Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
42,556 Commits 71 Branches 508 Tags 670 MiB
Commit Graph

158 Commits

Author SHA1 Message Date
Henry Wurzburg 6c730ccfec Plane: start tailsitter forward transition from current pitch angle 2020-04-21 09:50:57 +10:00
Andrew Tridgell c6a6427d6a Plane: prevent lidar glitches from triggering land final 
this prevents short term lidar glitches from triggering the change
from descend to final in quadplane
 2020-02-27 13:15:46 +11:00
Randy Mackay f2ab428cdd Plane: rename update_throttle_mix 
was called update_throttle_thr_mix
also minor format fixes
 2020-02-25 16:52:40 +09:00
Gone4Dirt 760909d046 Plane: Prevent FS action overiding VTOL land 2019-12-31 11:42:59 +11:00
Mark Whitehorn 56b2c697d2 Plane: change tailsitter_input to bitmask 
update parameter metadata for Q_TAILSIT_INPUT and Q_FRAME_TYPE
 2019-12-18 08:33:29 +11:00
Mark Whitehorn 14fc6c5446 Plane: add logging for tailsitter gainscaling and clean up tailsitter body-frame roll input handling 
fix metadata for tailsitter param GSCMSK
rework roll/yaw scaling for body-frame roll options
add constraints on body-frame roll and yaw inputs
move speed_scaler logging into QTUN message
 2019-12-18 08:33:29 +11:00
kd0aij 95da094bfe Plane: update tailsitter speedscaling logic 
add tailsitter gain scaling option mask and logging
tailsitter qassist bugfix; thanks, @iampete
apply roll limit in tailsitter bodyframe roll control
add define for future exclusion of tailsitter gainscaling debug code/logging
tailsitter bodyframe roll and qacro input scaling bugfixes:
  respect Q_TAILSIT_RLL_MX and roll/yaw scale parameters in bodyframe roll modes
  fix unintended swap of Q_ACRO_RLL/YAW_RATE params in QACRO mode
don't scale motor tilt

Co-authored-by: IamPete1 <33176108+IamPete1@users.noreply.github.com>
 2019-12-18 08:33:29 +11:00
Andrew Tridgell 36baaeb3a0 Plane: added option to run idle governor in MANUAL mode 
useful for quadplane testing
 2019-11-17 20:10:54 +11:00
Andrew Tridgell e5bad28f1d Plane: added Q_ASSIST_ALT parameter 
this allows for quadplane assistance in fixed wing modes when the
aircraft drops below a given altitude. This could help save an
aircraft that is flying badly in fixed wing mode
 2019-11-09 20:17:36 +11:00
Mark Whitehorn 1a2abae902 Plane: reduce QTUN log rate to 25Hz 2019-10-20 06:24:46 +11:00
sas 9405fd6958 Plane: remove unused location argument to control_auto 2019-10-08 10:49:51 +11:00
Andrew Tridgell 5c43b18672 Plane: fixed height_above_ground() for case when rangefinder is below min 
this prevents a rangefinder that goes below min distance from causing
the calculations that depend on height above ground to fail
 2019-09-17 09:36:26 +10:00
Michael du Breuil 4f22dff14d Plane: Add an airspeed limit for quadplane takeoffs 2019-09-09 22:06:25 -06:00
Michael du Breuil 77afcf6a1b Plane: Abort takeoffs that take to long to complete 2019-09-09 22:06:25 -06:00
Hwurzburg 44f6f7335e Plane: Added Quadplane option for QRTL failsafe action 2019-07-05 11:25:56 +10:00
IamPete1 76663d66e8 Plane: support bicopter tiltrotors 2019-07-02 10:15:17 +10:00
Mark Whitehorn 4a7ce1b384 Plane: clean up qacro 2019-05-08 08:44:52 +10:00
Mark Whitehorn f054301ec2 Plane: add QACRO roll/pitch/yaw rate params 2019-04-23 09:46:38 +10:00
Mark Whitehorn 8bcf2439ad Plane: quadplane stabilize manual throttle midpoint and expo 
move throttle curve logic to AP_Math

use parameter THROTTLE_EXPO in get_pilot_throttle
 2019-04-23 09:46:38 +10:00
Tom Pittenger 0270c57530 Plane: massive refactor and creation of Mode class 2019-04-02 16:28:52 +11:00
Mark Whitehorn e0765747e7 Plane: add new tailsitter bodyframe roll option 2019-03-26 14:50:37 +11:00
Peter Barker 1a55f0ffab Plane: FrSky support has moved to GCS 2019-03-19 14:39:14 +11:00
Andrew Tridgell 2b6210d594 Plane: use WP height for height above ground in vtol landing 
this allows for landings above or below the takeoff height without
requiring the use of terrain data. It allows both the use of vfwd
motor for holding against wind, and the correct height for land final
descent rate
 2019-03-18 14:47:27 +11:00
Peter Barker cf45b54070 Plane: quadplane use prearm checks from Attitude and Position controllers 2019-03-12 10:14:14 +11:00
Mark Whitehorn 4a6b97828f ArduPlane: add tailsitter input type TAILSITTER_INPUT_BF_ROLL 2019-03-06 15:48:51 +11:00
Mark Whitehorn 6e4a2b97f9 ArduPlane:add subclass for copter tailsitters 
cleanup and add tailsit_motmx
add constexpr and motor mask check
add support for tricopter tailsitter
don't call output_motor_mask unless armed
fix whitespace
 2019-03-06 07:53:46 +09:00
Mark Whitehorn 487ad7a90f Plane: add QACRO mode for quadplanes 
use acro_r/p/y_rate params in qacro
port ACRO throttle handling from copter

handle non-tailsitter controls
 2019-03-05 10:13:20 +11:00
Andrew Tridgell 136e10a781 Plane: handle VTOL landing with incorrect height 
if landing above expected height then run landing detector to allow a
switch from LAND_DESCEND to LAND_FINAL

this prevents the plane sitting on the ground until the battery runs
out
 2019-02-26 11:12:58 +11:00
Michael du Breuil b290148ed0 Plane: Don't overwrite the quadplane loiter relax 2019-02-23 11:08:21 +11:00
Michael du Breuil c15983c690 Plane: prevent loss of control when Q_ENABLE is set while flying 
Also rename check_throttle_suppression
 2019-02-21 21:38:03 -07:00
Mark Whitehorn 95b3a5bacd ArduPlane: implement hover throttle learning for quadplanes 
disable by default
check quadplane.enable in update_hover_learn
 2019-02-16 19:04:13 -08:00
Mark Whitehorn b9f3118374 Plane: allow changing Q_TRIM_PITCH in flight 
change float comparison to is_equal
 2019-02-12 09:42:19 +11:00
Michael du Breuil df1632054e Plane: Update throttle mix 2019-02-05 11:05:54 +11:00
Michael du Breuil d6cac4b52a Plane: Add a failure timer for quadplane forward transitions 
Falls over to QLAND if we fail to transition
 2019-01-08 10:52:12 +11:00
Michael du Breuil 69c87c6c4a Plane: Disallow arming if quadplane has been requested but isn't available 2018-12-28 18:09:21 +11:00
Andrew Tridgell d3afc9424a Plane: make QTUN logging match copter logging 2018-12-21 22:17:52 +11:00
Michael du Breuil 1a45755ffd Plane: Support a different landing radius for quadplane fw approach 2018-12-18 10:11:22 +11:00
Nikhil Upadhye d1e93bae83 Plane: adding new mode QAUTOTUNE 
copter like autotune support for quadplanes and tailsitter in VTOL mode.

cleanup
 2018-12-14 16:33:11 +11:00
Randy Mackay 71708ee4ea Plane: quadplane uses set_defaults_from_table 2018-12-06 12:23:41 +09:00
IamPete1 c6e70c0454 Plane: add roll limit for tailsitters 
Quadplane: add tailsitter pitch params
 2018-12-01 09:40:07 +11:00
Andrew Tridgell c59b2c156a Plane: fixes for Q_TRIM_PITCH 
improved documentation and variable names
 2018-11-12 17:05:04 +11:00
IamPete1 5a7bd61e8c Quadplane: add trim params 2018-11-12 17:05:04 +11:00
Michael du Breuil 8e906e0ba0 Plane: Add support for a loiter to alt approach to VTOL landing 2018-11-10 18:58:54 +11:00
Michael du Breuil b6efc8a20b Plane: reduce some copy pasted code 2018-09-20 13:47:21 -07:00
Andrew Tridgell ef154cf3fa Plane: fixed relaxing of attitude controller on transition 
this fixes an issue found by Leonard where the attitude controller
could have residual control left over from a previous transition when
engaging the VTOL attitude controller
 2018-09-15 11:00:29 +10:00
Michael du Breuil f9e56f9d12 Plane: Respect frame type on VTOL_TAKEOFF commands 
allow missioncommands to fail to start
 2018-09-11 06:42:00 +10:00
Michael du Breuil 925d76bb8c Plane: Small cleanup to quadplane const (and clarity) 2018-09-04 15:11:41 +10:00
Michael du Breuil 3d923d0572 Plane: Send a quadplane version of NAV_CONTROLLER_OUTPUT 2018-08-07 09:49:01 +10:00
IamPete1 20c67019b0 Plane: added Q_TAILSIT_THSCMX 
this provides more flexibility in tailsitter throttle scaling
 2018-07-19 09:48:25 +10:00
Randy Mackay 840a6e4147 Plane: quadplane uses AC_Loiter 
includes param conversion
 2018-04-04 10:45:10 +09:00