Commit Graph

930 Commits

Author SHA1 Message Date
Michael du Breuil
e8401671e3 Sub: Allow scripting to run 2019-03-05 08:45:54 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
3fd5e05601 Sub: replace location_offset() and get_distance() function calls with Location object member function calls
This allows removing duplicated code
2019-02-28 11:44:09 +11:00
Peter Barker
97792d1774 Sub: AHRS set_orientation renamed to update_orientation 2019-02-26 10:28:09 +11:00
Peter Barker
285fe4c79c Sub: explicitly type constant
This makes clang happier
2019-02-20 19:23:54 +11:00
Peter Barker
1ce80e1f17 Sub: remove stale STREAM_RAW_CONTROLLER_msgs variable 2019-02-20 19:23:54 +11:00
Peter Barker
e75dccfc71 Sub: Rally no longer takes ahrs in constructor 2019-02-20 18:03:38 +11:00
Peter Barker
57e8528a96 Sub: move update_sensor_flags to GCS_Sub.cpp 2019-02-20 11:57:00 +11:00
Peter Barker
cb95bf7814 Sub: move update_sensor_status_flags into GCS subclasses 2019-02-19 14:09:59 +11:00
Peter Barker
bb706305d0 Sub: move sensor flags to be a GCS thing rather than a GCS_MAVLINK thing 2019-02-19 14:09:59 +11:00
Peter Barker
7b80f56a80 Sub: GCS_MAVLink takes care of mavlink capabilities 2019-02-19 13:14:52 +11:00
Peter Barker
57e5991fde Sub: move try_send_message of nav_controller_output up 2019-02-19 10:08:00 +11:00
Peter Barker
db362eaa13 Sub: remove redundant home-setting sanity checks 2019-02-15 08:28:45 +11:00
Peter Barker
8937ef3190 Sub: make setting of home boolean in preparation for sanity checks 2019-02-15 08:28:45 +11:00
Peter Barker
dc0ad11f7a Sub: use altitude frame mapping function
Remove checking for coordinate frames

This is very much NFC.  This change uncovers previous dead code in the
case that we are not ignoring yaw.
2019-02-13 10:06:49 +11:00
Peter Barker
44b7763caf Sub: move handling of command-int MAV_CMD_DO_SET_HOME up 2019-02-13 09:42:26 +11:00
Peter Barker
0c8f0377ca Sub: move handling of fence point handling up 2019-02-08 11:47:59 +09:00
Peter Barker
5002fa2081 Sub: move handling of MAV_CMD_DO_SET_FENCE_ENABLED up 2019-02-08 11:47:59 +09:00
Peter Barker
17e4981785 Sub: move handling of RC_CHANNELS_OVERRIDE up 2019-02-05 13:59:21 +11:00
Peter Barker
fc19ce03b6 Sub: move sending of sys_status message up 2019-02-05 11:07:39 +11:00
Peter Barker
1690f78f4c Sub: move handling Write_Event into AP_Logger 2019-02-04 09:30:07 +09:00
Peter Barker
3521d98b52 Copter: move handling Write_Event into AP_Logger 2019-02-04 09:30:07 +09:00
Randy Mackay
aa7743e991 Sub: integrate AC_WPNav::get_speed rename to get_default_speed 2019-01-31 19:34:32 +09:00
Peter Barker
66624c46a6 Sub: AC_Fence is included for all vehicles 2019-01-31 13:44:29 +09:00
Peter Barker
05c9ded9fc Sub: move sending of fence_status message up 2019-01-31 13:44:29 +09:00
Peter Barker
79eb0ac75f Sub: fence no longer takes reference to ahrs in constructor 2019-01-31 11:25:38 +09:00
Peter Barker
6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00
Peter Barker
b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Francisco Ferreira
8850ab73a6
Sub: add KDECAN to included libraries 2019-01-18 00:57:33 +00:00
Peter Barker
9783bf730f Sub: log_terrain_data no longer takes a DataFlash argument 2019-01-18 11:17:40 +11:00
Peter Barker
696c8e3fb9 Sub: Log_Write_SIMSTATE no longer takes dataflash pointer 2019-01-18 11:16:54 +11:00
Peter Barker
9e8d2d7f7d Sub: remove PX4 FWVersion info 2019-01-16 11:47:55 +11:00
Peter Barker
d8e90ded90 Sub: adjust for Location_Class and Location unification 2019-01-16 11:45:29 +11:00
Peter Barker
b4c65dde92 Sub: adjust for Location_Class and Location unification 2019-01-16 11:45:29 +11:00
Peter Barker
d92f34c3d0 Sub: adjust for location flags being moved out of union 2019-01-16 11:45:29 +11:00
Randy Mackay
8ba87171e6 Sub: desired-ground-idle replaces spin-when-armed 2019-01-15 11:41:44 +09:00
Pierre Kancir
2c895599e1 Sub: correct rc_checks_copter_sub call 2019-01-11 08:38:53 +09:00
Peter Barker
23ab90c596 Sub: Terrain uses rally singleton 2019-01-09 10:14:16 +11:00
Randy Mackay
8830e8d4e5 Sub: remove unused error code 2019-01-08 19:42:32 +09:00
Michael du Breuil
b4c5041aad Sub: Remove unneeded GCS rally override 2019-01-08 10:39:50 +11:00
Michael du Breuil
58895b5a82 Sub: Reset all storage when format version is incorrect 2019-01-08 10:35:37 +11:00
murata
90f2f38fb2 Sub: Delete NuttX version processing 2019-01-08 10:06:20 +11:00
Andrew Tridgell
088442880e build: removed makefile build system 2018-12-22 11:06:59 +11:00
Andrew Tridgell
25c659822a Sub: changed Log_Write_Rate to use AHRS_View 2018-12-21 22:17:52 +11:00
Peter Barker
8a44bf50a8 Sub: split SIMSTATE, AHRS2 and AHRS3 onto their own ap_message ids 2018-12-19 13:19:23 +11:00
Peter Barker
0e1957328e Sub: split DISTANCE_SENSOR onto its own ap_message id 2018-12-19 07:24:37 +11:00
Peter Barker
87d27957d9 Sub: try_send_message caller checks telemetry_delayed 2018-12-18 14:25:56 +11:00
Peter Barker
d1daacd699 Sub: split SYS_STATUS and POWER_STATUS onto separate ap_messages 2018-12-18 14:05:20 +11:00
Francisco Ferreira
6f01073786 Sub: fix error in task scheduled rate 2018-12-14 09:17:02 +09:00
Peter Barker
bbf1c434c6 Sub: DataFlash uses AP_Mission singleton 2018-12-13 14:45:30 +09:00
Peter Barker
aab9103356 Sub: GCS_MAVLink now uses Mission singleton 2018-12-13 10:52:52 +09:00
Peter Barker
e498883624 Sub: split MSG_SCALED_PRESSURE into three separate messages 2018-12-12 21:36:01 +11:00
Peter Barker
85f579021e Sub: GCS_MAVLink uses dataflash singleton 2018-12-11 08:43:47 +09:00
Peter Barker
2e58eb1d46 Sub: call GCS update_send at main loop rate 2018-12-10 12:52:41 +09:00
Peter Barker
5e196525bf Sub: split MSG_RAW_IMU1 into per-IMU ap_messages 2018-12-10 12:52:41 +09:00
Peter Barker
4d21630bf0 Sub: send both SYS_STATUS or POWER_STATUS or neither 2018-12-10 12:52:41 +09:00
Peter Barker
e2e17b8822 Sub: rename send_extended_status1 to send_sys_status 2018-12-10 12:52:41 +09:00
Peter Barker
b31ce6ae69 Sub: adjust for new update entry points into GCS 2018-12-10 12:52:41 +09:00
Peter Barker
fe6342107b Sub: add parameter stream to list-of-all-streams 2018-12-10 12:52:41 +09:00
Peter Barker
85a96195fd Sub: rename MSG_EXTENDED_STATUS2 to MSG_MEMINFO 2018-12-04 18:01:38 +11:00
Peter Barker
a40937337d Sub: rename MSG_RAW_IMU2 and MSG_RAW_IMU3 to reflect what they send 2018-12-04 17:45:32 +11:00
Peter Barker
27405f9dd7 Sub: remove pointless wrappers around gcs functions 2018-11-23 10:56:17 +11:00
Peter Barker
376a422cff Sub: OpticalFlow takes care of its own logging 2018-11-13 10:40:23 +11:00
Peter Barker
2bca18b712 Sub: do not pass ahrs to opticalflow constructor 2018-11-13 10:40:23 +11:00
Peter Barker
102f06bb92 Sub: move sending of optical flow status up to base class 2018-11-13 10:40:23 +11:00
Peter Barker
2116737e35 Sub: don't pass ahrs to terrain constructor 2018-11-08 20:59:45 +11:00
Peter Barker
cadeb428b6 Sub: stop passing ahrs to Mission constructor 2018-11-08 10:01:16 +09:00
murata
9bf4428c28 Sub: Add patch number to VERSION notation 2018-11-08 09:11:07 +09:00
Michael du Breuil
4540109513 Sub: Fix battery failsafe parameter conversion 2018-11-06 10:18:39 +09:00
Michael du Breuil
68d713b971 Sub: Make capability init consistent 2018-11-05 14:04:36 +11:00
Peter Barker
793ff201b4 Sub: remove dead do_erase_logs method 2018-11-02 20:44:31 +09:00
Peter Barker
a487cb09ed Sub: move handling of gimbal messages up
Sub: move handling of mav_cmd_do_mount_control up

Sub: move handling of deprecated mount messages up

Sub: move handling of command_do_set_roi up

Sub: move handling of command_do_set_roi up

Sub: mount no longer takes ahrs in constructor
2018-10-30 17:19:14 +11:00
Peter Barker
d690baecf9 Sub: let AP_Mission handle common camera commands 2018-10-30 15:37:18 +11:00
Peter Barker
5a8a3963d4 Sub: move servorelayevents mission handling into AP_Mission 2018-10-30 15:37:18 +11:00
Peter Barker
e79d107761 Sub: mission library handles gripper 2018-10-30 15:37:18 +11:00
Peter Barker
7289f0d04c Sub: AC_Avoid is built on all vehicles 2018-10-30 12:10:42 +11:00
Andrew Tridgell
a8f5079df9 Sub: enable in-flight compass learning 2018-10-24 07:25:42 +10:00
Peter Barker
ecd69e4359 Sub: remove pointless zero-initialisation 2018-10-23 16:12:45 +11:00
Peter Barker
da5ed06714 Sub: leave AHRS to log and notify home changes 2018-10-16 10:55:13 +11:00
Peter Barker
47b5cf98ea Sub: make libraries get EKF control limits themselves 2018-10-09 10:47:38 +11:00
Michael du Breuil
27fad4489e Sub: Cope with AC_PosControl renaming 2018-09-20 15:15:45 -07:00
Leonard Hall
ccb30d44ac Sub: Missing Loiter Init on accel 2018-09-19 17:29:55 +09:00
Michael du Breuil
18512eebbb Sub: Allow starting mission commands to fail 2018-09-11 06:42:00 +10:00
Peter Barker
c0a990fda7 Sub: correct failsafe recovery test 2018-09-07 18:11:11 +09:00
Peter Barker
753be1142f Sub: use camera singleton to get camera rather than callback 2018-08-31 15:48:56 +10:00
Peter Barker
e4c0ef789b Sub: GCS_MAVLink uses compass singleton, stop implementing get_compass 2018-08-31 15:48:56 +10:00
Peter Barker
ff9a7b3f44 Sub: failsafe: subtract times, don't add them
Avoids integer wrap issues
2018-08-25 16:14:01 +09:00
Randy Mackay
012dd57246 Sub: rename gcs_check_input to gcs_update 2018-08-24 15:30:50 +09:00
Michael du Breuil
7fd8211253 Sub: Remove unneeded ServoRelayEvent mask set 2018-08-20 21:31:06 -07:00
Randy Mackay
54df7ad88d Sub: remove compass accumulate 2018-08-06 11:05:34 +10:00
Andrew Tridgell
660da5aaea Sub: fixed RC_Channels parameter docs 2018-08-04 12:28:38 +10:00
Peter Barker
1ba0901e51 Sub: minimal support for inheritting from RC_Channel 2018-08-01 12:11:30 +09:00
Michael du Breuil
ad185edd48 Sub: Update notify initilization 2018-08-01 09:22:09 +10:00
Peter Barker
2d1ed75592 Sub: handle command_long in GCS base class 2018-07-06 09:43:09 +10:00
Peter Barker
332fcb3226 Sub: handle command_int in base class 2018-07-06 09:43:09 +10:00
Peter Barker
d183847aa3 Sub: use compass singleton for logging 2018-07-04 20:11:27 +01:00
Peter Barker
3cfdcb1f2c ArduSub: use ArmingMethod enumeration 2018-07-03 15:16:38 +10:00
Peter Barker
cc46ab3092 Sub: use singletons in AP_Arming 2018-07-03 13:44:11 +10:00
Peter Barker
e0eb3424ec Sub: move mavlink reboot code up to base class 2018-07-03 12:12:25 +10:00
Jacob Walser
f4da0215d1 Sub: add motor test implementation 2018-07-02 11:31:58 -04:00
Patrick José Pereira
dcd3f83539 Sub: Remove void as parameter
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-07-02 11:25:03 -04:00
Patrick José Pereira
90601c80e9 Sub: Simplify some returns
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-29 15:51:30 -04:00
Patrick José Pereira
e229d46612 Sub: Update functions argument names to match with cpp
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-29 15:51:30 -04:00
Peter Barker
fd055bfa58 Sub: use check_failed function 2018-06-23 15:33:19 +10:00
Patrick José Pereira
d14b37e89c Sub: Change from labs to abs for floats
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-21 17:24:14 +01:00
Patrick José Pereira
cbef5db174 Sub: Simplify return logic
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-21 17:24:14 +01:00
Andrew Tridgell
5eab425065 Sub: added ESC_TELEMETRY to mavlink streams 2018-06-21 10:48:02 +10:00
Peter Barker
c17514cf85 Sub: use AP_FWVersion singleton 2018-06-18 19:10:37 +01:00
Peter Barker
4cc236b8a7 Sub: use AP_RTC
Sub: AP_GPS now sets the system time directly

Sub: use AP_RTC for delays in missions
2018-06-15 08:01:22 +10:00
Patrick José Pereira
d3da8f2914 Sub: Add attitude control with althold via mavlink
Allow ordinary attitude positions without a gps system

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-12 17:27:56 -04:00
Patrick José Pereira
3701fc0937 Sub: Move from micros() to AP_HAL::micros()
AP_HAL::micros() is a more common style around the rest of the project

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-12 17:27:56 -04:00
Patrick José Pereira
4de371743e Sub: Move from millis() to AP_HAL::millis()
AP_HAL::millis() is a more common style around the rest of the project

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-12 17:27:56 -04:00
Patrick José Pereira
a856f747aa Sub: Organize descend climb_rate calc
Make it more clear to read

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-12 17:27:56 -04:00
Peter Barker
32b8b86019 Sub: move handling of MAV_CMD_DO_GRIPPER up 2018-06-11 19:07:39 +01:00
Patrick José Pereira
5a8d04e8f5 Sub: Simplify some returns logic
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-08 11:25:51 -04:00
Michael du Breuil
c642d1ed74 Sub: Rework to support override changes 2018-06-05 09:51:09 +10:00
Peter Barker
1dbfb9943c Sub: make VFR_HUD always return height above MSL 2018-06-05 09:38:20 +10:00
Michael du Breuil
5a0a8a6705 Sub: Remove software type param 2018-06-05 09:14:12 +10:00
Peter Barker
31c6d7aaa0 Sub: Location gets ahrs from singleton 2018-06-01 16:18:33 +01:00
Peter Barker
3694f085dc Sub: move try_send_message handling of EKF_STATUS_REPORT up 2018-06-01 16:12:45 +01:00
Peter Barker
48a4523a73 Sub: fix comments in config.h 2018-06-01 13:28:43 +09:00
Peter Barker
69d8980608 Sub: split home-set and home-locked state 2018-05-29 14:38:45 +10:00
Peter Barker
1f31bd21c4 Sub: create persist_streamrates() callback to indicate persistence 2018-05-29 13:08:29 +10:00
Peter Barker
18c494b25f Sub: move sending of vfr_hud up 2018-05-29 13:00:40 +10:00
Peter Barker
420b9869f7 Sub: move sending of simstate up 2018-05-23 18:36:50 +10:00
Peter Barker
148756bc1c Sub: add type-correctness for stream messages 2018-05-22 11:21:25 +10:00
Peter Barker
f0dd90b81a Sub: eliminate MSG_LIMITS_STATUS 2018-05-22 09:05:14 +09:00
Peter Barker
cc899d74e2 Sub: move try_send_message of servo-output-raw up 2018-05-21 19:08:08 +01:00
Peter Barker
324be6ca0d Sub: move sending of GLOBAL_POSITION_INT up to GCS_MAVLINK 2018-05-17 15:48:06 +01:00
Peter Barker
a81b4266fe Sub: remove arguments to send_home and send_ekf_origin 2018-05-17 20:42:36 +10:00
Peter Barker
3e7cb08804 Sub: move send_attitude up to GCS_MAVLINK 2018-05-17 18:28:43 +10:00
Peter Barker
c91ba19e7f Sub: override sending of scaled_pressure3
Without this change we run the risk of sending out the same message with
vastly different data in it
2018-05-17 15:37:14 +10:00
Peter Barker
12f62a44ce Sub: move try_send_message sending of sensor offsets up 2018-05-17 15:37:14 +10:00
Peter Barker
5736aa6ef3 Sub: move try_send_message of RAW_IMU up to GCS_MAVLINK 2018-05-17 15:37:14 +10:00
Peter Barker
631e967df3 Sub: handle setting of ekf origin in GCS_MAVLink 2018-05-17 10:13:42 +10:00
Peter Barker
9a73f0c260 Sub: move Log_Write_Home_And_Origin into AP_AHRS 2018-05-17 10:13:42 +10:00
Michael du Breuil
2d7f60ab59 Sub: Use named float wrappers 2018-05-17 00:59:45 +01:00
Michael du Breuil
936c7faa3e Sub: AP_Proximity is now a common library 2018-05-16 23:21:41 +01:00
Michael du Breuil
216457a281 Sub: Move MAVLink rangefinder up to parent 2018-05-16 23:21:41 +01:00
Michael du Breuil
5393337dfa Sub: Send all distance sensors 2018-05-16 23:21:41 +01:00
Michael du Breuil
3927fb3107 Sub: Remove the usage of RC_Channels::set_overrides() 2018-05-11 12:13:39 +01:00
Peter Barker
0a0e11ba21 Sub: correct compilation when features disabled
Gripper
Mount
2018-05-10 17:55:13 +09:00
Peter Barker
524d63522a Sub: move sending of battery data up 2018-05-09 11:40:31 -07:00
Peter Barker
5674a68457 Sub: move data stream send up 2018-05-09 16:15:38 +10:00
Peter Barker
133b9930a6 Sub: make scheduler track whether it has called the delay callback 2018-05-09 16:15:38 +10:00
Jacob Walser
cd98bef1f7 Sub: Update release notes for Sub-3.5.3 2018-05-08 14:41:36 -04:00
Peter Barker
b7cd5491e2 Sub: move try_send_message handling of RC_CHANNELS up 2018-05-08 12:33:32 +01:00
Patrick José Pereira
e62b560095 Sub: Move SITL barometer check to control_check_barometer
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-05-07 17:28:51 -04:00
Peter Barker
f075d6bd93 Sub: move try_send_message of heartbeats up to GCS_MAVLINK 2018-05-07 11:30:13 -06:00
Peter Barker
5bad067a8d Sub: move try_send_message handling of VIBRATION up 2018-05-07 11:23:28 -06:00
Jacob Walser
aadbd04726 Sub: Update release notes for 3.5.3-beta 2018-04-29 17:21:26 -04:00