Commit Graph

6809 Commits

Author SHA1 Message Date
Ryan Beall 592201d831 CI fix Soaring channel 3 check timeout 2022-06-30 20:06:33 +10:00
Ryan Beall 5a26635aca CI fix Climb before turn Timeout again 2 2022-06-30 20:06:33 +10:00
Ryan Beall 69ffac890f CI fix Climb before turn Timeout again 2022-06-30 20:06:33 +10:00
Ryan Beall 2b9d116274 CI fix Climb before turn Timeout 2022-06-30 20:06:33 +10:00
Ryan Beall ae6295e11c CI fix RTL Timeout 2022-06-30 20:06:33 +10:00
Peter Barker 043764fbf9 autotest: use set_parameters in rover; fixup tests to use context 2022-06-30 11:55:19 +10:00
Tom Pittenger 1c9c1d7207 AP_Bootloader: add target SkystarsH7HD 2022-06-30 11:08:51 +10:00
Peter Barker bc12a61c9a autotest: use slightly faster recv_msg call in drain_mav
Cuts out some code in pymavlink's recv_match which we don't need here.  We even explicitly don't run the idle hooks which pymavlink supplied when we're running under drain_mav
2022-06-30 09:46:13 +10:00
Peter Barker 208554d402 autotest: correct diagnostic message 2022-06-29 21:03:42 +10:00
Peter Barker f6816f38dc autotest: add timeout in drain_mav
At large speedups we can create more telemetry than we can consume.  Detect that and raise an exception, assuming we should be able to drain anything within 2 minutes
2022-06-29 21:03:42 +10:00
Peter Barker ef0f5110cb autotest: set Rover speedup to 30
This is closer to what's achieved on modern CPUs.

Running at 100 can lead to very rapid RC inputs which can cause issues.
2022-06-29 21:02:27 +10:00
Peter Barker b6f7887182 Tools: remove non-functional FRSKY_TELEM_ENABLED define 2022-06-29 10:59:50 +09:00
Peter Barker 67aa9ecdd4 Tools: adjust for when LTM telemetry is disabled 2022-06-28 20:19:41 +10:00
Peter Barker c19549c3a9 Tools: add AP_LTM_TELEM_ENABLED 2022-06-28 20:19:41 +10:00
TunaLobster 2abf2702ce Tools: Add flake8 check to PrintVersion.py 2022-06-28 13:16:24 +10:00
TunaLobster e77ab54de1 Tools: Improved flake8 speed, ignore, and exclude 2022-06-28 13:16:24 +10:00
李孟晓 ff7832510d Tools: add ICP101XX options to build_options.py 2022-06-28 11:59:04 +10:00
Andy Piper 1b2043edac AP_Bootloader: add Foxeer Reaper F745 v2 2022-06-28 11:03:26 +10:00
Andy Piper 746e1621b5 bootloaders: add Foxeer Reaper F745 v2 2022-06-28 11:03:26 +10:00
Peter Barker 554f20ddb1 Tools: configure_all.py: clarify command-line --stop option
This just makes it fatal on any command...
2022-06-28 08:18:27 +10:00
Andrew Tridgell a554ac3500 Tools: added log scale option to FilterTool 2022-06-26 18:08:32 +10:00
Andrew Tridgell 7b8da9385d Tools: load FLTD from RLL_FLTD in FilterTool 2022-06-26 18:08:32 +10:00
Andrew Tridgell 2b03c49b49 AP_Bootloader: sync 6C board ID with px4 bootloader 2022-06-23 13:43:38 +10:00
Andrew Tridgell 40cfebd202 Tools: updated Pixhawk6C bootloader 2022-06-23 13:43:38 +10:00
Andrew Tridgell 7997029893 Tools: added Pixhawk6C bootloader 2022-06-23 12:37:24 +10:00
Randy Mackay 66f1603aea Tools: autotest default params for sub use MNT_RC_RATE 2022-06-21 13:37:11 +09:00
Randy Mackay 65d8cff1f2 Tools: LogAnalyzer checks MNT_RC_RATE 2022-06-21 13:37:11 +09:00
Randy Mackay 1a5216aaee Tools: autotest for mount sets MNT_RC_RATE 2022-06-21 13:37:11 +09:00
Peter Barker 71a4d24e72 Tools: add rangefinder backends to custom build server options 2022-06-21 09:15:20 +10:00
Andrew Tridgell 3a6b153d55 Tools: added filter tool to web-firmware
makes it easier others to PR changes to improve the tool
2022-06-18 09:34:50 +10:00
Peter Barker 08ae4f050c autotest: fix race condition in button test
The subsequent test could end up arming the vehicle based on this left-over state.
2022-06-16 21:24:31 +10:00
Peter Barker 4a015bd479 autotest: fix race condition in mission-end-behaviour test 2022-06-16 21:24:31 +10:00
Peter Barker 57b0d7f235 autotest: change rover default speedup time to 100 2022-06-16 21:24:31 +10:00
Peter Barker b150c48b5c Tools: add --no-run-with-defaults option to test-build-options script 2022-06-16 17:20:06 +10:00
Peter Barker 7120d4f750 autotest: fix race condition in need-ekf-to-arm check
At extreme speedups we may not detect the reboot in the Python before the autopilot is ready to arm...
2022-06-16 14:53:21 +10:00
Peter Barker 39a0ecbb4b autotest: check rate is configured after we do the rate check
This is just to make sure that the autopilot isn't losing the configuration somehow.
2022-06-16 10:04:08 +10:00
Peter Barker 6fcdea67c3 autotest: tidy hover_and_check_matched_frequency method
- remove pointless elses
 - clarify why a test is failing in exception messages
 - move variable definitions closer to their use
2022-06-15 19:07:34 +10:00
Andrew Tridgell 5a36d7cf0a AP_Periph: fixed non-contiguous mask for ESC telem output
this fixes the case where a peripheral node has an ESCs that are not
starting at the first channel. Reported here:

https://discuss.ardupilot.org/t/using-matekl431-adapters-for-pwm-and-dshot/85781/22

tested on MatekL431-Periph
2022-06-15 18:16:22 +10:00
Randy Mackay e55fa6ad92 Tools: add build_options for individual mount drivers 2022-06-15 18:08:58 +10:00
Andrew Tridgell 7e4da1ef85 Tools: added Pixhawk6X bootloader 2022-06-15 17:28:40 +10:00
Andy Piper f828c690e7 bootloaders: add MambaF405-2022 bootloaders 2022-06-15 17:05:41 +10:00
Andy Piper 3db079d15c Tools: add MambaF405 2022 MK4 2022-06-15 17:05:41 +10:00
Randy Mackay e0ce8035b9 Tools: arduroller balance bot param update 2022-06-15 08:40:12 +09:00
Peter Barker 0697ce19d2 autotest: tidy wait_disarmed 2022-06-15 09:11:51 +10:00
Peter Barker b18c597f0b autotest: fix race condition in arduplane.py fly_mission
We can lose the final message when we get_sim_time and wait_heartbeats and similar
2022-06-15 09:11:51 +10:00
Chuck Faber b657d54336 Tools/scripts: Add Sagtech MXS to custom build server 2022-06-14 07:10:17 -07:00
Tom Pittenger 0c7e107157 Tools/waf: Add Sagetech SDK to WAF build 2022-06-14 07:10:17 -07:00
Peter Barker 1b22de0dd9 autotest: fix race condition in deepstall tests 2022-06-14 08:16:03 +10:00
Peter Barker b550949766 autotest: scale SITL RC input according to speedup
Too slow when running at 100 times speedup
2022-06-13 21:41:41 +10:00
Peter Barker abc1b7b644 autotest: factor out extract_median_FTN1_PkAvg_from_current_onboard_log 2022-06-13 21:21:30 +10:00