Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
44,611 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

41 Commits

Author SHA1 Message Date
Peter Hall fe5779fd88 AP_HAL_ChibiOS: add support for ProfiLEDs 2020-03-10 10:37:26 +11:00
Andrew Tridgell 669b98c6df HAL_ChibiOS: allow more than 32 WS2812 LEDs on a pin 2020-02-27 13:12:26 +11:00
Peter Hall 0ca6b7cf77 AP_HAL_ChibiOS: retry neopixel until successful send 2020-02-25 11:15:55 +11:00
Andrew Tridgell adf17414e0 HAL_ChibiOS: fixed output string for non-DMA capable chan 
this fixes a problem where the user requests DShot (which rquired DMA)
on an output channel which cannot allocate a DMA channel. We end up
sending normal PWM, so the string representation of the output modes
should reflect that
 2020-02-12 14:08:40 +11:00
Randy Mackay a71ae54d3a AP_HAL: add RCOutput::get_output_mode_banner 2020-02-04 12:23:33 +11:00
Andrew Tridgell 4636a4c458 HAL_ChibiOS: support LEDs with a wider range of frequencies 
this fixed LEDs on FMUv5 boards on first 4 aux channels. We need to
round up not round down in the resulting bitrate
 2019-11-18 15:54:36 -08:00
Mirko Denecke b84dcd483d AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Andrew Tridgell 03c1a8bfd9 HAL_ChibiOS: use safety button logic from AP_BoardConfig 2019-09-10 16:22:33 +10:00
Andrew Tridgell f441223b55 HAL_ChibiOS: implement updated NeoPixel API 
allow for N leds per chain, and setting separate colours per led in
each chain
 2019-09-10 13:03:28 +10:00
Tom Pittenger e3416b66dc AP_HAL_ChibiOS: add Neopixel output type, similar to dshot 2019-09-10 13:03:28 +10:00
Andrew Tridgell 8dd58b4181 HAL_ChibiOS: support reversible DShot motors 2018-11-16 08:33:35 +11:00
Peter Barker 17f643719a AP_HAL_ChibiOS: add override keyword in many places 2018-11-08 11:30:12 +11:00
Andrew Tridgell 81fe8b7138 HAL_ChibiOS: allow set of safety mask from IOMCU 2018-11-07 07:35:45 +11:00
Siddharth Purohit 87a2dea9d4 HAL_ChibiOS: disable features that require advanced dma 2018-09-19 12:14:15 +10:00
Andrew Tridgell 8c33b4b97d HAL_ChibiOS: implement set_failsafe_pwm() 2018-09-13 08:15:02 +10:00
Andrew Tridgell 3df2a1c228 HAL_ChibiOS: fixed dshot bad frames 
adding a pre-bit on the DMAR, and ensuring that all groups are setup
for DMA together fixes the remaining bad frames reports in BLHeli32
 2018-08-04 19:29:13 +10:00
Andrew Tridgell 946b4db0e6 HAL_ChibiOS: set min dshot separation to 100usec 
this fixes a problem with BLHeli32 not recognising dshot
 2018-08-04 19:29:13 +10:00
Andrew Tridgell 22ba9a0aea HAL_ChibiOS: fixed timeout of serial read bytes 
this allows for fast timeout of serial read bytes in BLHeli pass-thru
 2018-08-04 19:29:13 +10:00
Andrew Tridgell 7e897c16c0 HAL_ChibiOS: maintain rcout state beyond BRD_PWM_COUNT 
allow channels beyond BRD_PWM_COUNT to be sent over SBUS or DShot
distribution
 2018-05-26 12:08:54 +10:00
Andrew Tridgell 794ebe32e3 HAL_ChibiOS: fixed mixture of oneshot and normal PWM on IOMCU 2018-05-12 07:28:05 +10:00
Andrew Tridgell bb0cbd15a4 HAL_ChibiOS: implement fmuv4 safety state 
and added safety_mask and safety_pwm support for both fmuv3 and fmuv4
 2018-04-17 10:14:01 +10:00
Andrew Tridgell 4871bbf403 HAL_ChibiOS: make soft serial for RC serial more efficient 
using system ticks halves the IRQ time
 2018-04-16 07:40:55 +10:00
Andrew Tridgell 71cd58cc7e HAL_ChibiOS: run rc serial thread at top priority 
this maximises reliability for serial IO to ESCs, increasing flashing
reliability
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 3cd4f2a002 AP_ChibiOS: handle oneshot125 separately 
this sets up oneshot125 with the full 1000 steps of throttle
resolution, using a 8MHz clock. This matches the behaviour of modern
ESCs that measure PWM values with high accuracy
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 8e59f6aad6 HAL_ChibiOS: implement get_esc_scaling() 2018-04-07 09:10:29 +10:00
Andrew Tridgell 6fd0af11ef HAL_ChibiOS: implement telem request API 2018-04-07 09:10:29 +10:00
Andrew Tridgell 6bdb523630 HAL_ChibiOS: guarantee 1kHz output for DShot 2018-04-07 09:10:29 +10:00
Andrew Tridgell 382772d999 HAL_ChibiOS: initial support for ESC serial output 2018-04-07 09:10:29 +10:00
Andrew Tridgell 26d279e165 HAL_ChibiOS: improve DShot timing accuracy 2018-04-07 09:10:29 +10:00
Andrew Tridgell bc32276966 HAL_ChibiOS: support DShot output 
use DMAR burst DMA to minimise number of DMA channels needed

thanks to betaflight for the great reference implementation!
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 306d35655e HAL_ChibiOS: allow for bare board builds 
this allows for a build with no UARTs, no SPI, no I2C, no PWM. Great
for initial board bringup with just USB
 2018-03-02 12:52:50 +11:00
Andrew Tridgell 0cf104f2f3 HAL_ChibiOS: added scale_esc_to_unity() 
needed for per-motor compass cal
 2018-03-02 12:52:50 +11:00
Andrew Tridgell 7c23e33775 HAL_Chibios: set min output rate for oneshot to 100Hz 
this will keep ESCs happy during gyro cal
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 880a84294e HAL_ChibiOS: support oneshot mode 
supports oneshot 125 and oneshot
 2018-01-20 17:40:07 +11:00
Andrew Tridgell f14a847b97 HAL_ChibiOS: rename classes to remove 'Chibi' 
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 25b68dc150 HAL_ChibiOS: switch base freq when needed 
timers can't do below 123 Hz with a clock of 8MHz, so we need to
change clock frequency based on the target period
 2018-01-15 11:46:02 +11:00
Andrew Tridgell d17e9f321a HAL_ChibOS: fixed mixture of brushed and normal PWM 
allow non-brushed PWM servos with brushed main motors
 2018-01-15 11:46:02 +11:00
Andrew Tridgell c639708e22 HAL_ChibOS: auto-generate full PWM config 
use PWM markers in hwdef.dat to mark each PWM channel
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 3a004adbd4 HAL_Chibios: use macro for NUM_GROUPS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 26d6947bf6 HAL_ChibiOS: fixed PWM output 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8b6bab7b17 HAL_Chibios: added ChibiOS HAL 
this is based on initial work by Sid, reset here for easier merging
 2018-01-15 11:46:02 +11:00