Commit Graph

1265 Commits

Author SHA1 Message Date
Peter Barker 1a2b960b0d GCS_MAVLink: prune old statustexts from queue 2021-04-06 09:10:43 +10:00
Peter Barker 4027ed6070 GCS_MAVLink: make servicing statustext more efficient
We should only need to do a single PAYLOAD_SIZE check for each mavlink
backend now.

 - stop iterating over all channels, only do instantiated mavlink
backends
 - if we don't have space for a statustext on a channel, break
immediately and don't do remaining texts
 - resposibility is now on the GCS_MAVLINK backend for sending texts
   - that's a timing change

 - only iterate over entries actually in the queue rather than maximum
queue size
   - it's likely to be the full length anyway as we don't expire things
from the queue and most setups will have full channels
2021-04-06 09:10:43 +10:00
Iampete1 0fe38da522 GCS_MAVLink: rename battery reset function 2021-03-31 19:21:59 +11:00
Peter Barker 115e895c82 GCS_MAVLink: return MAV_RESULT_FAILED from do_aux_function if invalid function 2021-03-31 11:36:09 +11:00
Peter Barker 2d61ded1f3 GCS_MAVLink: add option to execute auxillary functions via mavlink 2021-03-31 11:36:09 +11:00
Randy Mackay b8f9c3b9c0 GCS_MAVLink: use of AP_Proximity checks HAL_PROXIMITY_ENABLED 2021-03-26 16:22:46 +09:00
Peter Barker 5123b05b2b GCS_MAVLink: add support for ATTITUDE_QUATERNION 2021-03-13 09:44:12 +11:00
James O'Shannessy f028747399 GCS_MAVLink: Remove todo since plane now supports MAV Protocol Capability Mission Fence 2021-03-05 16:48:57 +11:00
James O'Shannessy c2abf27d78 GCS_MAVLink: Add reporting of fence floor breaches to GCS_MAVLink
GCS_MAVLink: Add disabling of fence floor only, per mavlink spec

GCS_MAVLink: Cannot enable a fence if the fence is not present
2021-03-05 14:52:46 +11:00
Peter Barker e3de88d1d4 GCS_MAVLink: handle MAV_CMD_DO_SET_MISSION_CURRENT 2021-03-04 11:59:33 +11:00
Peter Barker 7480a2a00b GCS_MAVLink: correct output of AHRS2 mavlink message
The || here was causing short-circuiting
2021-03-02 20:48:36 +11:00
Peter Barker 9932aa99f7 GCS_MAVlink: return identical seq in MISSION_CURRENT if possible after set
// because MISSION_SET_CURRENT is a message not a command,
        // there is not ACK associated with us successfully changing
        // our waypoint.  Some GCSs use the fact we return exactly the
        // same mission sequence number in this packet as an ACK - so
        // if they send a MISSION_SET_CURRENT with seq number of 4
        // then they expect to receive a MISSION_CURRENT message with
        // exactly that sequence number in it, even if ArduPilot never
        // actually holds that as a sequence number (e.g. packet.seq==0).
2021-02-24 19:00:34 +11:00
Peter Barker cfe9dc32d1 GCS_MAVLink: only send distance_sensor messages if valid data seen
In the case you only have a forward-pointing LIDAR we'd send messages
for each of the other orientations from proximty's horizontal-distances
array, chewing up bandwidth and processing time.
2021-02-23 10:02:47 +09:00
Peter Barker c5e62eb6e4 GCS_MAVLink: schedule current waypoint rather than immediate send
This message may not fit in our outgoing buffer
2021-02-23 11:27:22 +11:00
Patrick José Pereira ba2adac869 GCS_MAVLink: Simplify boolean expression
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-23 10:30:05 +11:00
Peter Barker 1afa0a7ff2 GCS_MAVLink: remove unused member
and a bogus comment
2021-02-20 21:48:25 +11:00
Peter Barker eefcc92f24 GCS_MAVLink: take MAV_CMD_DO_SPRAYER as a mavlink command 2021-02-16 22:36:43 +11:00
Peter Hall c1a831bbf4 GCS_MAVLink: sensor flags, only mark AHRS as enabled once initialised 2021-02-16 12:54:28 +11:00
Andrew Tridgell 6d1511f3eb GCS_MAVLink: added method to force save calibration
useful after reloading parameters
2021-02-15 07:24:40 +11:00
Mark Whitehorn bb15c18cc3 GCS_MAVLink: send message when MAVFTP init fails 2021-02-10 23:06:36 +11:00
murata 698f967b63 GCS_MAVLink: Notify the maximum number of missions
Update libraries/GCS_MAVLink/MissionItemProtocol.cpp

Co-authored-by: WickedShell <Wicked.Shell.Scripts@gmail.com>

GCS_MAVLink: Notify the maximum number of missions
2021-02-03 20:31:50 +11:00
Patrick José Pereira e8e41c512e GCS_MAVLINK: Add missing const in member functions
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Rishabh a5fafe57d8 GCS_MAVLink: Add support for OBSTACLE_DISTANCE_3D 2021-02-01 14:34:13 +09:00
Andrew Tridgell 1716fcf995 GCS_MAVLink: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Peter Barker e32ca819fc GCS_MAVLink: mark results as unused 2021-01-21 20:41:17 +11:00
Peter Barker e58d2ecf2f GCS_MAVLink: add mavlink command option to create a 250ms long loop 2021-01-21 11:35:57 +11:00
yaapu 1c3b7d5ecd GCS_MAVLink: added support for passthrough telemetry over crossfire 2021-01-20 18:06:24 +11:00
Pierre Kancir 30a4747898 GCS_MAVLink: send sim_state msg 2021-01-19 10:40:43 +11:00
Andrew Tridgell ed8d86e5e6 GCS_MAVLINK: support deliberate parameter corruption 2021-01-16 06:47:10 +11:00
Peter Barker 3d577d94e8 GCS_MAVLink: add do_disarm_checks boolean to disarm call
this creates symmetry between arming and disarming, at least as far as
the top-level arm() and disarm() calls are concerned.
2021-01-12 08:48:44 +09:00
Peter Barker 0052500d67 GCS_MAVLink: split out a handle_command_component_arm_disarm 2021-01-12 08:48:44 +09:00
Brad Bosch a2192eda5e GCS_MAVLink: use RADIO_STATUS message txbuf field
this avoids overrunning radio buffer in queued_param_send()
2021-01-12 10:46:15 +11:00
Andrew Tridgell 882d9c4e23 GCS_MAVLink: adjust stack sizes 2021-01-10 08:28:55 +11:00
Peter Barker d24e569b20 GCS_MAVLink: add option to panic the autopilot 2021-01-05 10:04:25 +11:00
Peter Barker b8827e6486 GCS_MAVLink: allow control to be return to radio for higher-numbered RC_CHANNELS_OVERRIDE 2020-12-29 15:03:34 +11:00
Peter Barker 6f4bbd3f57 GCS_MAVLink: for high RC_CHANNELS_OVERRIDE channels zero means ignore the field 2020-12-29 15:03:34 +11:00
Andrew Tridgell e6c5382a28 GCS_MAVLINK: fixed FPE in DO_SET_ROI
this prevents a floating point exception when MissionPlanner sends an
invalid DO_SET_ROI

See https://github.com/ArduPilot/MissionPlanner/issues/2528
2020-12-28 11:53:03 +11:00
Dr.-Ing. Amilcar do Carmo Lucas d76825feeb GCS_MAVLink: adapt to upstream changes in the distance_sensor mavlink message 2020-12-19 19:54:03 +11:00
Andrew Tridgell 6df118e7b4 GCS_MAVLink: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 1d0e7d2974 GCS_MAVLink: Added cells 11...14 voltage information (13 and 14 are 0 for now) 2020-12-11 06:37:32 +11:00
Andrew Tridgell 5e3bf0a703 GCS_MAVLink: implement BRD_OPTIONS bit for setting of internal parameters 2020-12-08 13:22:17 +11:00
Andrew Tridgell 8b5ff1a6de GCS_MAVLink: enable GCS_SEND_TEXT() to send as CAN LogMessage messages 2020-12-04 15:16:21 +11:00
Peter Barker 88895f9b13 GCS_MAVLink: stop using one backend's signing structure for all backends 2020-11-30 14:11:08 +11:00
Gone4Dirt caf1ad28d5 GCS_Common: AP_Generator_Richenpower is now AP_Generator 2020-11-24 12:54:52 +11:00
Peter Barker f0c22244a5 GCS_MAVLink: correct response codes when mode change fails
Was "UNSUPPORTED", which is supposed to mean, "Command is not supported"

Now is either "DENIED" (Command is invalid (is supported but has invalid
parameters)) or "FAILED" (Command is valid, but execution has failed.)

We should probably returned DENIED if we try to change to a mode which
doesn't exist, but that would require another callback on AP_Vehicle.
It would also lead to questions around what a valid mode is - so
QSTABILIZE if quadplane is disabled in Plane, for example.
2020-11-24 10:09:37 +11:00
Hwurzburg 6eca18c08b GCS_MAVLink: add Board option to disable MAVftp in low mem bds/apps 2020-11-17 10:41:59 +11:00
Andrew Tridgell 9c74474196 GCS_MAVLink: setup baudrates for passthru serial ports 2020-11-17 10:26:14 +11:00
Peter Barker 41943f5fda GCS_MAVLink: correct use of uninitialised value in Rally upload 2020-11-11 18:22:58 +11:00
Andy Piper 4d1c660ebc GCS_MAVLink: enable OSD parameters on parameter enablement 2020-11-11 18:13:11 +11:00
Andrew Tridgell 147df12eb8 GCS_MAVLink: allow replay to use GCS_Dummy 2020-11-10 16:15:45 +11:00