Commit Graph

140 Commits

Author SHA1 Message Date
Rimvydas Naktinis df922dacfa Plane: Suppress throttle when parachute release initiated, not after release. 2016-04-21 09:53:22 -07:00
Andrew Tridgell e9e43dc016 Plane: added Q_VFWD_GAIN for forward motor in VTOL modes
this allows for velocity control using the forward motor in VTOL modes
2016-04-20 16:25:19 +10:00
Andrew Tridgell 97a7192f76 Plane: make it more obvious that AUTO_FBW_STEER is not for normal use 2016-04-06 07:58:23 +10:00
Andrew Tridgell f4ccf94dfc Plane: added QLAND mode
for VTOL landing. Use for failsafe as well
2016-03-09 18:20:41 +11:00
Tom Pittenger 75be40ea59 Plane: add LAND_THR_SLEW 2016-03-02 10:54:19 -08:00
Tom Pittenger ed6aa4ed17 Plane: added throttle limiting via max power (current*voltage) 2016-03-02 10:20:44 -08:00
Tom Pittenger 993e5b438c Plane: add to LAND_NEUTRL behavior
offer netrual vs disabled outputs
2016-02-25 05:51:44 -08:00
Tom Pittenger 0b26a34f22 Plane: new param LAND_THEN_NEUTRL
// @Description: When enabled, after an autoland and auto-disarm via LAND_DISARMDELAY happens then set all servos to neutral. This is helpful when an aircraft has a rough landing upside down or a crazy angle causing the servos to strain.
2016-02-16 23:40:44 -08:00
Andrew Tridgell 8ecf54bf75 Plane: use throttle slew when in quadplane assisted flight
this prevents a sudden throttle change on a petrol motor when
transitioning
2016-02-13 11:38:33 +11:00
Tom Pittenger fa53263ca9 Plane: make throttle_percentage() signed 2016-02-11 18:46:01 +11:00
Tom Pittenger 2e92089ce6 Plane: Reverse Thrust
Reverse thrust for controlled landings, even with much steeper approach slopes. This is achieved by allowing throttle demand to go negative to maintain a target airspeed. A Pre-Flare stage was added, triggered by an altitude, to allow for a slower airspeed just before land. That lower airspeed can be near stall.
new params LAND_PF_ALT, LAND_PF_SEC, LAND_PF_ARSPD, USE_REV_THRUST
2016-02-09 14:18:02 +11:00
Tom Pittenger 1cb094f12e Plane: make throttle signed (pos and neg) 2016-02-09 14:18:02 +11:00
Tom Pittenger b8d5369ebd Plane: add flight stage LAND_PREFLARE 2016-02-09 14:18:02 +11:00
Andrew Tridgell 418464ab8c Plane: added quadplane version of is_flying() 2016-01-09 07:38:53 +11:00
Andrew Tridgell 5e784ddb5c Plane: consider flying status for throttle_wait 2016-01-09 07:38:53 +11:00
Andrew Tridgell 0d6b353bcb Plane: added quad assistance and auto support for quadplane 2016-01-09 07:38:52 +11:00
Andrew Tridgell 2983576067 Plane: added QLOITER mode
quadplane loiter
2016-01-09 07:38:52 +11:00
Andrew Tridgell ca85c332d6 Plane: separate QSTABILIZE and QHOVER modes 2016-01-09 07:38:52 +11:00
Andrew Tridgell 6468fc6d93 Plane: Initial implementation of quadplane
adds "HOVER" mode
2016-01-09 07:38:52 +11:00
Lucas De Marchi 8eb0b559f2 ArduPlane: avoid comparison between signed and unsigned 2015-12-01 16:28:18 -02:00
Lucas De Marchi 2591261af6 Global: rename min and max macros to uppercase
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.

Changes generated with:

	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
2015-12-01 16:28:09 -02:00
Luis Vale Gonçalves b7f3782e4e Plane: Text revisions
text revisions
2015-11-26 07:56:52 +11:00
lvale e18181e5c2 Plane: Uniformization of severities
Plane uniformization of severities
2015-11-09 09:38:25 +11:00
Lucas De Marchi 84da1f5039 Rename gcs_send_text_P to gcs_send_text 2015-10-30 14:35:07 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Andrew Tridgell d20b86b95e Plane: suppress the throttle in auto-throttle modes after parachute release 2015-10-27 16:06:34 +11:00
Andrew Tridgell d019f83bee Plane: allow for higher roll limits on takeoff
only restrict to LEVEL_ROLL_LIMIT below 5m. Above that start to allow
larger roll limits, reaching the full roll limit at 15m
2015-09-17 15:35:37 +10:00
Andrew Tridgell d43d070e75 Plane: ensure throttle reverse is obeyed in all states
need to use radio_max for failsafe if reversed
2015-09-14 09:42:20 +10:00
Andrew Tridgell 5c055220f5 Plane: cope with bad values of ARMING_REQUIRE 2015-09-14 09:35:53 +10:00
Andrew Tridgell 036e1fff12 Plane: a bit more caution in unsuppressing throttle pre-takeoff
require reasonable pitch and definate gps movement. This errs on the
side of not overriding a takeoff command, which could be dangerous
2015-09-09 09:24:54 +10:00
Tom Pittenger fe083c8ffa Plane: consider extended launch throttle delays
use the greater of takeoff_throttle_delay+2s or 5s
2015-09-09 09:14:59 +10:00
Tom Pittenger 4f46c5331a Plane: added time for flying in any mode
- previously we only kept track of starting flying while in auto which gets reset when switching in and out of auto and on takeoff/land. Now we keep track of a "global" one that will track the is_flying flag regardless of the flight mode.
2015-09-09 09:14:59 +10:00
Tom Pittenger a3c51698cb Plane: fix throttle when restarting mission in-flight with takeoff
fixes https://github.com/diydrones/ardupilot/issues/2778
When executing a takeoff, and the throttle is suppressed, but we're already flying, we should unsuppress the throttle. We can get into this situation if we reset the mission in-flight.
2015-09-09 09:14:59 +10:00
Tom Pittenger 25da4ec0ea Plane: added flight stage FLIGHT_LAND_ABORT and abort mechanism
- enabled via new param LAND_ABORT_THR default is 0 (disabled)
- Triggered via 95% throttle during landing, a landing abort will take place.
- This copies all takeoff params for right now, we can make this better later if needed
- added mission item command to NAV_LAND which is the abort takeoff altitude. If 0 then use last takeoff if available, else use 30m
- hold heading, just like takeoff, until altitude is reached
- pitch is constrained to takeoff pitch, or else 10deg if not available
- After abort altitude is reached, the normal landing restart happens (DO_LAND_START or decrement mission)
- restart landing by jumping to DO_LAND_START or decrement mission on mode change
2015-09-09 09:04:24 +10:00
squilter 583c087eca Plane: update severities 2015-08-28 10:04:35 +10:00
Andrew Tridgell cc96f80f02 Plane: make TRAINING mode obey stall prevention roll limits
Fixes issue#2014
2015-08-14 13:36:21 +10:00
Andrew Tridgell 6c07795b63 Plane: added HIL_SUPPORT define
disable HIL support on APM2 to save flash space
2015-07-30 11:04:31 +10:00
Przemek Lekston 4b38d444dd Plane: fix default behaviour of flaps. 2015-07-23 15:28:08 +10:00
Andrew Tridgell d5c5400e76 Plane: added support for ALTITUDE_WAIT mission command 2015-06-15 09:20:55 +10:00
Andrew Tridgell 18c37935c9 Plane: convert from .pde to .cpp files 2015-05-21 07:48:52 +10:00