add Q_OPTION for AirMode (auto-enabled if RCx_OPTION ARMDISARM assigned)
bugfix: manual throttle mix for qacro
qualify auto airmode on/off
add Air Mode to Plane RC_OPTION metadata
restrict airmode to manual throttle modes
add qhover to manual throttle mix
move air_mode from Plane to QuadPlane
add Mode::is_vtol_man_throttle()
# avoid a timeout race condition where ArduPilot re-requests a
# fence point before we receive and respond to the first one.
# Since ArduPilot has a 1s timeout on re-requesting, This only
# requires a round-trip delay of 1/speedup seconds to trigger
# - and that has been seen in practise on Travis
AT-0417.0: Sending item with seq=0
AT-0417.2: Got (MISSION_REQUEST {target_system : 243, target_component : 250, seq : 0, mission_type : 1})
AT-0417.2: Got (MISSION_REQUEST {target_system : 243, target_component : 250, seq : 0, mission_type : 1})
AT-0417.2: Exception caught: Traceback (most recent call last):
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/common.py", line 3950, in run_one_test
test_function()
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4216, in test_poly_fence
self.test_fence_upload_timeouts()
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4057, in test_fence_upload_timeouts
target_component=target_component)
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4010, in test_fence_upload_timeouts_2
self.expect_request_for_item(item)
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 3958, in expect_request_for_item
raise NotAchievedException("Expected request for seq=%u" % item.seq)
NotAchievedException: Expected request for seq=1
The "AT" timestamps there are wallclock time. Since speedup for Rover
is 8 by default, that could be as much as 1.6 seconds meaning a
re-request from ArduPilot would be legitimate.
I've added some debug, too - we now emit "Sending item with seq=1"
between those two "Got" lines. That should make the problem clearer -
we've received a re-request rather than a request for the item after the
one we've already sent.
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
