Leonard Hall
93cff95448
Copter: remove loiter_nav from auto
2022-03-07 16:14:23 +09:00
Leonard Hall
fb6c3ebb72
Copter: auto and guided takeoff use postion controller
2022-03-07 16:14:23 +09:00
Andy Piper
11a5c8d2a4
Copter: nuke clang warnings
2022-03-03 16:34:14 +11:00
Shiv Tyagi
7765399e49
Copter: change circle_nav.set_radius to circle_nav.set_radius_cm
2022-03-01 09:31:10 +09:00
Randy Mackay
df5c3acdfe
Copter: fix nav_script_time timeout
2022-02-24 10:00:42 +09:00
Randy Mackay
1251a91430
Copter: add nav_script_time mission command support
2022-02-22 12:32:56 +09:00
Iampete1
23ea84bf32
copter: fix condition yaw early completion
2022-02-16 19:33:38 +09:00
Tatsuya Yamaguchi
6443bdcb2d
Copter: change variable type from float to int32_t
2022-01-31 16:09:54 +09:00
Rishabh
309dfa63f3
Copter: Switch PrecLand to use updated Pos Controller
2022-01-31 14:38:29 +09:00
Tatsuya Yamaguchi
3045451769
Copter: fix sanity checks for takeoff altitude
2022-01-27 09:23:43 +09:00
Randy Mackay
d5461f2225
Copter: integrate AP_Mission_ChangeDetector
2022-01-10 08:19:16 +09:00
Leonard Hall
8c7414e932
Copter: Constrain vertical speed in loiter_to_alt_run
2021-12-23 11:21:40 +09:00
Josh Henderson
3107c42fca
Copter: INAV rename for neu & cm/cms
2021-11-30 10:08:07 +11:00
Josh Henderson
6b871fba55
ArduCopter: inav funcs use _xy()
2021-11-30 10:08:07 +11:00
Tatsuya Yamaguchi
e9115601dd
Copter: reset land_repo_active flag in Auto mode
2021-09-28 21:17:45 +09:00
Leonard Hall
5d5ccc8c78
Copter: Update ACRO to use rate parameters and update expo function
2021-09-23 20:03:53 +09:00
Iampete1
ec5d5b4471
Copter: check for takeoff before continuing after land
2021-09-14 08:24:02 +09:00
Iampete1
f848917e1a
Copter: log entry and exit of Auto RTL pseudo mode
2021-09-07 09:35:35 +09:00
Leonard Hall
5fea74d4d0
Copter: Separate landing and terrain following.
2021-09-06 16:00:19 +09:00
Iampete1
09f1a3da8a
Copter: auto RTL: don't switch modes if already in auto
2021-08-31 08:40:08 +09:00
Randy Mackay
8102629dfb
Copter: refactor/rename precland methods
2021-08-30 14:08:44 +09:00
Rishabh
40adad743e
Copter: Disable Prec Land State Machine when Prec Land disabled
2021-08-30 14:08:44 +09:00
Rishabh
c5b98c3490
Copter: Support Prec Land State Machine
2021-08-23 15:00:56 +09:00
bnsgeyer
ca007ee6f6
Copter: Allow Tradheli to spoolup in guided or auto mode
2021-08-23 12:26:00 +09:00
Iampete1
b63cc809ce
Copter: add AUTO RTL pseudo mode, DO_LAND_START
2021-07-27 09:00:11 +09:00
Josh Henderson
2ba6ae6196
ArduCopter: mark get_wp() const
2021-07-13 08:05:25 +09:00
Leonard Hall
feae762e64
Copter: additional yaw modes and fixes
2021-07-10 20:25:05 +09:00
Andrew Tridgell
bada2670a6
Copter: update for new double precision position APIs
2021-06-24 21:34:30 +10:00
Andrew Tridgell
d89388c4cc
Copter: use cleaned up APIs
2021-06-24 20:28:45 +10:00
Leonard Hall
e294991b08
Copter: Fix before squash
2021-05-24 20:13:37 +10:00
Leonard Hall
4bae8f03a4
Copter: Use PosControl fixes
2021-05-24 20:13:37 +10:00
Pierre Kancir
4368629fb6
Copter: rename RTLState to SubMode
2021-05-12 17:50:47 +10:00
Pierre Kancir
f43e42f0b6
Copter: rename AutoMode enum to SubMode
2021-05-12 17:50:47 +10:00
Pierre Kancir
c4cc3659fc
Copter: make RTLState an enum class
2021-05-12 17:50:47 +10:00
Pierre Kancir
4987e54247
Copter: make AutoMode an enum class
2021-05-12 17:50:47 +10:00
Leonard Hall
726074be91
Copter: Support Thrust Vector based navigation
2021-04-27 17:13:55 +09:00
Tatsuya Yamaguchi
c42681f4f2
Copter: add exit() method to Mode class
2021-04-26 09:56:34 +09:00
Randy Mackay
6a98ad5a29
Copter: loiter-turns fix
2021-04-12 08:30:19 +09:00
Randy Mackay
96267553cf
Copter: auto detects mission changes
2021-04-03 12:07:59 +09:00
Randy Mackay
238d102a56
Copter: auto's wp_start skips submode change on terrain failsafe
2021-04-03 12:07:59 +09:00
Leonard Hall
328c0655e3
Copter: support for SCurves and position controller changes
...
wp_start provides next_dest_loc
send next_destination to wp_nav instead of setting fast_waypoint
fixup zigzag for S-curve changes
fixup guided
auto spline fixes
smart rtl rename of next_point to dest_NED
loc_from_cmd accepts default location
auto mode stops before starting land command
auto do_next_wp accepts default location
rename do_next_wp to set_next_wp
also rename get_spline_from_cmd argument
also improve failure to set next waypoint due to missing terrain data
also fixup comment in set_next_wp
also auto stops when moving from straight to spline segments
also auto mode spline fix
also auto mode calls AC_WPNav::set_spline_destination_next
Copter: AutoYaw provides rate from WPNav
2021-04-03 12:07:59 +09:00
Peter Barker
d387ad9921
Copter: have allows_arming take a AP_Arming::Method rather than bool from_gcs
...
This API predates us having the arming methods being passed around.
This makes the calls look like Plane
2021-03-30 09:00:26 +09:00
Josh Henderson
f65c4df358
ArduCopter: make Location(Vector3f) require ALTFRAME
2021-03-30 08:56:35 +09:00
Tatsuya Yamaguchi
0cce5699b2
Copter: change from control_mode to flightmode
2021-03-23 22:48:20 +11:00
Randy Mackay
1c350514ca
Copter: auto mode starts or updates mission from run method
2021-03-23 10:12:08 +09:00
Tatsuya Yamaguchi
ed8384b45a
Copter: add option to disable LANDING_GEAR
2021-03-17 10:41:11 +09:00
Randy Mackay
be29b23195
Copter: do-mount-control ignored if no mount
...
Co-authored-by: srirajshukla <srirajshukla@gmail.com>
Co-authored-by: Yash Vadi <yvadi9274@yahoo.com>
2021-03-16 10:07:16 +09:00
James O'Shannessy
d055d7a581
ArduCopter: Cleanup - removes autoenabling of fence with AC_Fence parameter
2021-03-05 14:52:46 +11:00
James O'Shannessy
f14e1c2799
ArduCopter: Ensure fence has opportunity to auto disable for landing
2021-03-05 14:52:46 +11:00
James O'Shannessy
a88f2721a8
ArduCopter: Use auto enable and auto disable from AC_Fence
2021-03-05 14:52:46 +11:00
James O'Shannessy
f228adfa75
ArduCopter: Improve auto-enable/disable of fence
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
92122e5133
Copter: automatically enable and disable floor fence on automated takeoff and landing
2021-03-05 14:52:46 +11:00
Patrick José Pereira
ad82e01270
ArduCopter: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Leonard Hall
5efe94a771
Copter: use AP_Math control functions
2021-01-20 18:19:40 +11:00
Randy Mackay
0b83d45163
Copter: verify land and payload place record flow-of-control internal error
2021-01-20 09:12:02 +09:00
Randy Mackay
b8c58bd900
Copter: payload place fixups
2020-12-05 08:35:03 +09:00
Michael du Breuil
f9b4e81702
Copter: Add ignore pilot yaw to guided, auto and RTL options
2020-11-19 07:22:54 +09:00
Randy Mackay
7a90ed4bb5
Copter: auto allows arming casts param to uint32_t
2020-10-20 23:04:45 +09:00
Randy Mackay
c1c9d87efe
Copter: move auto allows_arming in mode_auto.cpp
...
this should be a non-functional change
2020-10-20 23:04:45 +09:00
Randy Mackay
8b3cc0b255
Copter: fixup auto options
2020-10-01 08:48:06 +09:00
Michael du Breuil
50dfe3f197
Copter: Add AUTO_OPTIONS and support arming and throttle bypass
...
This allows you to arm the copter without any extra GCS commands while
in auto, and can be done from both the GCS, or the RC Tx. This is useful
for creating a simpler workflow.
This also allows you to set the auto_armed flag internally, which
bypasses the need to raise the throttle stick for the copter to start a
takeoff.
This exposed a problem where we would start running the controllers
before the EKF was at all initialized, if you switched into auto to
early. This now has a check that prevents us from running the mission
state machine until after the origin has been set. This was a suggestion
from @rmackay9.
When combined these options allow you to have the vehicle on the ground,
disarmed in auto with a takeoff waypoint loaded, then just arm the
aircraft and watch it takeoff. This is a feature we've had on quadplanes
for quite awhile now, and it has proven to be very nice for operators.
2020-10-01 08:46:29 +09:00
Randy Mackay
29a2be2d63
Copter: minor comment fix
2020-09-09 15:32:37 +09:00
Randy Mackay
925f76c048
Copter: integrate winch changes
...
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
2020-08-07 21:55:07 +09:00
Andy Piper
54c3d07547
Copter: make make/gimbal configurable on a per-board basis
2020-08-04 09:18:14 +10:00
Randy Mackay
d2b94bd45d
Copter: verify_circle removes redundant setting of circle center
...
the circle center is already set in circle_movetoedge_start
2020-06-03 10:08:52 +09:00
Andrew Tridgell
e673bd8909
Copter: implement disarm on land based on MIS_OPTIONS
...
only continue with mission if MIS_OPTIONS bit is set
2020-06-02 09:12:22 +09:00
murata
520782d7f2
Copter: Correction of spelling errors (NFC)
2020-05-18 13:26:11 +10:00
Randy Mackay
d9ecf51457
Copter: auto mode loiter-turns accepts pilot yaw input
2020-04-27 09:39:46 +09:00
Randy Mackay
c4b5d47e1f
Copter: white space fixes
2020-04-23 13:17:11 +09:00
Rishabh
1edf1d265c
Copter: Set correct yaw for circle in Mode Auto
2020-04-21 20:12:38 +09:00
Randy Mackay
71cbedb178
Copter: support circle with terrain altitude
2020-04-16 17:30:29 +09:00
Randy Mackay
8d99f204b0
Copter: integrate landing gear option and make edge based
...
also guided mode now retracts landing gear after takeoff
previously landing gear deployment was "level based" meaning the pilot could not override the gear's position
2020-02-26 08:01:00 +09:00
Peter Barker
ce5f23810b
ArduCopter: log disarm method
2020-02-22 12:16:29 +11:00
Randy Mackay
495c4ad6b6
Copter: remove unused ModeAuto::wp_start
...
this version accepts an offset from the ekf origin which is not required. All callers provide a Location
2020-02-17 14:30:18 +09:00
Randy Mackay
39a6b104dd
Copter: move RTLState to ModeRTL
2019-12-17 20:02:01 +09:00
Peter Barker
2296448027
Copter: make private enum class for LAND mode's state
2019-12-03 07:38:22 +08:00
Randy Mackay
de5945bea5
Copter: use const reference when retrieving wpnav destination
2019-11-12 08:50:05 +08:00
Randy Mackay
d0d07776ec
Copter: auto stays in takeoff submode after reaching altitude
2019-11-12 08:50:05 +08:00
Peter Barker
e6c6189fe5
Copter: cope with change in namespace of LogEvent enum
...
Also move Acro Trainer types into an enum class as the global defines
interfere with the Event names.
Also eliminate the Log_Write_Event wrappers.
2019-11-05 08:19:26 +08:00
Michael du Breuil
b42b1c08c4
Copter: Support new AP_Vehicle::set_mode
2019-10-25 08:48:22 +08:00
Peter Barker
b4537bebd8
Copter: move control_mode_t into being Mode::Number enum class
...
Fixes this compiler error:
In file included from ../../ArduCopter/sensors.cpp:1:
In file included from ../../ArduCopter/Copter.h:195:
../../ArduCopter/mode.h:1291:9: fatal error: declaration shadows a variable in the global namespace [-Wshadow]
AUTO, // after A and B defined, pilot toggle the switch from one side to the other, vehicle flies autonomously
^
../../ArduCopter/defines.h:38:5: note: previous declaration is here
AUTO = 3, // fully automatic waypoint control using mission commands
^
1 error generated.
2019-09-13 13:12:08 +09:00
Peter Barker
c0774e74e0
Copter: fix format-string compilation warning
...
../../ArduCopter/mode_auto.cpp: In member function 'void ModeAuto::do_nav_delay(const AP_Mission::Mission_Command&)':
../../ArduCopter/mode_auto.cpp:1372:84: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int' [-Wformat=]
gcs().send_text(MAV_SEVERITY_INFO, "Delaying %u sec",nav_delay_time_max_ms/1000);
^
This is with a mini-pix build.
2019-08-21 18:48:45 +09:00
Tom Pittenger
0983a04d52
Copter: NAV_Delay variable timers to be all unsigned and labeled as _ms
2019-08-19 15:24:06 -07:00
Randy Mackay
709c874d8b
Copter: integrate AP_OAPathPlanner
2019-08-17 09:42:43 +09:00
liang
e422f2b2fd
Copter: mode_auto: retract the landing gear automatically
2019-07-30 09:46:18 +09:00
Leonard Hall
c56acb49d6
Copter: Add missing Loiter initialisation lines.
...
This command is missing to define the desired acceleration that loiter will initalise to.
loiter_nav->clear_pilot_desired_acceleration();
2019-07-20 16:40:51 +09:00
Randy Mackay
b7a748df88
Copter: auto's wp_start accepts terrain alts
2019-07-18 09:01:09 +09:00
Peter Barker
e3da6d69d5
Copter: mode_auto: don't set takeoff dest from bad current location
2019-06-18 09:07:56 +09:00
Peter Barker
676d75c391
Copter: correct namespacing of Copter modes
...
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.
This was done mechanically for the most part.
I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Peter Barker
6dce39cbe1
Copter: use AP_Arming methods to arm and disarm vehicle
...
Really just changing the namespace of init_arm_motors
2019-05-30 07:37:30 +09:00
Randy Mackay
791b6effdd
Copter: fix wp distance and bearing reporting during LOITER_TURNS
2019-05-07 13:54:31 +09:00
Pierre Kancir
caf925eda5
Copter: factorize arm or land check
2019-04-16 10:17:47 +09:00
Peter Barker
46a6f45e4a
Copter: adjust for desired spool state and spool state renames
2019-04-14 12:18:03 +09:00
bnsgeyer
94738c3f86
Copter: change make_safe_shut_down to make_safe_spool_down
2019-04-08 09:42:21 +09:00
bnsgeyer
f96da56ad6
Copter: Allow safe shutdown before disarming
2019-04-08 09:42:21 +09:00
Leonard Hall
593925567b
Copter: formatting fixes
2019-04-08 09:42:21 +09:00
Randy Mackay
a6bfafefb0
Copter: move loiter and wpnav init out of make_safe_shut_down
...
resolves autotest RTLSpeed test failure
2019-04-08 09:42:21 +09:00
Leonard Hall
38cc5a817f
Copter: consolidate mode state decisions
...
bnsgeyer and rmackay9 contributed to these changes
make_safe_shut_down waits for spool down before disarming
remove use of attitude_control::set_throttle_out_unstabilized to consolidate logic between multicopters and tradhelis
2019-04-08 09:42:21 +09:00
Peter Barker
c7e21d95ef
Copter: move Log_Write_Error into library
2019-03-27 12:36:40 +11:00
Peter Barker
366051c39f
Copter: use enum class for AltFrame enumeration
2019-03-19 10:31:18 +11:00