Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-09 17:38:32 -04:00
Code Issues Packages Projects Releases Wiki Activity
44,199 Commits 71 Branches 510 Tags 784 MiB
60b4953751
Commit Graph

23983 Commits

Author SHA1 Message Date
Randy Mackay
eeb1a1846c AP_NavEKF3: replace prearm_healthy with pre_arm_check 2020-10-07 11:53:07 +11:00
Randy Mackay
b2d4622320 AP_NavEKF2: replace prearm_healthy with pre_arm_check 2020-10-07 11:53:07 +11:00
Randy Mackay
1d97416a51 AP_AHRS: replace prearm_healthy with pre_arm_check 
Also removes prearm_failure_reason
 2020-10-07 11:53:07 +11:00
mhefny
02daa4c3ec AP_InertialSensor: update L3G4200D driver 2020-10-06 09:27:26 -07:00
mhefny
1200d0e2f8 AP_HAL: add PROBE_IMU_I2C2 to linux.h 2020-10-06 09:27:26 -07:00
Randy Mackay
d9de6e8de9 AP_Common: UINT16_VALUE, UINT32_VALUE get parentheses around arguments 2020-10-06 20:52:29 +11:00
Randy Mackay
4381eff482 AP_Proximity: simplify get_horizontal_distances 
no need to fill in missing orientations.  This is only used for reporting to the ground stations
 2020-10-06 20:52:29 +11:00
Randy Mackay
e081d83185 AP_Proximity: Lightware SF45B driver 2020-10-06 20:52:29 +11:00
Randy Mackay
f3b193d6f8 AP_Common: add UINT32_VALUE 2020-10-06 20:52:29 +11:00
Randy Mackay
63a21c6c12 AP_Proximity: add correct_angle_for_orientation to backend 2020-10-06 20:52:29 +11:00
Randy Mackay
cf020e1d84 AP_Proximity: minor spelling fix for SF40c assert 2020-10-06 20:52:29 +11:00
Andrew Tridgell
e995a198bd AP_GPS: always send GPS2_RAW if 2nd GPS configured 
this improves the display on the GCS when the GPS has not yet been
found. This is particularly important after a reboot, as otherwise the
GCS may display stale information from the previous boot
 2020-10-06 16:48:19 +11:00
Randy Mackay
4b7709f11d AP_Parachute: move sink rate check to new method 
also remove unused critical_sink accessor
 2020-10-06 16:14:59 +11:00
Randy Mackay
17d4e797fb AP_Parachute: formatting fixes 2020-10-06 16:14:59 +11:00
Michael du Breuil
b04844ca13 AP_Logger: Log all vibration instances 2020-10-06 14:20:49 +11:00
Randy Mackay
835e6fc764 AP_VisualOdom: T265 ignores position and speed for 1sec after reset 2020-10-06 09:18:04 +09:00
Randy Mackay
d9b90bf19f AP_Logger: VISP and VISV get ignored field 2020-10-06 09:18:04 +09:00
Andrew Tridgell
8e08d93026 AP_GPS: fixed pre-arm check on ublox M9 GPS 
this prevents a failure from config of SOL and TMODE messages
 2020-10-06 10:22:52 +11:00
vierfuffzig
60b37f395e AP_OSD_Screen.cpp: add decimal precision to vspd 2020-10-06 10:17:43 +11:00
Tom Pittenger
5e2450c4ea AP_Math: fix LoadUint() to allow 32bit values 2020-10-05 15:32:53 -07:00
Patrick José Pereira
e4f8d47423 AP_LeakDetector: AP_LeakDetector_Digital: Improve status logic 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-05 16:39:03 +01:00
Tatsuya Yamaguchi
ea0d869a9c RC_Channels: redefine surface tracking auxiliary function 2020-10-05 13:23:51 +09:00
QioTek
f04de7d610 HAL_ChibiOS: Add QioTekZealotF427 build target 
I've added the hwdef to support the QioTekZealotF427

It has 3 IMU sensors(ICM20698,ICM20602,BMI055), a Compass(Ist8310),
2Baro sensors(DSP310,MS5611), an integrated analog OSD, 14motor
outputs, 4Relay output, 5uarts, 2Power Module input, an i2c, a Can.
 2020-10-05 07:41:06 +11:00
Andrew Tridgell
11b3c622dd AP_BoardConfig: allow more serial ports to have flow control 2020-10-03 20:22:56 +10:00
Andrew Tridgell
702a3926f8 HAL_ChibiOS: setup defines for more flow control pins 
allow all uarts to have flow control
 2020-10-03 20:22:56 +10:00
Andrew Tridgell
5e80b10396 HAL_ChibiOS: enable telem3 on Durandal 
the RCIN issue is not there in the final production boards
 2020-10-03 20:22:56 +10:00
Peter Barker
6711c479de SITL: fix RPLidarA2 instructions and diagnostic output 2020-10-02 16:05:15 +10:00
Andrew Tridgell
e471b23f58 HAL_ChibiOS: add a max quota of GPIO interrupts 
This implements a max quota of GPIO interrupts per 100ms period to
prevent high interrupt counts from consuming all CPU and causing a
lockup. The limit is set as 10k interrupts per 0.1s period. That limit
should be high enough for all reasonable uses of GPIO interrupt
handlers while being below the level that causes significant CPU loads
and flight issues

This addresses issue #15384
 2020-10-02 09:38:24 +10:00
Andrew Tridgell
965af98f4a AP_InternalError: added an internal error for GPIO ISR overload 2020-10-02 09:38:24 +10:00
Andrew Tridgell
c62b86e3c1 AP_HAL: added timer_tick() on GPIO 2020-10-02 09:38:24 +10:00
Peter Barker
4bbf623cac AP_Soaring: remove unused variables 2020-10-01 21:13:20 +10:00
Peter Barker
914316a529 AP_RangeFinder: remove unused variables 2020-10-01 21:13:20 +10:00
Peter Barker
460bb7291e AP_Proximity: remove unused variables 2020-10-01 21:13:20 +10:00
Peter Barker
b024ff8ea4 AP_Notify: remove unused variables 2020-10-01 21:13:20 +10:00
Peter Barker
3a8751d8a7 AP_NavEKF: remove unused variables 2020-10-01 21:13:20 +10:00
Peter Barker
10e0646251 AP_Generator: remove unused variables 2020-10-01 21:13:20 +10:00
Peter Barker
0eb34912cf AP_ADSB: remove unused variables 2020-10-01 21:13:20 +10:00
Peter Barker
12af51e356 AC_Autorotation: remove unused variables 2020-10-01 21:13:20 +10:00
Patrick José Pereira
57373180d1 AP_LeakDetector: Remove not used LeakDetector_Type enum 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-01 16:31:13 +10:00
Andrew Tridgell
2b13ad35ec AP_OLC: remove use of algorithm header 
not needed
 2020-10-01 09:40:45 +10:00
Michel Pastor
8465588467 AP_OLC: clean namespace and use constexpr instead of init method 2020-10-01 09:40:45 +10:00
giacomo892
4eeccb61cd WAF: Add AP_OLC to build 2020-10-01 09:40:45 +10:00
giacomo892
b00d3e00bc AP_OSD: Add OLC (pluscode) element 2020-10-01 09:40:45 +10:00
giacomo892
481d72255f AP_OLC: Open Location Code support 2020-10-01 09:40:45 +10:00
bugobliterator
0a4ea250ad AP_HAL_ChibiOS: disable CANFilter on H7 boards temporarily 2020-10-01 07:19:19 +10:00
Peter Barker
a5a13f37c9 SITL: adjust for START_STOP_D now not polluting global namespace 2020-09-30 23:14:40 +10:00
Peter Barker
6cbb553adc AP_Frsky_Telem: reformat new filed using astyle.sh; no history to lose 2020-09-30 23:14:40 +10:00
Peter Barker
9c211d9847 AP_Frsky_Telem: move #defines to be static const members of AP_Frsky_Backend 2020-09-30 23:14:40 +10:00
Peter Barker
0bb7a31850 AP_Frsky_Telem: move all method implementations into correct files 2020-09-30 23:14:40 +10:00
Peter Barker
05d7950261 AP_Frsky_Telem: frontend/backend split 2020-09-30 23:14:40 +10:00