Commit Graph

6517 Commits

Author SHA1 Message Date
Randy Mackay 2398b5dec4 Copter: guided consumes set-pos-target-local-ned Z-axis as offset from origin 2020-09-01 10:27:18 +10:00
Randy Mackay afa810041b Copter: 4.0.4-rc4 release notes 2020-08-28 09:37:59 +09:00
Iampete1 c265a38344 Copter: add gripper release FS_Option 2020-08-26 17:58:24 +09:00
Peter Barker afa153fb6f Copter: remove wrapper for get_avoidance_adjusted_climbrate
Only the modes are interested in this - there's no point having it on
the Copter object.
2020-08-22 08:31:25 +09:00
Randy Mackay 315d9da138 Copter: add ekf alt pre-arm and mode init checks 2020-08-20 12:41:40 +09:00
Siddharth Purohit 9b9954aa46 Copter: move to using CANManager library 2020-08-19 17:31:09 +10:00
Peter Barker 38122eb35e ArduCopter: use an enumeration for the AP_Avoidance recovery action 2020-08-19 11:38:19 +10:00
Hwurzburg 8484e8271f Copter: fix init of RC option 52 2020-08-18 18:55:29 +10:00
Hwurzburg 08e89b0b96 Copter: Add RC option for ACRO mode in Copter 2020-08-18 12:22:46 +09:00
Peter Barker 76e5ae9b41 Copter: move mavlink set-position defines into mavlink library 2020-08-11 09:52:52 +09:00
Randy Mackay 9e06b78fda Copter: minor formatting fix 2020-08-10 09:34:28 +09:00
Josh Welsh de9e9b90e5 Copter: Tradheli servo_test fix 2020-08-10 09:16:44 +09:00
Peter Barker 66e0afedb2 Copter: correct motor test order parameter description 2020-08-10 09:18:05 +10:00
Michael du Breuil 376494027b Copter: Support higher resolution percent based motor tests 2020-08-09 13:47:48 +10:00
Randy Mackay 48d27e1016 Copter: fixup winch comment 2020-08-07 21:55:07 +09:00
Randy Mackay 09bf76d9a4 RC_Channel: correct winch switch comment 2020-08-07 21:55:07 +09:00
Randy Mackay a2224f066a Copter: winch enabled with hal-minimize-features 2020-08-07 21:55:07 +09:00
Randy Mackay 54b714a24e Copter: implement send_winch_status 2020-08-07 21:55:07 +09:00
Randy Mackay f607ff28b3 Copter: integrate winch arming checks 2020-08-07 21:55:07 +09:00
Randy Mackay 925f76c048 Copter: integrate winch changes
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
2020-08-07 21:55:07 +09:00
Randy Mackay 6ea3c2a091 Copter: compile fix for winch 2020-08-07 21:55:07 +09:00
Peter Barker d87986ecdd Copter: move set_throttle_takeoff implementation into Mode
No callers except the mode objects, so move it.
2020-08-05 08:23:03 +09:00
Mark Whitehorn 8325de0845 Copter: default RC_OPTIONS to 0 for tradheli 2020-08-04 10:26:45 +10:00
Andy Piper 54c3d07547 Copter: make make/gimbal configurable on a per-board basis 2020-08-04 09:18:14 +10:00
Dr.-Ing. Amilcar do Carmo Lucas 5fad6ddddb Copter: fix typos in PL dataflash logs field description text 2020-08-04 08:14:29 +09:00
Dr.-Ing. Amilcar do Carmo Lucas be963bbdf9 Copter: fix units and multipliers in PL dataflash logs message 2020-08-04 08:14:29 +09:00
Randy Mackay 30c8d7bf40 Copter: dev option so set-attitude-target thrust field used as thrust 2020-08-01 08:32:23 +09:00
Randy Mackay 3c9a16d8a7 Copter: 4.0.4-rc3 release notes 2020-07-30 09:40:46 +09:00
Peter Barker 73526c0256 Copter: pass reason through in set_mode AP_Vehicle override
Other vehicles seem to do this correctly.
2020-07-28 09:10:38 +09:00
Peter Barker ac6cf1132c Copter: add documentation for DU16 message 2020-07-24 09:37:28 +09:00
Leonard Hall de8439dc3a Copter: crash check reqs 15deg lean and under 10m/s
pair programmed with rmackay9@yahoo.com
2020-07-20 12:49:53 +09:00
Michael du Breuil 08f8a41ecb Copter: Support DO_LAND_START as an adhoc MAVLink command 2020-07-17 09:15:05 +09:00
Mirko Denecke 89d423556c ArduCopter: update_trigger() is now called in AP_Camera update() 2020-07-15 08:37:28 +09:00
Andy Piper 12c9578a66 Copter: add in additional acro options
Air-mode for multicopters
Rate only for multicopters and trad-heli
if air-mode aux switch is toggled in acro do not reset air-mode on exit
2020-07-14 15:54:24 +09:00
murata a783763f5a Copter: Crash origin to crash message
Copter: Crash origin to crash message
2020-07-11 08:35:29 +09:00
murata c9990cdecc Copter: Change Need 3D Fix message. 2020-07-11 08:33:55 +09:00
Michael du Breuil c971fe0ca4 Copter: Support MAV_CMD_DO_REPOSITION on COMMAND_INT 2020-07-07 10:34:19 +10:00
Peter Barker b64a34fc38 Copter: add GENERATOR_STATUS to STREAM3 2020-07-03 08:21:42 +09:00
Peter Barker a679cd9b92 Copter: add support for AP_Generator 2020-07-03 08:21:42 +09:00
Randy Mackay dfbb357aaf Copter: minor formatting fix 2020-06-24 21:26:30 +09:00
Randy Mackay 0f6e2b6960 Copter: fix GUID message scaling for pos and velocity 2020-06-24 21:26:30 +09:00
Randy Mackay ac21becb6a Copter: simplified update of ekf terrain height stable setting 2020-06-24 21:16:50 +09:00
Randy Mackay 980c1f5020 Copter: update ekf terrain height stable setting
setting is true only when taking off or landing and horizontal speed is no more than 0.5m/s
2020-06-24 21:16:50 +09:00
Andy Piper 25dcc1a623 Copter: add support for individually tracking fft peaks and motor rpms with harmonic notches
log harmonic notch even if FFT is disabled. Fallback to throttle notch for BLHeli
move harmonic notch update to AP_Vehicle
2020-06-21 19:09:35 +10:00
Iampete1 e797685771 Copter: add set guided mode angle for scripting 2020-06-19 10:09:35 +10:00
Andy Piper 8d2f2443a2 Copter: add air mode aux function 2020-06-16 20:30:26 +10:00
Peter Barker 0eb03ba7d5 Copter: make SuperSimple type-safe 2020-06-16 19:39:42 +10:00
Randy Mackay d35643a372 Copter: 4.0.4-rc2 release notes 2020-06-16 14:17:12 +09:00
Peter Barker a629e91f30 ArduCopter: rename 'enum aux_switch_pos_t' to 'enum class AuxSwitchPos' 2020-06-12 08:11:46 +10:00
Andrew Tridgell 2cd5519d5d Copter: rename 2D rotation functions
drop the rotate prefix
2020-06-04 09:49:52 +10:00