Andrew Tridgell
54ffdc57f2
AP_Airspeed: support external AHRS airspeed sensor
2023-12-17 09:47:30 +11:00
Mykhailo Kuznietsov
fb2bf42cf6
AP_Airspeed: Fix some typos
...
Fixed some typos found in the code.
2023-10-12 18:30:42 +11:00
Peter Barker
c88a53b662
AP_Airspeed: tidy AP_Airspeed includes, use AP_AIRSPEED_ENABLED properly
2023-07-18 11:03:07 +10:00
Peter Barker
d7ec1e7b0c
AP_Airspeed: add support for mavlink in-progress message
2023-02-21 17:07:41 +11:00
Iampete1
58ac399aa9
AP_Airspeed: add allocare method for periph
2023-01-03 10:17:56 +11:00
Iampete1
a20c07b745
AP_Airspeed: add global enable parameter
2023-01-03 10:17:56 +11:00
Iampete1
0bb7e8a789
AP_Airspeed: add param conversion to per-instance
2023-01-03 10:17:56 +11:00
Gone4Dirt
0138d0c2cc
AP_Airspeed: move params to seperate file
2023-01-03 10:17:56 +11:00
Iampete1
e142747d1f
AP_Airspeed: Periph: remove useage of hidden params and remove tuber order
2022-12-20 11:12:25 +11:00
Henry Wurzburg
08840b4a65
AP_Airspeed: add warning for large offset cal
2022-12-13 17:08:42 +11:00
Andrew Tridgell
dc5492f9ca
AP_Airspeed: support DroneCAN airspeed with hygrometer data
...
some DroneCAN airspeed sensors can send hygrometer data, for when they
have de-icing support
2022-10-19 13:17:30 +11:00
Paul Riseborough
ed271e8025
AP_Airspeed: Enable use of EKF3 to check airspeed health
2022-09-26 14:17:53 +10:00
Peter Barker
a840af1ff5
AP_Airspeed: stop using GCS_MAVLINK.h in header files
2022-08-16 09:45:51 +10:00
Peter Barker
dd2283d73b
AP_Airspeed: add SITL backend
2022-05-25 17:52:44 +10:00
Peter Barker
4b95ad12bf
AP_Airspeed: allow backends to be compiled out
2022-05-10 09:02:51 +10:00
Gone4Dirt
2ff83bea53
AP_Airspeed: Add enabled check to get functions
2022-05-05 17:44:16 +10:00
Gone4Dirt
edb25340d1
AP_Airspeed: Move multi-line functions out of header
2022-05-05 17:44:16 +10:00
Peter Barker
9b14760dc9
AP_Airspeed: tidy includes
2022-05-03 09:14:58 +10:00
Peter Barker
deb7b13da5
AP_Airspeed: disable AUTOCAL if airspeed is disabled
2022-03-15 08:52:37 +11:00
Iampete1
72a65cadb8
AP_Airspeed: rename get_health_failure_probability to get_health_probability
2022-03-02 16:14:50 +11:00
Joshua Henderson
3cfbad0f4d
AP_Airspeed: add AP_AIRSPEED_ENABLED
2022-01-19 18:21:32 +11:00
Andrew Tridgell
f65620f4f3
AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
...
this saves a lot of flash by only including specific drivers
2021-09-21 13:51:40 +10:00
Peter Barker
16c11fc4fa
AP_Airspeed: allow zero offset if we are skipping calibration
2021-09-15 17:52:34 +10:00
Andrew Tridgell
0bdd8231cf
AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction
...
if the MS4525 has its own LDO then we are should disable the
correction
2021-07-12 17:14:59 +10:00
Andrew Tridgell
ca1508b02e
AP_Airspeed: added DEVID parameters for airspeed
...
this makes log analysis easier
2021-07-12 17:14:59 +10:00
Peter Barker
6da68e39f8
AP_Airspeed: add rc channel option to disable all airspeed sensors
2021-06-23 15:13:13 +10:00
Michael du Breuil
29d6900888
AP_Airspeed: Remove unneeded initilization
...
We pre zero all memory
2021-06-22 10:08:02 +10:00
Peter Barker
00002b78a4
AP_Airspeed: remove HIL support
2021-06-15 09:47:31 +10:00
QioTek
0190a42e47
AP_Airspeed: added ASP5033 driver
2021-03-28 07:50:34 +11:00
Andrew Tridgell
857d905d9f
AP_Airspeed: added MSP backend
2020-12-08 20:41:12 +11:00
Hwurzburg
615b8add8c
AP_Airspeed: add inflight airspeed cal rc switch
2020-11-25 21:30:15 +11:00
Iampete1
2aff8787c1
AP_Airspeed: add NMEA water speed backend
2020-10-27 11:24:49 +11:00
Iampete1
662d4640ef
AP_Airspeed: add dedicated MAX_WIND param
2020-10-27 11:21:04 +11:00
Andrew Tridgell
505953bdb2
AP_Airspeed: added get_num_sensors()
2020-08-27 20:20:51 +10:00
Josh Welsh
eb4b5fb720
AP_Airspeed: Add additional DLVR support 20inH2O 30inH2O 60inH2O
2020-08-12 08:02:49 +10:00
Michael du Breuil
ceb0a9c827
AP_Airspeed: Rearrange state to save memory
...
Saves 8 bytes per airspeed sensor (2 backends for 8 total), and removes
the unneeded width specifier, which has no impact on used memory, and
saves us 88 bytes of flash because we don't have to do work to shift the
bits around.
2020-05-06 18:15:08 +10:00
Andrew Tridgell
0f6f684bab
AP_Airspeed: expose get_corrected_pressure()
...
needed for AP_Periph
2020-03-25 20:37:00 +11:00
Andrew Tridgell
f51378f2e8
AP_Airspeed: enable for use in AP_Periph
2019-10-21 19:12:01 +11:00
Andrew Tridgell
c173f8e24d
AP_Airspeed: support both 5inH2O and 10inH2O versions of DLVR sensor
...
useful for faster aircraft
2019-07-19 21:39:30 -07:00
Michael du Breuil
e43605cc9b
AP_Airspeed: Remove a number of unneeded top level includes
2019-06-27 14:56:21 +10:00
Peter Barker
5cfba85095
AP_AirSpeed: take EAS2TAS directory from baro; use for all backends
...
Plane was only setting EAS2TAS in the primary frontend; calibration
expected it to be set on each instance.
2019-06-06 12:44:36 +10:00
Peter Barker
f0379ff7f0
AP_Airspeed: move logging of ARSP into Airspeed library
2019-04-09 09:29:35 +10:00
Peter Barker
59ef486da0
AP_Airspeed: add AP::airspeed() to get airspeed singleton
2019-04-09 09:29:35 +10:00
Peter Barker
c25ce2cee8
AP_AirSpeed: move sending of airspeed_autocal into AP_AirSpeed
2019-03-06 11:32:52 +11:00
Tom Pittenger
74299906b1
AP_Airspeed: log health failure probability
2019-02-03 08:25:46 -08:00
ChrisBird
c9af223579
AP_Airspeed: Renaming the check method name and readding the overall option check. This will set it up for future options.
2019-02-03 08:25:46 -08:00
Tom Pittenger
1a04a540f5
AP_Airspeed: convert the defines into static consts
...
- also perform logging at end of update
- convert Options Mask into an enum
2019-02-03 08:25:46 -08:00
ChrisBird
d77906cb06
AP_Airspeed: This adds the ability to turn off and on the airspeed sensor if faulty.
2019-02-03 08:25:46 -08:00
DOMINATOR\Eugene
c81f9e6baa
AP_Airspeed: update data with logging
2018-11-17 07:52:42 +11:00
liang.tang
653766c4cc
AP_Airspeed: uavcan airspeed supported
2018-09-05 17:22:08 +10:00