew Tridgell 1d626db3b1 Plane: use scaled outputs for AFS failsafe
we need to use scaled outputs so that derived outputs (such as elevons
and vtail) have a valid input to use
2017-07-04 07:59:28 +10:00
Peter Barker 923b201025 Plane: send servos outputs after flaperon update 2017-07-04 07:59:28 +10:00
Peter Barker 38921c4f1a Plane: correct AFS terminate for rcin/servos split 2017-07-04 07:59:28 +10:00
Eugene Shamaev b95ebadf8b ArduPlane: move of CAN parameters into separate group 2017-07-03 11:44:32 +01:00
Andrew Tridgell b2cd5f5c06 Plane: release 3.8.0beta5 2017-07-03 11:39:48 +10:00
Andrew Tridgell d3f9afd4e7 Plane: fixed auto-adjustment of flaperon trim 2017-07-03 11:17:42 +10:00
Andrew Tridgell 2cb511c049 Plane: deprecate old aileron_with_input and elevator_with_input
these have very rarely been used and don't work well with new trimming
mechanisms. Now treat them as ordinary ailerons/elevators
2017-07-03 11:17:42 +10:00
Andrew Tridgell 51b39ea3a1 Plane: removed ancient "mix_mode" type elevon mixing
this has been deprecated for a long time
2017-07-03 11:17:42 +10:00
Andrew Tridgell 725244ff8a Plane: implement new TRIM_AUTO functionality
this fixes TRIM_AUTO for new scaled output approach to servo functions
2017-07-03 11:17:42 +10:00
Andrew Tridgell 984e887d1d Plane: changed differential spoilers to scaled outputs
this matches new elevon, vtail and flaperon code
2017-07-03 11:17:42 +10:00
Andrew Tridgell c9e4423997 Plane: re-implement flaperons
implement as scaled output instead of PWM output

this will break some peoples setups, but gives much easier setup and
more consistent behaviour
2017-07-03 11:17:42 +10:00
Peter Barker 1ca5f243a5 Plane: check dataflash to see if we should log backend gps messages 2017-06-29 15:43:38 +01:00
Peter Barker 949e07c7e3 Plane: use DataFlash should_log to determine raw IMU logging 2017-06-29 15:26:27 +01:00
Peter Barker 88a7167cb9 Plane: move should_log check of log bitmask into DataFlash 2017-06-29 15:26:27 +01:00
Peter Barker 5b70b688cb Plane: handle knowledge of in_log_download in DataFlash 2017-06-27 03:10:43 +01:00
Peter Barker 60ebd099bd Plane: move send-logs-via-mavlink code into DataFlash 2017-06-27 03:10:43 +01:00
Michael du Breuil 8691eae679 Plane: Handle NAV_CONTROLLER_OUTPUT.wp_dist overflowing 2017-06-20 15:41:50 +01:00
Andrew Tridgell 0b40e853c9 Plane: call set_likely_flying() 2017-06-20 09:44:44 +10:00
Peter Barker ceec44350f Plane: move MAVLINK_MSG_ID_REMOTE_LOG_BLOCK_STATUS handling up 2017-06-17 15:07:48 +01:00
Michael du Breuil 92cdb54176 Plane: Fix a fly away when aborting a landing
DO_LAND_START -> LAND waypoints in sequence would cause a perpetual abort state
due to the sticky nature of the abort states. If we restart a landing on
purpose while doing an abort, then we can move onto trying to land again.
2017-06-17 09:10:27 +10:00
Peter Barker 30dfd32b87 Plane: stop using in_mavlink_delay as a proxy for disabling logging 2017-06-16 17:07:48 +01:00
Peter Barker b57a4e9685 Plane: call dataflash should_log method 2017-06-16 17:07:48 +01:00