Andrew Tridgell
3a78255e54
Frame_Params: added WLToys V383 parameters
...
for HeliQuad frame
2017-10-03 10:16:41 +11:00
Lucas De Marchi
015242c89b
Tools: add params for Aero Compute Board
...
These are the parameter for Aero Compute Board to fly Intel Aero RTF
without the flight controller, using just the internal sensors
on the Linux side.
2017-09-21 07:59:20 -07:00
Randy Mackay
ebea292d63
Tools: add frame params for eLAB 470 quad
2017-09-13 17:55:05 +09:00
Jacob Walser
19086e34f0
Frame_params: update BlueROV2 defaults for 3.5.1
2017-08-30 17:49:34 -04:00
Andrew Tridgell
224dc439ab
Tools: updated parameters to remove ELEVON and VTAIL settings
2017-08-01 08:25:32 +10:00
Matt
3fd393bc21
FRAME_PARAMS: Solo final parameters for AC 3.5.0+
...
This is the final list of parameters the Solo requires for ArduCopter
3.5.0+ that differ from ArduCopter 3.5.0 defaults. I ran a
`mavparmdiff` on the defaults vs Solo to generate this list. I added
`FRAME_TYPE` back even though it is default just because it is rather
critical. I removed all the parameters that are individual vehicle
specific (calibrations, pressure, etc).
2017-07-17 09:09:35 +09:00
Randy Mackay
59503f15cb
Tools: update eLAB VEK AI parameters
2017-06-29 16:14:15 +09:00
Randy Mackay
bee666cd7a
Tools: update eLAB VEK rover param file
2017-06-28 15:40:21 +09:00
murata
0a57177cee
Tools: eLab LAB445 parameter file
2017-06-28 10:26:25 +09:00
Randy Mackay
d934088660
Tools: update realflight simulator params
2017-06-26 17:28:48 +09:00
Randy Mackay
62903b7639
Tools: add realflight standard params
2017-06-26 13:08:05 +09:00
Randy Mackay
e6f1e14b61
Tools: fix eLab VEK parameter file
2017-06-24 13:29:59 +09:00
Randy Mackay
58dd0592ad
Tools: eLAB VEK default param update
...
We should always require arming, thanks @khancyr for noticing this!
2017-06-21 18:20:59 +09:00
Randy Mackay
f8ee82e708
Tools: remove old 3DR standard param files
2017-06-21 15:16:49 +09:00
Randy Mackay
0037ec086a
Tools: rename param files for eLAB
2017-06-21 15:08:38 +09:00
Randy Mackay
3159361970
Tools: add param file for eLAB VEK AI rover
2017-06-21 15:08:38 +09:00
Randy Mackay
32cb3f8764
Tools: add e-flight convergence parameter file
2017-06-12 09:41:33 +09:00
Jacob Walser
1a52acc99e
Frame_params: Remove calibration parameters from bluerov2 standard
2017-05-27 11:30:56 -04:00
Jacob Walser
193e590592
Frame_params: add standard bluerov2 parameter file
2017-05-27 11:30:56 -04:00
Andrew Tridgell
fd6625e09d
Frame_params: drop target temp for Solo to 45
2017-05-24 08:41:16 +10:00
Lucas De Marchi
cacfc4cb2f
Tools: set mavlink log backend for Intel Aero RTF
2017-04-22 10:58:26 +09:00
Randy Mackay
3df5484a39
Tools: update intel aero default params
...
Increase expected barometer noise, reduce roll gains
2017-04-20 14:07:03 +09:00
Randy Mackay
56281f9c79
Tools: update intel aero default params
2017-04-20 10:58:11 +09:00
Randy Mackay
41d999994a
Tools: update intel aero rtf default parameters
2017-04-18 20:32:36 +09:00
Matt
29adf300ee
Tools: update default Solo parameters running AC3.5
2017-04-18 11:00:26 +09:00
Randy Mackay
835aa56777
Tools: intel aero params enable failsafes
2017-04-15 18:39:13 +09:00
Andrey Kolobov
2ed63d24bd
XPlane: adding airfoils required to for XPlane
...
needed to load some of the RC sailplane models used for SITL
2017-04-10 19:11:24 +10:00
Lucas De Marchi
2ff720f99f
Frame_params: add default params for Intel Aero RTF
2017-03-24 12:06:19 +11:00
Randy Mackay
e3bca10e9a
Tools: fix Solo param file name
2017-03-14 11:36:08 +09:00
Randy Mackay
6e47eaf3c2
Tools: initial Solo default params
...
These are not perfect but it's a start
2017-03-14 11:10:19 +09:00
Randy Mackay
c9ff028ec3
Tools: update IRIS param file for AC3.5
2017-02-28 16:43:09 +09:00
Randy Mackay
cc67335b26
Tools: update EnRoute frame parameters
2017-02-28 14:09:41 +09:00
Julien Beraud
a5523a4b94
Frame_Params: Remove unexisting param
...
FRAME has disappeared and causes a crash at startup
2017-01-23 21:23:16 +11:00
Mathieu OTHACEHE
4daa4e9df9
Tools: remove deleted parameters
...
RCx_REV and SERVO_RNG_ENABLE no longer exists, they need to be erased
from param files.
2017-01-13 20:19:30 +11:00
Randy Mackay
07e5b43132
Tools: add FRAME_CLASS to bebop parameter files
2017-01-13 07:46:27 +09:00
Andrew Tridgell
7c058c922f
Tools: removed ARSPD_ENABLE parameters
2016-12-05 16:51:49 -08:00
Randy Mackay
3576d06638
Tools: EX700 proximity ignores legs
2016-11-26 11:39:26 +09:00
Randy Mackay
7e031262c3
Tools: remove duplicate from Bebop2 params file
2016-11-07 09:54:58 +09:00
Randy Mackay
d9e476c96f
Tools: Bebop2 param get radio failsafe
...
put params in alphabetical order
2016-11-07 09:53:37 +09:00
Randy Mackay
fb47480b51
Tools: Bebop params get ground effect compensation
...
Also put in alphabetical order
2016-11-07 09:52:41 +09:00
Randy Mackay
b34c14ef67
Tools: update EX700 parameter file
...
swapped around lidar, TX1 and SF40c input channels
2016-11-05 17:10:40 +09:00
Randy Mackay
c19ef757ef
Tools: add IRIS AC3.4 params file
2016-11-03 12:38:56 +09:00
Mathieu OTHACEHE
5e42800b5e
Disco: add LED support
...
Use RGBLed generic implementation to support Disco LED.
2016-10-26 11:56:11 -03:00
Francisco Ferreira
79cb4ea595
Tools: set Disco battery capacity in frame parameters
2016-10-24 09:24:11 -03:00
Francisco Ferreira
832fec68b7
Tools: set Bebop battery capacity in frame parameters
2016-10-24 09:24:11 -03:00
Mathieu OTHACEHE
01804063f6
Disco: set SCHED_LOOP_RATE to 200
...
Video stabilization on stock firmware requires main loop to run at
200Hz.
2016-10-20 09:07:54 -03:00
Mathieu OTHACEHE
6ccbbb0074
Disco: set WP_LOITER_RAD to 30
...
Use the same value for LOITER radius as in stock autopilot.
2016-10-20 09:07:54 -03:00
Mathieu OTHACEHE
352551a239
Bebop2: Remove CR in param file.
...
Remove CR in Parrot_Bebop2.param line endings.
2016-10-20 09:07:07 -03:00
Andrew Tridgell
227bd3d13c
Frame_params: enabled FS_THR_ENABLE on Bebop and Bebop2
2016-10-18 21:00:13 +11:00
Andrew Tridgell
fe3d57b19c
Frame_params: fixed scaling errors in Bebop parameters
2016-10-18 08:28:58 +11:00