Andrew Tridgell
609a2d95f8
AP_Logger: try harder to use close to user buffer size
...
this stops us drastically reducing buffer size when low on memory
2019-10-06 10:58:07 +11:00
Andrew Tridgell
3105255080
AP_HAL: added HAL_MEM_CLASS for amount of memory
2019-10-06 10:58:07 +11:00
Andrew Tridgell
b8a77890b6
HAL_ChibiOS: generate HAL_MEMORY_TOTAL_KB for each board
2019-10-06 10:58:07 +11:00
Andrew Tridgell
bd95331068
HAL_ChibiOS: added Pixhawk1-1M
...
this is for 1M versions of the Pixhawk1. It is smaller than fmuv2 as
it only links the specific sensors needed for Pixhawk1
2019-10-06 10:58:07 +11:00
vierfuffzig
afdb53daca
AP_BLHeli: fix watchdog resets with telemetry active from non-multirotor motors
2019-10-06 10:58:07 +11:00
Andrew Tridgell
a49cc87dae
AP_NavEKF3: change optimisation from -O3 to -O2
2019-10-02 12:03:53 +10:00
Andrew Tridgell
fb7ddd9b9d
AP_NavEKF2: change optimisation from -O3 to -O2
2019-10-02 12:03:47 +10:00
Andrew Tridgell
2962211ea0
HAL_ChibiOS: changed optimisation of higher end boards to -O2
...
-O3 does not seem to be a win, and takes up a lot more flash
2019-10-01 08:33:13 +10:00
Andrew Tridgell
560a1bf9e0
HAL_ChibiOS: disable DMA for RCIN on Pixracer
...
this frees up DMA for USART1_RX, which gives DMA for input over the
SERIAL5 WiFi port, which is important for applications where a
pixracer is being fed vision data over WiFi
2019-10-01 08:32:56 +10:00
Mark Whitehorn
eb620f0792
AP_IOMCU: fix IO fast channel mask
2019-10-01 08:32:03 +10:00
Mark Whitehorn
2034bde367
HAL_ChibiOS: fix FMU fast_channel_mask
...
fix IO fast channel mask
use IOMCU chmask to only set right channels
remove unused variable
2019-10-01 08:32:00 +10:00
Andrew Tridgell
4c22633c60
AP_GPS: fixed a bug in handling corrupt u-blox packets
...
when we have corrupt input due to loss of bytes on a UART we can end
up with a u-blox packet with zero payload bytes. When that happens we
need to bypass payload reading as otherwise we will end up keeping
reading bytes until the driver resets at 4 seconds, causing a GPS
outage.
This was causing GPS outages every few hours in copters running 3.6.7,
and was also reproduced in SITL using SIM_GPS_BYTELOSS.
2019-10-01 08:31:20 +10:00
Henry Wurzburg
6108c5b5ab
AP_OSD: Add autoranging to current and speed displays
2019-09-22 21:11:06 +10:00
Randy Mackay
1433741cc9
AP_Proximity: fix rangefinder backends cm to m conversion
2019-09-22 21:09:38 +10:00
Peter Barker
784edac137
AP_NavEKF2: correct return of empty prearm string
2019-09-22 21:09:11 +10:00
Peter Barker
6693610c7a
AP_NavEKF3: correct return of empty prearm string
2019-09-22 21:09:04 +10:00
Andrew Tridgell
2bebe8f916
SITL: added SIM_LOOP_DELAY parameter
...
this allows us to test high CPU load conditions by adding a delay to
each loop
2019-09-22 21:08:38 +10:00
Andrew Tridgell
ae4bcf0f6f
AP_Scheduler: cope with high CPU load by stretching loop times
...
this adds an extra budget of time per loop when we are not achieving
scheduled tasks at a rate of at least 1/8 of the desired rate. This
fixes an issue where a vehicle can become uncontrollable if the user
asks for a SCHED_LOOP_RATE which is not achievable. As these events
happen we add extra loop budget until we are able to run all tasks. We
drop the extra time when the CPU pressure eases.
2019-09-22 21:08:34 +10:00
Andrew Tridgell
d916c31575
AP_Logger: added logging of extra loop time from the scheduler
2019-09-22 21:08:27 +10:00
Lucas De Marchi
1eb2dc2b2f
AP_RangeFinder: add missing overrides
2019-09-22 21:08:14 +10:00
Lucas De Marchi
575200f8c7
AP_RangeFinder: fix build
2019-09-22 21:08:11 +10:00
Andrew Tridgell
62c3fec45c
HAL_ChibiOS: fixes from LGTM errors
2019-09-22 21:07:54 +10:00
Andrew Tridgell
f6b28f3013
HAL_ChibiOS: fixed delay for OneShot125 channels
...
we were delaying output for OneShot125 by 8x as much as we need to,
which reduced our max loop rate
2019-09-22 21:07:49 +10:00
Andrew Tridgell
372eca7dad
AP_NavEKF3: fixed use of uninitialised variable in EKF3 mag fusion
...
not all elements of H_MAG are initialised, but they are used, as found
by valgrind
2019-09-22 21:07:38 +10:00
Andrew Tridgell
eeb6fbe5ee
HAL_ChibiOS: fixed undef for define lines
...
this fixes IMU heater enable for CubeBlack+
2019-09-16 12:55:44 +10:00
Andrew Tridgell
dceee38d69
HAL_ChibiOS: fixed IMU order and board ID for CubeBlack+
2019-09-16 12:55:36 +10:00
bugobliterator
e540248695
HAL_ChibiOS: hwdef: add hwdef for CubeBlack+
2019-09-16 12:55:34 +10:00
bugobliterator
8dca2b14db
AP_BoardConfig: add support for CubeBlackPlus
2019-09-16 12:55:32 +10:00
Andrew Tridgell
f86a7d347d
Revert "AP_HAL_SITL: set initial PWM values to a flag value"
...
This reverts commit 1735563bb7
.
This commit broke RC input on high channels with sim_vehicle.py, plane
getc RC failsafe immediately
2019-09-15 18:26:50 +10:00
Peter Barker
6193d6cf69
AP_Compass: fix example by instantiating Baro
...
Baro is required to get location, and Compass tries to get the declination based on current location
2019-09-13 08:54:21 +09:00
bnsgeyer
e91402aeb6
AP_Motors: tradheli-make all RSC params part of library
...
AP_Motors: Tradheli-fix RSC mode change while armed
AP_Motors: tradheli - improve RSC param metadata
AP_Motors: tradheli-put all throttle param settings in percent
2019-09-13 08:53:54 +09:00
Peter Barker
1735563bb7
AP_HAL_SITL: set initial PWM values to a flag value
...
These should never be used. Setting them to a flag value may give a
hint to someone trying to debug a problem in the future.
2019-09-13 08:58:43 +10:00
Peter Barker
8da978b913
GCS_MAVLink: use sending_mavlink1 method in send_rc_channels_raw
2019-09-12 16:10:23 +10:00
Peter Barker
5dad0e5410
AP_HAL: a few more simple tests for snprintf
2019-09-12 16:08:59 +10:00
Andrew Tridgell
28cca004f2
HAL_ChibiOS: added default params for skyviper-journey
2019-09-12 14:02:36 +10:00
Andrew Tridgell
1dca0a16f5
HAL_ChibiOS: rename skyviper-f412 to skyviper-journey
2019-09-12 14:02:36 +10:00
Andrew Tridgell
dcbbc86f34
AP_Radio: added support for Skyviper 2018 model radios
...
fixes #12273
2019-09-12 14:02:36 +10:00
mhefny
375510ecc2
SITL: adding wind simulation in Webots
2019-09-12 13:22:26 +10:00
mhefny
bfb7e3af3b
SITL: sending wind data to Webots controller
2019-09-12 13:22:26 +10:00
Andrew Tridgell
8bb6a67b36
GCS_MAVLink: refuse set of read-only parameters
2019-09-12 10:50:30 +10:00
Andrew Tridgell
6573857a90
AP_Param: support @READONLY marker in param files
...
allows for read-only parameters embedded in firmware
2019-09-12 10:50:30 +10:00
Andrew Tridgell
4a6fdc00c9
AP_AdvancedFailsafe: added AFS_MAX_RANGE option
...
this allows a maximum range since first arm to be set in
AFS_MAX_RANGE. This value (in km) will trigger the configured
termination type if the GPS location shows that it has been breached.
This feature, in combination with the @READONLY apj parameter feature,
is intended to be used to meet regulatory restrictions on a vehicles
maximum range
2019-09-12 09:59:17 +10:00
Andrew Tridgell
6af9d55e70
AP_OSD: fixed vsnprintf return assumption
2019-09-12 08:43:31 +10:00
Andrew Tridgell
98c2606c0a
GCS_MAVLink: fixed assumption on return of snprintf
2019-09-12 08:43:31 +10:00
Peter Barker
412bf24b9a
AP_HAL: add gtests for snprintf
2019-09-12 07:42:40 +10:00
Andrew Tridgell
54b9524c0b
AP_RangeFinder: make LightWare I2C native work with more hw versions
...
this allows the native i2c lightware driver to work with a wide range
of lidars from LightWare, removing the specific version check, and the
version specific config commands
2019-09-12 07:40:32 +10:00
Andy Piper
8e385d7453
AP_InertialSensor: correct formatting
2019-09-11 18:41:05 +10:00
Leonard Hall
6f3be90147
Filter: Alter Notch filter formula to remove /0 and allow perfect notch.
...
This formulation of the notch equations lets the user specify the depth of the Notch. The presence of a diveide by A prevents the gain going to zero and therefore achieving a perfect notch. It also provides the risk that a user may attempt to do this and cause a divide by zero error. This change adds the ability to achive a perfect notch and removes the possibility of a divide by zero.
Add Notch Filter parameter checking
2019-09-11 18:41:05 +10:00
Andy Piper
9b9fb0d593
Filter: sanity check the harmonic notch sample rate on initialization. do not allow harmonics to go above the nyquist frequency
2019-09-11 18:41:05 +10:00
Andy Piper
5b7f9f6bea
AP_InertialSensor: while sensors are converging update the filters sample rates. if gyro filtering produces invalid output, keep the previous value
2019-09-11 18:41:05 +10:00