Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-03 14:38:30 -04:00
Code Issues Packages Projects Releases Wiki Activity
47,960 Commits 71 Branches 509 Tags 753 MiB
76f5db93dc
Commit Graph

6746 Commits

Author SHA1 Message Date
Jason Short
37685756df Config.h: 
decreased alt hold_P to .4
removed RTL_AUTO_LAND default
increased alt hold I
 2012-07-03 17:37:37 -07:00
Jason Short
c29a0bc3f8 Navigation 
increased speed governor to get faster WP travel
added param for WP tilt - basically a precalculated I term for wind resistance.
 2012-07-03 17:34:50 -07:00
Jason Short
3a3966736c Params 
Added Tilt_Compensation to Params,
deprecated RTL_Land_Enabeled
RTL_Approach_alt is not int16_t, -1 means do noting. 0 means land, >1 means hover to that altitude after timeout.
 2012-07-03 17:33:03 -07:00
Jason Short
8ccda519fa Arducopter.pde: 
Added note about -1 to disable feature
Set RTL_Atl by default after reaching home in case we're at the wrong alt.
increased speed of Yaw rotation for WPs
 2012-07-03 17:21:46 -07:00
Jason Short
b076b571eb commands_logic: Removed some old unused code 2012-07-03 17:19:19 -07:00
Jason Short
2d572461ec Config: increased WP distance to 2m but default, removed alt hold D: causing issues with APM1 noise. 2012-07-03 17:18:33 -07:00
Jason Short
1070eea70b Log.pde: formatting 2012-07-03 17:16:26 -07:00
Jason Short
1a6549fef7 removed GPS ground speed calc - was causing some funny business during the transition. 2012-07-03 17:16:14 -07:00
Jason Short
c62706ad06 Toy Mode: Yaw performance update. 2012-07-03 17:14:54 -07:00
Jason Short
8a08a74cc6 Config.h : shortening the landing time to 10s 2012-07-02 17:52:38 -07:00
Jason Short
16b25a26c2 Toy Mode: removed virtual WP, copter now just goes into auto_loiter when not holding the sticks. 2012-07-02 17:52:38 -07:00
Jason Short
e0b3309500 Yaw mode: 
Improved hybrid Yaw mode:
- uses rate controller rather than as fast as possible
- waits 1.5 seconds before entering hold
- bounce free
 2012-07-01 13:40:12 -07:00
Jason Short
9a30270879 System.pde - RTL 
removed Approach mode, fixed RTL to loiter until desired altitude is reached
 2012-07-01 13:40:12 -07:00
Jason Short
e35fb9ecd7 Parameters 
removed unused parameters for retro loiter
 2012-07-01 13:40:12 -07:00
Jason Short
3cf16c1424 GCS_Mavlink.pde 
removed Approach define
 2012-07-01 13:40:11 -07:00
Jason Short
ab564b8a86 defines.h 
removed Approach mode enumeration
 2012-07-01 13:40:11 -07:00
Jason Short
3646d69faf read_control_switch 
Removed Prev_WP reference. unneeded.
 2012-07-01 13:40:11 -07:00
Jason Short
8ab1acfb92 Config.h 
Removed Approach delay redundancy - using land timer instead
Removed Retro loiter mode param
 2012-07-01 13:40:11 -07:00
Jason Short
2ad08fdd98 RTL: Commands.pde 
When we are out of commands we land or Loiter at the RTL_Approach_altitude.
 2012-07-01 13:40:11 -07:00
Jason Short
d58ceb2b09 RTL: Commands.pde 
Removed do_approach function - now redundant
 2012-07-01 13:40:11 -07:00
Jason Short
c5617eeeac Arducopter.pde_RTL: 
added a new RTL function that goes into Loiter, first, checks if we have reached RTL_Altitude, then enters WP mode to come home.
Removes Approach mode. Uses Auto_Approach value to decide if we should land or descend to a certain altitude
 2012-07-01 13:40:11 -07:00
Jason Short
2450c25544 Arducopter: enabled RTL_altitude, renamed function to be more accurate 2012-07-01 13:40:11 -07:00
Jason Short
2e8eee9306 Added code for self centering throttle - disabled by default. 2012-07-01 13:40:11 -07:00
Andrew Tridgell
82ede937e7 AnalogSource: convert analogRead() calls to the new API 
this should give us much better analog values, plus save a bunch of
CPU time
 2012-07-01 15:01:05 +10:00
rmackay9
78fa903e17 ArduCopter: updated STABILIZE_ROLL_I to 0.01 (was 0.1) as instructed by Marco 2012-06-30 19:26:14 +09:00
Jason Short
4d6ccccef5 Circle_WP distance check fix 2012-06-29 21:20:28 -07:00
Jason Short
59d16f5fe0 Commands.pde: increased bad WP distance check 2012-06-29 21:20:28 -07:00
Jason Short
eea788b63f navigation.pde : Added a drag/velocity prediction filter for improved I term wind correction. 2012-06-29 21:20:28 -07:00
Jason Short
031830b5fe System.pde: Toy mode details for set_mode() 2012-06-29 21:20:28 -07:00
Jason Short
c276fe8fa0 GCS_Mavlink: added notes to #if malink10 2012-06-29 21:20:28 -07:00
Jason Short
0011190880 defines.h: Toy Mode defines for flight modes 2012-06-29 21:20:28 -07:00
Jason Short
4450d80ea3 Config.h: Optimizing Nav gains 2012-06-29 21:20:28 -07:00
Jason Short
3ce867508b Attitude.pde: Toy mode logic 2012-06-29 21:20:27 -07:00
Jason Short
668135ea8b Arducopter.pde: Added Toy mode refinements 2012-06-29 21:20:27 -07:00
Jason Short
49401bffae Params: Added toy_yate_rate 2012-06-29 21:20:27 -07:00
Jason Short
5e4d28baf0 Added Toy mode to navigation 2012-06-29 21:20:27 -07:00
Jason Short
e036bee424 Aeducopter.pde: Toy mode updates 2012-06-29 21:20:27 -07:00
Adam M Rivera
61baa666c4 commands_process.pde: Bug fix 427. By default, the copter would land after an AUTO mission. Updated to check for valid approach altitude at end of mission. 2012-06-29 21:41:56 -05:00
Andrew Tridgell
55092c25a6 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Adam M Rivera
dadc7d5a7d ArduCopter: Loiter Timer should have been set when the approach altitude was set. Previously, land had to be enabled before auto approach would work. 2012-06-28 20:34:53 -05:00
Andrew Tridgell
33440567e6 ACM: ArduCopter updates for new compass interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell
dae1a57dc5 ACM: adapt the ArduCopter code for new barometer interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell
b676caa626 ACM: enable GPS in AHRS for ArduCopter 
this is an experiment in centripetal correction for multicopters
 2012-06-27 16:01:49 +10:00
Jason Short
eeab4c5363 Attitude.pde: Turned off boost_p for nav_throttle based on Testing feedback from Marco. 2012-06-26 10:39:42 -07:00
Jason Short
c76ac4543b Added user editable define for Super simple radius 2012-06-26 10:38:46 -07:00
rmackay9
068fe64b9b ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float) 2012-06-26 22:50:17 +09:00
Jason Short
812bf7d874 Attitude.pde - Added small boost to alt hold for takeoff. 2012-06-25 23:12:19 -07:00
Jason Short
46fb3b783a GCS_Mavlink.pde : mav_nav only used in legacy Mavlink. 2012-06-25 23:08:25 -07:00
Jason Short
cd93c40f09 Added Toy Mode control 2012-06-25 23:08:25 -07:00
Jason Short
807c4ced34 Added Toy Mode defines 2012-06-25 23:08:25 -07:00
Jason Short
80d15368bc Arducopter.pde : Added Approach mode, added "Toy" mode fun code I'm playing with. 
Added landing code to make landing happen closer to home loc
Added check for distance to Loiter WP before overriding a new Loiter position.
Moved calc_loiter_pitch_roll() to 50 hz.
removed the nav_bearing var - not used with new crosstrack.
 2012-06-25 23:08:25 -07:00
Jason Short
7f92d702ab commands.pde: fixed unit error for distance check 2012-06-25 23:06:28 -07:00
Jason Short
a0dc1f7ab1 Config.h : New Gains based on testing, new Crosstrack gain. from 1.0 to .2 because of new algorithm 2012-06-25 23:06:28 -07:00
Jason Short
c71c503c84 GCS Mavlink.pde: change reference to nav_bearing to target_bearing. 2012-06-25 23:06:28 -07:00
Jason Short
53d2a46cd6 Navigation.pde : removed old cross tracking from Arduplane. Added new 2D cross tracking. Added use of GPS velocity when above 1.5m/s 2012-06-25 23:06:28 -07:00
Jason Short
92d481c08c inertia.pde: WIP don't fly with inertia enabled until FN. 2012-06-25 23:06:28 -07:00
Jason Short
28829b0d60 Log.pde: removed nav_bearing reference and replaced with target_bearing ref 2012-06-25 23:06:28 -07:00
Andreas M. Antonopoulos
bef005b5f2 AC2.6: Fix battery calculation and scaling bug for MAV1.0, now same as ArduPlane 
http://code.google.com/p/arducopter/issues/detail?id=430
 2012-06-24 17:01:25 -07:00
Robert Lefebvre
1064dcbd34 Open up constraint on Rate Yaw Output for all copters. 2012-06-22 10:06:01 -04:00
Jason Short
7e0708ca36 Config.h - returned low to original 120 2012-06-20 15:22:35 -07:00
Jason Short
839b8865aa Parameters.h: throttle_min and throttle_max now have defaults from Config.h 2012-06-20 15:02:00 -07:00
Jason Short
efdf0a7fc8 changed define to a param for throttle_min and throttle_max 2012-06-20 15:00:53 -07:00
Jason Short
e8510faf5d changed define to param for throttle_min 2012-06-20 15:00:05 -07:00
Jason Short
6020f6d9fa Added throttle_min as a user definable param 2012-06-20 14:58:34 -07:00
Jason Short
4f18e7f80b lowered minimum throttle 2012-06-20 08:47:47 -07:00
Jason Short
27e0aee03f Small fix to angle boost - increases by about 20% to deal with inefficiencies of non-downward thrust 2012-06-20 08:47:47 -07:00
Jason Short
39a253a273 decreased I term based on the tests last weekend in high winds 2012-06-20 08:47:47 -07:00
Jason Short
8b212d8baa Adjustments to the Inertial_nav 
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
 2012-06-20 08:47:47 -07:00
Andrew Tridgell
58379b928f MAVLink: make usage of MAVLink defines more consistent 2012-06-15 16:27:11 +10:00
rmackay9
c62cc4844e ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release 2012-06-15 00:42:59 +09:00
Jason Short
e31a1d969f Inertial Nav disabled by default 2012-06-13 22:37:52 -07:00
Jason Short
c42f9ece43 Inertial Control 
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
 2012-06-13 22:34:45 -07:00
rmackay9
65050775e1 ArduCopter: made Robert's new yaw method optional (off by default). 
Add this line to APM_Config.h to enable Robert's yaw
#define ALTERNATIVE_YAW_MODE ENABLED
 2012-06-13 21:50:16 +09:00
Jason Short
ff0659535e Raised the Max throttle to 1000, min to 200. Worked good in SIM with Tridge's motor safety patch. 2012-06-12 13:58:49 -07:00
rmackay9
e1acf21381 ArduCopter: updated firmware version to 2.6 Epsilon 2012-06-12 23:22:57 +09:00
rmackay9
c6f1d93849 ArduCopter: updated standard loiter pids. 
Loiter_P (speed from distance to target) = 0.2 (was 0.35)
Loiter_Rate_P (lean angle from desired acceleration) = 2.4 (was 2.5)
Loiter_Rate_I = unchanged at 0.08
Loiter_Rate_D = 0.40 (was 0.45)
 2012-06-12 20:56:31 +09:00
Jason Short
f5a85d48a0 Added Angel's name to contrib list 2012-06-10 12:38:22 -07:00
Andrew Tridgell
940d994efb GPS: Use appropiate GPS_ENGINE settings in APM, ACM and rover 2012-06-10 16:36:18 +10:00
rmackay9
aeaebb21d5 ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release) 2012-06-08 21:54:09 +09:00
Andrew Tridgell
a684bddbda GPS: open the GPS serial port with a 256 byte buffer 
the UBLOX needs more than 128 bytes for reliable parsing
 2012-06-08 16:42:03 +10:00
Robert Lefebvre
c5916a8b4d Opening up the Yaw Rate constraint for Trad Heli. 2012-06-07 22:40:25 -04:00
Robert Lefebvre
e2496181ff Yaw Fix 
Modified Nav_Yaw controller to better track intended heading changes.
 2012-06-07 17:15:33 -04:00
Jason Short
a9610a0761 Stabilization patches 
removed Angle error limit for stabilization
constricted Iterm to +- 5° error and limited the implementation to when the quad is +- 5° from center
doubled the output limit for Rate controller.
increased default Rate_P gain to .18 with matching Rate_D of .004
Tested in the SIM and in backyard. dramatically increases performance and quad no longer overshoots and flips when pushed hard.
 2012-06-05 16:41:44 -07:00
rmackay9
70b04d9427 ArduCopter: updated firmware description to 2.6 Gamma 2012-06-05 21:28:13 +09:00
Andrew Tridgell
8b258e23e7 ACM: prevent link flood with "Low Battery" warnings 
thanks to Marco for noticing this
 2012-06-05 11:31:40 +10:00
Michael Oborne
14be88dd55 AC: add hilstate message 2012-06-04 16:24:08 +08:00
Jason Short
71f80f3a77 Bug fix: When adjusting altitude, RTL then land will fail unless this var is reset to false. 2012-06-03 22:25:27 -07:00
Jason Short
1b9f75c844 Updates to Flip: 
Ability to abort flip mode if things go wrong
init function to re-enter flip mode if aborted
 2012-06-03 22:15:19 -07:00
Andrew Tridgell
7c63d2c17b ACM: MAVLINK10 uses HIL_STATE 
thanks to Michael for noticing this
 2012-06-04 13:31:07 +10:00
Andrew Tridgell
e7cf643386 added mavlink09 targets 
allows easier building with mavlink0.9
 2012-06-04 13:14:52 +10:00
Andrew Tridgell
3f4e87cccc ACM: fixed HIL build for MAVLINK10 2012-06-04 13:14:52 +10:00
Michael Oborne
9303a89573 fix AC hil build 2012-06-04 11:12:52 +08:00
Michael Oborne
a71ed6c5ce enable mavlink10 by default 2012-06-04 08:02:08 +08:00
Jason Short
15aea320cb Added note to remove this unused param 2012-06-03 11:13:50 -07:00
Jason Short
12ab875d58 using current PWM rather than a re-read of the PWM. 2012-06-03 11:13:50 -07:00
Jason Short
9ab06c5542 Moved PID logging counter into define 2012-06-03 11:13:50 -07:00
rmackay9
72d76558a7 ArduCopter: Ensure update_GPS does nothing when gps is disabled. 
This fixes a bug in which an APM without a GPS would not work because it would constantly scan for a valid GPS long after it should have given up and moved on.
 2012-06-03 23:48:45 +09:00
rmackay9
fd6b21d0c7 ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing 2012-06-03 17:02:35 +09:00
rmackay9
4544b37fec ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing 2012-06-03 16:59:23 +09:00
rmackay9
dcdeae412e ArduCopter: Another attempt at fixing the lat/lon printing bug in which small negative lattitudes or longitudes were appearing as positives. 
Fixed in both ArduCopter Log.pde and the GPS Auto test sketch
 2012-06-03 16:58:19 +09:00
rmackay9
2a216ce900 ArduCopter: fixed print_latlon bug in which it would print negative lat/lon numbers incorrectly (i.e. -1234567890 would be printed as -124.xxx). 2012-06-02 12:51:12 +09:00
Jason Short
c2d14a5cad RC_Channel fix for throttle output. 
throttle was outputting incorrectly and allowing the user to max out the throttle leaving nothing for attitude control
 2012-05-31 14:59:03 -07:00
Robert Lefebvre
5f058fb9b2 TradHeli: Incorporating Ext ESC Control 2012-05-30 21:50:25 -04:00
Robert Lefebvre
30e55533dc Change to increase Parameter space as we have run out. 
This will decrease the max number of waypoints from 186
to 169.
 2012-05-30 20:41:53 -04:00
Jason Short
dec6f0ca62 When RTLing, force home as the final location for loiter. 2012-05-30 11:06:41 -07:00
Jason Short
bc578172a5 moved detector to run until the throttle is low, then stop running. 2012-05-30 09:44:59 -07:00
Jason Short
f0456dc947 Missed a Semicolon 2012-05-30 09:36:16 -07:00
Jason Short
302c632205 Altered the ground detector logic to no continuously run when landed 2012-05-30 09:34:31 -07:00
Jason Short
22065e3f3f Broken timer - removed 2012-05-29 12:56:38 -07:00
Jason Short
0ce883b96a Removed unused variable 2012-05-29 12:43:23 -07:00
Jason Short
9310d613e1 Lowered I term - causes oscillations in SIM 2012-05-29 12:43:01 -07:00
Jason Short
2311d52d37 Renamed some variables to clarify functionality. 2012-05-29 12:42:37 -07:00
Jason Short
7c6f766251 Speed up automatic disarming to 25 seconds for safety. 
renamed AUTO_ARMING_DELAY to AUTO_DISARMING_DELAY
 2012-05-29 12:41:35 -07:00
Jason Short
f491f5e9ca Removed references to a takeoff timer 2012-05-29 11:28:40 -07:00
Jason Short
15774366ba Failsafe: Looking for takeoff_complete now vs unreliable GPS 2012-05-29 11:25:04 -07:00
Jason Short
08bf04dd08 pulling throttle low in flight turns out to be more common than thought. Removed clearing of takeoff_complete flag. This is still cleared during disarm which is automatic after 30 seconds of no throttle. 2012-05-29 11:25:04 -07:00
Jason Short
09f4a16bfb changed the way takeoff complete is figured. Looking for high throttle. 2012-05-29 11:25:04 -07:00
Jason Short
b8349f5486 Added note to functionality 2012-05-29 11:25:04 -07:00
Jason Short
9d92602188 changed WP radius to AP_Int16 2012-05-28 22:39:29 -07:00
Jason Short
5754f97433 reversed circle_WP calculation so the next_WP refers to the destination around the circle and circle_WP refers to the center. The intent is to make it easier to see via ground station. 2012-05-27 09:21:20 -07:00
Jason Short
7df1aa2914 Arducopter.pde : setting rtl_approach_alt above 1 would force auto landing even if auto-landing was disabled. 2012-05-23 22:00:56 -07:00
Andrew Tridgell
d9457ecc38 MAVLink: send time of GPS fix accurately 
when we send a GPS_RAW message, set the usec field to the time we got
the fix from the GPS, not the current time. This makes it possible for
aerial photo processing to be more accurate, as the usec field with
more accurately reflect the planes position/time pair
 2012-05-23 17:33:33 +10:00
Andrew Tridgell
66544a5db2 Log: don't print '+' while erasing logs 
we no longer do page based erase, so printing a + every 128 pages
makes no sense
 2012-05-22 20:10:29 -07:00
Robert Lefebvre
4e4ff84cf1 Updates to CopterLEDS 
Creation of Nav Blink Function.
 2012-05-22 09:58:37 -04:00
Andrew Tridgell
422dc82f32 MAVLink: allow parameter fetch during mavlink_delay() 
this allows the planner to fully connect to the APM with MAVLink while
doing a DataFlash erase
 2012-05-22 16:13:35 +10:00
Jason Short
1b9f34e4e0 Flip.pde: renamed dcm to ahrs 2012-05-21 12:58:51 -07:00
Jason Short
5407acdb4c Some bug fixes to Auto-flip. I ran this code through the sim and found these flaws. 2012-05-21 11:07:41 -07:00
Jason Short
f6d8a18182 Added note 2012-05-21 09:58:23 -07:00
Jason Short
1a5e2f4e37 Attitude.pde - Removed rate limit based on SIM flights. These should never have been in place and seriously detriment Acro flight. 2012-05-21 09:58:23 -07:00
Jason Short
8d075015e1 added check for duplicate time-stamped GPS messages. 2012-05-18 09:54:18 -07:00
Jason Short
9732b7d2dc navigation.pde: 
removed unneeded WP_Distance check
remove unneeded return for Navigate
removed unneeded rate_D calcs
removed unused functions
 2012-05-17 11:05:05 -07:00
Jason Short
7e190c6f5c Arducopter.pde : 
removed unneeded d_rate_filters
updated Nav routine to handle faster GPS updates
moved calc_XY_velocity to GPS read
added check for duplicate GPS reads
 2012-05-17 11:05:05 -07:00
Jason Short
d1cd04486a removed retro loiter code since Angel has a branch now. 
shrank speed filter to avoid latency
removed unused forward estimator code

placed code for switchover to gps.groundspeed at 1.5m/s

added clamp for D term when below .5m/s to eliminate noise

added hybrid I-term based on speed error and position

changes Loiter D term to use position rather than acceleration to avoid noise
 2012-05-15 22:14:23 -07:00
Jason Short
7f3e142fa8 Loiter Gains based on new SIM 2012-05-15 22:01:01 -07:00
Robert Lefebvre
c5f7b2fff2 Fixed Syntax error. 2012-05-15 12:35:35 -04:00
Robert Lefebvre
c8fb9a6635 More CopterLEDS changes. 
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2.  Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2.  Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code.  Legacy users should see no difference.
 2012-05-15 12:00:21 -04:00
Robert Lefebvre
a285e2779f CopterLEDS changes for APM2 2012-05-15 10:07:03 -04:00
rmackay9
357d6c2d9b ArduCopter: bug fix for reversing tri servo 
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
 2012-05-13 12:36:46 +09:00
rmackay9
2f74004fcb ArduCopter: updated version to 2.5.5 2012-05-13 08:47:43 +09:00
rmackay9
af86ae8cbf ArduCopter: fixed compile error by declaring extern print_latlon 2012-04-30 21:44:27 +09:00
Andrew Tridgell
435a64b97e ACM: fixed HIL build 2012-04-30 22:42:17 +10:00
rmackay9
a1f5661161 ArduCopter: restored gps test in CLI 
Added check so not enabled when using 1280.  Also fixed comments in other tests to explain the check for the 1280.
 2012-04-30 17:29:50 +09:00
Adam M Rivera
56d3fa1601 Parameters.pde/AP_MotorsHeli: Updated comments to leverage the new value aliases 2012-04-28 20:50:41 -05:00
Adam M Rivera
40fdba441b Parameters.pde: Added value aliases to comments 2012-04-28 20:35:22 -05:00
Adam M Rivera
941cf6fa69 Parameters.pde: Added more parameter comments. 2012-04-28 12:14:17 -05:00
Andrew Tridgell
67afdc7485 autotest: fixes for MAVLink 1.0 in autotest 2012-04-27 15:15:53 +10:00
Adam M Rivera
239323eaa4 Parameters.pde/AP_MotorsHeli.cpp: Added comments from Roberts clone. 2012-04-26 18:26:14 -05:00
Adam M Rivera
cb6f97fc7f Changed the marker for Group parameters to @Group. 2012-04-25 12:27:51 -05:00
Adam M Rivera
51bcc73c77 Parameters.pde: Added lib comments. 2012-04-25 11:23:46 -05:00
Adam M Rivera
9fb9231ec4 Merge branch 'master' of https://code.google.com/p/ardupilot-mega into param-suffix 2012-04-24 14:11:54 -05:00
Adam M Rivera
29fec278eb Parameters.pde: Updated comment schema to include the parameter name which becomes the XML node that contains the meta data. 2012-04-24 13:11:16 -05:00
Adam M Rivera
acab9b7c2c Parameters.pde: Added new comment structure to a few parameters for testing. 2012-04-24 11:37:33 -05:00
Andrew Tridgell
4fee26437b MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI 2012-04-24 22:24:58 +10:00
Andrew Tridgell
fe970221e2 ACM: added support for MAVLink 1.0 to ArduCopter 
most operations should now work
 2012-04-24 19:54:20 +10:00
Adam M Rivera
b2a7227ae7 ArduCopter/Navigation: Updated code to reference the new g.retro_loiter param instead of the compile define. 2012-04-23 00:19:18 -05:00
Adam M Rivera
60c347e23b Parameters: Added g.retro_loiter which is configurable by the user via the MP. 2012-04-23 00:17:52 -05:00
Adam M Rivera
8e580729b7 config.h: Removed comment. 2012-04-23 00:16:41 -05:00
Adam M Rivera
97040a7b3a Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach 2012-04-23 00:03:37 -05:00
Jason Short
9c19138fb8 Log.pde : Updated Flash Logging to log Floats properly vs scaled integers. 2012-04-21 15:25:53 -07:00
Jason Short
e22832a832 Added a union for casting floats to ints and back when storing Floats to the DataFlash 2012-04-21 15:17:09 -07:00
rmackay9
090f5aaa6f ArduCopter - config.h - set standard RC_SPEED to 125 for helicopter frame 2012-04-21 23:46:36 +09:00
rmackay9
c993049c48 ArduCopter - combined CH6_DAMP and CH6_STABILIZE_KD tuning parameters to avoid confusion 2012-04-21 23:24:57 +09:00
rmackay9
533772339e ArduCopter - Attitude.pde - added logging of optical flow pid controller 2012-04-21 20:17:12 +09:00
rmackay9
3e95ade004 ArduCopter - changed optflow object to be APM2 version if necessary 2012-04-21 20:15:55 +09:00
rmackay9
919f004b27 ArduCopter - changed Optical Flow for APM2 to use A3 pin 2012-04-21 20:15:16 +09:00
Adam M Rivera
7d13371acf Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach 2012-04-20 11:45:38 -05:00
rmackay9
f0a9209935 ArduCopter - regressed version back to 2.5.4 2012-04-20 21:58:32 +09:00
James Goppert
5390467f3d Worked on ArduCopter cmake options. 2012-04-19 16:05:08 -04:00
Adam M Rivera
c233defbe6 Merge branch 'retro-loiter' of https://code.google.com/r/a432511-wip into auto-approach 
Conflicts:
	Tools/ArdupilotMegaPlanner/Common.cs
 2012-04-19 11:08:34 -05:00
Adam M Rivera
1676e09f12 navigation.pde: Put the new calc_GPS_velocity method in a compiler if that checks the new RETRO_LOITER_MODE config value (saves space and ensures its not being used unless retro loiter mode is enabled) 2012-04-19 10:21:04 -05:00
Adam M Rivera
24363ccb83 Merge branch 'master' of https://code.google.com/p/ardupilot-mega into retro-loiter 2012-04-19 10:17:36 -05:00
Adam M Rivera
d29f1ef331 Loiter: Made the "retro loiter" routines configurable. Add RETRO_LOITER_MODE ENABLED to APM_Config.h to enable the older loiter shtuff. 2012-04-19 10:16:29 -05:00
Adam M Rivera
a7bc3d2cc6 Arducopter.pde: Moved gps to 10hz. Changed calc_XY_velocity to calc_GPS_velocity. 2012-04-18 23:07:35 -05:00
Adam M Rivera
d4a4641ae6 navigation.pde: Added calc_GPS_velocity. Added constraint to x/y error and x/y rate error. 2012-04-18 23:06:15 -05:00
James Goppert
53c143a575 Improved cmake options. 2012-04-18 23:15:29 -04:00
James Goppert
0e7e77760a Updated ArduPlane/ArduCopter cmake options. 2012-04-18 15:16:02 -04:00
Adam M Rivera
a3842734a9 Planner/defines.h: Updated the enumeration value for APPROACH so as not to disturb the order of the universe. 2012-04-18 10:32:01 -05:00
James Goppert
a9f0bd24d7 Switched to project specific cmake lists. 
This is better since each project has very different options.
 2012-04-17 23:07:20 -04:00
Adam M Rivera
f6d81a16c2 ArduCopter: Added code to prevent mode from switching to APPROACH on every loiter. 2012-04-16 16:29:54 -05:00
Adam M Rivera
56a00fa1f7 ArduCopter: Changed millis compare to use new config value for approach delay. 2012-04-16 14:04:30 -05:00
Adam M Rivera
07e53fad18 commands_logic.pde: Added write to constrained value to EEPROM. 2012-04-16 14:03:33 -05:00
Adam M Rivera
7b277d7044 config.h: Added RTL_APPROACH_DELAY config value. 2012-04-16 14:00:08 -05:00
Adam M Rivera
f9affb3295 Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach 
Conflicts:
	ArduCopter/Parameters.h
 2012-04-16 10:23:01 -05:00
Adam M Rivera
0c3d6614cd system.pde: Updated param name to loiter_timer. 2012-04-16 10:12:30 -05:00
Adam M Rivera
3d024ba2dd commands_logic: Allowed for an approach alt as low as 1m. Added a check to make sure we are currently above our target approach alt. 2012-04-16 10:11:50 -05:00
Adam M Rivera
41702aca94 ArduCopter: Updated param name from auto_land_timer to loiter_timer, because it could really be used for more routines like auto-approach. Added timer before approach (20s). 2012-04-16 10:07:57 -05:00
Adam M Rivera
a366bb2f81 Parameters: Changed rtl_approach_alt to float to support more granular altitudes 2012-04-16 10:06:29 -05:00
rmackay9
870b5e5f75 ArduCopter - CH6 Tuning - added AHRS_YAW_KP parameter as 30. Now you can easily set the amount that the mag is used to correct the gyro based yaw estimate in the DCM 2012-04-16 23:47:57 +09:00
Andrew Tridgell
95cb35c7bb AHRS: enable AHRS_ group in ArduCopter 2012-04-16 20:55:14 +10:00
Adam M Rivera
77d6f22864 ArduCopter, commands_logic: Updated logic to allow as low as 5m. 2012-04-15 19:50:05 -05:00
Adam M Rivera
2954bf6f76 ArduCopter: Added check to make sure user defined approach alt is at least 5. 2012-04-15 16:58:22 -05:00
Adam M Rivera
cddcdb8be3 commands_logic: Added check to make sure the do_approach method is not being used to land. 2012-04-15 16:57:49 -05:00
Adam M Rivera
a2b338c052 System: Added handler for the new APPROACH flight mode which will initiate an approach to a target alt as defined by the user. 2012-04-15 16:55:34 -05:00
Adam M Rivera
a24b7bcf14 ArduCopter: Added check to g.rtl_approach_alt, which if greater than zero will initiate an approach to the target alt rather than land. 2012-04-15 16:54:43 -05:00
Adam M Rivera
cfe3b58248 commands_logic: Added do_approach() to set the new target alt based on the user defined value. 2012-04-15 16:53:25 -05:00
Adam M Rivera
83fe6733d4 Defines: Added new control mode (APPROACH). 2012-04-15 16:52:32 -05:00
Adam M Rivera
7ba8c291bd Parameters: Added new APPROACH_ALT params (g.rtl_approach_alt) which stored the users desired target altitude after RTL is complete. 2012-04-15 16:51:41 -05:00
rmackay9
a71ed6abec ArduCopter - updated firmware version to "2.6 Beta" 2012-04-14 14:26:44 +09:00
rmackay9
24b81db20e ArduCopter - LEDS - main code to support COPTER_LEDS. 
Code by Robert Lefebvre
 2012-04-12 22:55:44 +09:00
rmackay9
c337df11c8 ArduCopter - LEDS - set new output pins to OUTPUT to support COPTER_LEDS. 
Code by Robert Lefebvre
 2012-04-12 22:55:40 +09:00
rmackay9
d70f5da5e0 ArduCopter - LEDS - define pins to be used for COPTER_LEDS. 
Code by Robert Lefebvre
 2012-04-12 22:55:36 +09:00
rmackay9
84b07b5e6a ArduCopter - LEDS - added new COPTER_LEDS definition 
Code by Robert Lefebvre
 2012-04-12 22:55:32 +09:00
rmackay9
0a3bc9a66a ArduCopter - LEDS - two new parameters to support COPTER_LEDS. 
Code by Robert Lefebvre.
 2012-04-12 22:55:28 +09:00
rmackay9
fad162989f ArduCopter - navigation.pde - added logging of Loiter PID controllers 2012-04-11 23:52:25 +09:00
rmackay9
f8210b164c ArduCopter - Parameters.h - changed initialisation order to remove compiler warning (have not changed enum values so shouldn't require eeprom format id update) 2012-04-09 17:37:06 +09:00
rmackay9
df85051574 ArduCopter - added dataflash logging of roll and pitch rate controllers 2012-04-08 10:19:20 +09:00
rmackay9
998058ec07 ArduCopter - removed unused motor pde files including heli.pde, motors_hexa.pde, motors_octa.pde, motors_octa_quad.pde, motors_tri.pde and motors_y6.pde 2012-04-04 23:06:12 +09:00
rmackay9
ad9a8acbab ArduCopter - test.pde - changed references "motor_armed" to "motors.armed()" as part of move to AP_Motors library. 
Change to ESC initialisation calls to use motors.throttle_pass_through method of AP_Motors class.
 2012-04-04 23:05:26 +09:00
rmackay9
1d086c83f0 ArduCopter - system.pde - changed references to "motor_armed" to "motors.armed()" as part of the move to use AP_Motors library. 2012-04-04 23:03:21 +09:00
rmackay9
4aa40bdf10 ArduCopter - setup.pde - changed cli for helicopter to call the new AP_Motors class's parameters instead of the global parameters. 
changed init_esc to call the AP_Motor's class's "throttle_pass_through" function.
 2012-04-04 23:02:29 +09:00
rmackay9
473126581d ArduCopter - radio.pde - changed motor initialisation to set update rate, frame orientation, min and max throttle to AP_Motors class. 
Note: perhaps the motors speed at least should be moved to a parameter within the motors class.
output_min function greatly simplified as this is handled by the AP_Motors class.
 2012-04-04 23:00:56 +09:00
rmackay9
905a445391 ArduCopter - motors.pde - changed references to "motor_armed" to "motors.armed()" because we've moved to using the AP_Motors class. 
Simplified set_servos_4 function which was responsible for calling "output_motors_armed" or "output_motors_disarmed" as this determination as to whether the motors are armed or not is handled within the AP_Motors class.
 2012-04-04 22:58:42 +09:00
rmackay9
aa54458dcf ArduCopter - leds.pde - changed refrences to "motor_armed" to "motors.armed()" 2012-04-04 22:57:50 +09:00
rmackay9
7df17e9b3b ArduCopter - removed references to MOT_1 etc as these are now within the AP_Motors class (i.e. MOT_1 has become AP_MOTORS_MOT_1) 2012-04-04 22:56:07 +09:00
rmackay9
ee308ea06c ArduCopter - increased firmware version to 118. Removed nearly all heli parameters as these are all created by the AP_MotorHeli class now. 
Note: we cannot move the heli_servos to the AP_MotorHeli class yet because of a small issue in the parameters class.
 2012-04-04 22:55:07 +09:00
rmackay9
8402a3d837 ArduCopter - Log.pde - changed MOT output to dataflash to take values from AP_Motors class's motor_out array instead of the global motor_out array. 2012-04-04 22:53:21 +09:00
rmackay9
e5710958bc ArduCopter - GCS_Mavlink.pde - changed output to ground station to use new AP_Motor's class motors array inplace of the global "motor_out" array. 2012-04-04 22:52:26 +09:00
rmackay9
aa4085183c ArduCopter - Attitude.pde - moved heli_get_angle_boost from heli.pde (which will be removed) to Attitude.pde. In fact we should combine heli_get_angle_boost and the regular get_angle_boost. 2012-04-04 22:51:39 +09:00
rmackay9
54a0709759 ArduCopter - add includes for new AP_Motors classes. 
Remove global motor_filtered and motor_out arrays.
Removed all global heli variables.
replace "motor_armed" with "motors.armed()"
removed output to rc_4 for tri because this is now handled by AP_MotorsTri class
 2012-04-04 22:50:43 +09:00
Andrew Tridgell
c0a54762c6 MAVLink: port the new adaptive flow control to ArduCopter 
This allows for arbitrary stream rates, and supports flow control if
you are using a 3DR radio
 2012-04-02 11:18:53 +10:00
rmackay9
75d7308fb4 ArduCopter - CH6 tuning - changed Roll/Pitch Rate D tuning to use the user supplied tuning range instead of the range / 100. 
also changed heli_ext_gyro_gain to make it use the tuning range directly.
 2012-03-31 09:28:25 +09:00
Andrew Tridgell
e0bb7e2777 MAVLink: don't waste 100 bytes of bandwidth sending 1 byte of information 
the GPS_STATUS message is a massive waste of bandwidth, but it is the
only message that tells us the number of visible satellites. So only
send it if that information changes.

This makes MAVLink work better at low baud rates
 2012-03-30 17:46:20 +11:00
Andrew Tridgell
7634f541b9 ACM: use set_blocking_writes(false) when we arm motors 2012-03-30 17:46:20 +11:00
Andrew Tridgell
b4107d35e8 MAVLink: raise the serial transmit buffer size to 256 bytes 
the 128 byte serial transmit buffer was causing significant problems
with queueing of mavlink messages. With 256 bytes we can fit a lot
more messages out in each pass of the code, which makes telemetry more
efficient

As we discussed on the dev call, we now have enough free ram for this
to be worthwhile
 2012-03-30 17:46:20 +11:00
Andrew Tridgell
0bc604f030 ACM: removed FORCE_AUTOMATIC_DECLINATION_UPDATE 
we now have the EEPROM option COMPASS_AUTODEC instead
 2012-03-30 14:25:27 +11:00
Adam M Rivera
51b70e4d36 ArduCopter: Changed implementation of configuration value for automatic declination. There is now a FORCE_AUTOMATIC_DECLINATION_UPDATE that when enabled will update the declination on every GPS 3D fix regardless of whether or not the user saved a value to the EEPROM. By default the declination will only be set by the automatic declination routine if the user has not saved a declination to the EEPROM. 2012-03-30 14:25:06 +11:00
rmackay9
0efb0e5b4d ArduCopter - added CH6_STABILIZE_KD tuning value 2012-03-29 21:09:41 +09:00
rmackay9
599cea21bb Added multiple new tuning parameters to the inflight channel 6 tuning feature: 
#define CH6_YAW_KI 24
        #define CH6_ACRO_KP 25
        #define CH6_YAW_RATE_KD 26
        #define CH6_LOITER_KI 27
        #define CH6_LOITER_RATE_KI 28
 2012-03-28 23:58:58 +09:00
Andrew Tridgell
34506b170f Mavlink: fixed warnings about limits on int32 values 2012-03-27 15:37:25 +11:00
Andrew Tridgell
e0c9ab5a29 ACM: fixed heli build 2012-03-27 15:37:25 +11:00
Andrew Tridgell
47f9dfd125 ACM: fixed the build on the 1280 2012-03-27 15:37:24 +11:00
Andrew Tridgell
e956e21e7d ACM: enable the new compass offset nulling in ACM 2012-03-27 15:37:24 +11:00
rmackay9
1f4cfb9333 ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers. 2012-03-25 16:09:08 +09:00
rmackay9
67cf7b9eed ArduCopter - updated firmware version to 2.5.3 2012-03-25 09:13:51 +09:00
rmackay9
63b96c0153 ArduCopter - altitude hold - ensure throttle_avg is initialised from g.throttle_cruise parameter 2012-03-23 23:48:24 +09:00
rmackay9
89576a281a ArduCopter - updated to firmware version to 2.5.2 to avoid confusion with post 2.5.1 versions posted to downloads area 2012-03-23 23:12:49 +09:00
Robert Lefebvre
84d8414a2e Fix Auto_Trim to allow it to actually be called when setup on Ch7 pulldown menu in MP. 2012-03-23 09:17:58 -04:00
Jason Short
e2560c5865 Throttle_hold was in APM_Config - which is ignored by the Mission planner Hex generator 2012-03-22 10:01:24 -07:00
rmackay9
ad4a2aa9f3 ArduCopter - motors_quad.pde - corrected test sequence for + configuration 2012-03-21 22:04:50 +09:00
rmackay9
66c4f752e3 ArduCopter - navigation - corrected comment in check_missed_wp function to clarify that you've passed the waypoint when the direction to the way point is more than 100 degrees off (not 10 degrees off) from your original bearing towards the waypoint 2012-03-20 17:11:22 +09:00
rmackay9
1dd554c333 ArduCopter - updated version to 2.5.1 2012-03-20 17:08:18 +09:00
rmackay9
0773a25b5d ArduCopter - increased default THROTTLE_CRUISE to 450 2012-03-20 16:34:07 +09:00
rmackay9
22315cd41a ArduCopter - Navigation.pde - corrected comment re wp_distance and get_distance to clarify that they are in cm (not meters!) 2012-03-20 16:13:38 +09:00
Andrew Tridgell
458d55e5bc MAVLink: constrain variable changes to the datatype range 
if someone tries to set a AP_Int16 to a value of 300000, they now get
32767 instead of -27678
 2012-03-19 17:29:02 +11:00
Andrew Tridgell
547b4ed55b AHRS: adapt ArduCopter for new AHRS framework 2012-03-19 17:29:02 +11:00
Jason Short
c5344a2a85 ACM: Arducopter.pde - Added a constraint to the NO_NAV mode to be similar to the Loiter and rate nav modes. 2012-03-18 22:31:22 -07:00
Jason Short
a0717f082e ACM: Attitude.pde - consolidated wind I term resets 2012-03-18 22:31:21 -07:00
Jason Short
fe7ca98701 ACM: system.pde - removed reset_nav_I() to consolidate the wind control reset. 2012-03-18 22:31:21 -07:00
rmackay9
9841cb0335 ArduCopter - small change to ensure both roll and pitch commands are zero before switching out of loiter_override (loiter override becomes true when roll+pitch command is greater than 5 degrees and switches back to false when both become zero) 
- remove incorrect comments about when loiter target position is reset.
 2012-03-18 15:16:04 +09:00
rmackay9
dc92da818c ArduCopter - remove reference to AUTO_RESET_LOITER that is not used anymore 2012-03-18 14:53:19 +09:00
rmackay9
91b2b48fd8 ArduCopter - bug fix to calc_XY_velocity (was using uninitialised last_longitutde and last_latitude for speed calculations) 2012-03-18 12:11:12 +09:00
Jason Short
491af02d8a ACM: Lowered gains from flight tests today with 3DR Quad 2012-03-17 11:04:01 -07:00
Jason Short
427dacba70 ACM: Smoother Speed calcs 2012-03-16 14:10:19 -07:00
Jason Short
3038da1dc3 ACM: Softer Loiter Gains 2012-03-16 14:10:19 -07:00
Jason Short
48a0c9a818 ACM: Small fix to nav_throttle to prevent too fast of a landing. 2012-03-16 14:10:19 -07:00
Jason Short
6201bdb8a7 ACM: Fixed comment 2012-03-16 14:10:19 -07:00
Jason Short
1c0b28c956 Fixed Scaling bug in Sonar mixing 2012-03-16 14:10:19 -07:00
Jason Short
7153b94ade ACM: Disabled D term experiment for Loiter until more testing 2012-03-15 19:20:03 -07:00
Jason Short
a52a14bf12 Tune down Loiter_P a hair 2012-03-15 19:17:27 -07:00
Robert Lefebvre
be3fe36c52 Small fix on the Traditional Helicopter Collective-Yaw compensation calculation. 2012-03-15 20:14:18 -04:00
rmackay9
68e37774a6 ArduCopter - removed #define AUTOMATIC_DECLINATION ENABLED line to ensure users don't try and enable it because it needs a bit more work before it's ready for general use 2012-03-15 21:58:42 +09:00
analoguedevices
86eff20d5d Rev'ed version number to 2.5. Added more credits 2012-03-15 02:38:54 +00:00
Jason Short
6f8b97bf6a ACM: Added constraints for invalid climb rates. Robert Lefebvre had a bad sonar and very invalid rates crept into the system. 2012-03-13 21:31:16 -07:00
Jason Short
4315c06f34 Lowering the D filter for less latency and less oscillation. 2012-03-13 12:58:46 -07:00
Jason Short
48ba24a810 ACM: Loiter tuning updates, turned up I a bit, a higher I will work better if the system is well tuned. 2012-03-13 10:23:31 -07:00
Jason Short
468d9c4b4f ACM: Loiter D performance updates 2012-03-13 10:23:31 -07:00
Jason Short
7953808d14 ACM: Larger filter for Loiter D 2012-03-13 10:23:30 -07:00
Jason Short
7034b709d1 ACM: removing old define 2012-03-12 13:11:30 -07:00
Jason Short
73e2bd6cd8 ACM: Got the sign wrong. I'm using the derivative of the error now and not the sensor, so the sign was reversed. 2012-03-12 13:11:05 -07:00
Jason Short
0b51d9b8b0 ACM: Made Loiter_D 0 by default. Accidentally left it on by default. 2012-03-12 10:37:15 -07:00
Jason Short
deed802d1a ACM: Broke out the D term for the PID loop to add custom filtering. The current AC_PID filtering wasn't working for this application and we needed more smoothing. Bad pitch oscillations were being transmitted to the copter. 2012-03-11 23:21:49 -07:00
Jason Short
b3795f1c00 ACM: removed Filtering code for motors in Quad for testing 2012-03-11 23:21:49 -07:00
Jason Short
a989b88680 ACM: made same as Loiter I 2012-03-11 23:21:49 -07:00
Jason Short
0d434ca92c ACM: Tuning based on flights today 2012-03-11 23:21:49 -07:00
Jason Short
0ab6b6e592 ACM: Rate_d filter for PID loop of Loiter. 2012-03-11 23:21:49 -07:00
Jason Short
77fe7de55d ACM: The I term in update_nav_wp with the no_nav condition was pulling from the wrong PID loop and was essentially 0 all the time. 2012-03-11 23:21:49 -07:00
rmackay9
a869a01294 ArduCopter - Log.pde - added wrap_360 to compass heading field of ATT message to resolve overflow problem that caused heading to appear as being off by 70 degrees 2012-03-12 12:09:04 +09:00
Andrew Tridgell
2a03a0584f AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED 
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
 2012-03-11 21:46:41 +11:00
Adam M Rivera
d3667faef4 AP_Declination: Added call to compass.set_initial_location if the compass is enabled when the 3D fix is obtained. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Adam M Rivera
2524f9c8df AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Jason Short
62c2aa4924 ACM: Added Loiter D tuning 2012-03-10 14:17:57 -08:00
Jason Short
cb8729109c ACM: Added Loiter_D for tuning as #23 2012-03-10 14:17:16 -08:00
Jason Short
0671bb9168 ACM: Firmware rev 2012-03-10 12:45:03 -08:00
Jason Short
f9d0dc9daa ACM: disabled auto_calibration until more testing can be done 2012-03-10 12:44:49 -08:00
Jason Short
5ad7320505 ACM: changed alt hold initialization of altitude to be immediate 2012-03-10 12:44:18 -08:00
Jason Short
450f89ec5d ACM: Added note about scaling rates 2012-03-10 12:43:28 -08:00
Jason Short
eb53200179 ACM: Altered the scaling speed for altitude changes for faster rises. 2012-03-10 12:43:01 -08:00
Jason Short
204f9957b0 ACM: Added force_new_altitude call to do immediate changes in altitude and no gradual changes. 2012-03-10 12:42:22 -08:00
Jason Short
83729d0f75 ACM: decreased rate P for alt hold to remove bumpy repsonse 2012-03-10 12:41:06 -08:00
Jason Short
220d5a1c6e ACM: Increased the altitude error P for smoother alt hold response 2012-03-10 12:40:44 -08:00
Jason Short
4b703e8842 decreased the loiter rate P for overshoot 2012-03-10 12:40:07 -08:00
Jason Short
fc32da0d2e ACM: increased the available rate error constrain, it was too low 2012-03-10 12:39:16 -08:00
Jason Short
bd4835a1b2 ACM: removed the experiment for rate error. 2012-03-10 12:38:29 -08:00
Jason Short
29d6085bab added Force_new_altitude call for alt hold 2012-03-10 12:37:54 -08:00
Jason Short
4ba600c0c5 upped throttle manual boost to 225 2012-03-10 12:37:28 -08:00
rmackay9
afc4aceb32 ArduCopter - fixed small compile warning about unused x_iterm and y_iterm in navigation.pde 2012-03-11 01:27:58 +09:00
rmackay9
c7480f2281 ArduCopter - fix to dataflash logging of Mag heading 2012-03-11 01:27:29 +09:00
Andrew Tridgell
d75e883fe8 GCS: get_integrator() is now get_gyro_drift() in DCM 2012-03-10 10:34:33 +11:00
Andrew Tridgell
9a06d35772 make 'ENABLE' and 'ENABLED' mean the same things 
users get this wrong far too often!
 2012-03-10 10:34:33 +11:00
Andrew Tridgell
828ad7625b ACM: removed the ADC filtering code 2012-03-10 10:34:32 +11:00
Andrew Tridgell
1016d3c95d ACM: removed quaternion special cases in CLI code 2012-03-10 10:34:31 +11:00
Andrew Tridgell
8393c0299b ACM: removed the DCM tuning overrides 
not needed now that DCM scales with deltat
 2012-03-10 10:34:31 +11:00
Andrew Tridgell
7291dfc25a ACM: removed the special case for quaternions in GCS code 2012-03-10 10:34:31 +11:00
Andrew Tridgell
d6cfc51ae4 ACM: no need to fetch offsets at startup 
AP_Param handles this
 2012-03-10 10:34:31 +11:00
Andrew Tridgell
ef771fecdc ACM: removed a lot of the special case code for quaternions 2012-03-10 10:34:31 +11:00
Andrew Tridgell
69c29d35ce ACM: change DCM loop to 100Hz 
On my APM2 quad this seems to give better results
 2012-03-10 10:34:31 +11:00
Andrew Tridgell
2596acc8eb ACM: removed incorrect mode definition 2012-03-10 10:34:30 +11:00
Andrew Tridgell
7a9b3d3388 Quaternion: show "Quaternion test" on startup if enabled 2012-03-10 10:34:29 +11:00
Andrew Tridgell
7e4c8592ff ACM: make it possible to build ArduCopter with quaternions 2012-03-10 10:34:29 +11:00
Andrew Tridgell
9bff4e2c4c ACM: only call the fast loop if the imu has new data 
this prevents us spinning waiting for the sensors to gather some data
 2012-03-10 10:34:29 +11:00
Andrew Tridgell
367947fd33 HWSTATUS: if we don't know the voltage, report it as zero 
this will tell us if board_voltage() is really working
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
64cc04ae09 ACM: adjust yaw drift correction constants 
this should give the compass a bit more authority
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
a0ce202d87 ACM: added SIMSTATE, DCM and HWSTATUS messages to ACM 2012-03-10 10:34:27 +11:00
Jason Short
486c56ce41 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00
Jason Short
c8e9d57567 temp remove filter for quad motors during testing. It's unlikely this filter did anything at all to be honest. 2012-03-06 22:23:06 -08:00
Jason Short
730476fdfd ACM - 
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
 2012-03-06 22:22:14 -08:00
Jason Short
c26eb6afcc ACM: Updated config values 2012-03-06 22:12:24 -08:00
rmackay9
8b256cf924 ArduCopter - fix for stability patch and motor filter meant to deal with engines tendency to speed up faster than they slow down 2012-03-06 23:20:30 +09:00
rmackay9
72a775cc2a ArduCopter - fixed typo in motor filtering for octa, octa_quad and y6 that is suppose to correct for props speeding up faster than they slow down. 2012-03-06 22:19:19 +09:00
rmackay9
706bea5992 ArduCopter - added OCTA_QUAD_FRAME to comments in APM_Configh.h to help user select frame when compiling with arduino 2012-03-06 22:15:02 +09:00
Jason Short
46d7da4d14 Added define for throttle range for altitude changes, updated it to 250 2012-03-05 22:12:53 -08:00
Robert Lefebvre
a480b32400 Added support for TradHeli H1 swashplate type. Added new param heli_h1_swash_enabled. 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-03-03 08:14:14 -05:00
Andrew Tridgell
0ff44563ec ACM: use g.rc_speed for all APM_RC.SetFastOutputChannels calls 2012-03-02 17:57:08 +11:00
Andrew Tridgell
0fc646d666 ACM: set default RC fast speed to 400Hz 2012-03-02 17:57:08 +11:00
Andrew Tridgell
e213f6780e ACM: added RC_SPEED MAVLink parameter 
this will set the speed for APM_RC.SetFastOutputChannels()
 2012-03-02 17:57:08 +11:00
Andrew Tridgell
f781bd735b ACM: fixed Parameters.h to avoid duplicate keys 
unfortunately everyone needs to reload
 2012-03-02 15:48:28 +11:00
Andrew Tridgell
cb874d6097 ACM: added board_voltage() 2012-03-02 15:48:28 +11:00
Robert Lefebvre
e49c2d2871 Rescale TradHeli roll_out and pitch_out into the min and max ranges to provide linear motion across the input range instead of stopping when the input hits the constrain value. These calculations are based on an assumption of the user specified roll_max and pitch_max coming into this equation at 4500 or less, and based on the original assumption of the total g.heli_servo_x.servo_out range being -4500 to 4500. 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-03-01 22:04:50 -05:00
Jason Short
7c09e4a5e6 added stab_d gain scheduling - off by default 2012-02-28 20:16:40 -08:00
Jason Short
a387956814 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short
ceef8070ac added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short
b76c4ecb22 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short
efdf6ee79f added option for stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short
ca34d7b7c2 Added test for stab_d gain scheduling. 2012-02-28 20:16:40 -08:00
Pat Hickey
16ed16f403 Cleanup: rm ArduCopter/GCS_Mavlink\ copy.txt 
* Not needed, but we can always checkout an old version if it is.

Hi Pat,
This may have been my WIP for the Mavlink 1.0 conversion. I tried to
give Tridge a head start on it. I've made small updates to it in
parallel to the current Mavlink. You can delete it as he would have used
it by now if he felt it was helpful.

Jason

On Feb 28, 2012, at 4:08 PM, Pat Hickey wrote:

It looks like this file was checked in by accident, possibly, but you've
made a few small changes to it since creating it.

Is it important? Should we get rid of it?

Git log of file below.

Thanks
Pat
...
 2012-02-28 16:28:27 -08:00
Pat Hickey
ff0fc26484 Cleanup: rename files with spaces in their names, replace with underscores 
* Skipped /Tools/ArdupilotMegaPlanner/Resources/new...
  and /archive/Configurator/Source/Utilities/TDMS/G...
  because I don't want to mess with that.
 2012-02-28 16:14:31 -08:00
Robert Lefebvre
76c3cd88f0 Added heli_collectiveFactor array 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-02-28 10:49:28 -05:00
rmackay9
744e5b8c60 ArduCopter - made rate controller filters globals to fix compiler error on Arduino 022 (Arduino 1.0 was fine) 2012-02-28 22:56:26 +09:00
rmackay9
4a0989f95d ArduCopter - Attitude.pde - updated get_rate_roll and get_rate_pitch to use new average filter. 
modified all int to int16_t in Attitude.pde
 2012-02-28 21:26:37 +09:00
rmackay9
17d94b61ed ArduCopter - modified to work with new Filter library 2012-02-28 21:02:44 +09:00
Jason Short
ba68d6d8a1 Set loiter rate enabled by default 2012-02-26 12:29:28 -08:00
Jason Short
e06d8142c1 Added OPtion for non-rate based loiter 2012-02-26 11:33:37 -08:00
Jason Short
6e53949c2a removed Constraint that caused JLN's horizontal drift. 2012-02-26 11:33:37 -08:00
Jason Short
517172ba20 Added Loiter Rate Tuning 2012-02-26 11:33:37 -08:00
Jason Short
0ce0c7c262 Added Loiter_rate_tuning 2012-02-26 11:33:36 -08:00
Jason Short
eac77504a3 Added more Logging for PIDs. 2012-02-26 11:33:36 -08:00
rmackay9
8193c786ef ArduCopter - added #include <Filter.h> to unbreak the build! 2012-02-26 17:05:41 +09:00
rmackay9
69132e0fe7 ArduCopter - change sonar to use new mode filter from Filter library 2012-02-26 15:35:14 +09:00
Jason Short
f27e9f9ca1 added a simple rest of nav_throttle just in case 2012-02-25 13:31:21 -08:00
Jason Short
cc5ab4aebf increased speed of alt hold I term based on Jani's Logs 2012-02-25 13:31:21 -08:00
Jason Short
1ce267f904 increased the rate error for more responsive alt hold 2012-02-25 13:31:21 -08:00
Jason Short
a924c3685e Based on Jani's latest logs I've made two tweaks to alt hold. 
The first is to remove the filter on the throttle output for alt_hold.

The second was to open up the constraint on climb rate. This is to deal with larger than expected disturbances causing altitude changes.
 2012-02-25 13:31:21 -08:00
Andrew Tridgell
e2bbc795ad ACM: use a NULL gps pointer in DCM init 
current DCM API does need a GPS reference passed in, but it can be
NULL
 2012-02-25 15:08:49 +11:00
Andrew Tridgell
0248b48d30 allow MAG_ENABLE to be changed in flight 
this disables the compass in DCM if MAG_ENABLE is changed in
flight. Without this we would use a fixed yaw once the compass is
disabled

This also makes sure we don't pass the compass to DCM till we have
done a read. This ensures we have a good compass fix for the initial
DCM heading
 2012-02-25 14:51:09 +11:00
Andrew Tridgell
864ed1a87f ACM: check the return of compass.init() 
if the compass fails to initialise then don't pass it to DCM, or we
will get no yaw control. Report the init failure to the user.
 2012-02-25 14:51:08 +11:00
Andrew Tridgell
698749dd92 ACM: don't pass a gps pointer to DCM 
after discussion with Randy, we don't want ArduCopter to fall back to
GPS for yaw when the compass becomes unhealthy. So we shouldn't pass
the gps object to the DCM code at all.
 2012-02-25 14:51:08 +11:00
Andrew Tridgell
690dc9052a GCS: force scalar type in copy_name() 
this enables access to compass offsets over MAVLink
 2012-02-25 11:37:20 +11:00
Andrew Tridgell
2e9105c68a AP_Param: added special handling for Vector3f 
We would like to be able to use Vector3f as a parameter while exposing
the individual elements of the vector as MAVLink parameters. This
change to AP_Param makes that possible, by giving AP_Vector3f a dual
personality
 2012-02-25 11:37:20 +11:00
Jason Short
1e254cbca0 Compass heading added to ATT log 2012-02-24 12:11:15 -08:00
rmackay9
57e5eee8c8 TradHeli - increase max yaw input to 45 degrees 2012-02-24 20:18:40 +09:00
Jason Short
385828824d updated Gains for Marco's loiter test 2012-02-23 22:03:26 -08:00
Jason Short
24345d4f43 Loiter updates 2012-02-23 22:03:26 -08:00
Andrew Tridgell
1cd3172954 ACM: ensure update_trig() doesn't cause NAN values for cos_roll/cos_pitch 
the DCM matrix could have a value over 1.0 for c.x due to rounding
errors
 2012-02-24 11:52:55 +11:00
Jason Short
364afe8da0 added a constraint to D term 2012-02-23 09:14:44 -08:00
Andrew Tridgell
95ef9206dc DCM: renorm_sqrt_count is now called renorm_range_count 2012-02-23 08:16:08 +11:00
Jason Short
c7c16a5b0f Emile's Fixes 2012-02-22 10:27:34 -08:00
Jason Short
4483f19f85 Marco's Hexa Motors 2012-02-22 09:55:44 -08:00
Jason Short
242f54793c revved a version 2012-02-22 09:00:42 -08:00
Jason Short
729c824809 made timer unsigned 2012-02-21 21:49:03 -08:00
Jason Short
42b5d47f7b commented out control mode debug print 2012-02-21 21:48:07 -08:00
Jason Short
30efbae0e9 removed old comments 2012-02-19 14:21:27 -08:00
Jason Short
265c5255a3 Added slow_wp default in AP mode 2012-02-19 13:15:40 -08:00
Jason Short
336441b109 reset slow_WP option at mode switch 2012-02-19 13:13:42 -08:00
Jason Short
81a861c8ac Added slow wp option in calc_desired_speed 2012-02-19 13:13:21 -08:00
Jason Short
33d4d52a6b set Slow WP option for RTL in Auto mode 2012-02-19 13:12:23 -08:00
Jason Short
cae49b3543 Added "slow WP" option for RTL. 2012-02-19 13:11:59 -08:00
Jason Short
b54d08f410 Updated manual throttle control during throttle hold 2012-02-19 12:40:51 -08:00
Jason Short
bcd5129f9b added workaround for resetting alt. 2012-02-19 12:40:08 -08:00
Jason Short
fa32b084bd Added SW test for Manual Boost 2012-02-19 12:39:40 -08:00
Randy Mackay
9fabdb5797 TradHeli - change throttle range back to 0~1000 (was temporarily changed to be 1250~850 which limited the range of the swash plate's vertical movements) 2012-02-20 00:27:12 +09:00
Randy Mackay
e146f225b1 ArduCopter - remove unnecessary block for next GPS value before saving home location 2012-02-19 15:38:40 +09:00
Andrew Tridgell
df8a557630 AP_Param: update users of AP_Param for ParamToken 2012-02-19 17:05:28 +11:00
Andrew Tridgell
12327eb2a9 Heli: fixed some 'used before initialised' warnings 2012-02-19 16:34:43 +11:00
Jason Short
028de5d2c5 Axis lock beta (off by default) 2012-02-18 21:16:19 -08:00
Jason Short
885710fce6 updated max throttle define 2012-02-18 21:14:13 -08:00
Jason Short
05024cc06c Change 800 to a define 2012-02-18 21:13:28 -08:00
Jason Short
04b70ffdc2 added Axis_Lock params 2012-02-18 21:13:06 -08:00
Jason Short
ff2b4ecb7a updated throttle range 2012-02-18 21:11:06 -08:00
Jason Short
1e37a0ec17 added a limit to range output 2012-02-18 21:08:17 -08:00
Jason Short
1b46daa12e some better defaults for JDrones 2012-02-18 14:23:21 -08:00
Randy Mackay
b92d7aaad5 ArduCopter - fix for yaw control on Octa Quad Plus frame. 2012-02-18 22:04:09 +09:00
Randy Mackay
232359186e TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde. 
also renamed heli parameters from _coll_ to the more descriptive _collective_
 2012-02-18 20:57:51 +09:00
Randy Mackay
b64c0da003 ArduCopter - updated version to 2.4 2012-02-18 18:44:29 +09:00
Andrew Tridgell
6929226b96 ACM: expanded EEPROM parameter area by 256 bytes 2012-02-18 10:51:57 +11:00
Andrew Tridgell
718a5b70e3 AP_Param: fixed saving of sensor calibration 
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
 2012-02-18 10:51:57 +11:00
Jason Short
b532cb91b1 added Rate_D tuning value 2012-02-17 15:23:59 -08:00
Jason Short
0075901f77 upped rate loop to 250hz 2012-02-17 15:23:59 -08:00
Jason Short
5218220f0f re-implemented WII Dampening filter for Marco. 2012-02-16 22:38:23 -08:00
Jason Short
b052dab80d Adjusted gains to move closer to Marco's tests 2012-02-16 22:19:39 -08:00
Jason Short
17c6c7b294 added extra gain logging 2012-02-16 22:09:22 -08:00
Jason Short
908ca4e915 scaled X velocity 2012-02-16 22:09:22 -08:00
Jason Short
bc1593e89c cast to float 2012-02-16 22:09:21 -08:00
Jason Short
632cc783a1 cast D term to float just in case 2012-02-16 22:09:21 -08:00
Jason Short
36a120d8df removed some unused vars, 
formatting, made loop speed same as PIDT1 to eliminate variable.
 2012-02-16 22:09:21 -08:00
Jason Short
a43ee36bee CH 6 Range setup 2012-02-15 11:47:54 -08:00
Jason Short
3d63bb6cd4 Added acro_p to the params 2012-02-15 11:29:25 -08:00
Jason Short
e8b6f5ecee allow auto-land if failsafe is triggered 2012-02-15 10:53:54 -08:00
Jason Short
fabeccad4a Marco's updated Motor testing code 2012-02-15 10:49:35 -08:00
Jason Short
73591a0ca5 Added lengthy note about motor testing 2012-02-15 10:49:11 -08:00
Jason Short
9a3e862b55 added option in code for Loiter specific gains 2012-02-15 09:10:15 -08:00
Jason Short
e249c8466d AP slew rate 2012-02-15 09:10:15 -08:00
Jason Short
21856e7696 new defaults for params 2012-02-15 09:10:15 -08:00
Jason Short
fcb24ee17d Added Acro_P 2012-02-15 09:10:14 -08:00
Jason Short
574b86b02e synced params 2012-02-15 09:10:14 -08:00
Jason Short
91edeeeef2 added RTL_land_enabled 
added auto_pilot slew rate
 2012-02-15 09:10:14 -08:00
Jason Short
aa0662008b Added new params for CH6 Tuning 
moved enums to give more room for additional PIDs for Loiter
added new Acro_P gain
added auto_land_enabled option
added pi_loiter_lon and pi_loiter_lat for separate tuning of loiter
 2012-02-15 09:10:14 -08:00
Jason Short
05abe44f32 Added range setting via a parameter for CH6 tuning 2012-02-15 09:10:14 -08:00
Jason Short
c9b432955d removed unused Vars 2012-02-13 15:25:23 -08:00
Jason Short
4faba2048c Lowered for Jani 2012-02-13 15:25:23 -08:00
Andrew Tridgell
ecdbfd257a token is 16 bits now 2012-02-13 16:22:53 +11:00
Andrew Tridgell
d55a0c3a71 added AP_Param::show_all() 
this moves the logic into common code
 2012-02-13 16:22:52 +11:00
Andrew Tridgell
0f9adbdae0 token size for first()/next() is now 16 bits 2012-02-13 16:22:52 +11:00
Andrew Tridgell
617082769a go back to 1024 bytes for variables in EEPROM 2012-02-13 16:22:52 +11:00
Andrew Tridgell
0b3e3ec5c8 added group indexes to GCS_MAVLINK class 2012-02-13 16:22:52 +11:00
Andrew Tridgell
d4305e0ae2 fixed apm2beta build with AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell
16417b651e the ACM parameters have a max size of 1114 bytes 
to ensure that all parameters can be saved, expand parameter area by
256 bytes
 2012-02-13 16:22:52 +11:00
Andrew Tridgell
3b4cae3cc3 adapted main ACM code for AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell
c9c422539e update ACM MAVLink code for AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell
a2d0900460 fixed warning in Log build 2012-02-13 16:22:52 +11:00
Andrew Tridgell
bf1eb670e3 update main parameter code for AP_Param in ACM 2012-02-13 16:22:52 +11:00
Andrew Tridgell
f1a41b041f log: fixed some integer size errors 
need to be careful with the types passed to printf()
 2012-02-12 20:38:37 +11:00
Pat Hickey
306a3bb4f9 Makefile: extra convenience target for apm2hexa 2012-02-11 16:05:51 -08:00
Pat Hickey
84dd0d2fda ArduCopter Hexa output_motor_test: individually select all 6 motors 
* each of the 6 hexacopter motors can be selected individually
  by moving the joystick to extremes.

* previously, this was built from the quadcopter output_motor_test
  and some motors (left/right motors on +, front/back motors on X)
  were only selectable as pairs.
 2012-02-11 16:05:51 -08:00
Pat Hickey
739317276d ArduCopter setup motors: print basic instructions. 2012-02-11 16:05:51 -08:00
Pat Hickey
6573cec611 ArduCopter APM_Config.h: add sample custom channel config 
* uses new config variables introduced in 8a19543fd1e09621ba
 2012-02-11 16:05:51 -08:00
Pat Hickey
470fd8788e ArduCopter Channel Config: config vars for user override of MOT_n mapping 
* config variable CONFIG_CHANNELS has possible values
  CHANNEL_CONFIG_DEFAULT or CHANNEL_CONFIG_CUSTOM
* config_channels.h only provides APM1/APM2 mapping when
  CONFIG_CHANNELS == CHANNEL_CONFIG_DEFAULT
 2012-02-11 16:05:51 -08:00
Jason Short
2c65fc9ddf Cosmetic tweaks for tuning 2012-02-11 15:29:11 -08:00
Jason Short
0a63f104ab Gain adjustments for 3d frame. 2012-02-11 15:29:11 -08:00
Jason Short
969ac70000 reset All for Auto takeoff 2012-02-10 22:54:29 -08:00
Jason Short
b1d52da431 reset Rate_I for takeoff 2012-02-10 22:50:56 -08:00
Jason Short
efce991bfb upped max target speed to center of loiter 2012-02-10 22:46:27 -08:00
Jason Short
8ae53bffd2 Made Yaw Hold universal for Acro 2012-02-10 22:32:55 -08:00
Jason Short
dc15fe4c5d Moved to Rate_I by default for Jani to test 2012-02-10 22:32:55 -08:00
Jason Short
c64d781dce get_acro_yaw added 2012-02-10 22:32:55 -08:00
Jason Short
19ab0f481e made Yaw work like Roll and Pitch 2012-02-10 22:32:55 -08:00
Jason Short
9f8d7d5076 Minimize the Yaw Deadzone 2012-02-10 22:32:55 -08:00
Jason Short
50aaa09348 Up Nav_Rate_P 2012-02-09 22:38:36 -08:00
Jason Short
62627e9b57 reverted to Save_WP now that CH7 triggering is fixed 2012-02-09 22:33:01 -08:00
Jason Short
3afaf2689c Fix for disabled CH7 value triggering WP saving 2012-02-09 22:32:04 -08:00
Jason Short
4313d19bc5 2.3.1v 2012-02-09 22:22:01 -08:00
Jason Short
71d57a5371 Enabled PWM test 2012-02-09 22:22:01 -08:00
Jason Short
b315e23bbd Found missing Break in Switch statement. 2012-02-09 22:22:01 -08:00
Jason Short
2335b74bc3 faster FS timer 2012-02-09 22:22:00 -08:00
Jason Short
c35ad2d493 Loiter update - removed compensation curve. Did some more math and its's not worth the effort, harder to tune. 2012-02-09 22:22:00 -08:00
Jason Short
6848dc17e5 Added safety to prevent shutdown of motors during Auto-land 2012-02-09 22:22:00 -08:00
Jason Short
f40d40b0f9 Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that. 2012-02-09 22:22:00 -08:00
Randy Mackay
fe7a0a97ab ArduCopter - CH7 - changed default to CH7_DO_NOTHING 2012-02-09 20:26:01 +09:00
levinemax
345a23273e Motor mix update for X8 (octo quad), 
diagrams:
http://wiki.ardupilot-mega.googlecode.com/git/images/APM1/ACM-X8_APM14.jpg
http://wiki.ardupilot-mega.googlecode.com/git/images/APM2/FRAMES_X8.jpg
 2012-02-09 03:57:40 +00:00
Randy Mackay
3517964e14 ArduCopter - Camera.pde - turn off camera pitch control (which uses channel 6) when channel 6 is being used for tuning. 2012-02-08 23:51:53 +09:00
Randy Mackay
70f91e3cc3 Arducopter - reduced rate of decent when landing using sonar 2012-02-08 22:46:32 +09:00
Randy Mackay
f1a129c8ea ArduCopter - Log.pde - fixed Log_Read_Control_Tuning so that it doesn't read too many bytes. Also fixed up some comments 2012-02-05 16:56:51 +09:00
Randy Mackay
498970a948 TradHeli - tiny fix for yaw_offset. Yaw_offset is used to proactively counteract rotational force caused by changing the collective pitch (i.e. rapidly climbing or decending). There was a small bug for when the collective pitch is negative (i.e. powered decent) in which case the offset was in the incorrect direction. 2012-02-05 11:04:38 +09:00
Andrew Tridgell
1a861b3de5 allow for lower serial baud rates 
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
 2012-02-04 19:07:18 +11:00
Jason Short
ef9418c2de fix issue with low throttle in air 2012-02-03 13:29:59 +00:00
Michael Oborne
151479f769 fix issue 502 
to identify quad over mavlink
 2012-02-03 06:53:08 +08:00
Pat Hickey
dad4ee92e5 Revert all changes to ArduCopter Motors MOT mappings. 
Revert "Arducopter Motors Octa: Change V frame MOT_ output ordering."

This reverts commit bdab02f408ddc5451fcb4c6390b2475d31ac657f.

Revert "hexa frame FRAME_CONFIG fixup"

This reverts commit d15e692df613cb728ec671a54dce166f6f1940a0.

Revert "Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME"

This reverts commit cb0a8c62fbd07a8ae9dcb8d4fffce337ace1aa1c.

Revert "Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame"

This reverts commit 120d7f9050d5ec9f8fbe02c0ed4f38621949f4ee.

Revert "Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME"

This reverts commit 7d65ec311fd2e1222a36d0b34c366e21f3869fcc.

Revert "Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines."

This reverts commit 47c6e8662f4d5e8fb920f2049338541343d8d18e.

Revert "Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types."

This reverts commit 8259c90ec7cb29dedac19890cd9a4449b7399e36.
 2012-02-01 10:14:46 -08:00
analoguedevices
3288b518c0 credits 2012-02-01 04:44:36 +00:00
analoguedevices
6dbcac855a Incremented version number to 2.3 2012-02-01 04:39:15 +00:00
Pat Hickey
36389cdbd8 ArduCopter Octa: fix yaw motors for Octa V. 
* I based this off the APM1 Octa V diagram at
  http://code.google.com/p/arducopter/wiki/AC2_Multi
 2012-01-31 19:37:49 -08:00
Pat Hickey
6a333b743a Arducopter Motors Octa: Change V frame MOT_ output ordering. 
* I backed this out from Max's changes, but I'm not sure whether its correct.
 2012-01-31 18:19:41 -08:00
Pat Hickey
7ca81bd2c9 hexa frame FRAME_CONFIG fixup 2012-01-31 18:19:41 -08:00
Pat Hickey
a24f89fb6d Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME 2012-01-31 18:19:41 -08:00
Pat Hickey
0735c2b62f Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame 
* This will change the output order for APM2, but not APM1.
 2012-01-31 18:18:13 -08:00
Pat Hickey
dbd1cc6a9f Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME 2012-01-31 18:18:13 -08:00
Pat Hickey
b245265669 Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines. 
* HEXA_X_FRAME and HEXA_PLUS_FRAME merged back into HEXA_FRAME
* OCTA_V_FRAME merged back into OCTA_FRAME
 2012-01-31 18:18:13 -08:00
Pat Hickey
0e9294538b Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types. 
* HEXA_FRAME has been eliminated and changed to HEXA_X_FRAME and
  HEXA_PLUS_FRAME
* OCTA_FRAME stays the same name for X and +, but the V frame
  configuration requires new OCTA_V_FRAME name.
 2012-01-31 18:18:13 -08:00
Randy Mackay
b851d39eaa OptFlow - reenable OF_LOITER pid controller and reduce I term 2012-02-01 08:04:18 +09:00
Jason Short
21bd48b6c3 Loiter PIDs 2012-01-30 21:13:03 -08:00
Jason Short
8aaf88e13b tweaks to Loiter 2012-01-30 21:13:03 -08:00
Jason Short
90099d4a42 ATT tuning update 2012-01-30 21:13:03 -08:00
Jason Short
f225efef9f tuning 2012-01-30 21:13:03 -08:00
Jason Short
08a9249e2b cosmetic 2012-01-30 21:13:03 -08:00
Jason Short
5934b503b8 tuning fixes 2012-01-30 21:13:03 -08:00
Jason Short
31614c39dd Cosmetic 2012-01-30 21:13:03 -08:00
Jani Hirvinen
009e87105f Minor changes for PID for jDrones motors due latest changes on control laws. 2012-01-31 09:00:31 +07:00
Jason Short
23709bafef pid_nav_lat incorrectly labeled 2012-01-29 23:02:00 -08:00
Jason Short
a3862ced62 cosmetic 2012-01-29 21:55:17 -08:00
Jason Short
46e08fb46a Added more attributions 2012-01-29 21:53:44 -08:00
Jason Short
ae65a0f03f removed filter. Don't need it. 2012-01-29 17:10:52 -08:00
Jason Short
bf2cc6072d limiting alt hold rate error to 1m/s 2012-01-29 17:08:34 -08:00
Jason Short
02aacc454b Lowering the throttle_P values by default 2012-01-29 16:27:13 -08:00
Jason Short
650c0ed3f1 made Loiter over ride exit dependent not on speed, but centered sticks. 2012-01-29 16:15:02 -08:00
Randy Mackay
693a2cfdcd TradHeli - fix to servo limits. They had been unnecessarily limited to the collective pitch's min and max but actually there are cases (for example when the swash is leaning over 45degrees) where one servo goes well beyond the collective pitch's min or max. 2012-01-29 21:14:37 +09:00
Randy Mackay
974c825f4a Optflow - minor fix to D term defaulting 2012-01-29 21:06:41 +09:00
Jason Short
67cd412105 Landing update for better baro landing 2012-01-28 22:35:57 -08:00
Jason Short
5ab37a346c reduce test.pde size for 1280 users 2012-01-28 22:16:24 -08:00
Jason Short
7833cea9d4 2.2B6 - Please verify Heli still functions properly. 
Added AC_PID lib
Updated landing code
bug fixes
 2012-01-28 22:00:05 -08:00
Jason Short
295631139a formatting 2012-01-28 21:19:46 -08:00
Jason Short
d1fcebb5ca Cosmetic changes 
GPS LED lock waits for home_is_set to be true
 2012-01-28 21:19:46 -08:00
Jason Short
326a663c6b changed tuning range 2012-01-28 21:18:43 -08:00
Randy Mackay
f3a95ff3cb Arducopter - Tri - move yaw servo (channel7/motor7/CH_TRI_YAW) to mid point on startup 2012-01-28 10:13:58 +09:00
Randy Mackay
122623f64b OpticalFlow - added OF_LOITER flightmode 2012-01-28 09:27:16 +09:00
Pat Hickey
1dcd50e3be ArduCopter Tri: fix for enable_out of yaw servo, defined yaw servo for APM2 2012-01-27 07:39:01 -08:00
Randy Mackay
8dee001657 Sonar - changed default pin to A0 2012-01-26 22:50:48 +09:00
Pat Hickey
6c03307217 ArduCopter Heli: add motors_output_enable function 2012-01-25 22:41:09 -08:00
Randy Mackay
2c906b7b27 OpticalFlow - replaced PI controller with PID controller. 
Modified optical flow hold to use aggregated position instead of speed.
 2012-01-25 21:55:14 +09:00
Randy Mackay
4434ddf389 Optical flow - updated standard frame rate to 2000hz and increased resolution to 1600cpi 2012-01-25 21:53:20 +09:00
Jason Short
25529dec69 added loiter_d to allow users to configure alternate Loiter alg 2012-01-22 14:19:27 -08:00
Jason Short
74daadb252 Revert "test to switch loiter controls" 
This reverts commit 92270371d038f246d535f0ace9fc19272c44291d.
 2012-01-22 14:19:27 -08:00
Jason Short
6476ba22f2 test to switch loiter controls 2012-01-22 12:28:34 -08:00
Pat Hickey
89e11afc09 ArduCopter: Call APM_RC.enable_out for camera channels in init_camera() 2012-01-22 12:03:11 -08:00
Pat Hickey
98a90d0352 ArduCopter: Call motors_output_enable at correct spot during init 2012-01-22 12:03:11 -08:00
Pat Hickey
04a3112f33 ArduCopter: Add implementation of motors_output_enable to each motors_ frame type 2012-01-22 12:03:11 -08:00
Jason Short
dd1e08a7e0 Causes Aero_SIM to fail 2012-01-22 09:34:43 -08:00
Jason Short
1d9783652a added Beta 4 tag 2012-01-21 22:15:23 -08:00
Jason Short
60e3508f7c converted to cm 
Signed-off-by: Jason Short <jasonshort@mac.com>
 2012-01-21 22:14:08 -08:00
Jason Short
aace39e65c Converted distance gains to CM 
added loiter_d for rate control, equal to old Nav_P gain
 2012-01-21 22:13:57 -08:00
Jason Short
fffa1af3b3 Fixed speed governor which was letting speed get to 0. 
added Loiter_d to replace Nav_P for rate control
wp_distance calc now returns CM
 2012-01-21 22:12:57 -08:00
Jason Short
f638a4b81d recording nav_bearing rather than target bearing 
recording x and y speed rather than Iterms for nav since they are always 0 now
 2012-01-21 22:10:28 -08:00
Jason Short
2fa24e0557 added conversions of CM to M 2012-01-21 22:09:39 -08:00
Jason Short
7edd16e5fe Added Loiter_D to replace Nav_P for better separation of loiter and navigation tuning. 
Upped Nav_P defaults to 3 based on windy flight testing
Added minimum WP speed define of 1m/s
Upped loiter_I for better wind performance - was not seeing any overshoot in logs
Made Nav_I default of 0, since we are not using it in the code.
 2012-01-21 22:09:13 -08:00
Jason Short
59d1f225d5 convert command into CM from M 
Making Landing boost be one at minimum to trigger better navthrottle output
 2012-01-21 22:06:35 -08:00
Jason Short
f3cc1121aa better default for speed governer 2012-01-21 22:05:48 -08:00
Jason Short
5cc19bbe7c slightly less filtering for less latency 2012-01-21 22:04:54 -08:00
Jason Short
9003b95499 Converted to cm for distance 2012-01-21 22:04:35 -08:00
Jason Short
8cb645f3c2 increasing the velocity near WP 2012-01-21 11:59:49 -08:00
Jason Short
1aa6d0ea08 limiting the pitch throttle compensation 2012-01-21 11:59:49 -08:00
Jason Short
ab5716c42d Calc error for logs 2012-01-21 11:59:49 -08:00
Jason Short
7c25253422 Enabled auto throttle hold 2012-01-20 22:52:31 -08:00
Jason Short
7fb641ab77 added note 2012-01-20 22:52:31 -08:00
Jason Short
fb72ecd4e4 formatting 2012-01-20 22:52:31 -08:00
Jason Short
127544b833 Added cast for comparison 2012-01-20 22:52:30 -08:00
Jason Short
42b1362bba cleanup 2012-01-20 22:52:30 -08:00
Jason Short
5ac26a5500 error on comparison operator 2012-01-20 22:52:30 -08:00
Jason Short
5180592913 Added Auto_land_timeout to params 2012-01-20 22:52:30 -08:00
Jason Short
c190f83bb0 AutoLanding timeout for Mission Planner 2012-01-20 22:52:30 -08:00
Jason Short
a22596fb33 Max throttle output was to high 2012-01-20 22:52:30 -08:00
Jason Short
19053bb725 Updated Firmware version 2012-01-20 22:52:30 -08:00
Jason Short
f5fd3a0597 reset all I terms at Arming 2012-01-20 22:52:30 -08:00
Jason Short
287ffb5fb4 enabled Mavlink Land command 2012-01-20 22:52:30 -08:00
Jason Short
6784989e83 relocated reset_I term functions to central location 2012-01-20 22:52:30 -08:00
Jason Short
d2c78d2b75 Stab_D changes units with the new dampening controller updates 
Stabilize roll is raised to .1 - Flies great, and avoids a slow oscillation that could be affecting loiter.
Loiter P lowered to 1.5 based on feedback
 2012-01-20 22:52:30 -08:00
Jason Short
932869b686 renamed function 2012-01-20 22:52:30 -08:00
Jason Short
43365fe802 Verify land updates from JLN 
Effectively a throttle control for landing that mimics a person lowering the throttle.
 2012-01-20 22:52:29 -08:00
Jason Short
ed32ad30fd Refined the D term for stabilize 
moved all the rest_I terms from code into 1 central place
 2012-01-20 22:52:29 -08:00
Jason Short
5141534ea9 B3 2012-01-20 22:52:29 -08:00
Jason Short
db6db1ab91 set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units. 
added the ability to force nav_throttle so we  don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
 2012-01-20 22:52:29 -08:00
Jason Short
6e94b21d67 Altitude no longer resets when moving loiter WP 2012-01-20 22:52:29 -08:00
Jason Short
85f10589b2 slowed down slightly 2012-01-20 22:52:29 -08:00
Jason Short
017364fc5b Lowered range to more sensible values 2012-01-20 22:52:29 -08:00
Jason Short
2831ff9148 Off by default 2012-01-20 22:52:29 -08:00
Michael Oborne
3142a75913 AC fix attitude level hil 2012-01-21 07:52:52 +08:00
Michael Oborne
95f58b0432 fix scale error 2012-01-21 06:33:18 +08:00
Michael Oborne
1bebb9452b AC sync battery code with arduplane 2012-01-21 06:29:09 +08:00
Michael Oborne
52a9bb3cd1 fix SITL attitude hil AC 2012-01-20 16:32:25 +08:00
Doug Weibel
ed9f7cb1b6 Update battery monitoring code for ArduCopter 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
 2012-01-15 17:10:02 -07:00
Doug Weibel
0306bf97a0 Just a little more commenting work on global variables 2012-01-15 16:11:02 -07:00
Jason Short
e2c2a453a8 APM2 Channel assignments 2012-01-15 10:24:16 -08:00
Jason Short
3ebed0b278 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
Jason Short
46ef246e67 b2 2012-01-14 11:37:00 -08:00
Jason Short
0ae82da0fd Fix for SIMPLE mode 2012-01-14 11:32:48 -08:00
Jason Short
72faa6525e Tweak to make circle mode scripting more accurate 2012-01-14 11:21:50 -08:00
Jason Short
89343ae306 adjusted GPS watch dog not to be so aggressive, 
removed unneeded flag clearing
 2012-01-14 11:20:40 -08:00
Jason Short
95ac9d163e lowered Loiter I, commented out unused var 2012-01-14 11:20:40 -08:00
Jason Short
c02b403a06 temp removed alt D term until more testing 2012-01-14 11:20:40 -08:00
Jason Short
1843798697 Clarified the Increment for WP total 2012-01-14 11:20:40 -08:00
Jason Short
f97d58c753 added notes, removed redundant save wp_total 2012-01-14 11:20:40 -08:00
Jason Short
7877a872d3 added update throttle cruise function 2012-01-13 16:48:05 -08:00
Jason Short
1269b07d9a Made RTL always the current Altitude 2012-01-13 16:47:38 -08:00
Jason Short
ec9880f725 made resetting throttle cruise a function 2012-01-13 16:47:08 -08:00
Jason Short
6591089110 Disabled Ryans filter until we get real-world testing in. 2012-01-13 12:48:02 -08:00
Jason Short
8d909f6eed fixed GPS bug - moved to fast loop location 2012-01-13 12:47:22 -08:00
Jason Short
c327a9f000 made landing shoot for below home by 2 meters to avoid bounce up. 2012-01-13 12:46:40 -08:00
Jason Short
7c475f178c tuned down Alt hold D gain 2012-01-13 09:36:51 -08:00
Jason Short
4eacc6f3eb re-enabled relay test 2012-01-13 08:55:02 -08:00
Jason Short
ee7c948781 Added simple constrain for Alt d term 2012-01-13 08:49:55 -08:00
Jason Short
b0810e054e moved GPS routines to 50hz loop to avoid delay. 2012-01-12 22:59:47 -08:00
Jason Short
648a404ee1 Version 2.2 2012-01-12 22:37:33 -08:00
Jason Short
91e05834c8 removed wind comp code, 
Added Landing boost code
 2012-01-12 22:28:58 -08:00
Jason Short
4459fc4e34 Added a small D term on alt hold 2012-01-12 22:28:58 -08:00
Jason Short
6b85adb460 Added Landing throttle control to force down the copter 2012-01-12 22:28:58 -08:00
Jason Short
154411c96c removed unused defines 
lowered default Loiter gain
 2012-01-12 22:28:58 -08:00
Jason Short
569ff5046f Added Ryan's GPS lag filter 
Removed unused code
refined alt change
 2012-01-12 22:28:58 -08:00
Jason Short
a59c9ae22c added notes 2012-01-12 22:28:58 -08:00
Doug Weibel
9846822748 Bug fix for compass. 
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
 2012-01-12 14:44:24 -07:00
analoguedevices
70b7951366 Eliminated second instance of APM2 #defines 2012-01-12 20:38:41 +00:00
Jason Short
a7bce15365 R10 2012-01-11 22:41:51 -08:00
Jason Short
99ea69ef7b New Loiter control 2012-01-11 22:41:51 -08:00
Jason Short
257890d5be New Loiter Gains for new Loiter methods 2012-01-11 22:41:51 -08:00
Jason Short
98f637282b moved to verify_land 2012-01-11 22:41:51 -08:00
Jason Short
5e9db462f5 attempting to force down without using Manual boost. 2012-01-11 22:41:51 -08:00
Jason Short
f35411ac45 R9 2012-01-10 23:46:08 -08:00
Jason Short
84e001594d comma 2012-01-10 23:45:33 -08:00
Jason Short
4b54887c6c Switched to set_next_WP for mode switches 2012-01-10 23:43:44 -08:00
Jason Short
6b836d1a09 Fixed Type Error 2012-01-10 23:43:44 -08:00
Jason Short
c4476bdd80 Fixed type error 2012-01-10 23:43:44 -08:00
Jason Short
3e8ff39d4b Climb rate control 2012-01-10 23:43:44 -08:00
Jason Short
a79d302b98 added set_new_altitude call() 2012-01-10 23:43:44 -08:00
Jason Short
e102cb9e6a Added ending for auto landing 2012-01-10 23:42:27 -08:00
Jason Short
3a5ffc252d updated climb rate control 
Land detector
 2012-01-10 23:42:27 -08:00
Jason Short
acd877abda added set_new_altitude call 2012-01-10 23:42:27 -08:00
Jason Short
f36aba8af2 climb rate control 2012-01-10 23:42:26 -08:00
Jason Short
5a91396f63 Added climb rate control 
removed unused vars
 2012-01-10 23:42:26 -08:00
Jason Short
dab4fb43d4 Added altitude change flags 2012-01-10 23:42:26 -08:00
Jason Short
351be7c305 Made timer unsigned 2012-01-10 23:42:26 -08:00
Jason Short
7b8767d846 Added comments 2012-01-10 23:42:26 -08:00
Jason Short
b1e971ea18 added location error calc to get better data. Otherwise we'll be 1 GPS read off. 2012-01-10 23:42:26 -08:00
Jason Short
5f55780b5e Added comments 
moved out failsafe check. otherwise the reporting was erroneous.
 2012-01-10 23:42:26 -08:00
Jason Short
92f7b22722 Moved failsafe check to more logical place 2012-01-10 23:42:26 -08:00
Jason Short
cf92631d33 added #if to wind compensation code 2012-01-10 23:42:26 -08:00
Pat Hickey
fc6321b7ca ArduCopter motors_y6: rewrite CH_ macros with MOT_ macros 2012-01-09 22:06:49 -08:00
Pat Hickey
927e60d85b ArduCopter motors_y6: rewrite loop in terms of motors 2012-01-09 22:06:49 -08:00
Pat Hickey
ac7f6a5602 ArduCopter motors_tri: rewrite CH_ macros with MOT_ macros 
* Third Tricopter motor was on CH_4, so it is called MOT_4. This
  will be changed in a subsequent commit.
 2012-01-09 22:06:49 -08:00
Pat Hickey
73610ddb6c ArduCopter motors_octa_quad: rewrite remainder from CH_ macros to MOT_ macros 2012-01-09 22:06:48 -08:00
Pat Hickey
7f4c994346 ArduCopter motors_octa_quad: rewrite loop in terms of motors 2012-01-09 22:05:01 -08:00
Pat Hickey
e2be119433 ArduCopter motors_octa: rewrite remainder from CH_ macros to MOT_ macros 2012-01-09 21:57:02 -08:00
Pat Hickey
46b8037a73 ArduCopter motors_octa: rewrite janky loops to use ch_of_mot 
* Previously the loop was written over channels, now it is over motors
* the correct channel for that motor is determined by ch_of_mot.
* ch_of_mot is defined correctly based on the config_channels macros.
 2012-01-09 21:57:02 -08:00
Pat Hickey
79030a84b8 ArduCopter motors_hexa: rewrite remainder from CH_ macros to MOT_ macros. 2012-01-09 21:57:02 -08:00
Pat Hickey
f7e14fff37 ArduCopter motors_hexa: rewrite janky loops to use ch_of_mot 
* Previously the loop was written over channels, now it is over motors
* the correct channel for that motor is determined by ch_of_mot.
* ch_of_mot is defined correctly based on the config_channels macros.
 2012-01-09 21:57:02 -08:00
Pat Hickey
b907c1fd5c ArduCopter: add ch_of_mot lookup to motors.pde 2012-01-09 21:57:02 -08:00
Pat Hickey
7535c1c3fe ArduCopter test.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Pat Hickey
6a4442557c ArduCopter setup.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Pat Hickey
91bc2698a8 ArduCopter radio.pde: translate CH_ to MOT_ outputs 2012-01-09 21:57:02 -08:00
Pat Hickey
2f63c636ad Rename ArduCopter/config_motors.h to config_channels.h 2012-01-09 21:57:02 -08:00
Pat Hickey
f5b6746ad7 ArduCopter: Change TRI_FRAME yaw servo output to CH_TRI_YAW define 2012-01-09 21:57:02 -08:00
Pat Hickey
c105f64dca ArduCopter Camera.pde: changed from CH_n to CH_CAM_ notation. 2012-01-09 21:57:02 -08:00
Pat Hickey
e0e430895e motors_quad: translate from CH_ to MOT_ notation. 2012-01-09 21:57:02 -08:00
Pat Hickey
0b40f55334 ArduCopter: include config_motors.h in sketch 2012-01-09 21:57:01 -08:00
Pat Hickey
e5e8ed8a54 ArduCopter config_motors.h: stubs in for CH_CAM_PITCH and CH_CAM_ROLL 2012-01-09 21:57:01 -08:00
Pat Hickey
9eae2ec7fe ArduCopter config_motors.h: proper defs for APM1 MOT_[5..8] 2012-01-09 21:57:01 -08:00
Pat Hickey
a30558e9b2 ArduCopter config.h: add standard ifndef/define header macro wrappers 2012-01-09 21:57:01 -08:00
Pat Hickey
a7628b7f78 ArduCopter: add config_motors.h with MOT_n to CH_m mapping 
* APM1 values are not valid, but hopefully APM2 will stay that way?
 2012-01-09 21:57:01 -08:00
Pat Hickey
a19afd926a APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV 
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
  a separate macro expansion for the MSK value.
 2012-01-09 21:57:01 -08:00
Jason Short
78255b722e Slowed Auto Descent 
Don't return true in Landing code to prevent flyways in Stabilize
 2012-01-08 23:01:22 -08:00
Randy Mackay
f68d23d91e ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow) 
Removed optical flow from regular loiter for now until it's tested.
 2012-01-09 13:53:54 +09:00
analoguedevices
d46f36e624 Put in commented-out APM2 #defines, to save people the trouble of having to type them in themselves 2012-01-09 01:59:55 +00:00
Jason Short
d45c0ce9f2 Added Acro to Rate_P 2012-01-08 14:52:10 -08:00
Randy Mackay
3dfa26920f ArduCopter - changed Sonar to use A1 (was AN4) 2012-01-08 17:48:30 +09:00
Jason Short
f4b530ebb1 R8 2012-01-07 22:28:03 -08:00
Jason Short
48c211e055 Added finish to missions - auto-land or stabilize 2012-01-07 22:27:26 -08:00
Jason Short
9c8122e061 converted auto land to use the mission planner version 
Removed gate that looked for already set control_mode. Wasn't compatible with failsafe
 2012-01-07 22:27:26 -08:00
Jason Short
63be9c5f7b Moved wind comp into a define 2012-01-07 22:27:26 -08:00
Jason Short
06e032db68 Quad frame - X is default 
added wind comp stability option to config - off by default
 2012-01-07 22:27:26 -08:00
Jason Short
6678edf243 Auto-land updates - removed sonar option - not needed 
updates from JLN
 2012-01-07 22:27:26 -08:00
Jason Short
76dd79e7b5 Made RTL hold position until it reaches altitude 2012-01-07 22:27:26 -08:00
Jason Short
dd42f06275 Cleanup 2012-01-07 22:27:26 -08:00
Jason Short
faa9dd43cf scaled to 0-1023 2012-01-06 21:43:37 -08:00
Jason Short
ee0551037e Revved to R7 2012-01-06 10:22:53 -08:00
Jason Short
98f9a5f237 Forced Faildafe throttle mode to throttle Auto 2012-01-06 10:21:50 -08:00
Jason Short
5b66a09688 Added check for armed motors in failsafe 2012-01-06 10:21:23 -08:00
Jason Short
c9f60f239d Added Note 2012-01-06 10:20:59 -08:00
Jason Short
8f3c577e47 Made RTL go up 10m for failsafe 2012-01-06 10:20:48 -08:00
Jason Short
17873eb09c Changed default throttle type for failsafe to avoid checking 
changed timer to 20 seconds.
 2012-01-06 10:20:31 -08:00
Jason Short
e116636fe9 Auto_land update 2012-01-05 21:57:34 -08:00
Jason Short
e3c16fc1b1 Added auto_land to RTL 2012-01-05 21:15:12 -08:00
Jason Short
40ad164c8d Clears Auto_land timer 2012-01-05 21:15:12 -08:00
Jason Short
20661e5020 timer set to unsigned 2012-01-04 17:31:20 -08:00
Andrew Tridgell
df81a9459a ACM: reset all I terms on gyro calibration 2012-01-05 10:15:14 +11:00
Andrew Tridgell
2913948520 ACM: fixed a warning 
comment out some unused debug code
 2012-01-05 10:14:53 +11:00
Andrew Tridgell
c1c3115b42 ACM: fixed a alt hold bug 
== instead of =
 2012-01-05 10:14:30 +11:00
Andrew Tridgell
92f9c0b648 ACM: fixed a signed/unsigned warning 2012-01-05 10:14:12 +11:00
Andrew Tridgell
596a1f43f4 ACM-simple: don't use uninitialised simple trig values 2012-01-05 10:13:36 +11:00
Jason Short
3cf77729ef Disabled stable mode wind comp by default for release 2012-01-04 09:28:38 -08:00
Jason Short
28262dd825 Added Xplane output option 2012-01-04 09:28:38 -08:00
Jason Short
467ef66a77 Added home offset for altitude 2012-01-04 09:28:38 -08:00
Jason Short
40c649a27b Made landing disarm the motors 2012-01-04 09:28:38 -08:00
Jason Short
ed1ff0b171 Upped Revision 2012-01-04 09:28:38 -08:00
Jason Short
76cfdca6cc Cleaned up and documented each global vavriable 
Added Wind compensation for Stability
Acro mode fixes
 2012-01-04 09:28:37 -08:00
Jason Short
2e83e42764 Added precalc for wind compensation when entering Stabilze mode 2012-01-04 09:28:37 -08:00
Jason Short
e36d2f6e96 Added Wind compensation for Stabilize 
moved speed calc to it's own function
decreased acceleration from WPs
 2012-01-04 09:28:37 -08:00
Jason Short
fe8c99c49b removed PM test field 1 - not needed 2012-01-04 09:28:37 -08:00
Jason Short
a2c8f5af15 removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short
de6325fb8a removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short
cf9e744ed2 removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short
8ed2d96396 removed unused var 2012-01-04 09:28:37 -08:00
Jason Short
59f22f0ca0 removed airspeed 2012-01-04 09:28:37 -08:00
Jason Short
ecb3241489 calc_wind_compensation called when exiting AP modes 
Rate I terms reset in Acro Mode switch
Limit of 1 m set to alt hold
Reset circle angle to 0 by default
Land got land_complete var set to false by default
 2012-01-04 09:28:37 -08:00
Jason Short
4e0e783e7c added Reset_Rate_I function 
Removed I term from Throttle rate calc
Added some basic constrains to Acro
 2012-01-04 09:28:37 -08:00
Jason Short
b8c0bdb66f removed airspeed 2012-01-04 09:28:37 -08:00
Jason Short
92eece79a4 cleanup - removed unused functions, made pressure reading Float to avoid extra cast 2012-01-04 09:28:36 -08:00
Jason Short
e1232e7b80 cosmetic 2012-01-04 09:28:36 -08:00
Jason Short
e7b750074b Added takeoff state and ground state variable 2012-01-04 09:28:36 -08:00
Jason Short
37cda3c364 Cosmetic 2012-01-04 09:28:36 -08:00
Jason Short
2fc6a645b4 removed unused Airspeed config 2012-01-04 09:28:36 -08:00
Jason Short
b28ae04e0d Removed unused options 2012-01-04 09:28:36 -08:00
Jason Short
6513b12eb2 Cosmetic 2012-01-04 09:28:36 -08:00
Jason Short
67bf991598 removed unused Airspeed config 2012-01-04 09:28:36 -08:00
Jason Short
c7b5b747e8 change how Reset Nav params work - no longer clear I terms 2012-01-04 09:28:36 -08:00
Jason Short
580ad2c5ce Added JLN's landing patch, moved some variables local such as Jump counter 2012-01-04 09:28:36 -08:00
Jason Short
c0c2ea4ebb removed unused functions 2012-01-04 09:28:36 -08:00
Andrew Tridgell
ca39fc8b47 sitl: added build targets for different ACM frames 2012-01-04 21:45:46 +11:00
Andrew Tridgell
9d1c4ecfcd ACM: don't set defaults in APM_Config.h 
defaults set here prevent Makefile overrides, which breaks autotest
for non-default frame types
 2012-01-04 19:35:05 +11:00
Andrew Tridgell
cdd5589498 I2c: default to 5ms timeout, and faster bus speed 
we will slow down the speed when we get a failure
 2012-01-04 16:36:47 +11:00
Jason Short
26d0bf93ff Added more constraints around velocity 2011-12-31 10:59:59 -08:00
Jason Short
b3cea96970 Cosmetic 2011-12-31 10:54:31 -08:00
Jason Short
74b203c7f2 Lowered Yaw to prevent overshoot based on feedback 2011-12-31 10:10:45 -08:00
Jason Short
ea832c0818 upped to r5 2011-12-31 10:05:13 -08:00
Jason Short
1ef7f9fe62 Loiter I reset 2011-12-31 09:45:25 -08:00
Jason Short
0ace8474d7 R4 2011-12-30 23:54:02 -08:00
Jason Short
c6586810cf New Style WP navigation for high wind 2011-12-30 23:48:05 -08:00
Jason Short
2cb09f46e9 no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short
6a8391f0a7 removing I term clearance 2011-12-30 23:48:04 -08:00
Jason Short
28984a72e4 no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short
26267f75b2 Reverted to Crosstrack like in Arduplane, requires Degrees * 100 2011-12-30 23:48:04 -08:00
Jason Short
dac29af7ab Sync with Arduplane 2011-12-30 23:48:04 -08:00
Jason Short
c7f93f8718 Updated Configs based on field testing. 2011-12-30 23:48:04 -08:00
Jason Short
15a377d759 Added a default Yaw tracking setting 
Added Nav_Bearing
 2011-12-30 23:48:04 -08:00
Jason Short
84d3e3135f Added Nav_bearing, just like APlane 
added fix for LOITER in missions so we don't Yaw in circles
 2011-12-30 23:48:04 -08:00
Jason Short
cf48091d00 removed old loiter method option 2011-12-30 23:48:04 -08:00
Randy Mackay
3cb74cb459 ArduCopter - init_compass - fixed HIL build issue 2011-12-31 12:29:54 +09:00
Jason Short
3ea49e1415 updated rev 2011-12-29 23:02:41 -08:00
Jason Short
21460a57ae Yaw Performance tweaks 2011-12-29 23:02:03 -08:00
Jason Short
95a70cf32e lowered to nav_lat and nav_lon int16 
added a version that didn't have I term added to get a better indication of velocity estimation
 2011-12-29 23:02:03 -08:00
Jason Short
10abb7871e removed loiter I from Reset Nav 2011-12-29 23:02:03 -08:00
Jason Short
17acbc4572 updated Loiter gains 2011-12-29 23:02:03 -08:00
Jason Short
53c09774e5 removed Rate_I from Loiter, lowing Rate_P from Loiter too. Too aggressive leads to rapid oscillations in air, and not around loiter position. 2011-12-29 23:02:03 -08:00
Jason Short
2c1fe93856 cosmetic 2011-12-29 23:02:03 -08:00
Jason Short
6f42442e57 Added 5 sec Takeoff Timer to clear i terms when lifting 
Moved loiter relocation function to update_nav
moved User hooks to correct place
Added tuning for D term
 2011-12-29 23:02:03 -08:00
Jason Short
f41835d546 Added Stabilize_D parameter 2011-12-29 23:02:02 -08:00
Jason Short
bb954bc479 Upped Yaw speed to deal with performance complaints 
Added new Stabilize D term default of .25
 2011-12-29 23:02:02 -08:00
Jason Short
d055763947 Added second order, filtered derivative in stabilize. Works much better than the non-filtered one I used to have. 2011-12-29 23:02:02 -08:00
Jason Short
fa49aa5eec Fixes for Smooth Loiter 2011-12-29 23:02:02 -08:00
Jason Short
4f60fa412c Set Define for Max throttle 2011-12-29 23:02:02 -08:00
Jason Short
8a921e869c Fixed a 1280 only test 2011-12-29 23:02:02 -08:00
Jason Short
db96b9ec7a added define for Max throttle 2011-12-29 23:02:02 -08:00
Jason Short
244ca98264 Added Dampening term for tuning 2011-12-29 23:02:02 -08:00
Jason Short
7e1e1f84b3 updated Loiter PIDs 2011-12-29 23:02:02 -08:00
Jason Short
4b5437afe8 Enable Magnetometer by default 2011-12-29 23:02:02 -08:00
Jason Short
51e6170ecb Missing ; 2011-12-29 23:02:01 -08:00
Jason Short
4353f60f60 removed takeoff complete flag from missions, not used and would be useful elsewhere. 2011-12-29 23:02:01 -08:00
Jason Short
fbb35928fe removed unused function 
Simplified the baro init filter
 2011-12-29 23:02:01 -08:00
Randy Mackay
bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell
955dfe0226 ACM: check compass health before using it 2011-12-28 20:41:53 +11:00
Andrew Tridgell
03a16c6e45 ACM: use new I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell
433df08cb3 ACM: enable compass by default on APM2 2011-12-28 20:30:35 +11:00
Andrew Tridgell
73e6d5ee11 ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Jason Short
234121f3c3 Fix for 11 channels of motors. 2011-12-26 14:39:01 -08:00
Andrew Tridgell
4fe527aefa ACM: use LED_OFF/LED_ON instead of LOW/HIGH 2011-12-26 19:32:53 +11:00
Andrew Tridgell
111d156a99 ACM: fixed HIL build again 2011-12-26 19:17:11 +11:00
Andrew Tridgell
ab64a689c8 ACM-log: use DataFlash.df_NumLogs 
this fixes the flash size on APM2
 2011-12-26 19:17:11 +11:00
Randy Mackay
07041c2149 TradHeli - modified the default collective min/max values to restrict movement to about half the full range. 2011-12-26 16:59:01 +09:00
Jason Short
1afa25d9ef Tweaks to fix Loiter 
Changed save location to int32
added some filtering and smoothing
 2011-12-25 15:44:49 -08:00
Randy Mackay
c24b5229e1 AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Andrew Tridgell
0dadbf932a removed "Please run setup" loop from ArduCopter 
Chris asked for this to be removed as it was really mucking up the
initial experience setting up ArduCopter via the planner
 2011-12-24 18:12:51 +11:00
Jason Short
cc4f5e7c74 disabled some tests with warnings 2011-12-23 18:54:38 -08:00
Jason Short
0491d4feca added define for optflow 2011-12-23 18:45:01 -08:00
Jason Short
d7af42c925 Getting rid of Simple Logging 2011-12-23 18:44:30 -08:00
Jason Short
0f91fbcee5 Made WP radius 1 by default 2011-12-23 15:01:53 -08:00
Jason Short
d9590a44d6 Fixed merge issues 2011-12-23 14:51:40 -08:00
Jason Short
e5a3899b7f added ability to enter Loiter with only optflow available 2011-12-23 14:46:32 -08:00
Jason Short
73a73fbf35 moved some defines around 2011-12-23 14:46:32 -08:00
Jason Short
5518882c69 Fixed resolution issue with Xtrack 
Added stub for loiter based on estimation
integrated fix for tracking GPS at slow speeds for loiter
 2011-12-23 14:46:32 -08:00
Jason Short
2d46022a2b This is the test to deal with big props with lots of inertia. We use a low pass filter on positive acceleration. 2011-12-23 14:46:32 -08:00
Jason Short
58ad9faf6d initing z dampener at arming 2011-12-23 14:46:08 -08:00
Jason Short
5f03c62bd9 Too complicated 2011-12-23 14:46:08 -08:00
Jason Short
be4b031c7d added back in the Disabled log - gave up on Log Simple idea 2011-12-23 14:45:56 -08:00
Jason Short
ca8f71a705 used for testing 2011-12-23 14:42:50 -08:00
Jason Short
a966a178f8 increased crosstrack thanks to float math fix 
decreased loiter iterm, decreased throttle iterm based on simulator runs
 2011-12-23 14:42:50 -08:00
Jason Short
a284fc222c No longer blocking before initing home 2011-12-23 14:42:50 -08:00
Jason Short
79fff0f096 the second accel test is just for fun. 
Filtered output for Nav_throttle
 2011-12-23 14:42:50 -08:00
Jason Short
62cb407558 Begin to better integrate OptFlow, added necessary globals for Loiter estimation 2011-12-23 14:42:50 -08:00
Jason Short
85b564c5eb removed some unneeded HIL #defines 2011-12-23 14:42:49 -08:00
Pat Hickey
c40fccbc26 Log_simple uses identical implementation of do_erase_logs. 
* fix build1280.ArduCopter
 2011-12-22 13:31:28 -08:00
Pat Hickey
f1624621b3 ArduCopter Logging: DISABLED means DISABLED again; CONFIG_LOGGING added 
CONFIG_LOGGING selects LOGGING_SIMPLE and LOGGING_VERBOSE. Verbose
logging is the default, implemented in Log.pde. Simple logging is
optional, but the default for the 1280 build, implemented in
Log_simple.pde
 2011-12-19 21:04:51 -08:00
Randy Mackay
310f072d50 Arducopter - added "//#define APM2_BETA_HARDWARE" to AP_Config.h for developer's who received early version of the board with the old barometer 2011-12-19 22:57:00 +09:00
Jani Hirvinen
106801a59c config settings for jD motors 2011-12-19 09:29:05 +07:00
Jason Short
b53a6bd4b4 Hexa stability patch bug fix by borna.segulin 2011-12-18 16:38:07 -08:00
Jason Short
239eb53983 change Alpha name 2011-12-18 16:38:07 -08:00
Andrew Tridgell
ad9c0533d8 ACM: run mavlink loop while erasing logs 2011-12-18 10:19:41 +11:00
Jason Short
8970948804 Sync logging 2011-12-16 22:02:41 -08:00
Jason Short
47e4c875e1 Cleanup 
removed Iterm experiment - no noticeable effect in actual flight
 2011-12-16 20:47:23 -08:00
Andrew Tridgell
f6f808357c removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Jason Short
2fc25d963d renamed super simple, added framework for auto calc of throttle cruise 2011-12-15 20:51:41 -08:00
Jason Short
3019c35364 turned off iterm for traverse 2011-12-15 20:51:41 -08:00
Jason Short
f11f2c6d97 added some more throttle imax range 
renamed Super Simple
 2011-12-15 20:51:41 -08:00
Jason Short
72605f846c renamed super simple 2011-12-15 20:51:41 -08:00
Jason Short
88b3708dcf added altitude to circle mission 2011-12-15 20:51:40 -08:00
Jason Short
0ba8a9f30b Allows user to specify just an altitude for Circle Mode 2011-12-15 20:51:40 -08:00
Jason Short
4e280bb0dc More power to descend 2011-12-15 20:51:40 -08:00
Jason Short
3446744ae9 Addition of nav mode that tries to maintain level 2011-12-14 22:08:42 -08:00
Jason Short
4d90058c90 dupe of landing logic for scripting 2011-12-14 22:08:41 -08:00
Jason Short
f48e394511 made the last step of landing stop navigating so we can drop straight down. 2011-12-14 22:08:41 -08:00
Jason Short
1251e8105d Added failsafe check 2011-12-14 22:08:41 -08:00
Jason Short
c6657f4a93 updated Loiter control to provide an alternative to GPS rate control for users with circling issues. Works in SIM, needs flight testing 2011-12-14 22:08:41 -08:00
Jason Short
d2fd6c5ee5 added loiter control to reset nav 2011-12-14 22:08:41 -08:00
Jason Short
8691b10ee9 added failsafe check, 
enable loiter repositioning
 2011-12-14 22:08:41 -08:00
Doug Weibel
5d197ae337 Change logging to default on for 2560 2011-12-13 20:53:44 -07:00
Doug Weibel
8b78c4a4c5 Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Michael Oborne
e20d3a3676 add method of detecting if motors are armed 2011-12-14 06:18:29 +08:00
Randy Mackay
7f64080877 Arducopter - Attitude.pde - fixed small bug in pitch stabilise 2011-12-13 22:10:51 +09:00
Andrew Tridgell
483bef35e5 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell
888d6226b2 fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Jason Short
edc3a731d4 Adjustments for High Wind enviroments 2011-12-12 17:47:45 -08:00
Jason Short
ba8fc57bd8 Stability patch2 - Jose style. 2011-12-12 17:47:45 -08:00
Jason Short
c9b317fc27 Gain updates 2011-12-12 17:47:45 -08:00
Jason Short
f3e408e7e0 Added a simplified Log that is just GPS for my 1280 board 2011-12-12 17:47:45 -08:00
Jason Short
e4559bbf5c Added param option for Simple mode reset 2011-12-12 17:47:45 -08:00
Jason Short
d83ad1acd4 Upped the max pitch to deal with wind - based on T3 testing 2011-12-12 10:10:33 -08:00
Jason Short
6bc90d6289 Just upped the nav_imax value 2011-12-12 10:10:33 -08:00
Andrew Tridgell
a22893124d fixed LOGGING_ENABLED default on ArduCopter 2011-12-12 23:40:43 +11:00
Andrew Tridgell
5760239670 quad: fixed the comments on the + motors 2011-12-12 21:01:58 +11:00
Andrew Tridgell
d076fb54b5 fixed barometer detection on APM2 2011-12-12 15:45:36 +11:00
Andrew Tridgell
f5e439554d fixed == that should be = 2011-12-12 15:19:50 +11:00
Andrew Tridgell
358dc91d41 fixed hil ArduCopter build 2011-12-12 15:14:55 +11:00
Andrew Tridgell
07dba4eff7 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Andrew Tridgell
1b1c629167 added sitl build target 2011-12-12 15:14:55 +11:00
Andrew Tridgell
011110e1dd airspeed: use floating point values and better averaging in zero_airspeed() 
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
 2011-12-12 15:14:55 +11:00
Pat Hickey
a48c65b5b5 ArduCopter: update AP_Baro constructors & initializers 2011-12-11 15:21:10 -08:00
Pat Hickey
f3ad7f3af8 Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Pat Hickey
6dbd6b4181 ArduCopter: Get barometer data in terms of AP_Baro interface 
* Major change: Log.pde Log_Write_Control_Tuning has changed significantly
* MS5611 has no concept of RawPres and _offset_press
* Log the get_pressure() instead. (If we don't trust the barometer, what's the point?)
 2011-12-11 15:21:10 -08:00
Pat Hickey
39fe9075d9 ArduCopter Init: different call to barometer.init based on CONFIG_BARO 
* BMP085 has two arguments, second varying on apm1/apm2
* ms5611 has no arguments
 2011-12-11 15:21:10 -08:00
Pat Hickey
b055aa6f81 ArduCopter: instantiate correct AP_Baro object based on CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey
d7f77aec93 ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define 
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
  config.h takes care of this default.
 2011-12-11 15:21:09 -08:00
Pat Hickey
62844d8ddc ArduCopter: added config.h and defines.h to support CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey
de6507a47d ArduCopter: Rename APM_BMP085 classes to AP_Baro_BMP085 classes. 2011-12-11 15:21:09 -08:00
Pat Hickey
8d878a2cae ArduCopter CLI: Add imu.init before imu.init_accel for "level" 
* Depending on when you entered the CLI, the imu might not be
  initialized yet, and init_accel would hang.
 2011-12-11 15:19:46 -08:00
Pat Hickey
2e200834e1 ArduCopter: Revert "Switched to Gyro only startup" 
This reverts commit f932f0a9f6a29e9c3193622109298c657ed5a908.

I fixed this bug in 734185599cd9d6a487c675460c09895172e012b0.

It is no longer valid to call IMU::init_gyro() before IMU::init().
 2011-12-11 14:50:02 -08:00
Jason Short
5d0e3664ad Hack to prevent fly aways 
Cleanup to remove SIMPLE mode switch note
 2011-12-11 12:01:06 -08:00
Jason Short
e8e126a636 removed CLI switch by default, decreased Nav I 2011-12-11 09:53:44 -08:00
Jason Short
c1aa015ef1 added debug prints, broke out Angle val to debug 2011-12-11 09:53:44 -08:00
Jason Short
a685e5b575 fix for navigation scaleLongUp 2011-12-11 09:53:44 -08:00
Randy Mackay
fe336fb749 ArduCopter - small fixes to fix HIL compile errors 2011-12-11 23:25:03 +09:00
Randy Mackay
67855b207d Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short
f89fed02c3 made it so nav is called in Simple mode 2011-12-10 23:31:37 -08:00
Jason Short
4659a9ffce Adjust Simple mode on the fly. 2011-12-10 23:29:29 -08:00
Jason Short
af0ae6a10f Set Nav_WP as home 2011-12-10 23:26:10 -08:00
Jason Short
1f3abcf048 eased up on the i term blocker 2011-12-10 23:25:52 -08:00
Jason Short
069bcbf5e6 Made landing slower 2011-12-10 19:33:19 -08:00
Jason Short
873daae095 Allows you to clear the stored mission when in Auto 2011-12-10 19:32:46 -08:00
Jason Short
29554b7d73 Will add a landing command to last WP if we are on the ground. 2011-12-10 19:29:42 -08:00
Jason Short
648ab5f4ae Switched to Gyro only startup 2011-12-10 15:13:20 -08:00
Jason Short
f3ff7aa0a8 rework of inflight trim. 2011-12-10 15:05:53 -08:00
Jason Short
5e12924907 Removed Instant PWM from disarmed output 2011-12-10 10:33:25 -08:00
Jason Short
0289e35347 Ground course saved as long for SIM compat 2011-12-10 10:19:20 -08:00
Jason Short
84b72b627b Added SIMPLE mode reset outside of bounding box of 10M, will do more testing before enabling. 2011-12-10 10:19:20 -08:00
Jason Short
7cecca74bc Made Baro_alt int32_t 
Added home to copter bearing, home to copter distance
Added Land mode
 2011-12-10 10:19:20 -08:00
Jason Short
69f1841d8e Debugging some motor issues 2011-12-10 10:19:20 -08:00
Jason Short
76d60a2111 Added Home Bearing 2011-12-10 10:19:20 -08:00
Jason Short
d9347290a4 Added notes to Imu.ax, ay, az 2011-12-10 10:19:20 -08:00
Jason Short
2b8280e533 Added enumeration for Land 2011-12-10 10:19:20 -08:00
Jason Short
307723960d Increased slightly the Auto_trim time 2011-12-10 10:19:20 -08:00
Jason Short
3ff7b047d5 Added Bearing to home, distance to home calcs 2011-12-10 10:19:20 -08:00
Jason Short
49806d93d9 Added Land FLight mode definition 2011-12-10 10:19:20 -08:00
Randy Mackay
0b24914066 OptFlow - turning on optical by default 2011-12-10 23:22:40 +09:00
Randy Mackay
fa0723f115 ArduCopter - removed limitation on Maxbotix sonar type requiring ADC so it can work with APM2. 
modified default analog pin in test sketch to be AN4 which is consistent with APM2 default
 2011-12-10 18:33:30 +09:00
Pat Hickey
cc38189f71 ArduCopter config: Correct LOGGING_ENABLED defaults to force disable for 1280 
Per email, this is what Jason meant to do in aeb92870, but previous code
forced logging enable for all non-1280 users.
 2011-12-09 15:06:10 -08:00
Randy Mackay
4dc2956ca9 Navigatino - small bug fix in loiter controller in which the y_iterm was coming from the Lon controller instead of the lat controller. Found by Sylvain. http://www.diydrones.com/forum/topic/listForContributor?user=18fsncw0k1x6i 2011-12-09 22:13:37 +09:00
Randy Mackay
42421a09e2 TradHeli - Attitude.pde - made yaw contol use jason's stability patch 
Quad - fixed small bug in pitch control (was using roll's stabilise controller)
 2011-12-08 22:23:50 +09:00
Randy Mackay
68e6be5eeb TradHeli - fixed roll/pitch so it's not scaled when throttle is scaled 2011-12-08 21:30:47 +09:00
Doug Weibel
502a98dda1 Add hook to dump log filesystem index for debugging 2011-12-07 08:13:30 -07:00
Jason Short
6dfdd754ea Stability patch updates, 
Cleanup
 2011-12-06 21:03:56 -08:00
Jason Short
05409b8c1c made RateP range a little more sensible 
removed unused var
 2011-12-06 21:03:07 -08:00
Jason Short
a632c49b44 Alt_hold_patch, removed Z dampening from Manual override. Fixed integrator conversion to throttle_cruise 2011-12-04 21:32:33 -08:00
Jason Short
e8a14c8d93 simple patch to improve alt hold based on stability patch 2011-12-04 21:32:33 -08:00
Jason Short
9bc6fce3b8 Function call defs commented with // so the preprocessor doesn't get confused 2011-12-03 17:55:44 -08:00
Jason Short
0d8071a401 Added new gain and clamp value for DCM 2011-12-03 17:55:11 -08:00
Jason Short
54c8e1033c Fixing reversed Simple mode switch 2011-12-03 17:54:57 -08:00
Jason Short
aad45c692f Stability patch from 55 2011-12-03 17:54:38 -08:00
Jason Short
778393c4a7 Enabled the compass test 2011-12-03 15:39:02 -08:00
Jason Short
5ed300db7e disabled Flash logs in 1280 by default 
Added stability patch I values and limits
 2011-12-03 15:38:46 -08:00
Jason Short
c99da66506 Formatting, swicth Omega to raw IMU rates 2011-12-03 15:29:33 -08:00
Jason Short
401c985572 Added Deg to rad, rad to deg * 100 to save a float calc 2011-12-03 15:29:33 -08:00
Jason Short
d7cc241f85 formatting 2011-12-03 15:29:33 -08:00
Michael Oborne
4c61462dfd Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-12-04 06:32:27 +08:00
Michael Oborne
edf3195384 add 1hz mavlink loop. 2011-12-04 06:32:08 +08:00
Andrew Tridgell
39a36fe946 fixed the "reboot on GPS lock" bug 
the problem was that with APM2 we may not have a 2nd GCS instance. The
"gps alt: xxx" message was being unconditionally sent to both GCS
instances, which caused a crash
 2011-12-04 09:06:58 +11:00
Andrew Tridgell
aaac6212ab MAVLink: use the configured system ID for ArduCopter 2011-12-03 07:54:36 +11:00
Jason Short
9931cacec7 Enabled Ch7 simple mode switching 2011-11-28 22:41:12 -08:00
Jason Short
69dd8264e6 adding flag for finished mission 2011-11-28 22:28:51 -08:00
Jason Short
b92b4e9092 cleanup 2011-11-28 21:40:22 -08:00
Jason Short
eb6d34e1fc Fix error with calc_nav_pitch_roll 2011-11-28 21:27:29 -08:00
Doug Weibel
88ab4f7d70 Fix for intermittent bug of log #1 starting on page 2 and confusing file system 2011-11-28 19:43:10 -07:00
Doug Weibel
b03de3095e Add DataFlash.Init before doing a forced log erase on eeprom reset. 
Add progress indication during log erase
 2011-11-28 19:42:27 -07:00
Jason Short
b4a0d8a275 Fixed navigation bug 2011-11-28 14:22:05 -08:00
Jason Short
ce5ad442fc Git Test 2011-11-28 10:54:20 -08:00
Jason Short
62ed256fca made the crosstrack use the previous WP instead of the current loc to get a better line in AP. 2011-11-28 10:33:06 -08:00
Jason Short
82adf1df6b removed need to send increment flag to update commands 
constrained climb_rate value
 2011-11-28 10:33:06 -08:00
Jason Short
504b4b52d6 slight refactoring to avoid the increment issue when changing commands 2011-11-28 10:33:06 -08:00
Jason Short
4a6feb3acb better comments out of some old unused functions to avoid compiler errors 2011-11-28 10:33:06 -08:00
Jason Short
909e5796eb Logging input to find this freeze bug 2011-11-28 10:33:06 -08:00
Jason Short
df57380adc Erasing Logs causing major havoc. Users getting infinite loop. 2011-11-28 10:33:05 -08:00
Jason Short
cc1593d16d made Logs dump with dump 0 or -1 2011-11-27 22:23:02 -08:00
Jason Short
b3bd4bd3c9 Cosmetic cleanup, commented functions for compiler warnings 2011-11-27 22:23:02 -08:00
Jason Short
fb5302c50b No longer resetting ch7 wp index with mode change, requires reboot 2011-11-27 22:23:02 -08:00
Andrew Tridgell
2cabb11307 mavlink: don't force CLI and HIL with mavlink10 build 2011-11-28 16:22:33 +11:00
Jason Short
940fa9621c Added minimum Altitude for RTL failsafe 2011-11-26 16:39:29 -08:00
Jason Short
44cb73c9fa added safety checks for RTL 2011-11-26 16:39:29 -08:00
Jason Short
d0af4e7200 CH7 with params 2011-11-26 16:39:29 -08:00
Jason Short
ec5b080167 Enable RTL 2011-11-26 16:39:29 -08:00
Jason Short
ca5e4bb802 Allow output of system type 2011-11-26 16:39:28 -08:00
Jason Short
1621f3a638 allow CH7 to be set via params 2011-11-26 16:39:28 -08:00
Jason Short
ea911e0bcb updated failsafe code 2011-11-26 16:39:28 -08:00
Jason Short
19c3c27ed0 Erasing Logs at new FW version detection 2011-11-26 16:39:28 -08:00
Jason Short
52297679c4 sending Mavlink system type 2011-11-26 16:39:28 -08:00
Andrew Tridgell
a048709828 Logs: don't print hundreds of bogus log boundaries 
this can take quite a long time
 2011-11-26 17:02:55 +11:00
Andrew Tridgell
a99bcec762 desktop: report motors armed in desktop build too 
this helps in autotest
 2011-11-25 20:00:19 -08:00
Pat Hickey
6ee477bd8d ArduCopter: rev version number from 2.0.51 to 2.1.0 Alpha 2011-11-25 20:00:19 -08:00
Andrew Tridgell
38c85c44ae ArduCopter: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell
3a542b3ef3 USB-MUX: enable USB MUX switching for ArduCopter 2011-11-25 20:00:19 -08:00
Andrew Tridgell
338445e60c ArduCopter-HIL: fixed HIL build 
Logging isn't always enabled
 2011-11-25 20:00:18 -08:00
Andrew Tridgell
ffba37d599 desktop: first version of register level SITL support 
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
 2011-11-25 20:00:18 -08:00
Andrew Tridgell
aa558eb033 fixed a valgrind error 
this error is harmless, but false positives can disguise real errors
 2011-11-25 20:00:18 -08:00
Pat Hickey
eee2da01ac Arducopter: each motors_ pde uses APM_RC.SetFastOutputChannels 2011-11-25 20:00:18 -08:00
Pat Hickey
ea4c220ee9 APM_RC: OCR register init moved from ArduCopter/radio.pde to lib inits. 2011-11-25 20:00:18 -08:00
Andrew Tridgell
6093db948b compass: added AP_COMPASS_APM2_SHIELD 
this makes the orientation clearer
 2011-11-25 20:00:18 -08:00
Andrew Tridgell
41caa949ca fixed InertialSensor stub build 2011-11-25 20:00:18 -08:00
Pat Hickey
1d50bb80fd hil-sensors ArduCopter: fixes to make hil-sensors build work properly 
* requires new stub libraries for InertialSensor and PeriodicProcess.
 2011-11-25 20:00:18 -08:00
Andrew Tridgell
1e41b4b2b0 timer_scheduler doesn't exist in HIL_MODE_ATTITUDE 2011-11-25 20:00:18 -08:00
Andrew Tridgell
a3701e521a build: added hlsensors target 2011-11-25 20:00:18 -08:00
Andrew Tridgell
1c20efe4b8 re-organiser sensor declarations 
this tries to make the #ifdef nesting easier to understand
 2011-11-25 20:00:17 -08:00
Andrew Tridgell
2a5a15abce test: fixed test code for HIL build 2011-11-25 20:00:17 -08:00
Andrew Tridgell
3072fdda85 adc.Init() needs timer_scheduler 2011-11-25 20:00:17 -08:00
Andrew Tridgell
c0898ab3b9 purple: timer_scheduler should be in all builds 2011-11-25 20:00:17 -08:00
Andrew Tridgell
2d8cfc0c3f test: neaten up the output of the dcm test 2011-11-25 20:00:17 -08:00
Pat Hickey
3131ab16ef remove BROKEN_SLIDER code 
use the new CLI_SLIDER_ENABLED option and the "hit ENTER 3 times"
method
 2011-11-25 20:00:17 -08:00
Pat Hickey
475afd6ac2 purple: enable dcm test, and fixed imu test to test the IMU API 2011-11-25 20:00:17 -08:00
Pat Hickey
c2972ff1f9 purple: fixed CLI code for non-ADC hardware and no sonar 
purple hardware does not use the ADC driver
 2011-11-25 20:00:17 -08:00
Pat Hickey
63393b206a purple: added ins test 
this tests the InertialSensor library API
 2011-11-25 20:00:17 -08:00
Pat Hickey
f1bad83d21 purple: fixed system init for purple sensor objects 2011-11-25 20:00:16 -08:00
Pat Hickey
e3027fe54e purple: pass isr_registry to APM_RC.Init() 2011-11-25 20:00:16 -08:00
Pat Hickey
660174e610 purple: switch ArduCopter to new sensor objects 
this uses the new sensor abstractions for the purple/APM1 hardware
choice
 2011-11-25 20:00:16 -08:00
Pat Hickey
4869ac3385 purple: use the new LED_ON/LED_OFF macros for LED level 
this gets this right on both APM1 and purple for ArduCopter
 2011-11-25 20:00:16 -08:00
Pat Hickey
3f2692d1da purple: added configuration logic for APM1 versus purple hardware 
This abstracts the names for LED on/off (due to the different wiring
of LEDs on APM1 and purple), and adds the needed config defines for
the two hardware types
 2011-11-25 20:00:16 -08:00
Pat Hickey
90c5eb8487 purple: added defines for APM hardware selection 
we can now choose APM_HARDWARE_APM1 or APM_HARDWARE_PURPLE
 2011-11-25 20:00:16 -08:00
Pat Hickey
cc67062442 build: added new command line build targets 
this makes it more convenient to build common options
 2011-11-25 20:00:16 -08:00
Pat Hickey
5ee5036fa1 purple: added comment for enabling purple hardware 2011-11-25 20:00:16 -08:00
Andrew Tridgell
89d2f0f849 mod barometer.Init() based on hardware 2011-11-25 20:00:15 -08:00
Michael Oborne
0a0b2d32f4 Add rc input to cli planner mode 2011-11-26 11:23:14 +08:00
Jason Short
abe4758c3b no longer using the raw pressure 2011-11-25 11:34:05 -08:00
Doug Weibel
9ecfac1156 Change ArduCopter DataFlash log file system to new file system which allows overwriting logs. 
Also changed the feature to dump all DataFlash memory to occur when user requests dumping log "-1"
 2011-11-25 07:17:15 -07:00
Jason Short
c5c5884006 v number 2011-11-21 22:13:18 -08:00
Jason Short
89e014c06a Added alternate alt hold, 
New ESC Calibration Routine
 2011-11-21 22:12:19 -08:00
Jason Short
85a5647f5d cleanup 2011-11-21 22:11:06 -08:00
Jason Short
6d99e78887 removed unused function 2011-11-20 21:59:55 -08:00
Jason Short
95b797d359 removed the init_esc - reworking the method to avoid the use of the CLI. 2011-11-20 21:24:32 -08:00
Jason Short
5c797e91b5 Better function definition 2011-11-20 20:32:46 -08:00
Jason Short
beeba99b92 Missed a function definition for no_logs option 2011-11-20 20:29:58 -08:00
Jason Short
2600f19172 RTL Yaw hold as default 2011-11-20 12:50:13 -08:00
Jason Short
fbf09dbf2d Made save WP the default 
Cosmetic updates
 2011-11-20 12:50:12 -08:00
Randy Mackay
f397bae793 ArduCopter Alt Hold - Change to not run get_nav_throttle if manually adjusting altitude with manual_boost - removes possibility of I term running up 
Tuning - added ability to modify altitude (position, not rate) controller
TradHeli - Fairly large change to how throttle is scaled and collective moves.
 2011-11-20 22:30:42 +09:00
Jason Short
17041e5346 my take at a merge to give tridge a head start at Mav1.0 2011-11-20 00:23:40 -08:00
Jason Short
556db68d2d Made loiter rad smaller in storage 2011-11-20 00:22:53 -08:00
Jason Short
7feecf3220 renamed WP mask 2011-11-20 00:22:53 -08:00
Jason Short
185c2a50ce added some params from Arduplane to make Mavlink upgrade easier 
made loiter radius smaller in storage
 2011-11-20 00:22:53 -08:00
Jason Short
94ef8a91ff removed typo 2011-11-20 00:22:52 -08:00
Jason Short
1e855503da renamed MASK_OPTIONS_RELATIVE_ALT 2011-11-20 00:22:52 -08:00
Jason Short
c6f9c532af renamed set_command_with_index 2011-11-20 00:22:52 -08:00
Jason Short
b883ff937c renamed the options_mask 2011-11-20 00:22:52 -08:00
Jason Short
77da1227bb renamed set_cmd function 2011-11-20 00:22:52 -08:00
Jason Short
10a24f22fa renamed set_cmd function 2011-11-20 00:22:52 -08:00
Jason Short
aef4db8263 Logging stabilization KP to hunt bug 2011-11-19 16:59:54 -08:00
Jason Short
194778a6f9 Logging APVar saves 2011-11-19 16:59:54 -08:00
Jason Short
90bc03ef99 new DataLog message 2011-11-19 16:59:54 -08:00
Jason Short
56179a24e1 Added Arbitrary data logging 2011-11-19 16:59:54 -08:00
Jason Short
b6adfdb62f missed == 2011-11-19 14:42:57 -08:00
Jason Short
eef04a5a54 removed some tests 2011-11-19 14:02:00 -08:00
Jason Short
8e1f311c36 s 
shortened strings, logging defines updated
 2011-11-19 14:01:47 -08:00
Jason Short
8e509b63a7 shortened strings for mem 2011-11-19 14:00:55 -08:00
Jason Short
d02b4342ae removed some unused code, made output min by default 2011-11-19 14:00:42 -08:00
Jason Short
d1c161ecd0 Upped version 
added new logging params
added crosstrack gain
re-ordered param inits
 2011-11-19 14:00:23 -08:00
Jason Short
39d0df4cef added param for crosstrack gain defaulted to 4 2011-11-19 13:59:37 -08:00
Jason Short
9bc4328724 Added crosstrack gain and lowered alt hold rate gain 2011-11-19 13:59:15 -08:00
Jason Short
e4f2ad1809 remove PI_crosstrack 2011-11-19 13:58:53 -08:00
Jason Short
579096cd2e return to prev climb rate calc 2011-11-19 13:58:41 -08:00
Jason Short
35524f6da7 Added optimizations for radian calls to remove a division. 
added a protection for entering AP modes without Home being set by GPS lock.
 2011-11-19 11:08:13 -08:00
Jason Short
791fd194a4 added logging of raw baro 2011-11-19 11:08:13 -08:00
Jason Short
802dd6994a PM restored to normal output 2011-11-17 10:37:01 -08:00
Jason Short
7ebab2a9fe Log type error fix 2011-11-17 10:27:02 -08:00
Randy Mackay
c8d2341156 TradHeli - automatically reinitialise swash plate if HSV_MAN is switched from 1 to 0. 
Turn-off feed forward correction to yaw based on collect when in HIL mode.
 2011-11-17 20:43:07 +09:00
Jason Short
a168691eba Working implementation of Jump Command 2011-11-16 21:28:56 -08:00
Jason Short
ddd89e1849 Mission Scripting updates 2011-11-16 00:22:23 -08:00
Jason Short
833fe17c6a disabled raw GPS temp 2011-11-16 00:22:23 -08:00
Jason Short
fed5c0b204 Mission Scripting updates 2011-11-16 00:22:23 -08:00
Jason Short
8392e375e1 Do not write home from GS, 
MAV_Action_Continue disabled until I find out what it does and how to do it.
 2011-11-16 00:22:23 -08:00
Jason Short
937a364dce Made RTL Altitude hold current by default 2011-11-16 00:22:23 -08:00
Jason Short
0245e73a8b Mission Scripting re-write 2011-11-16 00:22:23 -08:00
Jason Short
163345dadd Mission Scripting re-write 2011-11-16 00:22:22 -08:00
Jason Short
65fe467a57 Mission Scripting re-write 2011-11-16 00:22:22 -08:00
Jason Short
5ed931c582 Mission Scripting re-write 2011-11-16 00:22:22 -08:00
Jason Short
3eaef4081c Added better navigation flag for more accurate dtnav timing 
Added better support for climb rate in SIM
 2011-11-16 00:22:22 -08:00
Jason Short
c343cee727 Fixed typo in notes about timer speed 2011-11-14 12:25:06 -08:00
Jason Short
2ad1294514 scaling width of circle mode to make it more round. 2011-11-13 23:09:42 -08:00
Jason Short
687d0eda98 fixed bad indexing for setting current mission index 2011-11-13 22:59:57 -08:00
Jason Short
be1007d032 Moved updated alt to GPS so the climb rate is sane 2011-11-13 22:54:57 -08:00
Jason Short
288db5c7c5 Better error and defaults checking 2011-11-13 22:54:18 -08:00
Jason Short
349ab7e0c6 slowed Circle flight 2011-11-13 13:41:23 -08:00
Jason Short
daaf681417 error checking command saving 2011-11-13 13:41:23 -08:00
Randy Mackay
2112f74324 TradHeli - reversed the direction of "phase angle" to make it more intuitive. This parameter is used to correct for a heli's tendency to lean left or right when the pilot gives it a pitch forward command. 2011-11-13 22:40:46 +09:00
Randy Mackay
70aadd4afc TradHeli - added two parameters to improve heli control. 
heli_phase_angle allows pilot roll/pitch command to be translated into mixed roll and pitch.
heli_coll_yaw_effect mixes some collective into the yaw so tail can counter act collective movements more easily.
 2011-11-13 22:20:57 +09:00
Jason Short
930ee51bbe added scale note 2011-11-13 00:25:04 -08:00
Jason Short
04491d66db Fixed scaling issue with Circle mode 2011-11-13 00:24:25 -08:00
Jason Short
7dd737ad90 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 
Conflicts:
	Tools/autotest/autotest.py
 2011-11-12 21:53:08 -08:00
Jason Short
bee53453d6 nav updates 2011-11-12 21:46:57 -08:00
Jason Short
ea57fad80c WP counting update 2011-11-12 21:46:03 -08:00
Jason Short
901e46334d updates to Mavlink for zero based WP counting 2011-11-12 21:44:38 -08:00
Jason Short
e1315b1ab8 Update and fix for Circle mode 
HIL updates for altitude
 2011-11-12 21:43:21 -08:00
Jason Short
bcfb3a0ee3 Fix for WP saving with CH7 2011-11-12 21:40:58 -08:00
Jason Short
d6bfae598f WIP: adding 255 to represent a completed mission 2011-11-12 21:40:33 -08:00
Jason Short
fd02ebca74 Work in progress for using 0 based counting 2011-11-12 21:39:24 -08:00
Jason Short
9e67c7efca Added additional nav params to reset 2011-11-12 21:39:00 -08:00
Michael Oborne
b3747ab10f fix loiter radius 2011-11-13 08:24:56 +08:00
Jason Short
be3edc19f8 Fixed type error in params 2011-11-12 15:15:33 -08:00
Jason Short
bb4e612241 Shortened test name 2011-11-12 15:14:32 -08:00
unknown
a7038cbaf9 TradHeli - new parameter HSV_MAN to allow better set-up from APMissionPlanner. Also changed swash movement to use radio_out which fixes some setup bugs 2011-11-12 23:23:07 +09:00
Jason Short
dd96b146b5 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-10 10:02:08 -08:00
Jason Short
3450e91039 Trying to break Nav to test a feature 2011-11-10 10:01:57 -08:00
Andrew Tridgell
2d204b727b fixed build error 
the prototype extractor was finding the commented out version of
cross_track_test(), which had a different prototype
 2011-11-10 22:01:09 +11:00
Jason Short
3f0b42f64f made crosstrack functions static 2011-11-09 23:30:16 -08:00
Jason Short
2c9ebf11b8 removed unused functions, log fix 2011-11-09 23:28:50 -08:00
Jason Short
d8361dfe67 renamed original_target_bearing 2011-11-09 23:04:04 -08:00
Jason Short
8ad94b9993 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-09 22:56:52 -08:00
Jason Short
ae1684a37c crosstrack angle variable 2011-11-09 22:56:38 -08:00
Jason Short
7259cf2180 Added in crosstrack correction - test for SIM 2011-11-09 22:56:09 -08:00
Andrew Tridgell
c056c4f0cb HIL: allow for fast HIL attitude update in HIL_MODE_ATTITUDE 
this runs it at the full loop rate
 2011-11-10 13:17:06 +11:00
Jason Short
6211cc4e50 back to original config for testing 2011-11-10 13:00:34 +11:00
Jason Short
6b26c32e9d Lowered Nav_P based on SIM data 2011-11-10 13:00:34 +11:00
Jason Short
fafa6e52e9 back to original config for testing 2011-11-09 13:53:26 -08:00
Jason Short
f994d16a48 Lowered Nav_P based on SIM data 2011-11-09 12:46:34 -08:00
Jason Short
6e3b3fd974 CTUN log update 2011-11-09 12:28:12 -08:00
Jason Short
3732b7db71 Added code notes 2011-11-09 12:07:15 -08:00
Jason Short
630f2dbf05 Code formatting 2011-11-09 12:06:55 -08:00
Jason Short
d6c0e34516 Tuning nav_WP 
Added more notes
 2011-11-09 12:06:37 -08:00
Jason Short
a8d622d8e6 Lowered Nav_P I term to ramp slower base on SIM 2011-11-09 11:30:50 -08:00
Jason Short
27d9bc92f3 Added more output to Mavlink for debugging 2011-11-09 11:00:40 -08:00
Jason Short
e5b37d9d89 Added MAV_CMD YAW parsing 2011-11-08 23:44:14 -08:00
Jason Short
7714f203f9 Added Mav_CMD_Yaw parsing 2011-11-08 23:42:41 -08:00
Andrew Tridgell
c158cb8e63 call gcs_update() while waiting for GPS lock 
this ensures we react to ground commands, and also allows HIL GPS to
work
 2011-11-09 17:43:55 +11:00
Jason Short
79e30b5f21 removed debugging code 2011-11-08 14:41:46 -08:00
Jason Short
d375de8424 SIM test 2011-11-08 14:11:02 -08:00
Jason Short
b29f4456c4 fix for SIM GPS 2011-11-08 14:10:09 -08:00
Andrew Tridgell
3b67321945 Log: try to fix -ve lat in logging 2011-11-09 08:46:05 +11:00
Jason Short
2dc2a2114a restoring throttle i term for SIM 2011-11-08 11:51:49 -08:00
Jason Short
90ee0f7e09 bad hijacking of GPS_Status 2011-11-08 10:48:47 -08:00
Jason Short
1ab1d8bab4 Fixes for Sim - Missing climb rate calculation 2011-11-08 10:46:52 -08:00
Jason Short
10bbfdbe11 PID test for alt hold to narrow down on a bug 2011-11-08 10:13:16 -08:00
Jason Short
c3d5d92a71 Updated Logs to be C++ compliant 2011-11-07 22:23:48 -08:00
Jason Short
69fec433e6 Update to RTL logic. 2011-11-07 21:30:12 -08:00
Jason Short
4afc3e9f17 Fix for bad RTL tracking in Autopilot 2011-11-07 21:09:29 -08:00
Andrew Tridgell
dc6fb484cd Log: fixed a few more casts 2011-11-08 11:59:30 +11:00
Andrew Tridgell
28634f51b7 ArduCopter: use specific sized data types in a lot of places 
this will make the Desktop build more consistent with the real AVR
build, and also with a future ARM build
 2011-11-08 11:05:36 +11:00
Jason Short
6bf0c32173 Removed some old debug prints from motors.pde 
added ability to not increment I term for traversals.
 2011-11-07 14:32:39 -08:00
Andrew Tridgell
3176d4ffc5 HIL: enable CTUN log message in ATTITUDE HIL 2011-11-08 07:58:35 +11:00
Andrew Tridgell
92471aead2 Log: better way to check for -1 long portably 2011-11-08 07:58:34 +11:00
Jason Short
0446cae242 Alt hold fix 2011-11-07 12:00:37 -08:00
Andrew Tridgell
2bd451b445 Log: make find_last_log_page() portable 
this makes it work with platforms with a larger 'long'
 2011-11-07 23:50:49 +11:00
Andrew Tridgell
ae1e1c940f Log: fixed a bug where we could index outside an array 
when we first start up, num_existing_logs may be zero
 2011-11-07 22:56:13 +11:00
Jason Short
3a37e7fe60 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-06 22:46:57 -08:00
Jason Short
a37fadbedb moved to 200hz update 
Zccel Z updates from Aurelio in attitude.pde
lowered baro_alt sanity check
moved user hooks to the medium 10hz loop.
 2011-11-06 22:46:39 -08:00
Jason Short
d1431f1070 default top_bottom ratio 1.0 2011-11-06 22:45:07 -08:00
Jason Short
3153257d37 default top_bottom ratio 1.0 2011-11-06 22:43:49 -08:00
Jason Short
4bb0bf96ae Y6 Motors now have top bottom ratio 2011-11-06 22:42:59 -08:00
unknown
9c59fdfdd6 AltHold - another correction to the manual boost. Hopefully properly transferring building up I terms to g.throttle_cruise 2011-11-06 19:06:13 +08:00
unknown
32057fb3c9 AltHold - made TradHeli code also use manual_boost 2011-11-06 18:25:13 +08:00
unknown
755cb4b201 Altitude hold bug fix - changed g.throttle_cruise to be updated to steal I term from correct controller 2011-11-06 17:47:24 +08:00
unknown
156b496bab TradHeli - small change to make throttle_cruise in terms of radio input instead of servo output 2011-11-06 17:40:17 +08:00
unknown
f1e626e3c1 TradHeli - changed deadzones for throttle to zero (and also reduced for yaw) 2011-11-06 17:37:59 +08:00
Jason Short
c265555b69 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-04 21:42:10 -07:00
Jason Short
c8304114a3 renamed some command variables to align with Arduplane 
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
 2011-11-04 21:41:51 -07:00
unknown
12f5f3f96e TradHeli - fix to allow tail servo to be reversed. Also increase max movement of tail servo to 45 degrees. 2011-11-05 12:31:30 +08:00
Jason Short
3f211121fe Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-01 21:18:56 -07:00
Jason Short
27fc6eea10 Z dampener 
Integrated Aurelio R. Ramos' Z dampening code.
 2011-11-01 21:18:47 -07:00
Andrew Tridgell
acc03753ab fixed HIL build 2011-11-02 08:14:07 +11:00
Jason Short
4f8ef25643 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-01 09:30:54 -07:00
Jason Short
1df9f8488d updated Alt hold PIDs 2011-11-01 09:30:34 -07:00
Jason Short
0a538baeb2 updated baro test 2011-11-01 09:29:55 -07:00
Jason Short
c32a707632 cleanup 2011-11-01 09:28:36 -07:00
Jason Short
c402311077 removed accel.z references 2011-11-01 09:28:23 -07:00
Jason Short
c6ed8ed0ea alt hold logging 2011-11-01 09:28:04 -07:00
Jason Short
fd9b16e787 resetting alt hold I 2011-11-01 09:27:49 -07:00
Jason Short
48db60a4eb Tweaks to alt hold 2011-11-01 09:25:23 -07:00
Jason Short
ab1de277dc altered the interactive throttle to be more aggressive and proportional. 
reworked baro reading strategy.
 2011-11-01 09:24:51 -07:00
Andrew Tridgell
56390c4696 GCS: fixed timeout loading waypoints (ArduCopter) 
prevents link saturation
 2011-10-31 21:25:58 +11:00
James Goppert
3f8603331d Switching to new eclipse project style. 2011-10-30 22:57:34 -04:00
James Goppert
8102b31d8d Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-29 15:09:35 -04:00
James Goppert
1a8c4a2597 Working on cmake support. 2011-10-29 15:01:05 -04:00
Jason Short
67e98ae867 Added additional NTUN logging entries. 2011-10-29 11:53:50 -07:00
unknown
c253996ea9 TradHeli - added TUNE value 13 to allow adjusting of external gyro gain using channel 6 2011-10-29 20:34:21 +09:00
unknown
ea66c74ff0 TradHeli - added throttle scaling and heli specific angle_boost function that takes into account that heli's main blades can have -ve pitch. 2011-10-29 17:27:43 +09:00
Jason Short
1238944573 logging type change in CTUN 2011-10-28 21:59:47 -07:00
Jason Short
842311dfcd Added save WP note to APM_Config.h 2011-10-28 21:46:31 -07:00
Jason Short
7266c5372a Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-28 21:29:18 -07:00
Jason Short
07daf34ccc Added a slew rate to the alt change rate. 
Added better reporting of throttle control
upped constraints for alt hold
Additional logging for CTUN lay hold
 2011-10-28 21:29:10 -07:00
Andrew Tridgell
1118d26f03 fixed "Free RAM" display on bootup 2011-10-28 21:34:10 +11:00
Jason Short
46590e5f28 Log updates 
Added motor logging for different frame types. Switched the PM log to some new debugging values and speed up the writing of the value to the logs.
 2011-10-27 22:36:25 -07:00
Jason Short
04b5776601 50 rev 
Work in progress, revved the EEPROM
 2011-10-27 12:42:28 -07:00
Jason Short
27d9712e80 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 
Conflicts:
	libraries/APM_PI/APM_PI.cpp
 2011-10-27 12:41:00 -07:00
Jason Short
2458fe078f Loiter updates 
Added new option to do rate based Loiter with lat and long values, avoiding GPS heading latency issues.
 2011-10-27 12:37:33 -07:00
Jason Short
d089059f58 Set default gain to 20 2011-10-27 12:33:44 -07:00
Jason Short
c8c26d8193 added boost scalar arguments 
removed accel math from Trig function into Attitude.pde
 2011-10-27 12:33:19 -07:00
Jason Short
c6c7966205 Attitude 
Made the Acro mode more NG like. Should be much more nimble!
Tweaked the Accel hold with sim tests. not flight tested or enabled by default.
added option to set scalar in angle boost
 2011-10-27 12:31:46 -07:00
Jason Short
0b4a3ccadb Acro PI defaults 2011-10-27 11:55:13 -07:00
Jason Short
dd23883097 Motor arming delays 
Speeding up delays for motor arming commands - Level and Inflight leveling.
 2011-10-27 11:54:46 -07:00
Jason Short
a076b45506 Added Acro Params 
Allows user's to fly separate PI loops settings for Acro
 2011-10-27 11:52:00 -07:00
Jason Short
d4e5281a4c Deafaut dead_zone call 
Sets the correct default values for the RC_Channel group for Quads.
 2011-10-27 11:35:02 -07:00
Jason Short
76bf784f8c RC_Channel Dead zone 
Added APVar dead_zone to the RC_Channel library so you could edit it in the Mission planner
Made CH filtering off by default.
 2011-10-27 11:34:00 -07:00
Andrew Tridgell
5a44298d57 CLI: enable "hit enter 3 times" support for CLI 
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
 2011-10-27 21:54:07 +11:00
Jani Hirvinen
a503d9a7a7 adding missing config parameters 2011-10-21 10:41:52 +07:00
Jani Hirvinen
f5f3fa8fb9 Adding second default PID sets for bigger motors 2011-10-21 10:38:36 +07:00
Jason Short
d551494b94 Added ability to dynamically set wp with toggle switch 2011-10-18 17:59:45 -07:00
Jason Short
a693bea7d9 added extra user hook 2011-10-17 23:51:47 -07:00
Jason Short
42d0b5cdb3 tweaked Alt hold PIDs, loiter PIDs based on SIM testing and feedback. 
Increased distance error for loiter for faster return to center.
 2011-10-16 15:41:54 -07:00
Jason Short
3bf36b5427 fix for Camera Roll 2011-10-15 20:45:45 -07:00
Jason Short
2f751793bc typoo in params for camera roll gain. fixed. 2011-10-15 18:34:23 -07:00
Jason Short
4c1d10a75e Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-15 16:35:09 -07:00
Jason Short
6a5aefd0ec Added gains to adjust travel of camera. 2011-10-15 16:34:57 -07:00
Michael Oborne
5c10b2af6c ac quick redo fix 2011-10-16 06:58:03 +08:00
Jason Short
4052fd4f73 Made wpspeed governor run per second so 1hz gps doesn't fail. Gave a 1m/s minimum. Increased WPspeed max to 4.0m/s 2011-10-15 15:35:18 -07:00
Jason Short
4be2776b17 Added Andrew's user hooks. 2011-10-15 15:29:33 -07:00
Jason Short
142707711e Updates to guided mode from Michael O. 
removed or commented unused static vars
 2011-10-15 13:09:04 -07:00
Jason Short
65f26f7138 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-13 10:55:17 -07:00
Jason Short
338396b76a slowed acceleration from WP 2011-10-13 10:54:51 -07:00
Michael Oborne
e85e3b87a8 AC2 fix guide mode fly off 2011-10-13 18:34:32 +08:00
Jason Short
2330006fbe logging for gyro and accell testing 2011-10-12 21:21:46 -07:00
Jason Short
9500171a46 tweak to the Loiter N turns 2011-10-12 20:59:12 -07:00
Jason Short
43b3015963 lowered DCM RP gains 
made Instant_PWM optional
upped PWM output to 400hz
 2011-10-11 22:20:23 -07:00
Amilcar Lucas
04299122d8 Spell 2011-10-11 22:52:02 +02:00
Andrew Tridgell
d11303ef78 removed an unused variable 2011-10-11 20:53:43 +11:00
Andrew Tridgell
97b3ced7aa fixed a signed/unsigned warning 2011-10-11 20:53:43 +11:00
Andrew Tridgell
eed26ae91a fixed a '=' vs '==' bug in do_loiter_turns() 2011-10-11 20:53:43 +11:00
Andrew Tridgell
d89ae696ef merged the GCS updates from ArduPlane to ArduCopter 
this removes all the non-MAVLink GCS options, and simplifies the HIL
and GCS code a lot. It also adds async sending of low priority GCS
text messages.
 2011-10-11 20:53:43 +11:00
Andrew Tridgell
ea82b27fe5 support building with common Makefile.desktop 2011-10-11 17:49:40 +11:00
Andrew Tridgell
0939b51a4c added build makefiles 2011-10-10 07:18:38 +11:00
Andrew Tridgell
5a71030d76 don't check the slider switch if CLI is disabled 
this prevents a build error in desktop mode
 2011-10-09 22:39:23 +11:00
Andrew Tridgell
c61fe55d76 don't initialise DataFlash if logging is disabled 2011-10-09 22:38:49 +11:00
Andrew Tridgell
01e5ae2ab9 use memcheck_available_memory() instead of freeRAM() 
this provides a more accurate view of memory
 2011-10-09 22:38:14 +11:00
Michael Oborne
d42f2e230e undo config change 2011-10-08 21:13:53 +08:00
Michael Oborne
a052c25899 Merge commit 'e7f5e4a623b79872a015dff5ca959e60f6f7fd64' 2011-10-08 20:43:13 +08:00
Jason Short
c25478448b Quick RTL Fix, logic was backward 2011-10-07 11:06:31 -07:00
Jason Short
167df79b49 Better Loiter PIDs 
Fixed RTL overshoot bug
 2011-10-06 17:42:09 -07:00
Michael Oborne
fab2121c6d fix ac2 hil build 2011-10-04 18:55:10 +08:00
Michael Oborne
f9883bf382 fix make issue 2011-10-04 09:34:47 +08:00
Jason Short
1ff372a41d Implementing a limiter for the ramp up of speed to WPs. 2011-10-03 10:37:56 -07:00
Jason Short
eb1117b136 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-02 11:36:31 -07:00
Jason Short
b0bd9d1c44 Added second PI loop for alt hold. 
Upped gains for default JDrones Frame
added gains for second PI loop for alt
removed some tests for 1280 space constraints
 2011-10-02 11:36:23 -07:00
Amilcar Lucas
ee4251baef Fix compilation 2011-10-02 14:52:02 +02:00
Amilcar Lucas
3d1902abac Use the new AP_Relay library 2011-10-02 14:22:27 +02:00
Jason Short
189fc194b6 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-30 18:40:40 -07:00
Jason Short
f89da12387 Minimized the accel_filtered vector to be faster and more accurate. 
Made the Filter include the Accels and moved from 8 to 4 terms in the filter
 2011-09-30 18:40:29 -07:00
James Goppert
e20c279ca5 Added makefiles for ArduCopter/ArduPlane. 
These files are not generated by cmake. They are necessary for
the make based build to work. To build using this method
type make in the directoy such as ArudPlane/ArduCopter. Make
sure that you do not call cmake in the ArduPlane etc directory
as this will overwrite this Makefile with the autogenerated cmake
version. Cmake should be called from withing a build directory.
 2011-09-30 07:16:48 -04:00
Janne M
b4e56e889f ArduCopter: Fixed board setting in cmake-file. Removed now autogenerated Makefile 2011-09-30 11:30:43 +03:00
Jason Short
12cd4539a3 2.0.46 preliminary release 2011-09-29 23:30:32 -07:00
Jason Short
a7ea200407 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-29 23:27:36 -07:00
Jason Short
de61e87128 Added ADC gyro Filtering for quads - this fixes a noise issue introduced into the controller 
added Position mode
removed
Added back in the accelerometer experiment
Added filter_result boolean to enable filter on the fly
 2011-09-29 23:27:23 -07:00
James Goppert
5489b84f8e Improvements to cmake. 2011-09-29 21:23:26 -04:00
James Goppert
dafaa1fa0b Merge branch 'apo' 
Conflicts:
	ArduBoat/ArduBoat.pde
	ArduBoat/CMakeLists.txt
	ArduRover/ArduRover.pde
	ArduRover/CMakeLists.txt
	apo/CMakeLists.txt
	apo/apo.pde
 2011-09-29 14:22:55 -04:00
James Goppert
d887a28b91 Added ArduBoat/ ArduRover/ and APO library. 2011-09-29 14:12:15 -04:00
Jason Short
758d0e1aec Attempting to mimic loiter values for 4.0.42 
lowered Rate Error max in loiter
 2011-09-28 23:11:19 -07:00
Jason Short
c881600385 lowered the deadzone a tad 2011-09-27 13:56:02 -07:00
Jason Short
888e1119e8 Added Loiter P tuning as #12 2011-09-27 09:39:32 -07:00
Jason Short
c209d6e6dd 2.0.46 -Not flight tested! 
restored 42 alt hold code
removed throttle timer, replaced with safer constant
increased alt control range
reformatted nav_rate calls
removed unused simple mode defines
set alt hold home to 10m
tuned down rateP to .13 from .14 for broader application.
 2011-09-27 09:35:05 -07:00
Jason Short
326cfef808 Dead Zone fix - Now the range is full instead of clipped. Should make the Yaw much more smooth. 2011-09-26 22:12:39 -07:00
Michael Oborne
d8fd3eadfd heli config 2011-09-27 07:36:12 +08:00
Michael Oborne
b33eaa8c9c heli hil config 2011-09-27 07:34:32 +08:00
Michael Oborne
108a89f617 heli hil 2011-09-27 07:30:28 +08:00
Jason Short
0ed9af1bf5 Turned off Rate_I for Arduino users. 2011-09-25 15:34:59 -07:00
Jason Short
b2a2221474 Fixed issue with Simple mode changes. 
Reverted to simpler, safer timer code for throttle hold
 2011-09-25 14:16:35 -07:00
Jason Short
f437e4b2d1 Revved the firmware to force resetting the EERPOM 2011-09-25 12:24:02 -07:00
Jason Short
706211b757 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-25 12:22:07 -07:00
Jason Short
239164fa19 Fixed Flip code to compile. Flip still not flight tested! 2011-09-25 12:21:54 -07:00
rmackay9
bd79e1f73c Merge remote-tracking branch 'origin/master' 2011-09-25 16:55:52 +09:00
rmackay9
b5ea05698e TradHeli - added servo averaging to allow support of analog servos 
- moved heli parameters to 80 because they were causing flight modes to overlap with waypoints
 2011-09-25 16:51:25 +09:00
Jason Short
bb8f97ec0b Better throttle boost value 2011-09-24 21:55:54 -07:00
Jason Short
d262fdb264 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-24 21:50:08 -07:00
Jason Short
d495e6a9c4 turned off Stabilize_I by default because it was hurting loiter 
tweaked speed control of rate_nav
 2011-09-24 21:49:45 -07:00
rmackay9
ddb4de1949 TradHeli - fix to set motor_auto_armed = true if throttle > 0. Required to let ALT_HOLD work! 2011-09-25 12:30:37 +09:00
Jason Short
236f665378 Added Loiter Turns - It orbits the Current location 
Added WP to Loiter_time so you can spec a specific location in the planner
added new Navigation alg. Should perform better (doesn't rely on 45° flow fields like last one)
Added "Jump" counter so missions don't get overwritten in flight.
removed I term by default for Rate pitch and roll
 2011-09-24 17:40:29 -07:00
Jason Short
35c30e91bf Test for new nav function 2011-09-24 16:48:04 -07:00
Jason Short
e961d3f3d4 Removed default Rate_I for pitch and roll 
added change speed control for missions
 2011-09-24 09:49:11 -07:00
Amilcar Lucas
e5c248e2bf Moved mavlink_check_target() to the libraries/. 
This allows it to be reused by the other libraries and by other projects ArduPlane, ArduCopter, ArduRover ... etc.
It also reduces code duplication
 2011-09-24 14:40:07 +02:00
Jason Short
a8befb189c Fixed throttle_boost 2011-09-23 15:34:18 -07:00
Jason Short
2ae163ef75 Trying to make Alt hold more aggressively change altitudes. 2011-09-23 13:58:39 -07:00
Jason Short
ba7abd62d8 Adjusted DCM Gains to normal levels. Added a check to stop navigating when landing and to land faster. 2011-09-23 13:52:10 -07:00
Jason Short
25b0a3c43b Added a default, but low throttle cruise value 
Added a clear integrator for Rate I to prevent tip ups at launch.
 2011-09-22 23:10:55 -07:00
Jason Short
7177bcec77 removed old CH6 tuning defines 2011-09-22 18:51:41 -07:00
Jason Short
cfd2c31fb2 Better Tuning for default Quad 2011-09-22 18:30:29 -07:00
Jason Short
991279851a Refined Throttle Timer reset 
Reduced Loiter I gain to decrease overshoot.
 2011-09-22 17:38:39 -07:00
Jason Short
f49621bde1 Fixed for sticky RTL CH7 option 2011-09-22 15:25:07 -07:00
Jason Short
078f64e276 Fixed Throttle integrator bug. Time was not being reset causing a big drop in throttle control. 2011-09-22 12:28:46 -07:00
Jason Short
a012e7981a removed debug statements 2011-09-21 22:34:27 -07:00
Jason Short
c91ad14e18 Fixed Timer overflow for throttle PI loop. 
Moved look at home to update_nav where it belongs
 2011-09-21 22:31:12 -07:00
Jason Short
0fba3e6742 Added Auto_trim to CH7 option 2011-09-21 16:24:09 -07:00
Jason Short
5ca50f1f01 Altered CIRCLE mode to allow Loiter_N_Turns to work in AP mode. 2011-09-21 13:19:36 -07:00
Jason Short
2a6d2dea5c upped to 2.0.44 - not flight tested 2011-09-20 23:23:42 -07:00
Jason Short
00fe8e0450 Fixed do_flip, 2011-09-20 23:20:33 -07:00
Jason Short
94313ea88f Fixed Yaw for Auto mode. 2011-09-20 22:59:23 -07:00
Jason Short
c143e08d2e Logic fix for RTL option 2011-09-20 10:39:39 -07:00
Jason Short
020062498b Edited CH7 options to include Do Nothing and RTL. 2011-09-20 10:37:50 -07:00
Jason Short
b2b28cc90c Converted Millis to Micros 
added navigation check to return a failed navigation
 2011-09-19 22:24:57 -07:00
Jason Short
bf94ba551e changed PI Library to take Float for DeltaTime 
Changed timing to be more accurate in main loop. Still need to switch to micros(). Left that for Tridge. This gets rid of six floating point calcs *250. Nice!
 2011-09-19 14:02:42 -07:00
Jason Short
6dd2cc058a removed outdated reference file. 2011-09-18 17:18:35 -07:00
Jason Short
b9b5c57662 added contributor 2011-09-18 17:12:59 -07:00
Jason Short
73fd0084be Added Piezo Support, code from Oliver. 2011-09-18 17:12:28 -07:00
Jason Short
ddc5ced162 removed saving - not needed for copters 2011-09-18 16:28:53 -07:00
Jason Short
151cae6074 Jump command was reported to have issues, updated to match APM branch. 2011-09-18 16:27:43 -07:00
Amilcar Lucas
2755748d44 Added comment, spellcheck 
This reduces the diff to the APM_Camera branch
 2011-09-18 14:57:55 +02:00
Andrew Tridgell
dc23ad4275 MAVLink: merged in the stack saving changes from ArduPlane 2011-09-18 11:37:24 +10:00
Jason Short
2f961ad315 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-17 12:23:22 -07:00
Jason Short
99065d5035 Added a GPS watchdog to stop navigating if we loose signal. 2011-09-17 12:23:16 -07:00
Amilcar Lucas
1dca64f190 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-17 20:25:49 +02:00
Amilcar Lucas
227ce0a92d Merge some small misc improvements from APM_Camera branch 2011-09-17 20:25:31 +02:00
Jason Short
0b701f7351 Reverted to current_loc.alt in MSG_VFR_HUD and MSG_Location 2011-09-17 11:16:13 -07:00
rmackay9
c825e76a88 ArduCopter - small changes to fix compile errors when optical flow enabled 2011-09-17 22:09:18 +09:00
Andrew Tridgell
d4a068416f fixed bit-logic for simple modes 2011-09-17 14:58:02 +10:00
Andrew Tridgell
3c69404d5b fixed build of OpticalFlow code 2011-09-17 14:58:02 +10:00
Andrew Tridgell
0425f4be54 updates for new DCM code 
G_Dt is no longer needed by the DCM
 2011-09-17 14:58:02 +10:00
Jason Short
4607bdb4b5 fixed naming for opt flow 2011-09-16 19:26:17 -07:00
Jason Short
f79b8de5e8 removed DCM reference from OPT FLOW 2011-09-16 19:17:50 -07:00
Jason Short
cd72e6bea9 roughed in an expo option idea 
made min and max values 1100, 1900
removed hard coded init for camera values
 2011-09-16 19:06:53 -07:00
Jason Short
1689a9857c removed unused pde file 2011-09-16 18:57:35 -07:00
Jason Short
9c5cba56eb Added low voltage code flashing code. 2011-09-16 18:56:51 -07:00
Jason Short
9bcbe70e59 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-16 18:35:14 -07:00
Jason Short
b948e0f02b Lowered Loiter_I - higher value didn't test well. 2011-09-16 18:24:42 -07:00
Jason Short
129c13e065 Fixed CIRCLE mode trig error 
made loiter_radius * 100 in Params
updated gains
 2011-09-16 16:54:45 -07:00
Jason Short
8d0a2fae9b cleanup 
added more ifdef for optflow
 2011-09-15 23:41:15 -07:00
Jason Short
d29cfbcee3 Integration of optical flow 
bug fixes for new Simple mode
increased Baro filter by 2 fields
 2011-09-15 23:33:00 -07:00
Michael Oborne
e43b711e96 fix remote error value 2011-09-15 18:26:59 +08:00
Jason Short
1025fc3abf Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-14 14:45:13 -07:00
Jason Short
1ce2308d11 Removed Simple Mode 
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
 2011-09-14 13:58:18 -07:00
unknown
a4e001bbcf Adding CMake support 2011-09-14 15:44:55 +02:00
Jason Short
fdc56c9ad5 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-12 12:57:56 -07:00
Jason Short
ecd14f4425 Cleaned up guided mode 
Reduced ADC filter to 3 from 6 to increase speed of filter.
 2011-09-12 12:57:36 -07:00
Amilcar Lucas
d1a63db767 These defines got moved to the library 2011-09-12 21:32:05 +02:00
Jason Short
a6182965c1 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-11 21:46:53 -07:00
Jason Short
885ec18182 Removed last of Xtrack 2011-09-11 20:40:05 -07:00
Jason Short
bae05178f0 removed Xtrack and increased rate error limit 2011-09-11 20:36:20 -07:00
Jason Short
285029856b removed nav_bearing 2011-09-11 20:33:29 -07:00
Jason Short
5f94aa1d40 removed Nav_bearing 2011-09-11 20:32:58 -07:00
Jason Short
c15b6be83f increased imax 2011-09-11 20:28:43 -07:00
Jason Short
466488e78d removed nav_bearing - not used 2011-09-11 20:27:56 -07:00
Olivier ADLER
b9383537e2 Added missing motor tests for octa quad and octa V 2011-09-12 00:43:54 +02:00
Olivier ADLER
1ee65e3ef2 Merge branch 'APM_Camera' of https://code.google.com/p/ardupilot-mega/ 
Conflicts:
	ArduPlane/ArduPlane.pde
	libraries/AP_Camera/AP_Camera.h
	libraries/AP_Mount/AP_Mount.cpp
	libraries/AP_Mount/AP_Mount.h
 2011-09-12 00:31:18 +02:00
Olivier ADLER
8b3e9d2df6 Signed-off-by: Olivier ADLER <contact2@nerim.net> 
slightly upped motor out values for motor test. Was too low for some ESCs.
 2011-09-11 23:32:04 +02:00
Jason Short
d733868fea Fixed Yaw mode for CIRCLE 2011-09-11 11:48:11 -07:00
Jason Short
e6b7c57d26 Circle Mode now working 
250Hz loop implemented
 2011-09-11 11:22:01 -07:00
Jason Short
482844b87a Added Input Voltage value to params 2011-09-10 18:44:56 -07:00
Jason Short
b4a51806bc Added Nav Rate tuning 2011-09-10 18:37:28 -07:00
Jason Short
bb1b7b47a7 Fixed numbering issue with defines 2011-09-10 16:25:52 -07:00
Jason Short
97d69906dd Incremented to 2.0.41 2011-09-10 15:28:55 -07:00
Jason Short
02bfd43390 Fixes Alt hold mistake 
Moves tuning into runtime definable param
Added more IMax to throttle

Signed-off-by: Jason Short <jasonshort@gmail.com>
 2011-09-10 15:16:51 -07:00
Chris Anderson
59b5bafdd1 Renamed code to ArduCopter 2011-09-08 19:14:12 -07:00
jasonshort
8870e2f309 circle mode patch 2011-09-09 11:59:42 +10:00
Andrew Tridgell
ec398505a6 rename main pde file for arduino requirements 2011-09-09 11:52:25 +10:00
Andrew Tridgell
b9fad1262a move Frame into ArduCopter 2011-09-09 11:52:15 +10:00
Andrew Tridgell
d95e454609 rename main pde file for arduino requirements 2011-09-09 11:51:21 +10:00
Andrew Tridgell
afe0fa18ea move Frame into ArduCopter 2011-09-09 11:49:11 +10:00
Andrew Tridgell
1456a2a912 renamed top level directories 
ArduCopterMega -> ArduCopter
added archives directory for old code
 2011-09-09 11:27:41 +10:00