Andrew Tridgell
6213032957
MAVLink: removed obsolete files
2012-08-09 15:25:49 +10:00
Andrew Tridgell
5d1d9e9042
MAVLink: added generator.sh script
...
this is used to re-generate our MAVLink C code
2012-08-09 15:25:06 +10:00
Andrew Tridgell
dc47074dbd
MAVLink: removed the need for Mavlink_compat.h
...
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
2012-08-09 12:22:46 +10:00
Andrew Tridgell
2a7b298bbc
MAVLink: moved mavlink variables back to library
...
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
2012-08-09 12:06:21 +10:00
Amilcar Lucas
0b0b9c29a2
Allow fully independent operation of two AP_Mount instances
2012-08-08 23:11:23 +02:00
Amilcar Lucas
530ea0bebd
AP_Mount: Enable Joystick speed code, now that the framework supports more than 16 parameters per group.
...
Save some bytes by skiping the redundant *_rc_in initialization in the AP_Mount() constructor
2012-08-08 22:45:36 +02:00
Andrew Tridgell
a8c99f3887
SITL: fixed deletion of eeprom.bin
...
with the new AP_Param constructor order, we need to erase rather than
unlink the eeprom
2012-08-08 18:01:06 +10:00
Andrew Tridgell
dcc50b5705
AP_Airspeed: removed values passed to constructor
2012-08-08 16:38:39 +10:00
Andrew Tridgell
e6e25525bc
AP_Param: avoid saving values within 0.01% of the default value
...
this saves some more space due to rounding errors
2012-08-08 13:13:30 +10:00
Andrew Tridgell
45c27317ef
AP_Mount: fixed defaults for angles
...
this saves some eeprom space by not saving the 4500 values
2012-08-08 13:04:49 +10:00
Andrew Tridgell
8ae35cae1c
AP_Math: rename get_bearing() to get_bearing_cd() to make units obvious
2012-08-08 12:12:30 +10:00
Andrew Tridgell
7ff7514a88
SITL: added pgm_read_dword() and pgm_read_float()
2012-08-08 12:11:57 +10:00
Andrew Tridgell
518d6365ff
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Andrew Tridgell
898a5af692
AP_Param: update AHRS for new constructor syntax
2012-08-08 12:11:57 +10:00
Andrew Tridgell
5e8fe8d93e
AP_Param: update PID libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Andrew Tridgell
c298d5130f
AP_Param: major update to use default values in var_info table
...
this stores the default value for all scalar variables in the var_info
table, which makes it possible to avoid storing default values in
eeprom. That allows us to oversubscribe the eeprom space with a much
lower risk of overrun.
2012-08-08 12:11:57 +10:00
Andrew Tridgell
a7b9aff79f
AP_Baro: the DerivativeFilter now handles duplicate data
...
this saves a few bytes of memory
2012-08-08 12:07:36 +10:00
Andrew Tridgell
77f3b60b6f
Filter: make the DerivativeFilter test GNUPlot friendly
...
makes testing easier
2012-08-08 12:07:36 +10:00
Andrew Tridgell
899eeb608b
Filter: automatically cope with duplicate timestamps
...
this makes it easier for callers to avoid excessive slope calculations
Thanks to Jon Challinger for the idea
2012-08-08 12:07:35 +10:00
Andrew Tridgell
d7d33c64b7
Filter: fixed a off-by-one DerivativeFilter bug
...
many thanks to Jon Challinger for noticing this!
2012-08-08 12:07:35 +10:00
Amilcar Lucas
2c4a0636f3
AP_Mount: move mount to a "retracted position" into the fuselage with a fourth servo
2012-08-06 01:27:29 +02:00
Amilcar Lucas
107155fa1a
AP_Mount: Allow using any RC channel to control any of the mount axes.
...
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
2012-08-05 23:48:57 +02:00
Amilcar Lucas
b8c7b8a786
RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls.
2012-08-05 23:08:31 +02:00
Amilcar Lucas
9c1ac2d9e6
More work on ch9, 10 and 11
2012-08-04 19:44:41 +02:00
Amilcar Lucas
bbc4bdb729
More flexible RC support
2012-08-04 18:39:20 +02:00
Andreas M. Antonopoulos
7262b0429a
AP_Limits: experimental "bounce" mode.
2012-07-31 18:39:58 -07:00
Robert Lefebvre
4ffc5e211a
Fixing Trad Heli Ext ESC Controller
...
-Added ramp-down rate instead of instantly setting ramp to zero when throttle is dropped to bottom. This is to allow "warm-restart" if shutdown was unintentional.
-Actual ESC still goes to zero while throttle is dropped to the bottom, only the ramp counter winds down slowly behind the scenes.
2012-07-31 17:47:25 -04:00
rmackay9
5077674043
AP_InertialSensor_MPU6000: another attempt at fixing the SITL build
2012-07-28 17:19:19 +09:00
rmackay9
7683e9d870
AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully)
...
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
2012-07-28 16:33:04 +09:00
rmackay9
0eaf427062
AP_AHRS_MPU6000: cleaning up compiler warning due to unused yaw_deltat variable
2012-07-28 16:23:25 +09:00
rmackay9
48074f4766
AP_InertialSensor_Oilpan: changed initialisation order of parameters to remove compiler warning
2012-07-28 15:22:37 +09:00
rmackay9
1b521a9f73
AP_AHRS: updated test sketch to allow use of MPU6000's DMP
2012-07-28 14:27:26 +09:00
rmackay9
dbe7c8ed1a
AP_AHRS_MPU6000: first draft implementation of class that uses MPU6000's DMP to calculate attitude
2012-07-28 14:17:38 +09:00
rmackay9
b844bb7919
AP_AHRS: removed var_info from AP_AHRS class (moved to AP_AHRS_DCM)
2012-07-28 14:16:56 +09:00
rmackay9
468170b589
AP_AHRS_DCM: moved var_info to belong to AP_AHRS_DCM instead of AP_AHRS
2012-07-28 14:16:15 +09:00
rmackay9
7b9782c5ac
AP_IMU_INS: added gx(), gy() and gz() methods to return gyro offsets
2012-07-28 14:15:23 +09:00
rmackay9
6cd0918134
AP_InertialSensor: methods added to access DMP functionality
2012-07-28 14:14:43 +09:00
Andrew Tridgell
4b4b67496b
MAVLink: rename the message_definitions directory
2012-07-26 10:03:36 +10:00
Andrew Tridgell
8dd62829f9
MAVLink: removed MAVLink 0.9 message definitions
...
we are now 1.0 only
2012-07-26 10:03:36 +10:00
rmackay9
bb05dab924
AP_Mount: addition of Amilcar's mount_type
...
set_roi_cmd modified to take a Location. I know the intention was for set_roi_cmd to interpret the MAVLink command directly but unfortunately in arduCopter missions are only made up of waypoints (which are Locations).
2012-07-25 11:00:38 +09:00
Jonathan Challinger
9cd98e79dd
AHRS: normalise GA_b before computing error vector only if too large
...
When GA_b is small the direction of the vector is unreliable, so
normalising can exacerbate the error in the direction
2012-07-23 17:16:50 +10:00
Andrew Tridgell
175b6d2606
AP_AnalogSource: fixed reporting of VCC
...
the VCC pin number should not be converted
2012-07-21 19:49:24 +10:00
Andrew Tridgell
5f5ab9c07c
AHRS: if we don't have gps correction enabled, zero the yaw correction
2012-07-20 17:21:04 +10:00
Andrew Tridgell
c937738732
AHRS: allow the gps/accelerometers to control yaw when rolled
...
this solves a problem with yaw estimation when at high roll angles,
when the compass code becomes ineffective
2012-07-20 11:50:04 +10:00
Andrew Tridgell
151a50b6af
MAVLink: imported updated generated mavlink C code
...
no functionality changes
2012-07-20 11:50:03 +10:00
Jason Short
c9d3ab5413
Oilpan ADC parameters added
...
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
2012-07-18 22:57:11 -07:00
Jason Short
148da2e4a0
Lead Filter: simplified calculation
2012-07-18 22:57:10 -07:00
Andrew Tridgell
819b6459b2
GPS-UBlox: removed duplicate config messages
...
these were left over from debugging
2012-07-19 15:23:15 +10:00
Amilcar Lucas
3de23220ed
RC_Channel parameters: Fix a typo
2012-07-18 22:39:49 +02:00
Amilcar Lucas
22d2f9ea15
Support up to 7 aux servo outputs
2012-07-18 21:58:22 +02:00
