Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,427 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

1520 Commits

Author SHA1 Message Date
Jason Short b56dc44e61 ACM : Fix enduf 2012-09-10 21:25:53 -07:00
Jason Short 24f80c632c ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
Jason Short 65dc4ccc6d ACM : Added centralized Iterm logging at a lower rate. Logs all iterms. 2012-09-10 20:26:48 -07:00
Jason Short 63aec7510e ACM Mavlink - fixed comparison of unsigned to signed int by casting to uint8_t 2012-09-10 20:22:57 -07:00
Jason Short 2fcc7d3b22 ACM : Params - formatting cleanup 2012-09-10 20:22:11 -07:00
Andrew Tridgell ea78121f1b ACM: use spare CPU cycles to read the magnetometer 2012-09-10 11:38:18 +09:00
rmackay9 7a0189fb2c ArduCopter: modified mainloop timing to be in sync with the arrival of new data from the IMU. 
This reduces the maximum delay between when new sensor data arrives and when it is actually used by about 5ms.
 2012-09-10 11:37:53 +09:00
rmackay9 4e85e545bf ArduCopter: added NUM_IMU_SAMPLES_FOR_XYZHZ definitions for MPU6000 and Oilpan to allow more syncing of the mainloop with the arrival of data from the IMU. 2012-09-10 11:37:48 +09:00
rmackay9 8f993cde2b ArduCopter: bug fix for ROI not working if user did not have a camera mount 
Changed verify_nav_roi command to attempt to point at the target if our camera mount type is not pan_tilt nor pan_tilt_roll
 2012-09-10 02:03:32 +09:00
Andrew Tridgell 1fecd135ef ACM: use compass.accumulate() in ArduCopter 
this gives us a much less noisy magnetometer
 2012-09-08 10:06:04 +10:00
Michael Oborne 1d0d45a95f Fix Approach Altitude min 2012-09-06 17:43:58 +08:00
Pat Hickey b52738662a APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE 2012-09-05 15:36:57 -07:00
rmackay9 af2502c739 ArduCopter: upgraded firmware version to 2.7.3 2012-09-02 12:58:16 +09:00
rmackay9 3e6966c33d ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2. 
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
 2012-09-02 12:51:23 +09:00
rmackay9 6c1bd815c1 ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW 2012-09-02 12:47:27 +09:00
Craig Elder c83d1402fb Arducopter: Release 2.7.2 2012-08-31 19:18:10 -07:00
Andrew Tridgell 0b2cbbb677 ACM: added TELEM_DELAY to ArduCopter 2012-08-30 09:03:01 +10:00
Jason Short 0ab8b85a78 ACM Log.pde : whitespace clean up 2012-08-28 21:22:07 -07:00
Jason Short 91bc3705c1 ACM : revert back to the 2.6 climb rate calc 
The current filter is outputting wild oscillations.
 2012-08-28 21:22:07 -07:00
Craig Elder 3403e1b78d Arducopter: increased MAVLINK delay to 6s to reduce the chance of xBee bricking 
Arduplane:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
Ardurover:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
 2012-08-28 20:09:10 -07:00
rmackay9 4978e0c23f ArduCopter: increased Stabilize Roll and Pitch I term to 0.05 (was 0.01) based on feedback from Jason 2012-08-29 11:34:53 +09:00
Craig Elder 94957b3529 Arducopter: Preparing for 2.7.2 Release 2012-08-28 18:30:41 -07:00
Jason Short b757c7130d ACM : Logging updates 2012-08-28 15:40:08 -07:00
Jason Short 52def45ba0 ACM: Altitude Adjust 2012-08-28 15:40:08 -07:00
Jason Short 24486c75b5 ACM : Log Timing 2012-08-28 15:40:08 -07:00
rmackay9 6f236f0c3b ArduCopter: increase SPI bus speed to 2Mhz after IMU initialisation has completed (MPU6000 accepts maximum of 1Mhz for some registers but up to 20Mhz for main sensor and interrupt registers) 2012-08-28 17:29:48 +09:00
rmackay9 ccc659e8a9 ArduCopter: reduced Rate Roll and Pitch PID values 
RATE_ROLL_P, RATE_PITCH_P reduced to 0.165 (was 0.185)
RATE_ROLL_D, RATE_PITCH_D reduced to 0.004 (was 0.008)
 2012-08-26 10:45:45 +09:00
uncrustify 593f4bad21 uncrustify ArduCopter/APM_Config.h 2012-08-21 19:19:50 -07:00
uncrustify ad1f20924d uncrustify ArduCopter/config.h 2012-08-21 19:19:50 -07:00
uncrustify 06031868d8 uncrustify ArduCopter/system.pde 2012-08-21 19:19:50 -07:00
uncrustify 4ae0b9dc8a uncrustify ArduCopter/test.pde 2012-08-21 19:19:50 -07:00
uncrustify 8bb14446e5 uncrustify ArduCopter/setup.pde 2012-08-21 19:19:50 -07:00
uncrustify 700e03920a uncrustify ArduCopter/motors.pde 2012-08-21 19:19:50 -07:00
uncrustify a3f6cdc0bd uncrustify ArduCopter/navigation.pde 2012-08-21 19:19:50 -07:00
uncrustify 1d56079ba2 uncrustify ArduCopter/commands_logic.pde 2012-08-21 19:19:50 -07:00
uncrustify f8b7fdf7bb uncrustify ArduCopter/Attitude.pde 2012-08-21 19:19:50 -07:00
uncrustify 865deed57e uncrustify ArduCopter/Parameters.pde 2012-08-21 19:19:50 -07:00
uncrustify e4932136d9 uncrustify ArduCopter/ArduCopter.pde 2012-08-21 19:19:50 -07:00
uncrustify dfc77d37ca uncrustify ArduCopter/Log.pde 2012-08-21 19:19:50 -07:00
uncrustify 5dceeed7ce uncrustify ArduCopter/Parameters.h 2012-08-21 18:57:21 -07:00
uncrustify 6d9b4ec785 uncrustify ArduCopter/defines.h 2012-08-21 18:57:21 -07:00
uncrustify d662339d11 uncrustify ArduCopter/config_channels.h 2012-08-21 18:57:21 -07:00
uncrustify 11cf4a78eb uncrustify ArduCopter/UserVariables.h 2012-08-21 18:56:57 -07:00
uncrustify f3559747b0 uncrustify ArduCopter/GCS.h 2012-08-21 18:56:56 -07:00
uncrustify 66f63fe415 uncrustify ArduCopter/APM_Config_mavlink_hil.h 2012-08-21 18:56:56 -07:00
uncrustify 196fff3d55 uncrustify ArduCopter/planner.pde 2012-08-21 18:56:56 -07:00
uncrustify ad743cba6c uncrustify ArduCopter/sensors.pde 2012-08-21 18:56:50 -07:00
uncrustify c7d32df65f uncrustify ArduCopter/UserCode.pde 2012-08-21 18:56:01 -07:00
uncrustify e8760bec78 uncrustify ArduCopter/GCS_Mavlink.pde 2012-08-21 18:56:01 -07:00
uncrustify fef945e2cb uncrustify ArduCopter/flip.pde 2012-08-21 18:56:01 -07:00