Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
38,640 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

330 Commits

Author SHA1 Message Date
Andrew Tridgell 8e5c0fa32b AP_InertialSensor: disable kill IMUs with HAL_MINIMIZE_FEATURES 2019-07-07 19:03:01 +10:00
Andrew Tridgell 3444e82ef9 AP_InertialSensor: added RC switch for killing IMUs 2019-07-07 19:03:01 +10:00
Andrew Tridgell 053f0cb689 AP_InertialSensor: try much harder to get all IMU samples 
this we ensures we get new data for all active IMUs on each loop,
rather than sometimes returning with some IMUs not having data.

This matters as not having a sample on an IMU for a single loop can
cause an EKF IMU failover, which will degrade the learned bias
variances

The issue is usually only seen under high load, such as requesting a
loop rate beyond what the hardware is capable of
 2019-07-07 19:03:01 +10:00
Andy Piper 36878e9b3c AP_InertialSensor: Allow all filter frequencies to be 16bit. 2019-06-06 17:09:17 +10:00
Andy Piper 18d403c3ac AP_InertialSensor: Rework notch filter allocation and sampling 
https://github.com/ArduPilot/ardupilot/issues/11346

Allocate a notch filter per-IMU.
Update the notch filters in the backend at the sensor sample rate.
Allow raw logging of post-filtered gyro and accel values.
 2019-06-06 17:09:17 +10:00
Andrew Tridgell aef343bfd0 AP_InertialSensor: removed old mRoControlZeroF7 config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 039e7366b0 AP_InertialSensor: support new sensor config setup 2019-05-30 15:39:57 +10:00
Andrew Tridgell 3823ba539c AP_InertialSensor: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell 02326ac52c AP_InertialSensor: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Phillip Kocmoud 6665e4c0a7 AP_InertialSensor: probe IMUs for mRoControlZeroF7 2019-05-10 15:05:42 +10:00
Jaaaky 47c65314fb AP_InertialSensor: fix accelcalsimple watchdog 2019-05-01 14:23:20 +10:00
Andrew Tridgell 034d476fa5 AP_InertialSensor: prevent watchdog in accelcal 2019-04-22 16:53:35 +10:00
Andrew Tridgell 9c48d001ac AP_InertialSensor: skip gyro cal on watchdog reset 2019-04-22 16:53:35 +10:00
Andrew Tridgell c988eb2fd9 AP_InertialSensor: don't set INS_ENABLE_MASK to found IMU mask 2019-04-22 14:56:59 +10:00
L Kurt Shaw d08ab88dea INS: AP_InertialSensor comments for new cubes 
Correct comments ICM20648 should have been ICM20948
 2019-04-02 10:52:43 +11:00
Randy Mackay 5d8747c81d AP_InetialSensor: fixup ENABLE_MASK parameter desc 2019-03-27 13:14:48 +09:00
Andrew Tridgell 4a334d0ed7 AP_IneertialSensor: fixed startup race in SITL 2019-03-21 18:54:32 +11:00
Andrew Tridgell 0a718ba330 AP_IneertialSensor: fixed orientations and gyro scale factors for new Invensense IMUs 2019-03-21 18:54:32 +11:00
Siddharth Purohit 8c2d3945de AP_IneertialSensor: add support for custom accel scale 
adds support for 30g measurement on ICM20649
 2019-03-21 18:54:32 +11:00
Siddharth Purohit 3a833d9a90 AP_InertialSensor: fix rotation for ICM20649 2019-03-21 18:54:32 +11:00
L Kurt Shaw 8d75e8c5bb INS: AP_InertialSensor.cpp 
Fix typo in comments should be NFC
 2019-03-12 15:56:55 +09:00
Andrew Tridgell 81cd103073 AP_InertialSensor: probe for new v2 invensense IMUs 
also suppress LSM9DS0 whoami warnings, as these will now be common
with new IMUs

and make 20602 show up as a new devtype so we can distinguish it
 2019-03-11 12:40:21 +11:00
Siddharth Purohit 528c0b4d7c AP_InertialSensor: add drivers for register bank based Invensense Sensors 2019-03-06 20:47:10 +11:00
Siddharth Purohit 0cfcd0986e AP_InertialSensor: look for icm20602 for Pixhawk 2 series flight boards 2019-03-06 20:47:10 +11:00
Andrew Tridgell 07e2167996 AP_InertialSensor: setup for fmuv6 2019-02-26 16:18:26 +11:00
Tom Pittenger 9347e6d36f AP_InertialSensor: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Andrew Tridgell 6048c10a7c AP_InertialSensor: added driver for BMI088 
setup for 1600 Hz accel sample, 2kHz gyro sample, 24g accel range
 2019-01-31 12:05:57 -08:00
Andrew Tridgell 9520f5f768 AP_InertialSensor: removed F4Light 2019-01-21 21:57:21 +11:00
Peter Barker 43e3acc954 AP_InertialSensor: remove use of never-set AP_HAL_PX4 and AP_HAL_VRBRAIN 2019-01-18 09:53:44 +11:00
Peter Barker 43e47f33e4 AP_InertialSensor: remove PX4 backend 2019-01-17 06:41:33 +11:00
Michael du Breuil 983356213a AP_InertialSensor: Remove unused parameter 2018-12-23 12:46:37 -08:00
Randy Mackay 6b3fa520b5 AP_InertialSensor: add range to POS param description 2018-12-13 20:14:01 +09:00
Andrew Tridgell 3de860f73b AP_InertialSensor: fixed orientation of 2nd OmnibusF7V2 IMU 2018-12-12 16:27:34 +11:00
Andrew Tridgell 89b8124560 AP_InertialSensor: added BMI055 IMU driver 2018-06-08 09:56:41 +10:00
Andrew Tridgell bfa66c9397 AP_InertialSensor: detect two IMUs on FMUv5 2018-06-06 07:15:41 +10:00
Francisco Ferreira 8b32960d3e AP_InertialSensor: remove Qualcomm board support 2018-05-17 09:57:20 +10:00
Peter Barker 1a640e3405 AP_InertialSensor: parameterise sensor-rate logging, generalise it 
AP_InertialSensor: add parameters for push-to-log interval and count

AP_InertialSensor: rename BAT_RAW to BAT_OPT

This becomes a bitmask of options for the BatchSampler

AP_InertialSensor: rename 'fast sample' to 'sensorrate sample'

AP_InertialSensor: const sensor-rate filter method

AP_InertialSampler: remove hard-coding of sample rate multiplier

AP_InertialSensor: use parameter to enable/disable sensor-rate logging

AP_InertialSensor: use a parameter to control sensor-rate logging

AP_InertialSensor: allow backends to override sensor data multiplier

e.g. some accelerometers are sensitive over wider ranges than the default 16G

AP_Inertialsensor: correct sample rate multiplier
 2018-05-01 09:35:29 +10:00
Jacob Walser ad4e928e7d AP_InertialSensor: add support for custom board orientations 2018-04-24 13:04:37 +01:00
Andrew Tridgell ea2dc9b831 AP_InertialSensor: added OMNIBUSF7V2 INS sensors 
a dual-IMU board
 2018-04-12 11:50:44 +10:00
Peter Barker aca87ab638 AP_InertialSensor: remove pointless initialisations 
AP_InertialSensor: avoid pointless zeroing in constructor

AP_InertialSensor is either in bss or is created via new (which zeroes
memory)
 2018-04-04 12:14:02 +01:00
Peter Barker 2396a248ed AP_InertialSensor: use ahrs singleton for simple accelcal 2018-04-02 23:25:05 +01:00
Andrew Tridgell 455c0e25e1 AP_InertialSensor: allow for HAL_INS_NONE 2018-03-02 12:52:50 +11:00
Andrew Tridgell b61caa9c57 AP_InertialSensor: added SP01 board type 2018-02-14 18:27:00 +11:00
Peter Barker 096f7367bf AP_InertialSensor: add ins() to AP:: namespace 2018-02-13 17:15:05 +11:00
Andrew Tridgell 0e6497aa85 AP_InertialSensor: merged in Revo driver 2018-02-10 09:14:41 +11:00
Andrew Tridgell ad8db6cda3 AP_InertialSensor: added sensor type ICM20789_SPI 2018-02-08 17:36:33 +11:00
Andrew Tridgell b9e5649888 AP_InertialSensor: support PCNC1 2018-02-08 17:36:33 +11:00
Igor Anokhin e6d4b2a087 AP_InertialSensor: add LSM9DS1 entry 
Enable LSM9DS1 in case it is selected
 2018-02-06 09:31:26 -08:00
LukeMike 502f19cbae VRBRAIN / AP_InertialSensor: added inertial sensors init for VR Brain boards 2018-02-05 08:26:49 +11:00
Andrew Tridgell 100363ba03 AP_InertialSensor: if no sensors found allow parameter change 2018-01-20 10:36:22 +11:00