Randy Mackay
73e7e64bb8
AP_Arming: remove unused set_skip_gyro_cal
2015-09-21 17:06:29 +09:00
Randy Mackay
87cada1d54
Scheduler: remove INS start style from example sketch
2015-09-21 17:06:25 +09:00
Randy Mackay
b5e1ad89b3
AHRS: remove INS start style from example sketch
2015-09-21 17:06:23 +09:00
Randy Mackay
ada26082ca
InertialSensor: remove INS start style from example sketch
2015-09-21 17:06:20 +09:00
Randy Mackay
ec82aa68c4
InertialSensor: add GYR_CAL to control when gyro calibration occurs
2015-09-21 17:06:16 +09:00
mirkix
038ad31f81
AP_HAL_FLYMAPLE: Add support for using SPI devices of the same type.
2015-09-18 09:15:09 +10:00
mirkix
07d50b5fbb
AP_HAL_Empty: Add support for using SPI devices of the same type.
2015-09-18 09:15:09 +10:00
mirkix
f48bdc281f
AP_HAL: Add support for using SPI devices of the same type.
2015-09-18 09:15:09 +10:00
mirkix
93941c3349
AP_HAL_Linux: Add support for using SPI devices of the same type.
2015-09-18 09:15:09 +10:00
Peter Barker
8f1471c137
DataFlash: leave room in buffer for non-startup messages
2015-09-18 09:13:45 +10:00
Peter Barker
63a45000b4
DataFlash: take log messages after putting FMTs out
2015-09-18 09:13:45 +10:00
raspilot
1b5e6849d9
AP_Compass: fix milligauss code in LSM303D driver
2015-09-16 16:52:17 +09:00
Randy Mackay
ce6fe0e746
AP_RSSI: add enabled method
2015-09-16 16:41:41 +09:00
Randy Mackay
f633733b3b
AP_RSSI: make parameters private
2015-09-16 16:41:38 +09:00
Randy Mackay
9a648117a7
AP_RSSI: use is_zero and add break for avoid compile warning
2015-09-16 16:41:36 +09:00
Randy Mackay
1369179046
AP_RSSI: formatting fixes
2015-09-16 16:41:33 +09:00
Stewart Loving-Gibbard
4dcf6b8dc3
DataFlash: Adding Logging of RSSI data.
2015-09-16 16:41:31 +09:00
Paul Riseborough
8cfde42e15
AP_NavEKF: Ensure bad mag data cannot cause the heading to reset too often
2015-09-16 15:13:37 +09:00
Paul Riseborough
930f730612
AP_NavEKF: Reset mag and heading states to try and pass pre-flight checks
2015-09-16 15:13:36 +09:00
Randy Mackay
fff5ec09eb
AP_Compass: fix consistent check for less than three compasses
...
Also use vector functions where available
Use get_field_milligause instead of just get_field
2015-09-16 15:11:01 +09:00
Jonathan Challinger
87bbf1a487
AP_Compass: add consistent() function
2015-09-16 15:10:27 +09:00
Randy Mackay
39340e70f8
Math: add Vector2 is_zero method
2015-09-16 15:10:25 +09:00
Andrew Tridgell
094b9cb35e
AP_TECS: reformat using astyle
2015-09-16 14:24:45 +10:00
Andrew Tridgell
36432e6515
AP_TECS: use climb rate filter consistently between DCM and EKF
...
we should use baro height not hgt_afe for the climb rate filter. This
makes the climb rate consistent with the one from the EKF. The lidar
correction comes in with the demanded height, not the observed height
2015-09-16 14:24:44 +10:00
Randy Mackay
bc06d67645
AP_Camera: fix configure command id sent to components
...
Also removed unnecessary setting of target system, component and
confirmation and minor formatting fix
2015-09-16 13:06:46 +09:00
squilter
8391764c60
AP_Camera: add support for do_digicam_x via command_long
2015-09-16 13:06:44 +09:00
Grant Morphett
b2751d876c
AP_AHRS: Fixed spelling error in parameter desc.
2015-09-16 09:33:30 +09:00
Grant Morphett
417188d7eb
APM_Control: Fixed spelling error in parameter desc.
2015-09-16 09:33:27 +09:00
Julien BERAUD
5602e4055b
AP_Compass_AK8963: Fix Rotation on the Bebop
2015-09-15 14:45:17 +09:00
Andrew Tridgell
fa9ff5b604
AP_Compass: added parameter for compass calibration fitness threshold
2015-09-14 17:01:14 +10:00
Andrew Tridgell
eea54c9e09
DataFlash: fixed flymaple build
2015-09-14 16:44:45 +10:00
Andrew Tridgell
5aa54be718
GCS_MAVLink: send SCALED_PRESSURE3 for 3 baros
2015-09-14 14:27:42 +10:00
Andrew Tridgell
afe1fce94e
GCS_MAVLink: regenerate headers
2015-09-14 14:27:42 +10:00
Andrew Tridgell
91623322f9
GCS_MAVLink: added SCALED_PRESSURE3
2015-09-14 14:27:41 +10:00
Andrew Tridgell
a5462fec0b
AP_Baro: allow selection of primary barometer and add 3rd baro
...
this is useful for external I2C barometers on a PH2
2015-09-14 14:27:41 +10:00
Andrew Tridgell
61441ab35d
HAL_Linux: fixed apm2 build
2015-09-14 14:22:16 +10:00
Andrew Tridgell
bf001f19ff
HAL_Linux: don't panic on runtime failures
2015-09-14 14:22:16 +10:00
Andrew Tridgell
582318448f
AP_HAL: make new GPIO functions optional
...
not available on all boards
2015-09-14 14:22:16 +10:00
Andrew Tridgell
e0db1ad93e
AP_Notify: added support for raspilot LED
2015-09-14 14:22:16 +10:00
raspilot
9f91eb020e
AP_HAL_Linux: new files for raspilot
2015-09-14 14:22:16 +10:00
raspilot
30a2fe0857
AP_HAL_Linux: added scheduler hooks for raspilot
2015-09-14 14:22:16 +10:00
raspilot
25cddbcbaa
AP_HAL_Linux: added SPI support for raspilot
2015-09-14 14:22:16 +10:00
raspilot
7d329205ec
AP_HAL_Linux: added tonealarm support for raspilot
2015-09-14 14:22:16 +10:00
raspilot
a6736d8e61
AP_HAL_Linux: fixed ublox debug message
2015-09-14 14:22:16 +10:00
raspilot
444081d38d
AP_HAL_Linux: added support for raspilot objects
2015-09-14 14:22:16 +10:00
raspilot
f057fe3d02
AP_HAL_Linux: added support for raspilot GPIO
2015-09-14 14:22:15 +10:00
raspilot
9a73df1bea
AP_HAL_Linux: added support for raspilot RCInput
2015-09-14 14:22:15 +10:00
raspilot
1421cf600a
AP_InertialSensor: added support for raspilot
2015-09-14 14:22:15 +10:00
Lucas De Marchi
309e75f9ac
AP_Compass: LSM303D: use c++11 initializer to avoid Wreorder
2015-09-14 14:22:15 +10:00
Lucas De Marchi
3a017c8702
AP_Compass: LSM303D: rename members to follow convention
...
Make the members have similar names as HMC5843 driver and prepend
underscore on private fields.
2015-09-14 14:22:15 +10:00
