9ed023aeb4
AP_GPS: Builds under AP_HAL. Not tested.
2012-12-20 14:51:25 +11:00
e74e730992
AP_GPS: added velocity_down() call
...
on GPSes with raw velocity support this will be used for DCM
correction
2012-11-05 14:58:40 +11:00
a53cbc08f3
GPS: avoid output delays in the GPS auto detection
...
this sends out the GPS init strings in 16 byte chunks to avoid causing
timing glitches when no GPS is attached
2012-10-18 16:18:32 +11:00
cdaf2f923d
uncrustify libraries/AP_GPS/GPS.cpp
2012-08-21 19:02:32 -07:00
2d47bd0386
GPS: support getting raw velocity values from a UBlox
...
this may give better velocity numbers than the value from COG
2012-08-15 20:06:35 +10:00
618f43bef6
AP_GPS: added last_ground_speed() method
...
used for dead-reckoning in AHRS
2012-08-11 11:59:47 +10:00
37db5247cd
GPS: added velocity and acceleration components
...
used by AHRS for acceleration correction
2012-06-27 16:01:49 +10:00
068fe64b9b
ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float)
2012-06-26 22:50:17 +09:00
70f18289c5
GPS: fixed auto-config of UBlox setup with no UBX messages
...
if a UBlox is configured for NMEA only, with no UBX messages at all
then it would never trigger the GPS_AUTO detection. This adds a UBX
config message to the init strings that enables the NAV_SOL message
2012-06-15 15:53:27 +10:00
33a2ad7e07
GPS: add stub settings for nav_setting in the other GPS drivers
...
only Ublox supports nav_setting so far
2012-06-10 16:34:53 +10:00
cbf477addd
GPS: added debug code to the main GPS class
2012-06-08 16:42:03 +10:00
4dff78b9c0
GPS: expose last_fix_time
2012-03-10 10:34:32 +11:00
57f67ca6e3
GPS: added an acceleration estimate to the GPS driver
...
This uses the GPS ground speed to estimate acceleration
2012-03-10 10:34:30 +11:00
ed19c25a97
Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h".
...
Modified FastSerial's write function to return size_t (number of bytes written).
2012-01-28 12:25:47 +09:00
14d27b1e4c
Cleaned up AP_GPS formatting.
2011-10-28 14:52:50 -04:00
8d7e7ff58e
revert gps lib to 2602
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:38:31 +00:00
5b9e7eff9d
clean up idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:20:39 +00:00
b53b749fc7
Fix initialization of idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2602 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 21:11:45 +00:00
76d072591b
made timeout public, settable
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2563 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:33:08 +00:00
7809b0ca2a
Massive warning fixes.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2089 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-04 19:12:27 +00:00
d36869494f
GPS: fixed the idle timer
...
we need to reset the idle timer only on good data, or a call to
init(). Otherwise we never use it.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1849 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-04 22:00:06 +00:00
00209c82a9
Added setHIL to GPS.cpp
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1686 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-19 18:33:42 +00:00
8da4a29d58
Add support for the DIYD MTK v1.6 firmware
...
Nuke AP_GPS_IMU, as nothing is using it anymore.
Simplify the handling of no GPS/no fix detection.
Fix prototypes for ::init and ::read.
Update AP_GPS_Auto and corresponding example, nearly ready for primetime.
Use uint8_t rather than byte.
Strip some _error() calls to save space. More could still go.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1246 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-24 06:35:09 +00:00
aa115aea68
AP_GPS libs now recover from disconnect or failed initialization.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1188 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-19 13:24:29 +00:00
cb4e8144f4
Eliminate GPS::_error, as it's responsible for pulling in the old printf, which doesn't work anymore. Fixing it's not worth the effort.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@955 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-27 08:46:41 +00:00
2e5be5d86b
Revert the MTK GPS driver to only claiming a fix when the GPS has a 3D solution, per discussion with Paul.
...
Minor tidying and documentation.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@683 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-17 20:13:53 +00:00
0a94520682
Add support for automatically detecting the connected GPS and configuring accordingly.
...
Note that this is currently disabled as changes need to be made to APM to support it.
Tested with MTK, u-blox and SiRF GPS'.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@671 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-17 06:06:04 +00:00
079dd3c617
Changes to accommodate blinking lights and loss of GPS commands. Tested with NMEA, uBlox, Sirf and MTK. Does not function correctly with rmack's changes to APM_Compass posted 10/17/2010 (I don't know why).
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@669 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-17 04:07:46 +00:00
31ab494aaa
Jason's GPS_None pointed out a few changes that in turn drastically simplify it.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@431 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-09-07 05:57:39 +00:00
3e1cd1ea2e
Set native line endings on checkout to help avoid confusion.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@419 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-09-06 20:18:32 +00:00
Pat Hickey
Andrew Tridgell
rmackay9
James Goppert
deweibel@gmail.com
jasonshort
james.goppert
tridge60@gmail.com
DrZiplok@gmail.com
DrZiplok
paulbmather@gmail.com