clang reports this could be a problem when compiling under some EABIs. Remove it from most places as it is just noise, replace with class where we want to avoid including Location.h
L1_dist can become extremely short for slow moving vehicles leading to unnecessarily jerk turns after passing waypoints. This reduces the minimum length along the track that the vehicle will point.
See discussion here:
https://github.com/ArduPilot/ardupilot/issues/7331
we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach
Thanks to assistance from Lucas, Peter and Francisco
This fixes#6637 where the LIM_BANK can be set such that the vehicle demands a radius at sea level that is much higher then the loiter radius was configured to be. This effectively feels like a fly away and is due to bad parameters usually. If this happens just fall back to the simple EAS2TAS scaling of the radius.
threading bug fix. When a mission wp updates, but the L1 controller had not yet, the data is stale. Example, On Plane when NAV_LAND starts for a moment your xtrack and bearing is most likely bear zero regardless if you have a big turn or not until 10 Hz later when the update() gets called and updates those values with correct values for the new waypoint.
if the top level controller doesn't consider a waypoint complete when
we are passed next_WP then it would keep flying away from the line
segment. This doesn't happen with the current master code, but we want
to ensure it is handled
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.
Changes generated with:
git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
Peter Barker
Mark Agate
abaghiyan
jackhong12
Tatsuya Yamaguchi
xianglunkai
murata
Iampete1
Patrick José Pereira
Pierre Kancir
Michael du Breuil
Andrew Tridgell
Randy Mackay
Tom Pittenger
Lucas De Marchi
Dr.-Ing. Amilcar Do Carmo Lucas
Mathieu OTHACEHE
Grant Morphett
Tom Pittenger
dgrat
Don Gagne
Jonathan Challinger