Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
44,348 Commits 71 Branches 508 Tags 670 MiB
Commit Graph

44348 Commits

Author SHA1 Message Date
Iampete1 2acbef5579 Plane: tailsitters in VTOL transition use FW rates 2020-10-13 10:07:05 +11:00
Patrick José Pereira 175d55a0aa AP_LeakDetector: Add navigator support 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-12 09:53:03 -07:00
Patrick José Pereira 4c7af1d99f AP_LeakDetector: Add subtype check and warning message 
Add warning if board does not support leak detector sensors

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-12 09:53:03 -07:00
Andrew Tridgell e346cd3c80 GCS_MAVLink: fixed use of incorrect millis16() values 2020-10-12 13:48:15 +11:00
Peter Barker 45f7322af6 GCS_MAVLink: avoid catching up on sending messages when sending disrupted 
The code here was never meant to maintain an "average" streamrate.  It
was designed so that we would maintain a consistent clock in the face of
minor scheduling anomalies (like an EKF fusion step).

The way this is written, however, makes us spit out a message for each
of the intervals we missed - clearly not intended behaviour.

This was tested by inserting the following code:

 void GCS_MAVLINK::update_send()
 {
+    const uint32_t xnow = AP_HAL::millis();
+    if (xnow > 10000 &&
+        xnow < 20000) {
+        return;
+    }
+
 2020-10-12 13:48:15 +11:00
Peter Barker 8f1e9ebc7f autotest: reset camera feedback rate if exception is raised 2020-10-12 13:48:15 +11:00
Andrew Tridgell 989f8c5d41 HAL_ChibiOS: fixed a race condition in UART DMA transmit 
this fixes an issue seen on one board which caused a watchdog on high
uart DMA load. We have reproduced the issue on another board by
forcing a very high DMA transfer rate on the same DMA channel while
also requesting very high transfer rates on the UART. The likely race
is in the DMA transmit timeout code, and the simplest fix is to lock
out interrupts during the DMA setup to ensure the tx timeout cannot
trigger during the setup
 2020-10-12 13:25:48 +11:00
Peter Barker 9bde294112 AP_HAL: add chargen UARTDriver example 2020-10-09 19:14:59 +11:00
Peter Barker f9324d38c9 autotest: loosen groundspeed tolerance in guided-stop function 
Fixes current "Vehicle did not stop" problem
 2020-10-09 12:05:23 +11:00
Peter Barker b630aeeddf autotest: comment suspicious-looking latitude/longitude parameters 2020-10-08 17:23:09 +09:00
Peter Barker 750f1d4032 autotest: send position targets once 2020-10-08 17:22:29 +09:00
Peter Barker d13f6acc66 autotest: quieten mav draining 2020-10-08 17:21:35 +09:00
Randy Mackay 3ebfe502d3 Copter: 4.0.5-rc2 release notes 2020-10-08 09:15:56 +09:00
murata 967aa44fbe AP_Baro: Change message from AP_Baro to Baro for unification accross the file 2020-10-08 10:51:33 +11:00
bugobliterator 5880628b01 hwdef: add support for CubeBlack-periph 2020-10-08 09:31:35 +11:00
bugobliterator a348e342fa Tools: AP_Periph: add support for CubeBlack-periph 2020-10-08 09:31:35 +11:00
bugobliterator e16cab0437 AP_HAL_ChibiOS: ensure we timeout while checking FDCAN register sets 2020-10-08 09:31:35 +11:00
bugobliterator 5f0c553982 AP_HAL_SITL: configure filter only if in FilteredMode 2020-10-08 09:31:35 +11:00
bugobliterator ba576247f0 AP_HAL_Linux: configure filter only if in filtered mode 2020-10-08 09:31:35 +11:00
bugobliterator 49915ed06f AP_UAVCAN: save some stack space 2020-10-08 09:31:35 +11:00
bugobliterator ca957519dc AP_HAL_ChibiOS: redo filter configuration to make it work with STM32H7 2020-10-08 09:31:35 +11:00
bugobliterator d1eb9e8aea AP_HAL: add FilteredCAN mode to tell driver to init as such 2020-10-08 09:31:35 +11:00
bugobliterator 46827f0c91 AP_CANManager: redo filter configuration to make it work with STM32H7 2020-10-08 09:31:35 +11:00
bugobliterator e49891d605 Tools: waf: remove extraneous frame-larger-than warning 2020-10-08 09:31:35 +11:00
Pierre Kancir 774c8583b1 Tools: make apm.pdef.xml more readable. 2020-10-07 19:38:14 +11:00
Patrick José Pereira 16469e703e Tools: Add firmware_version_decoder script 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-07 19:32:12 +11:00
Patrick José Pereira 8701e3626d GCS_MAVLink: Update GCS_Dummy to use new AP_FWVersionDefine header 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-07 19:32:12 +11:00
Patrick José Pereira adda695630 AP_Common: Update AP_FWVersion struct to be used with binary parsers 
- Add an uint64_t header to allow easy detection of struct
- Add an uint16_t version
    - MSB is for major release, compatibility break
    - LSB for minor version, no compatibility break
- Add pointer size variable to allow decode of pointers
- Add vehicle type information
- Add board type and subtype to allow hardware identification
- Set type of fw_type to uint8_t since enum is declared as int
- Organize struct to be packed inside 32bits system

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-07 19:32:12 +11:00
Patrick José Pereira 75e9550bce AP_Vehicle: Define APM_BUILD_DIRECTORY as UNKNOWN if not defined 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-10-07 19:32:12 +11:00
Andy Piper af8542b5d6 AP_ADSB: conditionally compile based on HAL_ADSB_ENABLED 2020-10-07 19:11:38 +11:00
Tom Pittenger 150b8653a4 Revert "AP_Param: add set_and_save_and_notify()" 
This reverts commit 96a2aa485a.
 2020-10-07 19:11:38 +11:00
Tom Pittenger 787d7f5254 Revert "AP_Math: add function to convert any base to any base" 
This reverts commit 935cb39dff.
 2020-10-07 19:11:38 +11:00
Tom Pittenger a0f25640a2 Revert "AP_Math: add bitwise fetch/load 16, 24, 32bit operations" 
This reverts commit 6efaa29577.
 2020-10-07 19:11:38 +11:00
Tom Pittenger 899cc9ef5d Revert "AP_SerialManager: add support for Sagetech protocol" 
This reverts commit b74c22864d.
 2020-10-07 19:11:38 +11:00
Tom Pittenger 8e1f5ec6cd Revert "AP_ADSB: create backend and add Sagetech driver" 2020-10-07 19:11:38 +11:00
Tom Pittenger f2e65ea3cd Revert "AP_ADSB: Sagetech for 2MB only" 
This reverts commit 1fce38c62a.
 2020-10-07 19:11:38 +11:00
Tom Pittenger b2eb3eb881 Revert "AP_ADSB: conditionally compile based on HAL_ADSB_ENABLED" 
This reverts commit 465357e715.
 2020-10-07 19:11:38 +11:00
Tom Pittenger 90b4056aa4 Revert "AP_ADSB: remove annoying debug" 
This reverts commit 5a535b25e3.
 2020-10-07 19:11:38 +11:00
Tom Pittenger ee8f50e6a5 Revert "AP_Math: fix LoadUint() to allow 32bit values" 
This reverts commit 5e2450c4ea.
 2020-10-07 19:11:38 +11:00
Iampete1 0201692eeb Plane: Q_OPTION to disable synthetic airspeed assist 2020-10-07 18:20:08 +11:00
Andy Piper af8d6c5fc9 AP_Scheduler: add the fast loop to task statistics 2020-10-07 18:08:19 +11:00
Randy Mackay 530eb6d236 AC_WPNav: remove unused reached_spline_destination 2020-10-07 15:41:18 +09:00
Andrew Tridgell 99170c3954 Tools: update IO firmware 2020-10-07 16:44:13 +11:00
Andrew Tridgell 1b5551206a AP_IOMCU: fixed bug in SBUS output when scanning for FPort input 
when we are looking for FPort input, we normally switch UART3 on the
IOMCU to 115200 to look for inverted inputs at 115200 baudrate. We
need to disable this switching when we have SBUS output enabled to
prevent a change in the SBUS output baudrate

Many thanks to afishman for finding this bug

Fixes #15522
 2020-10-07 16:44:13 +11:00
Tatsuya Yamaguchi e347618210 Rover: support speed control of DO_REPOSITION 2020-10-07 10:12:24 +09:00
Peter Barker 1d0735f206 autotest: add a poll_message method 2020-10-07 11:54:02 +11:00
Randy Mackay d31a00a6a1 AP_Scripting: replace prearm_healthy binding with healthy 2020-10-07 11:53:07 +11:00
Randy Mackay facc0ea8bb Sub: integrate ahrs.pre_arm_check 2020-10-07 11:53:07 +11:00
Randy Mackay 161d235c8b Rover: integrate ahrs.pre_arm_check 2020-10-07 11:53:07 +11:00
Randy Mackay 60b4953751 Plane: integrate ahrs.pre_arm_check 2020-10-07 11:53:07 +11:00