Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-07 00:18:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
5,922 Commits 71 Branches 510 Tags 770 MiB
697c386075
Commit Graph

638 Commits

Author SHA1 Message Date
Andrew Tridgell
697c386075 Plane: use correct throttle range in slewrate 2012-11-28 11:42:05 +11:00
Andrew Tridgell
845dd88091 Plane: make THR_SLEWRATE docs clearer 2012-11-28 11:41:39 +11:00
Andrew Tridgell
92cd631ce5 Plane: added THR_PASS_STAB parameter 
this allows direct passthru of throttle in STABILIZE and FBWA, which
is useful for nitro planes wher you have a throttle cut switch that
drops the throttle below normal minimum.
 2012-11-26 23:33:05 +11:00
Andrew Tridgell
1059ef2a54 Plane: fixed secondary aileron and manual aux servos in failsafe 
the servo value wasn't being written to APM_RC while in failsafe for
these aux channels
 2012-11-26 23:32:57 +11:00
Andrew Tridgell
a87394fff2 Plane: don't do accel calibration in HIL mode 
this should fix the hang on startup
 2012-11-25 21:53:37 +11:00
Andrew Tridgell
56e4cbfb1d Plane: allow reboot on APM1, and add reboot to main CLI menu 2012-11-24 18:20:37 +11:00
Andrew Tridgell
f8a95e4084 APM: preparing for 2.67 release 2012-11-21 22:28:30 +11:00
Andrew Tridgell
84300c85d6 APM: make it possible to run the CLI on any serial port 2012-11-21 21:41:34 +11:00
Andrew Tridgell
704da2a5d9 MAVLink: make it possible to enter the CLI over the radio 
this only works on the APM2, where UART0 is also the radio port
 2012-11-21 14:11:05 +11:00
Andrew Tridgell
8f108e2eb3 APM: added AMP_OFFSET option 
thanks to Alexey Kozin!
 2012-11-21 13:34:27 +11:00
Andrew Tridgell
61f2e18e2e APM: allow ailerons to move fully during servo demo 2012-11-21 13:34:27 +11:00
Andrew Tridgell
fcbd3a823b APM: added a new type of auxilary aileron, with rc input 
a AileronWithInput assumes you have setup your RC transmitter to give
the right trim and input on the secondary aileron
 2012-11-21 13:34:26 +11:00
Michael Oborne
a5e3ce4655 remove cli planner mode - no longer used 2012-11-21 07:45:45 +08:00
Andrew Tridgell
a600ccece5 APM: support 16 character parameter names 2012-11-20 21:36:13 +11:00
Andrew Tridgell
a5ed0de2cf APM: set MANUAL_LEVEL to 1 on successful accel calibration 2012-11-20 19:27:52 +11:00
Andrew Tridgell
fd3993287d INS: disable accel calibration on the 1280 
this would put us well over 128k in sketch size
 2012-11-20 18:41:04 +11:00
Andrew Tridgell
2f287846b5 APM: don't use mavlink msgs for accel cal in cli 2012-11-20 18:32:27 +11:00
Andrew Tridgell
3aeaf2ece6 APM: k_param_imu is now unused 2012-11-20 18:32:27 +11:00
Andrew Tridgell
69fbcc8683 MAVLink: fixed accel and gyro sensor offsets in MAVLink 2012-11-20 18:32:26 +11:00
Andrew Tridgell
f80783665f APM: fixed throttle display to always be between 0 and 100 
when rc3 is below RC3_MIN, don't give an invalid value
 2012-11-20 13:50:19 +11:00
Andrew Tridgell
7b733cd12b APM: fixed altitude_filter for new LowPassFilter syntax 2012-11-19 08:09:44 +11:00
Andrew Tridgell
8d1905a40b APM: change WIND direction to match convention 
Thanks to Leo Hogg for pointing this out
 2012-11-19 07:16:47 +11:00
Andrew Tridgell
531e62d3b5 MAVLink: improve usefulness of logged GPS velocities 
we need them to align with time to use them for accelerations
 2012-11-17 17:45:30 +11:00
rmackay9
cdfd3f9ccc ArduCopter, ArduPlane: rename ap variable in GCS_Mavlink.pde to resolve compiler warning re shadowing of variable 'ap' 
Changed ArduPlane to keep function consistent with ArduCopter
 2012-11-12 13:30:04 +09:00
Andrew Tridgell
fddfb0b1a3 MAVLink: update compass health in SYS_STATUS 
this will make it easier to tell if a I2C error occurred in flight
 2012-11-12 11:26:54 +11:00
rmackay9
2df7a407da ArduPlane: fix HIL build 2012-11-07 21:23:07 +09:00
rmackay9
d9b4407e64 AP_InertialSensor: changes after review with Tridge. 
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
 2012-11-07 19:21:15 +09:00
rmackay9
ef727bbb3c ArduPlane: move to use new INS library instead of IMU library 2012-11-07 19:21:03 +09:00
Andrew Tridgell
8652bfee8d APM: added RSSI_PIN option for receiver RSSI 
this allows you to configure the pin for receiver RSSI without
recompiling
 2012-11-06 22:04:41 +11:00
Andrew Tridgell
c7b47a0e47 APM: allow for arbitrary ranges and reversal on 2nd aileron 
this ensures you can setup a 2nd aileron with different reversal from
main aileron
 2012-11-05 23:37:58 +11:00
Andrew Tridgell
9c140356f5 APM: remove unused variable 2012-11-05 15:22:56 +11:00
Andrew Tridgell
2793e432ff APM: use raw GPS velocity in GLOBAL_POSITION_INT 
a much more useful value to log
 2012-11-05 14:58:40 +11:00
Andrew Tridgell
aa236c43f8 APM: prepare for 2.66 2012-10-31 13:25:19 +11:00
Andrew Tridgell
81d507d39e APM: fixed differential spoilers in manual mode 
make them follow the elevons
 2012-10-31 12:43:53 +11:00
Andrew Tridgell
8c0296b27a APM: fixed additional aileron channels in manual mode 2012-10-31 12:43:53 +11:00
Xichen Shi
8c46fced16 APM: Added functionality to use differential spoilers in elevon mode 
spoiler 1 and 2 are connected to 2 auxiliary channels, functions are
set to 16 on left wing and 17 om right wing respectively. Worked in
FBW + mode (auto etc.). No manual mode supported yet (need more
channels in my case).
 2012-10-31 12:43:42 +11:00
Andrew Tridgell
e479af67ff APM: fixed loiter radius docs to reflect new limit 2012-10-30 16:19:24 +11:00
Pat Hickey
d4bb8a10d7 Update ArduCopter and ArduPlane dependencies on AP_Menu 2012-10-18 20:53:39 -07:00
Andrew Tridgell
07c291bb73 APM: fixed a comment typo 2012-10-16 17:21:04 +11:00
Andrew Tridgell
f828956cb8 battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
rmackay9
775489d658 ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor 2012-10-13 20:51:41 +09:00
Andrew Tridgell
0bc1f89f27 APM: fixed typo 2012-10-11 15:03:52 +11:00
Andrew Tridgell
c9f10f0e00 APM: fixed auto-takeoff with zero lat/lng 
consider a non-zero altitude to mean that we should use the relative
altitude specified
 2012-10-11 15:03:00 +11:00
Andrew Tridgell
0495a0debc APM: make error msg clearer 2012-10-11 11:51:24 +11:00
rmackay9
f695db61ea ArduPlane: added AP_Semaphore.h to list of includes 2012-10-06 13:14:28 +09:00
Michael Oborne
a38fef65c7 AP,AC Add ability to override an altitude in any auto mode, on the current active target 2012-09-30 07:29:33 +08:00
rmackay9
8c6fd340d7 AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9
41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
Andrew Tridgell
bbec662483 APM: fixed build warning 2012-09-25 07:21:03 +10:00
Andrew Tridgell
fbc053e6e4 APM: change to one low priority status buffer per GCS instance 
this allows us to operate the low priority messages on each link
independently.

Thanks to David Buzz for the suggestion!
 2012-09-24 17:39:19 +10:00