Commit Graph

140 Commits

Author SHA1 Message Date
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell 57830784e2 Copter: use handle_rc_bind 2016-10-15 21:42:38 +11:00
Andrew Tridgell 5a9276a5c4 Copter: added SYSID_ENFORCE parameter
allows enforcement of SYSID_MYGCS
2016-10-15 17:14:19 +11:00
Randy Mackay 0aab175051 Copter: move proximity to g2 2016-10-14 14:02:29 +09:00
Andrew Tridgell ebbcabcb5f Copter: fixed comment 2016-10-14 11:40:09 +11:00
Randy Mackay 1665f4d416 Copter: report altitude and position control of new modes in sys-status message 2016-10-13 20:21:07 +09:00
Randy Mackay 4afa49eebe Copter: report proximity health in system-status 2016-10-13 20:21:07 +09:00
Andrew Tridgell 652b6b7564 Copter: deprecate RC_CHANNELS_RAW 2016-10-13 21:24:02 +11:00
Michael du Breuil ea45e5e6f1 Copter: Support GPS_RTCM_DATA 2016-10-11 11:00:36 +11:00
Lucas De Marchi b24d850695 ArduCopter: Fix use of logical op instead of bitwise op
../../ArduCopter/GCS_Mavlink.cpp: In member function 'void Copter::send_extended_status1(mavlink_channel_t)':
../../ArduCopter/GCS_Mavlink.cpp:281:37: error: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Werror=parentheses]
     uint32_t sensors_error_flags = !control_sensors_health & control_sensors_enabled & control_sensors_present;
                                     ^
compilation terminated due to -Wfatal-errors.
cc1plus: all warnings being treated as errors

Thanks to Ralph Campbell <ralphcampbell1@gmail.com> for the bug report.
2016-09-29 11:36:23 -03:00
Tom Pittenger 748beb094d Copter: log to dataflash statustext messages from my_gcs 2016-09-26 00:13:30 -07:00
floaledm 5910c94b65 Copter: change sensor health check to prevent false positive 2016-09-22 13:56:49 -05:00
Andrew Tridgell d0dd10aeea Copter: added DEV_OPTIONS parameter
this is for little used options to allow standard firmware builds to
enable those options for development purposes

First option is for MAVLink based ADSB avoidance
2016-09-12 16:24:34 +10:00
Michael du Breuil bec4bfa2ba Copter: Return RESULT_FAILED for GET_CMD_HOME if home is unset 2016-09-03 16:54:16 +09:00
Randy Mackay a8a31b1c24 Copter: fix health reporting to GCS for optical flow and precision landing
Includes slight restructuring to logic for other sensors but these should not have any functional effect
2016-08-31 13:59:16 +09:00
Andrew Tridgell 96de005591 Copter: moved MAV_TYPE define to defines.h 2016-08-25 10:16:20 +10:00
Andrew Tridgell a14ff8ac77 Copter: fixes for Frsky_Telem API changes 2016-08-25 10:16:20 +10:00
floaledm 157db51b9d Copter: make control_sensor vars available outside of send_extended_status1 2016-08-25 10:16:18 +10:00
Tom Pittenger 06b64000e1 Copter: move mavlink msg handling into library 2016-08-16 16:33:36 -07:00
Tom Pittenger d04a5d58fd Copter: decode correct ADSB packet 2016-08-16 16:33:36 -07:00
Tom Pittenger dbdd86ad46 Copter: set SYS_STATUS and HB_Flag Guided bits when in AVOID_ADSB 2016-08-12 14:46:44 -07:00
Peter Barker 4371223738 Copter: add dataflash as a bit for the mavlink SYS_STATUS message 2016-08-11 17:48:44 -03:00
Randy Mackay 0ed5665193 Copter: change parameter order of guided_set_angle
I thought it might be slightly better to put the optional parameters at the end
No functional change
2016-08-10 10:03:54 +09:00
Allan Matthew 6dd4e1a2aa Copter: accept yaw rate commands in Guided atttude controller 2016-08-10 10:03:37 +09:00
Randy Mackay 4e92f08bf1 Copter: only accept attitude targets in Guided mode 2016-08-02 18:26:04 +09:00
Randy Mackay 1161417d7f Copter: add GUIDED_NOGPS flight mode
This mode is a cut down version of Guided mode that only accepts attitude commands.
This mode does not require a GPS lock
2016-08-02 18:25:59 +09:00
Lucas De Marchi c0b49f6aeb ArduCopter: Remove i2c lockup count
This was returned only for a single bus and on all supported platforms
this is hardcoded to 0.
2016-07-28 18:03:09 -03:00
Randy Mackay 68899ed921 Copter: add adsb to failsafe structure and report in heartbeat to GCS 2016-07-25 20:24:37 +09:00
Randy Mackay f4db4bdb08 Copter: GCS_MAVLink passes packets to AP_Avoidance
This allows treating GLOBAL_POSITION_INT packets from other vehicles in the same way as ADSB packets
2016-07-25 20:24:37 +09:00
Andrew Tridgell 387da40fc5 ArduCopter: adjust for 16 channels in SERVO_OUTPUT_RAW 2016-07-25 10:06:02 +10:00
Tom Pittenger 07a838937e Copter: handle ADSB-Out packets 2016-07-22 13:38:37 -07:00
Andrew Tridgell e943a48eba Copter: added PLAY_TUNE message 2016-07-22 15:00:17 +10:00
Allan Matthew 860773260f Copter: support GPS_INPUT mavlink message 2016-07-12 15:34:51 +09:00
Randy Mackay 52d81f630f Copter: pass polygon fence mavlink messages to fence 2016-06-25 15:55:55 +09:00
Tom Pittenger 66d4caeeb0 Copter: add ADSB_streamrate 2016-06-19 11:24:33 -07:00
Tom Pittenger b433250da5 Copter: sanity check gps latlng 2016-06-01 17:38:50 -07:00
Peter Barker e977d85e0c Copter: move telemetry_delayed up into base class 2016-05-31 08:46:09 +10:00
Peter Barker 3cf174c343 Copter: move adjust_rate_for_stream up 2016-05-29 19:38:49 +10:00
Peter Barker bb19c57615 Copter: subclass GCS_MAVLink in place of defining its functions for it 2016-05-29 16:21:21 +10:00
Andrew Tridgell a922b98ac0 Copter: use send_heartbeat wrapper 2016-05-21 15:25:18 +10:00
Andrew Tridgell 31866c66d8 Copter: always build with MAVLink2 headers 2016-05-21 15:25:15 +10:00
Andrew Tridgell b85f129cc5 ArduCopter: handle SETUP_SIGNING message 2016-05-21 15:25:12 +10:00
Randy Mackay 7689315ba2 Copter: rename sonar to rangefinder 2016-05-21 10:36:53 +09:00
Randy Mackay 028946ae9e Copter: rename CONFIG_SONAR to RANGEFINDER_ENABLE 2016-05-21 10:36:53 +09:00
Saloni Jain bc22419286 Copter : Modified set_guided_destination() to reject requests for guided waypoints outside the fence. 2016-05-21 09:56:12 +09:00
Don Gagne 97d361333d ArduCopter: SET_SENSORS_OFFSETS support for third compass 2016-05-19 18:51:17 -03:00
Andrew Tridgell e4948544e7 Copter: cleanup unnecessarily complex gcs[] usage 2016-05-17 08:27:35 +10:00
Randy Mackay 0a2336a5a8 Copter: update solo-buttons to work with master
Change was due to addition of reason codes since PR was first submitted
2016-05-13 11:42:25 +09:00
Jonathan Challinger 67cd2bae08 Copter: implement SOLO_BTN commands 2016-05-13 11:42:25 +09:00
skyscraper 4980c8bc94 ArduCopter: RC_Channel refactor
More fixing up of RC_Channel change direct access to data members
to access via member functions.
2016-05-10 16:21:16 +10:00