Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-02 14:13:42 -04:00
Code Issues Packages Projects Releases Wiki Activity
13,190 Commits 71 Branches 509 Tags 744 MiB
5ead80994e
Commit Graph

317 Commits

Author SHA1 Message Date
rmackay9
a5bb54e36e ArduCopter: RTL clean-up and slightly improved landing sensor 
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
 2012-12-06 10:31:52 +09:00
rmackay9
a94826f182 ArduCopter: add set_throttle_mode to better control initialisation of variables 2012-12-06 10:31:04 +09:00
rmackay9
3cbef57c64 ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy 
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
 2012-12-06 10:30:49 +09:00
Andrew Tridgell
6fbf5ec8f2 Copter: update ArduCopter for new ins interface 2012-11-30 07:15:18 +11:00
Robert Lefebvre
07d7d90882 ACM: TradHeli 
Bringing in Low Pass Filter for Rate Controllers
 2012-11-26 21:51:23 -05:00
Robert Lefebvre
3f0e8dd358 ACM: TradHeli 
Bringing in Low Pas Filter
Commented out because it does not build.
Needs updates to Low Pass Filter Lib
 2012-11-26 21:21:12 -05:00
Andrew Tridgell
f6ec932d63 Copter: added reboot in CLI and over MAVLink 
useful for getting out of CLI
 2012-11-24 18:20:37 +11:00
Andrew Tridgell
bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
Michael Oborne
a5e3ce4655 remove cli planner mode - no longer used 2012-11-21 07:45:45 +08:00
rmackay9
07a7a1acd8 ArduCopter: replaced digitalRead and digitalWrite with faster calls 
improved performance logging to dataflash
 2012-11-19 01:16:07 +09:00
rmackay9
bcb9519fd7 ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues 2012-11-11 22:42:10 +09:00
Jason Short
d2a5928c06 Ap state updates 2012-11-09 22:15:15 -08:00
rmackay9
1f801714e8 ArduCopter: incorporate new version of inertial navigation 
Moved several navigation functions from ArduCopter.pde to navigation.pde
 2012-11-07 19:21:31 +09:00
rmackay9
a1b4ec6d0e ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
Jason Short
e138b0a1d7 ACM: Added simple mode bearing logging for bug hunting 2012-10-28 12:12:38 -07:00
Jason Short
1713279ace ACM: Formatting 2012-10-27 14:13:46 -07:00
rmackay9
cebcc226ee ArduCopter: change TOY_M throttle mode to THROTTLE_HOLD 2012-10-26 10:56:06 +09:00
rmackay9
78316adf75 ArduCopter: replace Serial.print with Serial.print_P to save memory. 
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
 2012-10-22 16:45:24 +09:00
Jason Short
a0752dc7dc ACM Acceleration management 
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
 2012-10-21 14:32:39 -07:00
Robert Lefebvre
592f4040fd Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups. 2012-10-18 16:39:05 -04:00
rmackay9
a2a3eed063 ArduCopter: bug fix for telemetry not working on APM1. 
SPI3 is also UART3.  On APM1 we use UART3 for telemetry and don't need SPI3.
 2012-10-18 19:15:21 +09:00
rmackay9
997fe85880 ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
rmackay9
c0ad98be31 ArduCopter: failsafe added to shutdown motors if mainloop fails 2012-10-09 12:30:17 +09:00
rmackay9
95763e610b ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9
8c6fd340d7 AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9
b2f12c4854 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
Andrew Tridgell
5fd39bb928 ACM: updates for new GPS detection 
a GPS can now be attached after startup
 2012-09-17 14:45:47 +10:00
rmackay9
303ca11c4c HIL: changes to fix HIL for ArduCopter after recent timing changes. 
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
 2012-09-15 18:42:56 +09:00
rmackay9
b6d2d4723f ArduCopter: print firmware version of code instead of zero. 2012-09-13 21:49:11 +09:00
rmackay9
2e9e3ce5a6 ArduCopter: increase SPI bus speed to 2Mhz after IMU initialisation has completed (MPU6000 accepts maximum of 1Mhz for some registers but up to 20Mhz for main sensor and interrupt registers) 2012-08-28 17:29:48 +09:00
uncrustify
969166c4e3 uncrustify ArduCopter/system.pde 2012-08-21 19:19:50 -07:00
Andrew Tridgell
1b0f5ac84f ACM: use ahrs.set_fast_gains() on arm/disarm 2012-08-21 15:38:31 +10:00
Jason Short
1e0ab8768e ACM: Toy mode updates 2012-08-11 22:37:26 -07:00
Jason Short
f641c5d077 ACM system.pde - toy mode update, cleanup of throttle cruise code 2012-08-09 16:59:44 -07:00
rmackay9
94cb325184 ArduCopter: added ahrs.ini() to system.pde to allow offsets to be pushed into MPU6000's DMP 2012-07-28 14:21:45 +09:00
Jason Short
a7b1252b51 arducopter 
alt hold state reset
 2012-07-18 22:57:11 -07:00
Jason Short
bb99bd4626 Arducopter: INS 
removed zero accells call
 2012-07-18 22:57:10 -07:00
Andreas M. Antonopoulos
c73f7ef3ab AP_Limits library, provides modular "limits" such as altitude and geo-fencing. 2012-07-14 19:26:17 -07:00
Jason Short
1dbde3f803 Arducopter: Added note 2012-07-10 21:53:37 -07:00
Amilcar Lucas
dfe0983e1e Merge the changes from APM_Camera branch into ArduCopter 
Conflicts:

	ArduCopter/Camera.pde
	ArduCopter/Parameters.pde
 2012-07-11 00:39:13 +02:00
Jason Short
9a30270879 System.pde - RTL 
removed Approach mode, fixed RTL to loiter until desired altitude is reached
 2012-07-01 13:40:12 -07:00
Andrew Tridgell
82ede937e7 AnalogSource: convert analogRead() calls to the new API 
this should give us much better analog values, plus save a bunch of
CPU time
 2012-07-01 15:01:05 +10:00
Jason Short
031830b5fe System.pde: Toy mode details for set_mode() 2012-06-29 21:20:28 -07:00
Jason Short
cd93c40f09 Added Toy Mode control 2012-06-25 23:08:25 -07:00
Jason Short
8b212d8baa Adjustments to the Inertial_nav 
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
 2012-06-20 08:47:47 -07:00
Andrew Tridgell
940d994efb GPS: Use appropiate GPS_ENGINE settings in APM, ACM and rover 2012-06-10 16:36:18 +10:00
Andrew Tridgell
a684bddbda GPS: open the GPS serial port with a 256 byte buffer 
the UBLOX needs more than 128 bytes for reliable parsing
 2012-06-08 16:42:03 +10:00
Jason Short
71f80f3a77 Bug fix: When adjusting altitude, RTL then land will fail unless this var is reset to false. 2012-06-03 22:25:27 -07:00
Jason Short
0ce883b96a Removed unused variable 2012-05-29 12:43:23 -07:00
Jason Short
5754f97433 reversed circle_WP calculation so the next_WP refers to the destination around the circle and circle_WP refers to the center. The intent is to make it easier to see via ground station. 2012-05-27 09:21:20 -07:00
Robert Lefebvre
c8fb9a6635 More CopterLEDS changes. 
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2.  Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2.  Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code.  Legacy users should see no difference.
 2012-05-15 12:00:21 -04:00
Adam M Rivera
0c3d6614cd system.pde: Updated param name to loiter_timer. 2012-04-16 10:12:30 -05:00
Adam M Rivera
a2b338c052 System: Added handler for the new APPROACH flight mode which will initiate an approach to a target alt as defined by the user. 2012-04-15 16:55:34 -05:00
rmackay9
c337df11c8 ArduCopter - LEDS - set new output pins to OUTPUT to support COPTER_LEDS. 
Code by Robert Lefebvre
 2012-04-12 22:55:40 +09:00
rmackay9
1d086c83f0 ArduCopter - system.pde - changed references to "motor_armed" to "motors.armed()" as part of the move to use AP_Motors library. 2012-04-04 23:03:21 +09:00
Andrew Tridgell
b4107d35e8 MAVLink: raise the serial transmit buffer size to 256 bytes 
the 128 byte serial transmit buffer was causing significant problems
with queueing of mavlink messages. With 256 bytes we can fit a lot
more messages out in each pass of the code, which makes telemetry more
efficient

As we discussed on the dev call, we now have enough free ram for this
to be worthwhile
 2012-03-30 17:46:20 +11:00
Andrew Tridgell
547b4ed55b AHRS: adapt ArduCopter for new AHRS framework 2012-03-19 17:29:02 +11:00
Jason Short
fe7ca98701 ACM: system.pde - removed reset_nav_I() to consolidate the wind control reset. 2012-03-18 22:31:21 -07:00
Jason Short
f9d0dc9daa ACM: disabled auto_calibration until more testing can be done 2012-03-10 12:44:49 -08:00
Jason Short
5ad7320505 ACM: changed alt hold initialization of altitude to be immediate 2012-03-10 12:44:18 -08:00
Andrew Tridgell
828ad7625b ACM: removed the ADC filtering code 2012-03-10 10:34:32 +11:00
Andrew Tridgell
8393c0299b ACM: removed the DCM tuning overrides 
not needed now that DCM scales with deltat
 2012-03-10 10:34:31 +11:00
Andrew Tridgell
7e4c8592ff ACM: make it possible to build ArduCopter with quaternions 2012-03-10 10:34:29 +11:00
Andrew Tridgell
367947fd33 HWSTATUS: if we don't know the voltage, report it as zero 
this will tell us if board_voltage() is really working
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
64cc04ae09 ACM: adjust yaw drift correction constants 
this should give the compass a bit more authority
 2012-03-10 10:34:28 +11:00
Jason Short
730476fdfd ACM - 
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
 2012-03-06 22:22:14 -08:00
Andrew Tridgell
cb874d6097 ACM: added board_voltage() 2012-03-02 15:48:28 +11:00
Jason Short
eac77504a3 Added more Logging for PIDs. 2012-02-26 11:33:36 -08:00
Jason Short
f27e9f9ca1 added a simple rest of nav_throttle just in case 2012-02-25 13:31:21 -08:00
Jason Short
42b5d47f7b commented out control mode debug print 2012-02-21 21:48:07 -08:00
Jason Short
336441b109 reset slow_WP option at mode switch 2012-02-19 13:13:42 -08:00
Jason Short
17c6c7b294 added extra gain logging 2012-02-16 22:09:22 -08:00
Andrew Tridgell
3b4cae3cc3 adapted main ACM code for AP_Param 2012-02-13 16:22:52 +11:00
Jason Short
8ae53bffd2 Made Yaw Hold universal for Acro 2012-02-10 22:32:55 -08:00
Andrew Tridgell
1a861b3de5 allow for lower serial baud rates 
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
 2012-02-04 19:07:18 +11:00
Michael Oborne
151479f769 fix issue 502 
to identify quad over mavlink
 2012-02-03 06:53:08 +08:00
Jason Short
7833cea9d4 2.2B6 - Please verify Heli still functions properly. 
Added AC_PID lib
Updated landing code
bug fixes
 2012-01-28 22:00:05 -08:00
Randy Mackay
122623f64b OpticalFlow - added OF_LOITER flightmode 2012-01-28 09:27:16 +09:00
Jason Short
6784989e83 relocated reset_I term functions to central location 2012-01-20 22:52:30 -08:00
Jason Short
3ebed0b278 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
Jason Short
7877a872d3 added update throttle cruise function 2012-01-13 16:48:05 -08:00
Jason Short
a59c9ae22c added notes 2012-01-12 22:28:58 -08:00
Jason Short
4b54887c6c Switched to set_next_WP for mode switches 2012-01-10 23:43:44 -08:00
Jason Short
cf92631d33 added #if to wind compensation code 2012-01-10 23:42:26 -08:00
Randy Mackay
f68d23d91e ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow) 
Removed optical flow from regular loiter for now until it's tested.
 2012-01-09 13:53:54 +09:00
Jason Short
9c8122e061 converted auto land to use the mission planner version 
Removed gate that looked for already set control_mode. Wasn't compatible with failsafe
 2012-01-07 22:27:26 -08:00
Jason Short
98f9a5f237 Forced Faildafe throttle mode to throttle Auto 2012-01-06 10:21:50 -08:00
Jason Short
40ad164c8d Clears Auto_land timer 2012-01-05 21:15:12 -08:00
Andrew Tridgell
df81a9459a ACM: reset all I terms on gyro calibration 2012-01-05 10:15:14 +11:00
Jason Short
2e83e42764 Added precalc for wind compensation when entering Stabilze mode 2012-01-04 09:28:37 -08:00
Jason Short
ecb3241489 calc_wind_compensation called when exiting AP modes 
Rate I terms reset in Acro Mode switch
Limit of 1 m set to alt hold
Reset circle angle to 0 by default
Land got land_complete var set to false by default
 2012-01-04 09:28:37 -08:00
Andrew Tridgell
cdd5589498 I2c: default to 5ms timeout, and faster bus speed 
we will slow down the speed when we get a failure
 2012-01-04 16:36:47 +11:00
Randy Mackay
bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell
03a16c6e45 ACM: use new I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell
73e6d5ee11 ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Andrew Tridgell
0dadbf932a removed "Please run setup" loop from ArduCopter 
Chris asked for this to be removed as it was really mucking up the
initial experience setting up ArduCopter via the planner
 2011-12-24 18:12:51 +11:00
Jason Short
e5a3899b7f added ability to enter Loiter with only optflow available 2011-12-23 14:46:32 -08:00
Andrew Tridgell
ad9c0533d8 ACM: run mavlink loop while erasing logs 2011-12-18 10:19:41 +11:00
Jason Short
1251e8105d Added failsafe check 2011-12-14 22:08:41 -08:00
Andrew Tridgell
483bef35e5 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell
07dba4eff7 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Pat Hickey
a48c65b5b5 ArduCopter: update AP_Baro constructors & initializers 2011-12-11 15:21:10 -08:00
Pat Hickey
f3ad7f3af8 Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Pat Hickey
39fe9075d9 ArduCopter Init: different call to barometer.init based on CONFIG_BARO 
* BMP085 has two arguments, second varying on apm1/apm2
* ms5611 has no arguments
 2011-12-11 15:21:10 -08:00
Pat Hickey
2e200834e1 ArduCopter: Revert "Switched to Gyro only startup" 
This reverts commit f932f0a9f6a29e9c3193622109298c657ed5a908.

I fixed this bug in 734185599cd9d6a487c675460c09895172e012b0.

It is no longer valid to call IMU::init_gyro() before IMU::init().
 2011-12-11 14:50:02 -08:00
Randy Mackay
fe336fb749 ArduCopter - small fixes to fix HIL compile errors 2011-12-11 23:25:03 +09:00
Randy Mackay
67855b207d Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short
648ab5f4ae Switched to Gyro only startup 2011-12-10 15:13:20 -08:00
Jason Short
49806d93d9 Added Land FLight mode definition 2011-12-10 10:19:20 -08:00
Jason Short
0d8071a401 Added new gain and clamp value for DCM 2011-12-03 17:55:11 -08:00
Andrew Tridgell
aaac6212ab MAVLink: use the configured system ID for ArduCopter 2011-12-03 07:54:36 +11:00
Jason Short
b92b4e9092 cleanup 2011-11-28 21:40:22 -08:00
Doug Weibel
b03de3095e Add DataFlash.Init before doing a forced log erase on eeprom reset. 
Add progress indication during log erase
 2011-11-28 19:42:27 -07:00
Jason Short
df57380adc Erasing Logs causing major havoc. Users getting infinite loop. 2011-11-28 10:33:05 -08:00
Jason Short
fb5302c50b No longer resetting ch7 wp index with mode change, requires reboot 2011-11-27 22:23:02 -08:00
Jason Short
19c3c27ed0 Erasing Logs at new FW version detection 2011-11-26 16:39:28 -08:00
Andrew Tridgell
38c85c44ae ArduCopter: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell
3a542b3ef3 USB-MUX: enable USB MUX switching for ArduCopter 2011-11-25 20:00:19 -08:00
Andrew Tridgell
338445e60c ArduCopter-HIL: fixed HIL build 
Logging isn't always enabled
 2011-11-25 20:00:18 -08:00
Pat Hickey
1d50bb80fd hil-sensors ArduCopter: fixes to make hil-sensors build work properly 
* requires new stub libraries for InertialSensor and PeriodicProcess.
 2011-11-25 20:00:18 -08:00
Andrew Tridgell
1e41b4b2b0 timer_scheduler doesn't exist in HIL_MODE_ATTITUDE 2011-11-25 20:00:18 -08:00
Andrew Tridgell
3072fdda85 adc.Init() needs timer_scheduler 2011-11-25 20:00:17 -08:00
Pat Hickey
3131ab16ef remove BROKEN_SLIDER code 
use the new CLI_SLIDER_ENABLED option and the "hit ENTER 3 times"
method
 2011-11-25 20:00:17 -08:00
Pat Hickey
f1bad83d21 purple: fixed system init for purple sensor objects 2011-11-25 20:00:16 -08:00
Pat Hickey
4869ac3385 purple: use the new LED_ON/LED_OFF macros for LED level 
this gets this right on both APM1 and purple for ArduCopter
 2011-11-25 20:00:16 -08:00
Andrew Tridgell
89d2f0f849 mod barometer.Init() based on hardware 2011-11-25 20:00:15 -08:00
Jason Short
89e014c06a Added alternate alt hold, 
New ESC Calibration Routine
 2011-11-21 22:12:19 -08:00
Jason Short
95b797d359 removed the init_esc - reworking the method to avoid the use of the CLI. 2011-11-20 21:24:32 -08:00
Jason Short
aef4db8263 Logging stabilization KP to hunt bug 2011-11-19 16:59:54 -08:00
Jason Short
8e1f311c36 s 
shortened strings, logging defines updated
 2011-11-19 14:01:47 -08:00
Jason Short
35524f6da7 Added optimizations for radian calls to remove a division. 
added a protection for entering AP modes without Home being set by GPS lock.
 2011-11-19 11:08:13 -08:00
Jason Short
7dd737ad90 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 
Conflicts:
	Tools/autotest/autotest.py
 2011-11-12 21:53:08 -08:00
Jason Short
bee53453d6 nav updates 2011-11-12 21:46:57 -08:00
unknown
a7038cbaf9 TradHeli - new parameter HSV_MAN to allow better set-up from APMissionPlanner. Also changed swash movement to use radio_out which fixes some setup bugs 2011-11-12 23:23:07 +09:00
Jason Short
b29f4456c4 fix for SIM GPS 2011-11-08 14:10:09 -08:00
unknown
156b496bab TradHeli - small change to make throttle_cruise in terms of radio input instead of servo output 2011-11-06 17:40:17 +08:00
Jason Short
c8304114a3 renamed some command variables to align with Arduplane 
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
 2011-11-04 21:41:51 -07:00
Jason Short
fd9b16e787 resetting alt hold I 2011-11-01 09:27:49 -07:00
unknown
ea66c74ff0 TradHeli - added throttle scaling and heli specific angle_boost function that takes into account that heli's main blades can have -ve pitch. 2011-10-29 17:27:43 +09:00
Jason Short
7266c5372a Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-28 21:29:18 -07:00
Jason Short
07daf34ccc Added a slew rate to the alt change rate. 
Added better reporting of throttle control
upped constraints for alt hold
Additional logging for CTUN lay hold
 2011-10-28 21:29:10 -07:00
Andrew Tridgell
1118d26f03 fixed "Free RAM" display on bootup 2011-10-28 21:34:10 +11:00
Jason Short
27d9712e80 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 
Conflicts:
	libraries/APM_PI/APM_PI.cpp
 2011-10-27 12:41:00 -07:00
Jason Short
d4e5281a4c Deafaut dead_zone call 
Sets the correct default values for the RC_Channel group for Quads.
 2011-10-27 11:35:02 -07:00
Andrew Tridgell
5a44298d57 CLI: enable "hit enter 3 times" support for CLI 
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
 2011-10-27 21:54:07 +11:00
Jason Short
a693bea7d9 added extra user hook 2011-10-17 23:51:47 -07:00
Jason Short
142707711e Updates to guided mode from Michael O. 
removed or commented unused static vars
 2011-10-15 13:09:04 -07:00
Jason Short
43b3015963 lowered DCM RP gains 
made Instant_PWM optional
upped PWM output to 400hz
 2011-10-11 22:20:23 -07:00
Andrew Tridgell
d89ae696ef merged the GCS updates from ArduPlane to ArduCopter 
this removes all the non-MAVLink GCS options, and simplifies the HIL
and GCS code a lot. It also adds async sending of low priority GCS
text messages.
 2011-10-11 20:53:43 +11:00
Andrew Tridgell
5a71030d76 don't check the slider switch if CLI is disabled 
this prevents a build error in desktop mode
 2011-10-09 22:39:23 +11:00
Andrew Tridgell
c61fe55d76 don't initialise DataFlash if logging is disabled 2011-10-09 22:38:49 +11:00
Andrew Tridgell
01e5ae2ab9 use memcheck_available_memory() instead of freeRAM() 
this provides a more accurate view of memory
 2011-10-09 22:38:14 +11:00
Michael Oborne
fab2121c6d fix ac2 hil build 2011-10-04 18:55:10 +08:00
Jason Short
12cd4539a3 2.0.46 preliminary release 2011-09-29 23:30:32 -07:00
Jason Short
de61e87128 Added ADC gyro Filtering for quads - this fixes a noise issue introduced into the controller 
added Position mode
removed
Added back in the accelerometer experiment
Added filter_result boolean to enable filter on the fly
 2011-09-29 23:27:23 -07:00
Jason Short
239164fa19 Fixed Flip code to compile. Flip still not flight tested! 2011-09-25 12:21:54 -07:00
Jason Short
c91ad14e18 Fixed Timer overflow for throttle PI loop. 
Moved look at home to update_nav where it belongs
 2011-09-21 22:31:12 -07:00
Jason Short
73fd0084be Added Piezo Support, code from Oliver. 2011-09-18 17:12:28 -07:00
Amilcar Lucas
227ce0a92d Merge some small misc improvements from APM_Camera branch 2011-09-17 20:25:31 +02:00
Jason Short
d29cfbcee3 Integration of optical flow 
bug fixes for new Simple mode
increased Baro filter by 2 fields
 2011-09-15 23:33:00 -07:00
Jason Short
1ce2308d11 Removed Simple Mode 
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
 2011-09-14 13:58:18 -07:00
Jason Short
ecd14f4425 Cleaned up guided mode 
Reduced ADC filter to 3 from 6 to increase speed of filter.
 2011-09-12 12:57:36 -07:00
Jason Short
885ec18182 Removed last of Xtrack 2011-09-11 20:40:05 -07:00
Jason Short
e6b7c57d26 Circle Mode now working 
250Hz loop implemented
 2011-09-11 11:22:01 -07:00
Jason Short
97d69906dd Incremented to 2.0.41 2011-09-10 15:28:55 -07:00
Chris Anderson
59b5bafdd1 Renamed code to ArduCopter 2011-09-08 19:14:12 -07:00
Andrew Tridgell
1456a2a912 renamed top level directories 
ArduCopterMega -> ArduCopter
added archives directory for old code
 2011-09-09 11:27:41 +10:00