Commit Graph

6778 Commits

Author SHA1 Message Date
Craig@3DR 8cfefbc275 Updated rev number in driver 2013-01-02 09:22:21 +11:00
rmackay9 5ba363b007 ArduCopter: move gcs_check function (which sends to ground station) to run when 50hz loop is not running
Also removed redundant heartbeat message
2013-01-02 09:21:35 +11:00
rmackay9 b8b17a4a70 ArduCopter: added AP_PerfMon library 2013-01-02 09:20:08 +11:00
rmackay9 331a73c4ac ArduCopter: remove duplicate (?) send of MSG_EXTENDED_STATUS1 2013-01-02 09:20:08 +11:00
rmackay9 6baddf4aee ArduCopter: remove unused variable last_5hz 2013-01-02 09:20:08 +11:00
rmackay9 1f5fdcdaa8 ArduCopter: remove unnecessary "Initialising APM message..." 2013-01-02 09:20:08 +11:00
Jason Short 8b62c4630b ACM: Restore Multi-mode support 2013-01-02 09:20:08 +11:00
rmackay9 bd0e018ca0 ArduCopter: restore auto-trim method but now use AHRS.add_trim 2013-01-02 09:20:08 +11:00
Craig@3DR e350bfbba8 Removed 2 more degree symbols from comments 2013-01-02 09:20:08 +11:00
rmackay9 b786cf40f7 ArduCopter: change GPS dataflash message to output unfiltered gps lat and lon 2013-01-02 09:19:39 +11:00
rmackay9 37b56662bd AP_InertialNav: Jason's bug fix to inertial nav velocity and position calculations 2013-01-02 09:19:39 +11:00
rmackay9 d3cbf733ba ArduCopter: ensure RTL performs a land if a failsafe has been triggered 2013-01-02 09:19:39 +11:00
Robert Lefebvre 6e64b1b357 ACM: Precision Loiter RePositioning code.
Protected behind a #define
2013-01-02 09:19:39 +11:00
rmackay9 120b494d83 Filter: #include AP_Buffer.h no longer needed now that completementary filter has been moved to InertialNav library 2013-01-02 09:19:39 +11:00
rmackay9 0fa6fdf407 ArduCopter: remove unused wait_for_yes function 2013-01-02 09:19:39 +11:00
rmackay9 e6519330f4 ArduCopter: remove unused rc_override variables to save 21 bytes 2013-01-02 09:19:17 +11:00
rmackay9 396024e802 ArduCopter: move scaleLongUp and scaleLongDown initialisation to init_home 2013-01-02 09:19:17 +11:00
rmackay9 7a5e4b8549 ArduCopter: stop unnecessary updates of target altitude and knock-on effect of too many EV message in dataflash log 2013-01-02 09:19:17 +11:00
rmackay9 1b5ff6aac6 ArduCopter: restore initial climb to RTL 2013-01-02 09:19:17 +11:00
rmackay9 52802cb29e ArduCopter: limit output throttle to 800 only for TRI which does not have the new stability patch 2013-01-02 09:19:17 +11:00
rmackay9 3aca61cefb AP_Motors: remove unnecessary opposite_motor array (no longer needed with new stability patch) 2013-01-02 09:19:17 +11:00
rmackay9 34e18ae12a ArduCopter: increase accel based throttle PIDs and add D term to rate based throttle 2013-01-02 09:19:17 +11:00
rmackay9 41cc1c74d8 AP_InertialNav: increase time constant for Z axis to 7 seconds 2013-01-02 09:19:17 +11:00
rmackay9 ac8af9a53f ArduCopter: Leonard Hall's changes to alt hold including adding low pass filter to climb rate
get_throttle_rate_stabilized changed to simply update the target altitude instead of talking directly to the rate controller.
get_throttle_althold changed to use sqrt of distance when calculating the desired rate towards the target altitude.
added reset of accel based throttle PID's I term.
unrelated small bug fix from Randy to allow CH6 tuning of throttle rate D term.
2013-01-02 09:19:17 +11:00
rmackay9 a76aec675a AP_InertialSensor: resolved compile warning re uninitialised variable 2013-01-02 09:18:03 +11:00
rmackay9 90d7f00965 AP_GPS_MTK16: saved 22 bytes of ram by moving error message into program space.
Perhaps there's no point in writing an error message to a console that likely nobody will be viewing anyway.
2013-01-02 09:18:03 +11:00
rmackay9 811550cca6 AP_GPS_MTK19: small bug fix re "==" vs "="
Also saved 22 bytes of RAM by moving error message into program space.
2013-01-02 09:16:48 +11:00
rmackay9 f4c50353b9 ArduCopter: allow tuning of the Throttle Rate D term 2013-01-02 09:16:48 +11:00
Craig@3DR f778961acf Added support for Mediatek firmware Rev 1.9 2013-01-02 09:16:47 +11:00
Robert Lefebvre 9605bd8ee1 ACM: Trying to set a default MPU6K filter rate of 10Hz for TradHeli. Doesn't Work. 2013-01-02 09:14:55 +11:00
rmackay9 d926360e81 ArduCopter: move gcs updates to run only when there are 4ms of spare time before the next 100hz iteration starts 2013-01-02 09:14:31 +11:00
rmackay9 881dae1e27 ArduCopter: remove throttle limit of 800 for quads, hexas and octacopters
Note: Y6 and OctaQuads still have the 800 limit because they do not have the latest stability patch
2013-01-02 09:13:42 +11:00
rmackay9 6da68c53a5 ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled 2013-01-02 09:13:42 +11:00
rmackay9 d8e3d5c10c ArduCopter: allow RTL's yaw mode to be overridden with a #define in APM_Config.h 2013-01-02 09:12:40 +11:00
rmackay9 557f4e65de AP_InertialNav: small performance improvement by replacing mul_transpose with direct multiplication of Z axis accel correction to specific elements of dcm 2013-01-02 09:12:40 +11:00
rmackay9 5633164fa0 ArduCopter: bug fix for compass.accumulate check in main loop (millis vs micros issue) 2013-01-02 09:12:40 +11:00
rmackay9 50d46898fb ArduCopter: allow GUIDED mode roll-pitch, yaw and throttle control modes to be overridden 2013-01-02 09:12:17 +11:00
rmackay9 ddc578fd18 ArduCopter: restore YAW to default AUTO_YAW mode instead of YAW_LOOK_AT_NEXT_WP mode 2013-01-02 09:12:17 +11:00
rmackay9 1f7614929f AP_AHRS: save trim to eeprom when set_trim is called 2013-01-02 09:12:17 +11:00
rmackay9 0ab82f8c4e ArduCopter: clear ahrs roll and pitch trims after an accel level command 2013-01-02 09:12:17 +11:00
rmackay9 7ea34d4fb7 ArduCopter: updated accel based throttle to use ahrs's get_accel_ef method
Also removed slow low pass filter meant to correct for accelerometer calibration.  This is no longer required now that we have the improved calibration method.
2013-01-02 09:11:25 +11:00
rmackay9 e9fa5dec0f AP_InertialNav: make use of ahrs library's get_accel_ef method to save some cpu cycles 2013-01-02 09:11:25 +11:00
rmackay9 1c08f176ea AP_AHRS: add get_accel_ef method to return earth frame accelerometer values for use in ArduCopter's inertial nav and accel based throttle 2013-01-02 09:11:25 +11:00
rmackay9 4dfe3a2d73 ArduCopter: remove weird character from navigation.pde 2013-01-02 09:11:25 +11:00
Robert Lefebvre ab95f04a91 ACM: TradHeli
Change name of attitude rate feed-forward parameters.
2013-01-02 09:10:40 +11:00
rmackay9 8e032b89ee ArduCopter: create 2.9 branch and update firmware version 2013-01-02 09:10:40 +11:00
Andrew Tridgell 18581d0220 HAL_AVR: change order of CS pin init - fixes APM2 boot problem
We now init the MPU6k CS pin before the MS5611 CS pin. This should not
matter at all, but it turns out that it solves the APM2 boot
problem. We should investigate why, as this may indicate an electrical
problem.

Pair-Programmed-With: Pat Hickey
2013-01-02 08:55:47 +11:00
Andrew Tridgell 57bf6531b4 Progmem: use right CONFIG_HAL_BOARD #ifdefs 2013-01-01 18:26:12 +11:00
Andrew Tridgell da10e68e87 HAL_PX4: added basic console driver (output only) 2013-01-01 18:19:18 +11:00
Andrew Tridgell 0ef003a45f AP_HAL: added PX4 board support 2012-12-30 20:02:45 +11:00