Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-09 09:28:31 -04:00
Code Issues Packages Projects Releases Wiki Activity
14,141 Commits 71 Branches 510 Tags 774 MiB
70c779dbc2
Commit Graph

14141 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Jonathan Challinger
cc955b738b AP_NavEKF: Clean up flight detector logic 2014-11-14 10:34:49 +11:00
priseborough
5359da9c68 AP_NavEKF : Improved Magnetometer Error Handling 
(Plane Only) If the yaw and GPS heading disagree by more than 45 degrees on takeoff, then the magnetometer is declared as failed. The heading is then reset based on the difference between GPS ground track and stgate velocity vector.
Magnetometer fusion uses corrected data and bias states are initialised to zero. This allows the compass to be switched in flight.
For persistent compass errors that trigger a timeout, the compass is not permanently failed, however for non-forward fly vehicles the compass weighting is reduced.
 2014-11-14 10:34:48 +11:00
Staroselskii Georgii
a55db1c25d AP_HAL_Linux: fixed LinuxGPIO_RPI::read() 2014-11-14 10:28:34 +11:00
Mikhail Avkhimenia
49d3035ee5 HAL_Linux: fix types, remove printfs in GPIO_RPI 2014-11-14 10:28:34 +11:00
Mikhail Avkhimenia
6f993fe64a HAL_Linux: add prototype RCInput code for Navio 2014-11-14 10:28:34 +11:00
Staroselskii Georgii
ef420a2544 AP_HAL_Linux: changed SPI mode for MPU9250 2014-11-14 10:28:34 +11:00
Staroselskii Georgii
bf860ee41f AP_HAL_Linux: Ublox SPI stub 2014-11-14 10:28:34 +11:00
Víctor Mayoral Vilches
ce4c4c43dc AP_HAL_Linux: Scheduler reboot fix 
exit from the autpilot when reboot is commanded.
The software assumes that the code is being
launched in an infinite loop thereby an exit
will make it reboot.
 2014-11-14 10:27:19 +11:00
Andrew Tridgell
ce4da9b09c autotest: raise timeout again 2014-11-14 10:26:18 +11:00
John Williams
b1c6931ade Build: added zynq make target 2014-11-14 10:21:05 +11:00
John Williams
ae87399919 HAL_Linux: Basic Zynq Linux platform support 
Preliminary support for Zynq/Linux on the 'ZyboPilot' HW platform.

see https://github.com/trjw/ZyboPilot-bsp for the PetaLinux / Vivado project
files.

At this stage CPPM/Pulse in and PWM out work, and in CLI mode the passthru
test works correctly.

The platform has passed minimal smoke testing in HIL mode.

ZYNQ IS NOT FLIGHT TESTED YET!  FLY THIS PLATFORM AT YOUR OWN RISK!

Signed-off-by: John Williams <john@whelanwilliams.net>
 2014-11-14 10:21:04 +11:00
Andrew Tridgell
adcf994356 AP_HAL: added Zynq platform type 2014-11-14 10:21:04 +11:00
Staroselskii Georgii
7f00dd413f AP_Compass: fixed HMC5883's initialisation code 2014-11-14 10:21:04 +11:00
Craig Elder
f7d0a930c2 Copter: Updated GCS_FAILSAFE Parameter Description 2014-11-13 13:10:06 -08:00
Dario Lindo Andres
18e4747a6f Added name to GIT_Success.txt 2014-11-13 10:55:58 -08:00
Andrew Tridgell
3b6c732b3b APM_Control: changed default I gain for roll/pitch controllers to non-zero 
too many people are still not tuning. At least this will give them a
chance to get their aircraft back in a cross-wind
 2014-11-13 22:13:25 +11:00
Andrew Tridgell
0d7ec0fbfe autotest: fixed buildlogs location for *.BIN 2014-11-13 21:52:48 +11:00
Andrew Tridgell
7f5cc97769 Plane: changed for new AP_Airspeed API 2014-11-13 21:12:59 +11:00
Andrew Tridgell
258542b939 AP_Airspeed: added ARSPD_SKIP_CAL parameter 
allows airspeed calibration to be skipped for easier startup
 2014-11-13 21:12:37 +11:00
Andrew Tridgell
fa5bab2682 Plane: log raw pressure and offset 2014-11-13 17:49:14 +11:00
Andrew Tridgell
9c631944f7 AP_Airspeed: expose raw pressure for logging 2014-11-13 17:49:04 +11:00
Andrew Tridgell
75a517824b build: put elf file in current directory 
makes it more obvious where the build ends up
 2014-11-13 17:27:53 +11:00
Andrew Tridgell
f04f8e226d SITL: abort on floating point error 
this creates a core file
 2014-11-13 17:27:20 +11:00
Andrew Tridgell
e49cd68b83 autotest: save core and elf files 
try to catch floating pt exception causes
 2014-11-13 17:27:02 +11:00
Andrew Tridgell
7f82397467 autotest: ensure we get the BIN flight logs even on mission failure 2014-11-13 16:31:26 +11:00
Andrew Tridgell
1fc8116069 AP_L1_Control: update NAV_L1_PERIOD docs 2014-11-13 14:26:42 +11:00
Andrew Tridgell
3813bcb7ce Plane: small improvement to takeoff docs 2014-11-13 14:24:37 +11:00
Andrew Tridgell
135f9b2c54 Plane: added STALL_PREVENTION option 
this will allow users to disable it if it proves to be a problem with
no airspeed sensor
 2014-11-13 14:06:00 +11:00
Andrew Tridgell
1552278fa3 AP_TECS: use aparm.stall_prevention 2014-11-13 14:05:33 +11:00
Andrew Tridgell
04b63a61bf AP_Vehicle: added stall_prevention variable 2014-11-13 14:05:22 +11:00
Andrew Tridgell
58fd72944d Plane: honor TKOFF_THR_MAX in set_servos() 
fixes issue #1555
 2014-11-13 11:35:28 +11:00
Andrew Tridgell
c8060cb9f7 Plane: use load factor to limit nav_roll_cd 
this calculates the aerodymanic load factor from smoothed airspeed and
uses it to limit roll to keep it below the level where the load factor
would take us past the aerodymanic limit of the airframe
 2014-11-12 13:36:02 +11:00
Andrew Tridgell
3667900e84 AP_SpdHgtControl: added load_factor in update_pitch_throttle() 2014-11-12 13:36:02 +11:00
Andrew Tridgell
bf591b0008 AP_TECS: take load factor into account in min airspeed 
this will push up minimum airspeed when turning
 2014-11-12 13:36:02 +11:00
Andrew Tridgell
ba312856ea Plane: provide a temperature to baro from the airspeed sensor 2014-11-12 13:36:02 +11:00
Andrew Tridgell
d404cc6542 AP_Baro: add set_external_temperature() 
this allows the use of an external temperature sensor for calibration
purposes, such as the sensor built in to the digital airspeed sensor.

The main affect this has is on the EAS2TAS calculation

The get_calibration_temperature() is used to choose either an external
temperature or an internal one. If an internal one is used then it is
clamped at no higher than 25 degrees C, to prevent hot electronics
on startup affecting altitude scaling and EAS2TAS
 2014-11-12 13:36:01 +11:00
Andrew Tridgell
8b794602d1 AP_Baro: make get_temperature() a const function 2014-11-12 13:36:01 +11:00
Brandon Basso
74232fd74a Tools: CHDK SX260 script update 
changes default Tv to be 1/1600 (higher) and ISO to be lower 200/800
Max1/Max2.  Should produce more crisp images in low light.
 2014-11-11 18:04:26 -08:00
Brandon Basso
136c358c24 Tools: Added initial support for Canon S100 
initial commit
 2014-11-11 18:03:57 -08:00
Arthur Benemann
5e2d7b1eaa Plane: Implement MSG_CAMERA_FEEDBACK on planes 2014-11-11 10:31:58 -08:00
Arthur Benemann
fe9e68f88c Plane: send feedback to the GCS of pictures taken 2014-11-11 10:31:54 -08:00
Arthur Benemann
92ead67d99 Copter: remove call to camera.configure and control 
The do_take_picture() function must be called for logging to occur.
configure_msg is empty at the moment so the call to this is remove
 2014-11-11 10:31:52 -08:00
Arthur Benemann
f24f5a6a32 Copter: remove call to camera.configure and control 
The do_take_picture() function must be called for logging to occur.
configure_msg is empty at the moment so the call to this is remove
 2014-11-11 10:31:49 -08:00
Andrew Tridgell
8ee677cfce Plane: fixed CLI build again 
thanks to John Williams for pointing it out
 2014-11-11 21:54:25 +11:00
Andrew Tridgell
986b7bf894 AP_InertialSensor: fixed frequency to 16 bit in LDM303D and L3GD20 drivers 2014-11-11 17:06:22 +11:00
Andrew Tridgell
c750cbebfb GCS_MAVLink: prevent asan errors in send_text_all 2014-11-11 15:16:26 +11:00
Andrew Tridgell
a566ebe4ec HAL_SITL: prevent array overruns in RCInput/RCOutput 2014-11-11 15:16:26 +11:00
Randy Mackay
ed099a73a3 Copter: minor rename of ACRO circular limits variable 2014-11-10 18:36:17 -08:00
Randy Mackay
83051c306d Copter: minor rename of a circular limits variable 2014-11-10 18:36:15 -08:00
Jolyon Saunders
a9205e1032 Copter: Add circular limits to ACRO 2014-11-10 18:36:13 -08:00