night-ghost
2065cc879c
AP_HAL: mAG3110 driver
2018-02-02 21:07:40 +11:00
Lucas De Marchi
184b017b33
AP_HAL: fix warning from having undefined HAL_WITH_IO_MCU
...
In file included from ../../libraries/AP_IOMCU/AP_IOMCU.cpp:8:0:
../../libraries/AP_IOMCU/AP_IOMCU.h:10:5: warning: "HAL_WITH_IO_MCU" is not defined [-Wundef]
#if HAL_WITH_IO_MCU
^
../../libraries/AP_IOMCU/AP_IOMCU.cpp:10:5: warning: "HAL_WITH_IO_MCU" is not defined [-Wundef]
#if HAL_WITH_IO_MCU
^
And so on.
2018-02-02 09:11:46 +09:00
Andrew Tridgell
93a993c575
AP_HAL: setup RTSCTS and SBUS_OUT
2018-01-20 17:40:07 +11:00
Andrew Tridgell
d030f2888b
AP_HAL: added multi-object push to RingBuffer
...
this is much more efficient than pushing them one at a time
2018-01-20 17:40:07 +11:00
Peter Barker
87be7fea0c
AP_HAL: added support for Sparky2 STM23F405 board
2018-01-20 17:40:07 +11:00
Nikita Tomilov
a50e6c6dd7
AP_HAL: board: linux: Add default CAN interface name
2018-01-17 07:24:17 -08:00
Alexey Bulatov
09de8e852d
AP_HAL: Make methods get_UAVCAN and set_UAVCAN pure
2018-01-17 07:24:17 -08:00
Andrew Tridgell
3f5534eed5
AP_HAL: use calloc in preferance to malloc
2018-01-17 11:22:05 +11:00
Andrew Tridgell
4322ef7ca4
AP_HAL: prevent valgrind errors in EKF
...
ensure that EKF memory is zero on start
2018-01-17 11:22:05 +11:00
Andrew Tridgell
d2c04aa649
AP_HAL: moved board defines to hwdef.dat
2018-01-15 11:46:02 +11:00
Andrew Tridgell
2773b17fad
AP_HAL: added support for AP_Terrain for ChibiOS
2018-01-15 11:46:02 +11:00
Andrew Tridgell
c80149123f
AP_HAL: use hwdef.h for config options in chibios
2018-01-15 11:46:02 +11:00
Andrew Tridgell
8699b6233a
AP_HAL: support MindPX-v2
2018-01-15 11:46:02 +11:00
Andrew Tridgell
c7fd455f6a
AP_HAL: added FMUv4 port for ChibiOS
2018-01-15 11:46:02 +11:00
bugobliterator
9d6ab78376
AP_HAL: add support for memory allocation by region type
2018-01-15 11:46:02 +11:00
Andrew Tridgell
8260b3f65f
AP_HAL: allow bus speed and SMBUS enable on I2C
...
this allows a driver to request a bus speed for a device, and whether
the device should be in SMBUS mode. It also allows a min timeout to be
specified, to allow for slow devices
2018-01-15 11:46:02 +11:00
Andrew Tridgell
347c774665
AP_HAL: fixed example build on ChibiOS
2018-01-15 11:46:02 +11:00
Andrew Tridgell
391affc02d
AP_HAL: support ChibiOS
2018-01-15 11:46:02 +11:00
mirkix
0e7ade6f0c
AP_HAL: add new board PocketPilot
2017-12-27 16:01:55 +00:00
Mark Whitehorn
66c4b7d986
AP_HAL: support SBusOut
...
rename enable_sbus_out to enable_px4io_sbus_out
2017-11-30 10:20:04 +11:00
HeBin
895b5f34b8
AP_HAL: add Robsense PhenixPro Devkit Board support
2017-11-22 10:10:21 -08:00
Chinese66
700aaf2e8f
AP_HAL: add delay to UART_test example
...
For AC3.5 and higher version, serial uartA-USBconsole cannot work. Maybe the code before "setup" has been changed. Ensure that the uartA can be initialized
2017-11-22 09:05:17 +09:00
Georgii Staroselskii
6326e23682
AP_HAL: Navio: add defs for BoardLED
2017-11-17 09:20:55 -08:00
alexshirley
065b00eb81
AP_HAL: Remove SBUS macro from ocpoc target
2017-11-01 10:28:40 -07:00
Lucas De Marchi
7fd10921c3
AP_HAL: Linux: add define for storage dir
...
This mantains compatibility with what the boards were already using,
except for Aero and Minlure in which I'm changing it already as this is
desired.
2017-10-30 16:57:37 -07:00
Lucas De Marchi
591b846e2d
AP_HAL: switch aero and minlure to new log/terrain directory
...
Additionally make Edge use the default.
2017-10-30 16:57:37 -07:00
Lucas De Marchi
d2ba8409d0
AP_HAL: provide default directory for Linux boards
...
/var/lib/<project> is more in line to where projects save their data.
Also, remove APM from dir name as it should had been done some time
ago.
This is only the default (and recommended for any new board). Existing
boards that want to adopt the default can remove their defines.
2017-10-30 16:57:37 -07:00
Georgii Staroselskii
4e2028c32f
AP_HAL: Edge: enable Heat PWM
2017-10-20 13:03:08 -07:00
Georgii Staroselskii
db9f427617
AP_HAL: Edge: add compass settings
...
Use HMC5883L as default before UAVCAN Linux support is in place
2017-10-20 13:03:08 -07:00
Georgii Staroselskii
2dd68243a2
AP_HAL: add Edge support
2017-10-20 13:03:08 -07:00
Francisco Ferreira
be1f0801a3
AP_HAL: stop defining a default Lightware I2C bus
...
When a specific bus isn't defined we now search I2C buses 0 and 1
2017-10-09 11:57:02 +01:00
Lucas De Marchi
7edde571e1
AP_HAL: RCOutput_Tap: make LEDs blink on non-Aero ESCs
...
The protocol defines bits for controlling possible LEDs. On Aero the ESC
firmware simply ignores these bits and blink with a fixed frequency.
Add logic to be able to blink the ESC if not flashed with the Aero
version of the firmware.
2017-09-28 08:59:52 -07:00
Lucas De Marchi
2c3054cbae
AP_HAL: RCOutput_Tap: remove feedback from ESCs
...
This is not currently working on Aero, the only user of it right now,
and it has been commented out. Remove dead code.
2017-09-28 08:59:52 -07:00
Lucas De Marchi
d3a1ed9792
AP_HAL: RCOutput_Tap: fix comment with protocol bits
2017-09-28 08:59:52 -07:00
Lucas De Marchi
58ae139b8f
AP_HAL: add possible external compasses for aero
2017-09-27 09:25:34 -07:00
Andrew Tridgell
08344557d9
AP_HAL: fixed missing LPS25H define
2017-09-27 16:42:31 +10:00
fnoop
149188de12
AP_HAL: Add size() method to RingBuffer ObjectArray
2017-09-22 09:56:00 -07:00
fnoop
3ddd9a6bca
AP_HAL: RingBuffer: Prefix private members with underscore
2017-09-22 09:55:49 -07:00
Lucas De Marchi
68b3e5ccab
AP_HAL: aero: define uart RCOutput_Tap
2017-09-21 07:59:20 -07:00
Lucas De Marchi
51665a2ea9
AP_HAL: RCOutput_Tap: split baudrate set for Linux and Nuttx
...
On Linux (and in most of posix-like systems) the baudrate set in struct
termios via cfset[io]speed is actually the index of the standard
baudrates, it's not the baudrate per se (hence the use of B* macros).
On Linux it's possible to set the baudrate by passing the baudrate
itself to TCSETS2 ioctl. Unfortunately it's not possible to include
asm/termbits.h and termios.h in the same compilation unit, so we need to
split it. Here we split into a Linux and a NuttX implementation.
2017-09-21 07:59:20 -07:00
Lucas De Marchi
58a76adc13
AP_HAL: RCOutput_Tap: allow different device to be used
2017-09-21 07:59:20 -07:00
Lucas De Marchi
f6b1099896
AP_HAL: move in tap esc implementation
...
This can be shared with Linux.
2017-09-21 07:59:20 -07:00
Peter Barker
68652867e1
AP_HAL: make in_main_thread public, pure and virtual
2017-09-19 09:40:11 +10:00
Lucas De Marchi
13f4ba7392
AP_HAL: remove raspilot
2017-09-12 15:06:19 -07:00
Francisco Ferreira
51a8aa3d1f
AP_HAL: remove URUS
2017-09-11 10:04:11 -07:00
davidaroyer
8862e76284
AP_HAL: add support for Aerotenna OcPoC-Zynq hardware
2017-09-08 07:30:49 -07:00
Lucas De Marchi
2c72fc94ba
AP_HAL: change aerofc baud to 921600
2017-09-01 07:55:47 -07:00
Lucas De Marchi
0e502d89a3
AP_HAL: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Francisco Ferreira
e0f4d3dbe5
AP_HAL: remove unused HAL_AIRSPEED_MS4515DO_I2C_BUS macro
2017-08-05 03:15:53 +01:00
Lucas De Marchi
5ea1784838
global: remove AP_HAL::in_timerprocess()
...
This is not used and in the only places it would make sense would be
internally to the scheduler so remove it.
2017-08-03 20:25:14 -07:00
