Commit Graph

124 Commits

Author SHA1 Message Date
rmackay9 b3ff368589 ArduCopter: position lead filters modified to use lag which varies by gps 2012-09-20 15:49:09 +09:00
uncrustify d49df965f3 uncrustify ArduCopter/navigation.pde 2012-08-21 19:19:50 -07:00
Jason Short 77f47a45d0 ACM : Nav rate limit lowered to prevent bad oscillations due to GPS latency. 2012-08-18 09:04:22 -07:00
rmackay9 64cfaf74b7 ArduCopter: renamed "_new_alt" parameter to just "new_alt" in force_new_altitude and set_new_altitude functions 2012-08-18 21:46:48 +09:00
Jason Short 1b7e27658b ACM : removed old note 2012-08-17 17:03:40 -07:00
Jason Short bdc1c41e62 ACM: made target bearing the lead filtered location
Had some major nav trouble from crosstrack if I used the laggy position.
2012-08-16 15:38:25 -07:00
rmackay9 36f947acb9 ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
rmackay9 a72bf6ef57 ArduCopter: replaced abs with labs as required in a few places.
Also fixed a small bug in the get_stabilize_pitch function in which it was using the roll (instead of pitch) to decide whether it should let the i term build-up or not.
2012-08-16 17:51:09 +09:00
Jason Short f1af837543 ACM: Switched to filtered loc 2012-08-14 14:11:52 -07:00
Jason Short 3ad08b7ffc ACM : Added larger WP radius for fast waypoints so we don't loose speed angling in on the WP at the last second. 2012-08-10 10:02:32 -07:00
Jason Short adf5939ba4 ACM: navigation - Alt cleanup, fast corner support 2012-08-09 16:59:44 -07:00
Andrew Tridgell fb26160d3b ACM: change to use get_bearing_cd() instead of get_bearing() 2012-08-08 12:12:30 +10:00
Jason Short 1d085c8cf4 Added minimum speed for RTL 2012-07-20 13:27:35 -07:00
Jason Short f46e8468c4 Arducopter: Adjusted speed of climb to not stall out before hitting peak 2012-07-19 17:53:49 -07:00
Jason Short 6506ebf69f Arducopter: Fix compile issue 2012-07-19 10:09:16 -07:00
Jason Short 2df487ab7b Arducopter: Slower WP deceleration for RTL and WP navigation
Slower descent and slightly faster ascent
2012-07-19 09:50:18 -07:00
Jason Short c995749aaa Arducopter
upped nav max to 32deg from 30
renamed calc_desired_speed to get_desired_speed
Added get_desired_climb_rate function to do smooth transitions in altitude
modified get_altitude_error to override the older altitude manager.
2012-07-18 22:57:11 -07:00
Jason Short f73a2004be Arducopter: INS
updated Nav control to use INS
2012-07-18 22:57:10 -07:00
Jason Short 3048d2f9b4 Arducopter: WP_radius
Switching to stored WP_radius in meters, just like Arduplane
2012-07-10 21:53:38 -07:00
Andrew Tridgell be763a6ead ACM: use get_distance_cm() not get_distance()
this fixes a bug introduced in 28f2eb6b9
2012-07-11 07:50:07 +10:00
Jason Short 038116f521 Airspeed patch:
pre-calculated airspeed resistance pitches copter automatically to gain a certain speed allowing the speed controller to work off of a better set point - similar to Alt hold.
added param tilt_comp with a default of 54 which equals 19.5° of pitch to go 6m/s
upped Z and Y target speeds to int32_t for speed squared calculation
2012-07-09 13:13:32 -07:00
Andrew Tridgell 5ed345fe94 ACM: removed some Location functions which are now in AP_Math 2012-07-04 13:44:36 +10:00
Jason Short c29a0bc3f8 Navigation
increased speed governor to get faster WP travel
added param for WP tilt - basically a precalculated I term for wind resistance.
2012-07-03 17:34:50 -07:00
Jason Short 1a6549fef7 removed GPS ground speed calc - was causing some funny business during the transition. 2012-07-03 17:16:14 -07:00
Jason Short eea788b63f navigation.pde : Added a drag/velocity prediction filter for improved I term wind correction. 2012-06-29 21:20:28 -07:00
Jason Short 53d2a46cd6 Navigation.pde : removed old cross tracking from Arduplane. Added new 2D cross tracking. Added use of GPS velocity when above 1.5m/s 2012-06-25 23:06:28 -07:00
Jason Short c42f9ece43 Inertial Control
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
Jason Short 9732b7d2dc navigation.pde:
removed unneeded WP_Distance check
remove unneeded return for Navigate
removed unneeded rate_D calcs
removed unused functions
2012-05-17 11:05:05 -07:00
Jason Short d1cd04486a removed retro loiter code since Angel has a branch now.
shrank speed filter to avoid latency
removed unused forward estimator code

placed code for switchover to gps.groundspeed at 1.5m/s

added clamp for D term when below .5m/s to eliminate noise

added hybrid I-term based on speed error and position

changes Loiter D term to use position rather than acceleration to avoid noise
2012-05-15 22:14:23 -07:00
Adam M Rivera b2a7227ae7 ArduCopter/Navigation: Updated code to reference the new g.retro_loiter param instead of the compile define. 2012-04-23 00:19:18 -05:00
Adam M Rivera 1676e09f12 navigation.pde: Put the new calc_GPS_velocity method in a compiler if that checks the new RETRO_LOITER_MODE config value (saves space and ensures its not being used unless retro loiter mode is enabled) 2012-04-19 10:21:04 -05:00
Adam M Rivera d29f1ef331 Loiter: Made the "retro loiter" routines configurable. Add RETRO_LOITER_MODE ENABLED to APM_Config.h to enable the older loiter shtuff. 2012-04-19 10:16:29 -05:00
Adam M Rivera d4a4641ae6 navigation.pde: Added calc_GPS_velocity. Added constraint to x/y error and x/y rate error. 2012-04-18 23:06:15 -05:00
rmackay9 fad162989f ArduCopter - navigation.pde - added logging of Loiter PID controllers 2012-04-11 23:52:25 +09:00
rmackay9 66c4f752e3 ArduCopter - navigation - corrected comment in check_missed_wp function to clarify that you've passed the waypoint when the direction to the way point is more than 100 degrees off (not 10 degrees off) from your original bearing towards the waypoint 2012-03-20 17:11:22 +09:00
rmackay9 22315cd41a ArduCopter - Navigation.pde - corrected comment re wp_distance and get_distance to clarify that they are in cm (not meters!) 2012-03-20 16:13:38 +09:00
rmackay9 91b2b48fd8 ArduCopter - bug fix to calc_XY_velocity (was using uninitialised last_longitutde and last_latitude for speed calculations) 2012-03-18 12:11:12 +09:00
Jason Short 427dacba70 ACM: Smoother Speed calcs 2012-03-16 14:10:19 -07:00
Jason Short 7153b94ade ACM: Disabled D term experiment for Loiter until more testing 2012-03-15 19:20:03 -07:00
Jason Short 468d9c4b4f ACM: Loiter D performance updates 2012-03-13 10:23:31 -07:00
Jason Short 73e2bd6cd8 ACM: Got the sign wrong. I'm using the derivative of the error now and not the sensor, so the sign was reversed. 2012-03-12 13:11:05 -07:00
Jason Short deed802d1a ACM: Broke out the D term for the PID loop to add custom filtering. The current AC_PID filtering wasn't working for this application and we needed more smoothing. Bad pitch oscillations were being transmitted to the copter. 2012-03-11 23:21:49 -07:00
Jason Short 450f89ec5d ACM: Added note about scaling rates 2012-03-10 12:43:28 -08:00
Jason Short eb53200179 ACM: Altered the scaling speed for altitude changes for faster rises. 2012-03-10 12:43:01 -08:00
Jason Short 204f9957b0 ACM: Added force_new_altitude call to do immediate changes in altitude and no gradual changes. 2012-03-10 12:42:22 -08:00
rmackay9 afc4aceb32 ArduCopter - fixed small compile warning about unused x_iterm and y_iterm in navigation.pde 2012-03-11 01:27:58 +09:00
Jason Short 6e53949c2a removed Constraint that caused JLN's horizontal drift. 2012-02-26 11:33:37 -08:00
Jason Short 24345d4f43 Loiter updates 2012-02-23 22:03:26 -08:00
Jason Short 81a861c8ac Added slow wp option in calc_desired_speed 2012-02-19 13:13:21 -08:00
Jason Short bcd5129f9b added workaround for resetting alt. 2012-02-19 12:40:08 -08:00