uncrustify
e6c2616769
uncrustify libraries/AP_InertialSensor/AP_InertialSensor_MPU6000.cpp
2012-08-21 19:03:14 -07:00
Andrew Tridgell
0763bbd1af
MPU6000: fixed some build warnings
2012-08-09 16:19:21 +10:00
rmackay9
5077674043
AP_InertialSensor_MPU6000: another attempt at fixing the SITL build
2012-07-28 17:19:19 +09:00
rmackay9
7683e9d870
AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully)
...
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
2012-07-28 16:33:04 +09:00
rmackay9
6cd0918134
AP_InertialSensor: methods added to access DMP functionality
2012-07-28 14:14:43 +09:00
Craig Elder
69bf5700cd
IMU: expose IMU_PRODUCT_ID as EEPROM Variable
...
this will allow us to log the Product ID in tlogs
2012-05-09 18:30:36 -07:00
Craig Elder
4a1d8b0875
AP_InertialSensor: Return product ID from sensor initialization
...
this exposes the product ID to the IMU Layer
2012-05-09 18:30:36 -07:00
Craig Elder
ed99940bee
MPU6000: Fixed Scaling on Accelerometers Rev C vs Rev D
...
Rev C have non standard scaling factor that is 1/2 of the data sheet
Rev D chips conform to the specification
2012-05-09 18:30:35 -07:00
Andrew Tridgell
2dd655d87d
MPU6k: added suspend/resume on init
2012-05-01 12:06:54 +10:00
Andrew Tridgell
9296ac494d
AP_InertialSensor: added a get_gyro_drift_rate() interface
...
this returns the expected max drift rate for the particular type of
gyro being used
2012-03-10 10:34:33 +11:00
Andrew Tridgell
a9dea35310
AP_InertialSensor: added new_data_available() interface
2012-03-10 10:34:28 +11:00
Randy Mackay
ed19c25a97
Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h".
...
Modified FastSerial's write function to return size_t (number of bytes written).
2012-01-28 12:25:47 +09:00
Andrew Tridgell
6ca613337b
MPU6000: protect the driver from double initialisation
...
initialising twice can lockup the driver
2011-12-28 16:00:48 +11:00
Andrew Tridgell
18d26dc74e
MPU6000: minor fixes
...
the hardware functions should be private, and cs_pin should be uint8_t
2011-12-28 16:00:48 +11:00
Andrew Tridgell
04daeab7c0
MPU6000: change to 98Hz low pass filter
...
based on recommendation from Pat
2011-12-26 19:17:11 +11:00
Andrew Tridgell
10ca54ef8f
MPU6000: use data ready interrupt to prevent stale data
...
We listen for a data ready interrupt and only read new data in read()
if there is new data
2011-12-26 19:17:11 +11:00
Andrew Tridgell
f97b405b56
MPU6k: update driver for new ap_proceduce prototype
2011-12-21 23:31:38 +11:00
Andrew Tridgell
bc9e943969
rollover is not a bug
...
subtracting unsigned numbers does the right thing
2011-12-21 23:31:38 +11:00
Andrew Tridgell
97f8d21c1b
added code format markers to AP_InertialSensor library
2011-12-21 23:31:38 +11:00
Pat Hickey
f3ad7f3af8
Wire and SPI Init: move to sketch system.pde from libraries
...
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin removed from AP_Baro_MS5611::init()
* SPI.begin removed from AP_InertialSensor_MPU6000::hardware_init()
* Both Wire.begin and SPI.begin added very early in init_ardupilot in
ArduCopter/system.pde and ArduPlane/system.pde
2011-12-11 15:21:10 -08:00
Pat Hickey
82b48784ef
purple: added AP_InertialSensor library
...
this abstracts the way of getting inertial sensor (gyro and
accelerometer) data for the APM1 and purple hardware. The Oilpan code
is based closely on the old APM1 code
2011-11-25 20:00:16 -08:00