Andrew Tridgell
db357c932c
APM: preparing for 2.67 release
2012-11-21 22:28:30 +11:00
Andrew Tridgell
937c485f91
APM: make it possible to run the CLI on any serial port
2012-11-21 21:41:34 +11:00
rmackay9
0907650456
ArduPlane: fix HIL build
2012-11-07 21:23:07 +09:00
rmackay9
9e3ae301b1
ArduPlane: move to use new INS library instead of IMU library
2012-11-07 19:21:03 +09:00
Andrew Tridgell
efc2324666
APM: added RSSI_PIN option for receiver RSSI
...
this allows you to configure the pin for receiver RSSI without
recompiling
2012-11-06 22:04:41 +11:00
Andrew Tridgell
67ba1a6068
APM: prepare for 2.66
2012-10-31 13:25:19 +11:00
Pat Hickey
0dd0bd131a
Update ArduCopter and ArduPlane dependencies on AP_Menu
2012-10-18 20:53:39 -07:00
rmackay9
49eb36e0cb
ArduPlane: added AP_Semaphore.h to list of includes
2012-10-06 13:14:28 +09:00
rmackay9
4bca609b9f
AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory
...
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
2012-09-28 19:21:59 +09:00
Andrew Tridgell
f599962b90
APM: prepare for 2.65
2012-09-24 07:14:30 +10:00
Andrew Tridgell
bf9e2149df
APM: prepare for 2.64 release
2012-09-23 19:32:56 +10:00
Andrew Tridgell
7d84666b9d
APM: removed the unused sonar code
...
when we start supporting a sonar we'll add a AP_Sonar library, like
AP_Airspeed
2012-09-19 19:35:22 +10:00
Andrew Tridgell
1cdb3a8dba
APM: added ALT_OFFSET parameter
...
useful to adjust for barometric pressure changes during a long flight
2012-09-19 16:23:25 +10:00
Andrew Tridgell
a00e00519f
APM: save another few bytes
2012-09-18 13:58:50 +10:00
Andrew Tridgell
bd2eae8a18
APM: fixed a comment
2012-09-18 13:58:49 +10:00
Andrew Tridgell
f32fcb7495
APM: save 100 bytes of memory
...
remove flight_mode_strings array
2012-09-18 13:58:49 +10:00
Andrew Tridgell
8f91728d65
APM: preparing for 2.63 release
2012-09-17 17:32:13 +10:00
Andrew Tridgell
73340a5e5d
APM: fixed handling of DO_REPEAT_SERVO and DO_REPEAT_RELAY
2012-09-17 14:45:47 +10:00
Andrew Tridgell
0d780baa00
APM: prepare for 2.62 release
2012-09-13 12:02:18 +10:00
Andrew Tridgell
972b8df052
APM: allow for landing pitch control until final stage
2012-09-12 13:09:16 +10:00
Andrew Tridgell
7a49515ee3
APM: fixed roll in landing approach
2012-09-12 11:53:17 +10:00
Andrew Tridgell
77926a6965
APM: switch to Randys new IMU rate control method
...
this drives the speed of the 50Hz loop by the number of samples
accumulated in the IMU. This should give much more consistent timing
in DCM.
Thanks to Randy for introducing this scheme in ArduCopter!
2012-09-11 16:39:36 +10:00
Andrew Tridgell
0a9070e4fe
APM: removed the GPS_enabled flag
...
this fixes using GPS_PROTOCOL to specify a specific GPS with a GPS
that takes a few updates before it works (eg. needing baud rate
changes).
This makes it easier to use an APM1-1280 with more features enabled
2012-09-11 13:37:34 +10:00
Andrew Tridgell
d08bd4214b
APM: added support for MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN
...
this allows for remote reboot of APM
2012-09-10 11:42:30 +10:00
Andrew Tridgell
966c1988c3
APM: preparing for 2.61 release
2012-09-08 18:36:17 +10:00
Andrew Tridgell
4219cb55ce
APM: use ahrs.airspeed_estimate() in two more places
...
this applies the wind constraint
2012-09-08 11:37:11 +10:00
Andrew Tridgell
b2a74951d1
APM: added RUDDER_STEER option
...
when enabled, this uses only the rudder to steer during takeoff and
landing, using aileron only for levelling
2012-09-08 10:07:03 +10:00
Andrew Tridgell
a71cee4579
APM: accumulate mag readings during spare cycles in ArduPlane
...
With this change we average over 100 mag readings per compass.read()
call, which means we are reading the compass at over 1kHz instead of
10Hz. The noise reduction is huge.
2012-09-08 10:05:58 +10:00
Andrew Tridgell
0be8349678
APM: obey pitch limits in FBWA as well
...
this means pitch limits are constrained by LIM_PITCH_MIN and
LIM_PITCH_MAX
2012-08-30 20:15:42 +10:00
Andrew Tridgell
7ab7770c3d
APM: added the ability to forcibly crash the plane on OBC failsafe breach
...
this allows a user to setup the OBC failsafe system to forcibly crash
the plane (surfaces at limits, zero throttle) when the failsafe system
triggers. This is to allow APM to be used in the Outback Challenge. In
the OBC an external failsafe board also does this using the heartbeat
control pin, so this is an extra safety mechanism.
To prevent users accidentially triggering a crash, this code only
activates if FS_TERM_ACTION is set to to the magic value 42.
2012-08-28 20:18:24 +10:00
Andrew Tridgell
3f54b83238
APM: added ALT_CTRL_ALG parameter
...
this allows you to select different altitude control algorithms. The
current choices are for the default (automatic based on if airspeed is
available), or to force a non-airspeed algorithm
The idea is to make it possible to use airspeed for some things (like
wind speed, speed scaling) but not for alt control
2012-08-28 20:18:24 +10:00
Andrew Tridgell
ac2ad44c3c
APM: cleanup throttle suppression code and don't use airspeed to unsupress
...
this removes the throttle suppression when any of the conditions are
met once, as otherwise flying slow below 10m could zero the throttle.
It also removes the use of airspeed for disabling throttle
supression. Otherwise a strong gust of wind can cause ArduPlane to
try to takeoff!
2012-08-28 20:18:23 +10:00
Andrew Tridgell
517e6b2b9d
APM: prepare for ArduPlane 2.60
2012-08-22 16:28:38 +10:00
Andrew Tridgell
d091311196
APM: removed factor of 0.5 in non-airspeed takeoff pitch
...
this limited the pitch far below the specified target pitch
2012-08-22 16:28:38 +10:00
Andrew Tridgell
56ada1a69c
APM: added RSSI to RC_CHANNELS_RAW as well
...
and prevent double read
2012-08-22 13:58:25 +10:00
Andrew Tridgell
e74dab122a
APM: added RECEIVER_RSSI_PIN option
...
this allows for the receiver RSSI to be sent over MAVLink
Thanks to Burt Green for the suggestion
2012-08-22 13:33:12 +10:00
Andrew Tridgell
2bc2460c07
APM: optional build with new controller libs
2012-08-22 12:39:07 +10:00
uncrustify
5e913c72c4
uncrustify ArduPlane/ArduPlane.pde
2012-08-21 19:19:51 -07:00
Andrew Tridgell
5d29d5e5a1
APM: removed DMP support from ArduPlane
...
Without centripetal correction the DMP code will almost certainly
crash a plane
2012-08-22 11:46:35 +10:00
Andrew Tridgell
bd6581c523
AHRS: removed Quaternion build support from APM/ACM/rover
2012-08-22 10:42:21 +10:00
rmackay9
e5d8efdb7e
ArduPlane: replaced many "int" with "int16_t", "long" with "int32_t"
2012-08-18 18:26:13 +09:00
Andrew Tridgell
2fb8a13ac6
APM: added parameter FBWB_ELEV_REV
...
this fixes issue 343
2012-08-17 15:04:53 +10:00
Andrew Tridgell
20be77ab32
APM: when land_complete is true, use land_pitch
...
this gives a flare on final landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell
f4023d1b44
AP_Airspeed: remove airspeed filter and run at 10Hz
...
this saves on the filter memory, and gives just as good a result
2012-08-15 12:39:35 +10:00
Andrew Tridgell
8c3b6f471f
APM: keep the time of the last heartbeat message
...
this will be used for failsafe processing
2012-08-15 12:39:34 +10:00
Andrew Tridgell
93f45f232f
APM: added 'OBC' failsafe module for ArduPlane
...
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.
This includes:
- manual pin
- heartbeat pin
- waypoint for heartbeat failure
- waypoint for GPS failure
2012-08-15 12:39:34 +10:00
Andrew Tridgell
98d5a49717
APM: fixed LOITER_TIME and LOITER_TURNS
...
These now follow the mavlink spec. Loiter time is in seconds, and
loiter turns is now 32 bit angle, so can handle larger numbers of
turns.
2012-08-15 12:39:34 +10:00
Andrew Tridgell
9d9c7b0455
APM: allow for navigation by dead-reckoning
...
we now ask AHRS if we have a position estimate, and use that if
available
2012-08-11 12:01:08 +10:00
Amilcar Lucas
9a8fd4738e
Add an optional second mount to ArduPlane and ArduCopter
2012-08-08 23:22:24 +02:00
Andrew Tridgell
5e19c0cf04
AP_Airspeed: removed values passed to constructor
2012-08-08 16:38:39 +10:00