58d3729d16
AP_InertialSensor: fixed default health functions
...
this fixes INS on APM1. Thanks to Mike McCauley for noticing this!
2014-01-22 22:08:28 +11:00
2753449e75
AP_InertialSensor: added support for multiple accel/gyro devices
...
this makes it possible to ask for the gyro and accel vectors from
secondary INS devices.
2013-12-09 17:34:05 +11:00
f10a4b04ae
AP_InertialSensor: make PX4 healthy call _get_sample()
...
this prevents a false positive during times like arming where we are
not reading the sensors
2013-11-10 17:03:16 +11:00
9ecd889e9d
AP_InertialSensor: detect bad MPU6000 SPI transactions and lower bus speed
...
this uses bad data or bad INT_STATUS values from the MPU6000 to detect
the sensor running too fast and lower bus speed
2013-11-07 12:48:17 +11:00
b98bcbf715
AP_InertialSensor: automatically lower bus speed on mpu6k bad reads
2013-11-07 12:48:16 +11:00
bdc40cc7df
AP_InertialSensor: try to lower SPI bus speed on errors
2013-11-07 12:48:16 +11:00
e5e4cdee18
AP_InertialSensor: added wait_for_sample() API call
...
this waits for a new INS sample to arrive, using whatever method is
most efficient on each INS type
2013-10-08 17:31:15 +11:00
03036c632d
AP_InertialSensor: use new scheduler API
2013-09-28 21:24:03 +10:00
f7ba0438ef
InertialSensor: remove DMP
...
this saves 3K of flash
2013-09-27 10:43:33 +09:00
14636e1cdf
AP_InertialSensor: changed num_samples_available() to sample_available()
...
this makes the interface clearer. It also fixes a 3D accel cal bug.
2013-09-27 10:49:00 +10:00
7b1245937c
AP_InertialSensor: always sample at 200Hz in MPU6000
...
this changes the sampling to 200Hz regardless of requested rate, and
it is downsampled inside num_samples_available() using a shift. This
gives better noise resistance in ArduPlane.
This patch also makes it possible to update the filter frequency while
running, which is very useful for bench testing with a vibration
source
2013-02-07 10:23:08 +11:00
6142eac4b4
AP_InertialSensor: simplify get_delta_time() API
...
use a single float return rather than two APIs.
This also changes the MPU6k driver to match the new 2.9 behaviour of
using the MPU6k sample timing instead of micros()
2013-01-11 21:17:21 +11:00
910e09fc96
AP_InertialSensor_MPU6000: fix sync/async semaphore usage with new scheduler
2013-01-10 14:12:19 -08:00
d808c19c10
AP_InertialSensor_MPU6000: uses new semaphores
...
* some refactoring to fix differences between timerprocess
and non-timerprocess usage
2013-01-03 13:48:07 -08:00
acf05a29ee
AP_InertialSensor_MPU6000: Poll status register if there is no data ready pin.
2013-01-03 13:48:06 -08:00
212728be34
InertialSensor: ensure MPU6000 is out of sleep mode before configuring
...
the MPU6000 starts in sleep mode, and can take a while to wakeup
2012-12-27 21:28:41 +11:00
1a53bc783c
InertialSensor: poll data ready pin instead of an interrupt for MPU6k
2012-12-22 09:16:31 +11:00
9548e7e79e
InertialSensor: simplify the data_ready interrupt handling
...
this avoids using the defer process code, and fixes a nasty bug that
caused the APM to lockup on reset
2012-12-21 20:01:19 +11:00
2c1682f310
InertialSensor: use AP_HAL progmem
2012-12-20 14:51:39 +11:00
4acf2c8591
AP_InertialSensor: ported to AP_HAL
2012-12-20 14:51:26 +11:00
3b18c57691
AP_InertialSensor: removed axis getters for accel/gyro
...
these were only being used in one place, and in that place were used
incorrectly!
2012-12-04 09:11:55 +11:00
b237c0583d
AP_InertialSensor: Added INS_MPU6K_FILTER option
...
this allows the user to select the MPU6000 filtering frequency
2012-11-30 07:15:19 +11:00
089ae0f9f3
AP_InertialSensor: allow specification of sample rate in init() call
...
this lets the caller not need to know the underlying sample rate. They
just ask for what rate updates happen.
This also changes the MPU6k filtering to be less than half the sample
rate
2012-11-30 07:15:18 +11:00
d9b4407e64
AP_InertialSensor: changes after review with Tridge.
...
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
2012-11-07 19:21:15 +09:00
49de46a548
AP_InertialSensor: merge in calibration features from IMU library
...
add gauss-newton method of accelerometer calibration
2012-11-07 19:20:27 +09:00
41fbb19cf5
AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory
...
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
2012-09-28 19:21:59 +09:00
7a265dbf61
AP_InertialSensor: use AP_TimerProcess's queue_process to run read from MPU6000 after any currently running processes complete
2012-09-10 11:38:03 +09:00
0a6219695b
AP_InertialSensor: changed read of sensor from MPU6000 to happen immediately
...
This reduces the delay between when data arrives and when it is used
by up to 1ms.
Added num_samples_available method to all InertialSensors to allow
main loop timing to be synced with sensors.
2012-09-10 11:37:33 +09:00
ad51ac5e11
uncrustify libraries/AP_InertialSensor/AP_InertialSensor_MPU6000.h
2012-08-21 19:03:14 -07:00
7683e9d870
AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully)
...
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
2012-07-28 16:33:04 +09:00
6cd0918134
AP_InertialSensor: methods added to access DMP functionality
2012-07-28 14:14:43 +09:00
acc6adf6e9
MPU6k: removed an unused variable
2012-06-29 21:54:09 +10:00
4a1d8b0875
AP_InertialSensor: Return product ID from sensor initialization
...
this exposes the product ID to the IMU Layer
2012-05-09 18:30:36 -07:00
9296ac494d
AP_InertialSensor: added a get_gyro_drift_rate() interface
...
this returns the expected max drift rate for the particular type of
gyro being used
2012-03-10 10:34:33 +11:00
a9dea35310
AP_InertialSensor: added new_data_available() interface
2012-03-10 10:34:28 +11:00
6ca613337b
MPU6000: protect the driver from double initialisation
...
initialising twice can lockup the driver
2011-12-28 16:00:48 +11:00
18d26dc74e
MPU6000: minor fixes
...
the hardware functions should be private, and cs_pin should be uint8_t
2011-12-28 16:00:48 +11:00
10ca54ef8f
MPU6000: use data ready interrupt to prevent stale data
...
We listen for a data ready interrupt and only read new data in read()
if there is new data
2011-12-26 19:17:11 +11:00
f97b405b56
MPU6k: update driver for new ap_proceduce prototype
2011-12-21 23:31:38 +11:00
97f8d21c1b
added code format markers to AP_InertialSensor library
2011-12-21 23:31:38 +11:00
82b48784ef
purple: added AP_InertialSensor library
...
this abstracts the way of getting inertial sensor (gyro and
accelerometer) data for the APM1 and purple hardware. The Oilpan code
is based closely on the old APM1 code
2011-11-25 20:00:16 -08:00
Andrew Tridgell
Randy Mackay
Pat Hickey
James Bielman
uncrustify
Craig Elder