Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
13,251 Commits 71 Branches 509 Tags 778 MiB
Commit Graph

145 Commits

Author SHA1 Message Date
Andrew Tridgell 9184e47f84 Plane: added TERRAIN_LOOKAHD parameter 
distance to look forward for terrain following
 2014-08-07 09:31:03 +10:00
Andrew Tridgell 2a288824c0 Plane: make STAB_PITCH_DOWN in degrees 
try to avoid new centi-degrees parameters
 2014-08-06 17:59:18 +10:00
Andrew Tridgell 8610d9a8ea Plane: added GLIDE_SLOPE_MIN parameter 
this is used to prevent slow glide slopes being used for small
altitude changes in missions. This allows more accurate tracking of
altitude with terrain changes
 2014-08-04 21:02:13 +10:00
Andrew Tridgell b64ab07ca4 Plane: added STAB_PITCH_DN_CD parameter 
this adds some down trim when at throttle levels below the trim
throttle in FBWA mode.

defaults to 200 centi-degrees. I may adjust based on flight tests
 2014-08-03 17:17:20 +10:00
Matthias Badaire 57253fc2ee Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry 
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
 2014-07-29 17:08:20 -07:00
Andrew Tridgell b158b7e5a9 Plane: replace HAVE_AP_TERRAIN with AP_TERRAIN_AVAILABLE 2014-07-25 07:59:54 +10:00
Andrew Tridgell 3e320d71ab Plane: added TERRAIN_FOLLOW parameter 
when enabled RTL, CRUISE and rally points will use terrain altitude
 2014-07-24 21:50:19 +10:00
Andrew Tridgell 32bfeed169 Plane: incorporate terrain mavlink calls 2014-07-24 21:45:47 +10:00
Andrew Tridgell 28e1449e8d Plane: updates for new AP_RangeFinder API 2014-07-08 15:07:50 +10:00
Andrew Tridgell 055d8fe7aa Plane: added TKOFF_THR_MAX parameter 2014-05-24 22:19:50 +10:00
Andrew Tridgell d87619c2f1 Plane: added 4 new parameters to control takeoff 
this gives flexible control for taildragger takeoff
 2014-05-23 07:30:58 +10:00
Andrew Tridgell 94d528e548 Plane: changed baudrate parameters to 16 bit 2014-05-21 12:45:25 +10:00
Michael Day 568fc9e6c9 Plane: Now using AP_Rally library. 2014-04-19 09:16:05 +10:00
Andrew Tridgell d30c4ffe80 Plane: added AUTOTUNE_LEVEL parameter 2014-04-13 22:12:27 +10:00
Emile Castelnuovo a111d174c1 Plane: added VRBRAIN #defines and #includes 2014-04-08 16:19:20 +10:00
Andrew Tridgell e19341ca32 Plane: convert to new GPS driver API 2014-04-01 06:38:24 +11:00
Michael Day f921d4fbac Plane: FENCE_RET_RALLY param. Plane returns to rally point on breach. 2014-03-27 09:26:20 +11:00
Michael Day 25f23cf16c Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence. 2014-03-27 09:26:20 +11:00
Andrew Tridgell ff70c87f0b Plane: support 14 RC channels on PX4 2014-03-25 14:47:05 +11:00
Randy Mackay fdaf3fc177 Plane: add AP_Mission object to parameter list 2014-03-19 12:10:54 +09:00
Randy Mackay a76e2ab02e Plane: reserve NavEKF slot in param list even when not used 
Although this wasn't a problem immediatley, if someone had added a
parameter after k_param_NavEKF it's position in eeprom could have moved
as AP_AHRS_NAVEKF_AVAILABLE was enabled/disabled
 2014-02-21 13:53:05 +09:00
Paul Riseborough 8c4b0b9be9 Plane : NavEKF Mavlink tunable parameter - first attempt 2014-02-15 05:48:22 +11:00
Andrew Tridgell c3b7e76c28 Plane: added flaperon support 
this adds FLAPERON_OUTPUT and FLAP_IN_CHANNEL to allow both manual
and auto flap control for both normal flaps and flaperons
 2014-02-06 12:38:59 +11:00
Andrew Tridgell 6cabca690e Plane: fixed RSSI_RANGE enum 
many thanks to Valince for spotting this
 2014-01-31 12:14:18 +11:00
Andrew Tridgell 3a986474e0 Plane: added RSSI_RANGE parameter 2014-01-30 11:29:35 +11:00
Andrew Tridgell d3adf4c32c Plane: enable AP_BoardConfig 2014-01-20 17:06:28 +11:00
Andrew Tridgell 874110b29d Plane: make LOG_BITMASK 32 bits 2014-01-14 13:06:52 +11:00
Michael Day c87d72353f Plane: Introducing FENCE_RETALT parameter. 2013-12-31 09:48:20 +11:00
Michael Day b0a0316dd6 Plane: Now using AP_Arming library. 2013-12-11 17:29:23 +11:00
Andrew Tridgell 5a0cb5dea4 Plane: added sonar logging to dataflash 2013-11-28 21:49:27 +11:00
Andrew Tridgell 8383abc1fe Plane: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD 2013-11-26 13:00:03 +11:00
Andrew Tridgell 2fa5e6310d Plane: added 3rd telemetry stream on platforms that have it 
this generalises the gcs object usage
 2013-11-23 19:29:22 +11:00
Andrew Tridgell 490a061c6f Plane: added HIL_ERR_LIMIT 
this allows DCM to recover if HIL attitude drifts too far from true attitude
 2013-11-23 18:50:57 +11:00
Andrew Tridgell 5bf1463e7a Plane: added RALLY_LIMIT_KM 
this will prevent an embarressing use of a rally point from the wrong
airfield
 2013-10-06 14:51:13 +11:00
Andrew Tridgell d275f50539 Plane: added GROUND_STEER_ALT and GROUND_STEER_DPS 
this uses the new AP_SteerController steering controller developed for
the rover code to allow for ground steering of planes
 2013-10-05 07:46:27 +10:00
Andrew Tridgell 081510d37a Plane: added ACRO_LOCKING parameter 
this enables/disables the attitude locking in acro mode, allowing acro
to be a pure rate controller
 2013-10-05 07:45:12 +10:00
Michael Day 497c95de8e Plane: Add support for rally points. 
Added parameter RALLY_TOTAL.

Added handlers for new MAVLink messages RALLY_POINT and
RALLY_FETCH_POINT.

defines.h modified to make room in EEPROM to store rally points.

rally.pde added and is responsible for ensuring rally points get
stored in the correct spot in EEPROM.

Multiple Rally/RTL point support now done.  If rally points have
been defined, then when RTL mode is entered, the closest Rally
point is chosend and the plane loiters at that point.

Note only 10 rally points can be defined; this is to save space in
the APM's EEPROM.
 2013-10-03 12:21:08 +10:00
Randy Mackay c64d444b5a Plane: integrate BattMonitor 2013-10-03 11:16:08 +09:00
Andrew Tridgell dd6a69f588 Plane: added WP_MAX_RADIUS parameter 
useful when using AUTO_FBW_STEER for manual steering in competitions
 2013-09-13 17:43:08 +10:00
Andrew Tridgell cc6acac1dd Plane: added AUTO_FBW_STEER option 
this is an unusual option that gives FBWA flight control in AUTO
mode. It is being added to support use of APM in an aerial robotics
competition where students need to pilot the plane, but they still
need waypoint triggering of payloads
 2013-09-13 14:38:09 +10:00
Andrew Tridgell accfd46633 Plane: update for new APM_Control API 2013-08-14 14:57:41 +10:00
Andrew Tridgell 233b033e8c Plane: removed old speed/altitude control algorithms 
Use TECS only. This makes the code a lot simpler and easier to
properly document
 2013-07-22 13:28:11 +10:00
Andrew Tridgell 74dabad1f3 Plane: added SKIP_GYRO_CAL parameter 
useful for starting the sim at high altitudes, and for starting planes
without having to hold them still
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 608345415b Plane: pass aircraft parameters to attitude controllers 
also cope with rename of airspeed min/max variables

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-07-18 14:53:37 +10:00
Andrew Tridgell f300df5fd1 Plane: added FS_LONG_TIMEOUT and FS_SHORT_TIMEOUT parameters 
this is to address the issue raised here:

http://diydrones.com/forum/topics/ardupilot-circle-mode
 2013-07-12 11:56:04 +10:00
Andrew Tridgell fc67f51901 Plane: added ACRO_ROLL_RATE and ACRO_PITCH_RATE parameters 
default to 180 degrees/second, which seems reasonable
 2013-07-11 09:10:41 +10:00
Andrew Tridgell a5bda3ffef Plane: changed to using a "aircraft parameters" structure 
this structure can be passed to libraries to give them easy access to
critical user parameters
 2013-07-04 16:56:57 +10:00
Paul Riseborough d62636d309 Plane: added new TECS altitude controller 
Includes improvements to takeoff/launch detect logic to support hand
launching for X-8 flight
 2013-07-04 16:56:57 +10:00
Andrew Tridgell 45f5d05bd2 Plane: enabled RELAY_* parameters 2013-06-25 12:44:26 +10:00
Andrew Tridgell 056e0ca40d Plane: APM2 doesn't have channel 9 PWM output 2013-06-24 13:06:54 +10:00