Commit Graph

64599 Commits

Author SHA1 Message Date
Peter Barker 6d844d8c79 autotest: test the simulated rangefinder driver 2024-08-30 11:19:14 +10:00
Clyde McQueen e8bd38092e Sub: reduce PILOT_SPEED_ minimums 2024-08-29 20:00:54 -03:00
Clyde McQueen cc06f7099c AC_WPNav: lower WPNAV_SPEED min to 10 cm/s 2024-08-30 07:55:50 +09:00
caijie f8cbd29570 AP_Bootloader: reserve IDs for VIEWPRO 2024-08-30 07:51:02 +09:00
Maxim Buzdalov 15d6e664d8 AP_Notify: Fix compilation error in GPIO_LED_1.cpp 2024-08-29 09:37:50 +10:00
bugobliterator 0dbe9ed27f bootloaders: update PPPGW bootloaders 2024-08-28 18:20:29 +10:00
bugobliterator 8222d65ebe AP_Bootloader: make Content-Length handle case insensitive 2024-08-28 18:20:29 +10:00
bugobliterator 957e92aca1 AP_HAL_ChibiOS: use CubePilot-CANMod's Serial Order 2024-08-28 18:20:29 +10:00
Henry Wurzburg e6351b6a41 AP_Notify:correct and expand 1 led flash sequences 2024-08-28 18:19:26 +10:00
George Zogopoulos bc1e490257 Plane: In transition use TRIM_THROTTLE when TKOFF_THR_MIN==0 2024-08-28 18:18:55 +10:00
George Zogopoulos 6fee0eccad Plane: Removed all instances of in_back_transition
It is not currently used anywhere.
2024-08-28 18:18:55 +10:00
George Zogopoulos f7d40c0c73 autotest: Added TKOFF_THR_MIN test 2024-08-28 18:18:55 +10:00
George Zogopoulos 3b247a346a Plane: TKOFF_THR_MIN is applied to SLT transitions
Also split in_transition() to forward and backward.
2024-08-28 18:18:55 +10:00
hagerashraf 8d292def15 hwdef: reserve board Ids for DroneBuild boards
I added two new boards to the file, with 10 reserved IDs for DroneBuild drones' boards
2024-08-28 16:26:05 +10:00
Henry Wurzburg 4a72373624 AP_GPS:fix metadata typo 2024-08-28 15:31:08 +10:00
Peter Barker 51fe703ce2 mavlink: reference master; GNSS_INTEGRITY message 2024-08-27 16:32:50 +10:00
CRazy cc182c69e9 AP_Bootloader: ID reserve for HGLRCF405V4 2024-08-27 15:40:02 +10:00
Peter Barker a8b7513287 Tools: build_options.py: sort IMU into single section 2024-08-27 12:00:47 +10:00
Peter Barker bd987aa84b Tools: add build option for batchsampler
also create an IMU category to hold IMU-specific options
2024-08-27 12:00:47 +10:00
Henry Wurzburg 1631e85fe8 AP_GPS:add note to old param names to avoid confusion 2024-08-27 12:00:14 +10:00
Peter Barker c3d89ed9d1 autotest: remove unused parameters from Blimp defaults file 2024-08-27 12:00:03 +10:00
Holden 045059580c Tools: Translate Linux Mint Wilma to Noble 2024-08-27 11:59:53 +10:00
Iampete1 3c6e5691e4 Filter: LowPassFilter: use `calc_lowpass_alpha_dt` helper 2024-08-27 11:21:22 +10:00
Iampete1 5453f3a0cc AP_DroneCAN: register handle_actuator_status_Volz callback and fix logging 2024-08-27 11:18:18 +10:00
Peter Barker 46db6c12c1 SITL: correct use of simulated GPS data
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>

uses the elements out of the simulated GPS data "d", rather than going to the parameters in teh simulated GPS "backends".
2024-08-27 11:14:09 +10:00
Peter Barker b89256bec4 autotest: add test that jamming simulator works 2024-08-27 11:14:09 +10:00
Peter Barker 3c0c2bfa67 AP_Math: add a test for rand_float 2024-08-27 11:09:13 +10:00
Peter Barker 84bcea73e1 AP_Math: correct range of returned value for rand_float on real hardware 2024-08-27 11:09:13 +10:00
Andrew Tridgell 6de6de694a AP_Math: allow rand_float() on STM32 2024-08-27 11:09:13 +10:00
Peter Barker ee6bd4fca0 AP_RangeFinder: number enum entries
we log these so they should be numbered
2024-08-27 11:05:32 +10:00
Peter Barker 46d37abcf7 Copter: avoid nullptr deref in config_error_loop
we may enter the config_error_loop before we call Copter's methods which allocate the wpnav object.

We send mavlink messages in the config error loop, one of which calls this method - so we end up with a nullptr dereference.

We might be able to find a way to stop sending this message in the config error loop, but that's likely to take some time to do....
2024-08-27 11:04:02 +10:00
Wu a33a0d1579 HAL_ChibiOS: fixed the imu orientation of RadiolinkPIX6 2024-08-27 10:26:50 +10:00
Willian Galvani 4ec023ac1a Tools: ardupilotwaf: allow automatic upload to BlueOS 2024-08-27 10:25:35 +10:00
Randy Mackay 5bcbf56a47 AP_Mount: Siyi ZT6 set lens fix
ZT6 has RGB and Thermal image sensors only
2024-08-27 10:23:47 +10:00
Randy Mackay 0874202aa1 AP_Mount: Siyi ZT6 hardware id fix 2024-08-27 10:23:47 +10:00
Peter Barker c79ba79ed1 AP_Logger: AllTypes example: freshen output file 2024-08-27 10:19:26 +10:00
Peter Barker 1c15488e35 AP_Common: add comment on top of float16 storage
there are multiple standards for storing these values
2024-08-27 10:19:26 +10:00
Peter Barker b4e3b6cdd5 AP_Logger: add support for logging float16 2024-08-27 10:19:26 +10:00
Peter Barker 4e27c51aa1 AP_NavEKF3: do not log DefaultAirspeed if logging not started
if we are not going to use this value ourselves then we certainly should not add it to the replay log
2024-08-27 10:15:10 +10:00
Peter Barker 00dc15063e AP_NavEKF: avoid copying all but the best element when recalling time-horizon data 2024-08-27 10:07:52 +10:00
Iampete1 44ae148718 Tools: autotest: defualt params: update plane-ice for ICE start stop function 2024-08-27 09:37:34 +10:00
Iampete1 a75a97eb02 Tools: autotest: quadplane: ICE Don't setup ICE start channel its already in model defaults 2024-08-27 09:37:34 +10:00
Iampete1 98d9890bf1 AP_ICEngine: convert from local servo endpoints and rc channel params 2024-08-27 09:37:34 +10:00
Iampete1 f9f9beb858 Plane: add ICEngine start/stop aux function 2024-08-27 09:37:34 +10:00
Iampete1 51963f497b RC_Channel: add ICEngine start / stop aux function 2024-08-27 09:37:34 +10:00
Iampete1 eee2d2f57e SRV_Channel: add methods to set defualt and save min/max values 2024-08-27 09:37:34 +10:00
Iampete1 5a3fb37214 Plane: call ICE init 2024-08-27 09:37:34 +10:00
Peter Barker 14e5fd396a autotest: check altitude in GPSWeightedBlending test 2024-08-27 09:26:06 +10:00
Peter Barker 39b4b80a5f AP_GPS: create real AP_GPS_Blended backend 2024-08-27 09:26:06 +10:00
Peter Barker c4fe57d197 autotest: add test for blending while affinity is running 2024-08-27 09:26:06 +10:00