Commit Graph

3274 Commits

Author SHA1 Message Date
Nathan E
4d7fc66657 Update parameters.cpp per magicrub comments 2019-01-23 09:24:18 -07:00
Nathan E
448d19ddbb Update ArduPlane/Parameters.cpp 2019-01-23 09:24:18 -07:00
Mark Whitehorn
5c81a78c9c Plane: tailsitter forward transition bugfix 2019-01-22 12:55:47 +11:00
Peter Barker
40856fef56 Plane: remove vestiges of old PX4_MIXER code 2019-01-19 19:31:03 +11:00
Peter Barker
6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00
Peter Barker
b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Peter Barker
99a93112b4 Plane: remove PX4-specific code that disables overrides on reboot 2019-01-18 17:32:02 +11:00
Andrew Tridgell
bc438676ab Plane: fix tailsitter logged attitude targets 2019-01-18 14:16:55 +11:00
Peter Barker
129762d3af Plane: APM_Control uses DataFlash singleton, stop passing it 2019-01-18 14:14:22 +11:00
Francisco Ferreira
d0fa931b09
Plane: add KDECAN to included libraries 2019-01-18 00:57:32 +00:00
Peter Barker
76b31f315a Plane: log_terrain_data no longer takes a DataFlash argument 2019-01-18 11:17:40 +11:00
Peter Barker
a35fbb4a11 Plane: Log_Write_SIMSTATE no longer takes dataflash pointer 2019-01-18 11:16:54 +11:00
Peter Barker
cb92fba701 Plane: remove PX4 FWVersion info 2019-01-16 11:47:55 +11:00
Peter Barker
b258e89a2d Plane: adjust for Location_Class and Location unification 2019-01-16 11:45:29 +11:00
Peter Barker
acafb0f3c1 Plane: adjust for location flags being moved out of union 2019-01-16 11:45:29 +11:00
Randy Mackay
2650b1fe93 Plane: desired-ground-idle replaces spin-when-armed 2019-01-15 11:41:44 +09:00
Michael du Breuil
843c92ced5 Plane: Remove some redundant code/state resets 2019-01-15 10:45:50 +11:00
IamPete1
9c0ac5899f Plane: pass rudder diffential thrust to AP_motors 2019-01-15 10:19:19 +11:00
IamPete1
eaed0a2d47 Plane: make rudder differnal thrust global 2019-01-15 10:19:19 +11:00
Andrew Tridgell
f35cebcca4 Plane: fixed EKF yaw reset
we need to do the yaw reset before updating the rest of quadplane, or
it is not effective

thanks to Leonard for noticing the bug!
2019-01-14 08:32:17 +11:00
Andrew Tridgell
53a1d98b68 Plane: fixed VTOL takeoff to ignore lat/lon in mission
we should always takeoff vertically
2019-01-11 13:48:45 +11:00
Peter Barker
5c90a2dab2 Plane: Terrain uses rally singleton 2019-01-09 10:14:16 +11:00
Michael du Breuil
d6cac4b52a Plane: Add a failure timer for quadplane forward transitions
Falls over to QLAND if we fail to transition
2019-01-08 10:52:12 +11:00
Michael du Breuil
64e152fbc0 Plane: Remove unneeded GCS rally override 2019-01-08 10:39:50 +11:00
Michael du Breuil
ae6dc01cd5 Plane: Reset all storage when format version is incorrect 2019-01-08 10:35:37 +11:00
murata
02d692f32e Plane: Delete NuttX version processing 2019-01-08 10:06:20 +11:00
Andrew Tridgell
97e54f6359 Plane: allow mavlink when in sensor error 2019-01-04 19:17:31 +11:00
Michael du Breuil
09f6ec8a00 Plane: Remove unneeded AP_Buffer include 2018-12-31 11:41:43 +09:00
Michael du Breuil
e6bc44f471 Plane: Fix cases where quadplane level transition was not applied 2018-12-31 10:36:32 +11:00
Michael du Breuil
69c87c6c4a Plane: Disallow arming if quadplane has been requested but isn't available 2018-12-28 18:09:21 +11:00
IamPete1
9c2db806f3 Plane: add units to Q_VFWD_ALT 2018-12-28 16:15:41 +11:00
Andrew Tridgell
7939f3488b Plane: log PIDs during QAUTOTUNE twitch 2018-12-22 15:10:23 +11:00
Andrew Tridgell
088442880e build: removed makefile build system 2018-12-22 11:06:59 +11:00
Andrew Tridgell
9117dcc54b Plane: don't log QTUN when VTOL not active 2018-12-21 22:17:52 +11:00
Andrew Tridgell
d3afc9424a Plane: make QTUN logging match copter logging 2018-12-21 22:17:52 +11:00
Andrew Tridgell
1013eddfce Plane: use AHRS_View for RATE logging 2018-12-21 22:17:52 +11:00
IamPete1
1a98989ac6 Tailsitter: move mixer to AP_motors 2018-12-21 11:19:18 +09:00
Michael du Breuil
a78bce32c0 Plane: Allow users to force target airspeed in cruise or fbwb 2018-12-18 22:36:55 -08:00
Peter Barker
d133f998c5 Plane: split SIMSTATE, AHRS2 and AHRS3 onto their own ap_message ids 2018-12-19 13:19:23 +11:00
Peter Barker
54022b6b57 Plane: split DISTANCE_SENSOR onto its own ap_message id 2018-12-19 07:24:37 +11:00
Randy Mackay
a96c1566ec Plane: fix quadplane pos control param docs 2018-12-18 12:01:07 +00:00
Peter Barker
17f244ce9f Plane: try_send_message caller checks telemetry_delayed 2018-12-18 14:25:56 +11:00
Peter Barker
5137c0ab5f Plane: split SYS_STATUS and POWER_STATUS onto separate ap_messages 2018-12-18 14:05:20 +11:00
Michael du Breuil
47dfafd670 Plane: Ensure that the plane is an appropriate distance out before starting the approach 2018-12-18 10:11:22 +11:00
Michael du Breuil
05484c3987 Plane: Support a different landing airspeed for fw quadplane landings 2018-12-18 10:11:22 +11:00
Michael du Breuil
1a45755ffd Plane: Support a different landing radius for quadplane fw approach 2018-12-18 10:11:22 +11:00
Michael du Breuil
f1154a6e7c Plane: Pass the mission command around rather then fetching it 2018-12-18 10:11:22 +11:00
Michael du Breuil
42e67d5849 Plane: Whitespace fixes 2018-12-18 10:11:22 +11:00
Michael du Breuil
e8885ee1a5 Plane: Fly a planned abort sequence if available 2018-12-15 09:03:25 +11:00
Nikhil Upadhye
d1e93bae83 Plane: adding new mode QAUTOTUNE
copter like autotune support for quadplanes and tailsitter in VTOL mode.

cleanup
2018-12-14 16:33:11 +11:00
Peter Barker
9d323b4b90 Plane: move accept_packet to GCS_MAVLink base class 2018-12-14 12:44:31 +11:00
Peter Barker
56675851b6 Plane: DataFlash uses AP_Mission singleton 2018-12-13 14:45:30 +09:00
Peter Barker
2978da5ecd Plane: GCS_MAVLink now uses Mission singleton 2018-12-13 10:52:52 +09:00
Peter Barker
bcf68a9103 Plane: split MSG_SCALED_PRESSURE into three separate messages 2018-12-12 21:36:01 +11:00
Peter Barker
a263364959 Plane: GCS_MAVLink uses dataflash singleton 2018-12-11 08:43:47 +09:00
Michael du Breuil
f3a843ebf7 Plane: Fix a comma in bitmask that was breaking emitters 2018-12-11 10:24:40 +11:00
Peter Barker
153228bef5 Plane: call GCS update functions at quadcopter main loop rate 2018-12-10 12:52:41 +09:00
Peter Barker
18d4df8d4f Plane: split MSG_RAW_IMU1 into per-IMU ap_messages 2018-12-10 12:52:41 +09:00
Peter Barker
67042d39d1 Plane: send both SYS_STATUS or POWER_STATUS or neither 2018-12-10 12:52:41 +09:00
Peter Barker
d1727d26a1 Plane: rename send_extended_status1 to send_sys_status 2018-12-10 12:52:41 +09:00
Peter Barker
7f5c0db949 Plane: adjust for new update entry points into GCS 2018-12-10 12:52:41 +09:00
Peter Barker
1ca67df663 Plane: add parameter stream to list-of-all-streams 2018-12-10 12:52:41 +09:00
Andrew Tridgell
fa04c2d094 Plane: prevent jitter on surfaces due to speed scaling
when disarmed the k_throttle output can oscillate due to stage in the
loop we are at, even though actual output is zero. This can cause
jitter in the speed scaling, which causes surface movement

To fix, don't use k_throttle value when disarmed
2018-12-06 17:44:11 +11:00
Randy Mackay
71708ee4ea Plane: quadplane uses set_defaults_from_table 2018-12-06 12:23:41 +09:00
Peter Barker
edd4f6d14d Plane: rename MSG_EXTENDED_STATUS2 to MSG_MEMINFO 2018-12-04 18:01:38 +11:00
Peter Barker
de479032ba Plane: rename MSG_RAW_IMU2 and MSG_RAW_IMU3 to reflect what they send 2018-12-04 17:45:32 +11:00
Andrew Tridgell
6c7af3830b Plane: apply throttle slew to dual-motor setups
thanks to Alex for noticing this issue
2018-12-04 09:08:31 +11:00
IamPete1
c6e70c0454 Plane: add roll limit for tailsitters
Quadplane: add tailsitter pitch params
2018-12-01 09:40:07 +11:00
Andrew Tridgell
b6519c88a5 Plane: fixed a bug in Q_ASSIST_ modes for tiltrotors
when a tilt-rotor drops below Q_ASSIST_SPEED we need to keep it in the
airspeed wait state until it has regained airspeed, otherwise we will
end up with too low throttle
2018-11-30 18:17:42 +11:00
Leonard Hall
0943ace7a9 Plane: Zero Yaw correction during transition
and relax attitude controller when not using lift motors.
2018-11-30 18:16:29 +11:00
Andrew Tridgell
c081ce9adb Plane: don't relax attitude controllers for tailsitters
this fixes an issue with testing control movement when disarmed
2018-11-30 13:01:53 +11:00
Peter Barker
ba3a369651 Plane: remove update_events scheduler shim 2018-11-27 10:07:13 +11:00
Michael du Breuil
1e220d3d37 Plane: Add support for mode change to QLand as a failsafe 2018-11-24 14:37:04 -08:00
Peter Barker
d4e88bc6ba Plane: remove pointless wrappers around RC_Channels functions 2018-11-23 10:56:17 +11:00
Peter Barker
03b71e1123 Plane: remove pointless wrappers around gcs functions 2018-11-23 10:56:17 +11:00
Andrew Tridgell
4d8fbdfcfd Plane: fixed spoiler left rudder order
thanks to @jgilbertfpv for noticing
2018-11-20 20:10:00 +11:00
Andrew Tridgell
1d00d26b9e Plane: added parameters for crow flaps
DSPOILER_CROW_W1 and DSPOILER_CROW_W2 for inner and outer control
surfaces
2018-11-20 10:00:38 +11:00
jgilbertfpv
4d6547c533 Plane: added crow brakes and diff. spoilers
added crow braking via flap channel to differential spoilers and
reversed dspoiler outputs because having the inner elevon go up and
outer go down causes tip stall. now inner goes down, outer goes
up. still could use a percentage adjustment to change how much throw
each surface gets when using flap input.
2018-11-20 10:00:38 +11:00
Andrew Tridgell
987b556299 Plane: disable crash detection if no GPS and no airspeed 2018-11-19 07:32:20 +11:00
Andrew Tridgell
b660022b20 Plane: handle long GPS loss in crash detector
fixes issue #9349
2018-11-19 07:32:20 +11:00
DOMINATOR\Eugene
802ae94e2c ArduPlane: move airspeed update to library 2018-11-17 07:52:42 +11:00
Andrew Tridgell
03f1deca9f Plane: support REVERSE_THROTTLE rc option
this provides a more convenient way to setup for reverse throttle
2018-11-16 08:33:35 +11:00
Andrew Tridgell
da69bf3391 Plane: added an abstraction for reverse thrust
use have_reverse_thrust() and get_throttle_input()
2018-11-16 08:33:35 +11:00
Peter Barker
a5c34f6172 Plane: OpticalFlow takes care of its own logging 2018-11-13 10:40:23 +11:00
Peter Barker
e53a009a35 Plane: do not pass ahrs to opticalflow constructor 2018-11-13 10:40:23 +11:00
Peter Barker
12c67ecaab Plane: move sending of optical flow status up to base class 2018-11-13 10:40:23 +11:00
Andrew Tridgell
c59b2c156a Plane: fixes for Q_TRIM_PITCH
improved documentation and variable names
2018-11-12 17:05:04 +11:00
IamPete1
5a7bd61e8c Quadplane: add trim params 2018-11-12 17:05:04 +11:00
Andrew Tridgell
85a1f9e40d Plane: added ACCZ pid tuning 2018-11-12 15:36:39 +11:00
Andrew Tridgell
432d786f82 Plane: pass height to landing gear update 2018-11-10 21:24:19 +11:00
Michael du Breuil
8ce0460daf Plane: Remove old parameter conversion 2018-11-10 18:58:54 +11:00
Michael du Breuil
8e906e0ba0 Plane: Add support for a loiter to alt approach to VTOL landing 2018-11-10 18:58:54 +11:00
Andrew Tridgell
f89c770c46 Plane: moved LANDING_GEAR to common RC_Channel 2018-11-09 14:35:14 +11:00
Eugene Shamaev
01178a75e9 Plane: added landing gear support 2018-11-09 14:35:14 +11:00
Peter Barker
818bb8d56d Plane: don't pass ahrs to terrain constructor 2018-11-08 20:59:45 +11:00
Peter Barker
4b68ca79dc Plane: stop passing ahrs to Mission constructor 2018-11-08 10:01:16 +09:00
Andrew Tridgell
f2b8067023 Plane: pass manual_rc_mask to iocmu mixer 2018-11-07 07:35:45 +11:00
Andrew Tridgell
c3d434bc35 Plane: pass mixing gain to iomcu 2018-11-07 07:35:45 +11:00
Andrew Tridgell
d5c29fc57e Plane: use IOMCU mixing if available 2018-11-07 07:35:45 +11:00
Michael du Breuil
1c54fa0230 Plane: Remove old battery conversion that conflicts with new monitor 2018-11-06 10:18:39 +09:00