Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
21,179 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

72 Commits

Author SHA1 Message Date
Leonard Hall 6c40d6f774 Copter: remove single frame's servo objects 2016-04-01 11:59:30 +09:00
Leonard Hall 44180e44df Copter: remove coax servo objects 
servos moved to AP_MotorsCoax class
 2016-04-01 11:59:30 +09:00
Leonard Hall a00a9601a4 Copter: AP_MotorsCoax now uses 4 servos 2016-04-01 11:59:30 +09:00
Andrew Tridgell f19922fec5 Copter: added LAND_SPEED_HIGH parameter 
this is the descent rate for the first part of a landing. Separating
this from WPNAV_SPEED_DN allows for independent tuning of fast fwd
flight from landings
 2016-03-30 15:54:20 +11:00
Lucas De Marchi 34155c09e6 ArduCopter: Update path locations for parameters 
Thanks to Francisco Ferreira for noticing that.
 2016-03-23 17:50:38 -03:00
Don Gagne cae7ea0d13 Add @Volatile, @ReadOnly support 2016-03-17 10:58:05 +11:00
Don Gagne e9651dacfe Copter: update parameter description increments 2016-03-08 09:27:50 +09:00
Randy Mackay a93a0d370a Copter: add throw mode to aux switches 2016-03-03 15:30:03 +09:00
Randy Mackay 20b6688e77 Copter: add throw to FLTMODE param descriptions 2016-03-03 12:18:20 +09:00
Paul Riseborough a7b69366a1 Copter: Add flight mode for throw launch 
The is commit adds a new flight mode called 'Throw' to Copter that enables the copter to be thrown into the air to start motors. This mode can only be netered when the copters EKF has a valid position estimate and goes through the following states

Throw_Disarmed - The copter is disarmed and motors are off.
Throw_Detecting - The copter is armed, but motors will not spin unless THROW_MOT_START has been set to 1. The copter is waiting to detect the throw. A throw with an upwards velocity of at least 50cm/s is required to trigger the detector.
Throw_Uprighting - The throw has been detected and the copter is being uprighted with 50% throttle to maximise control authority. This state transitions when the copter is within 30 degrees of level.
Throw_HgtStabilise - The copter is kept level and height is stabilised about the target height which is 3m above the height at which the throw release was detected. This state transitions when the height is no more than 0.5m below the demanded height.
Throw_PosHold - The horizontal motion is arrested and the copter is kept at a constant position and height.
 2016-03-03 12:18:13 +09:00
Randy Mackay dc2ec5db18 Copter: add Bitmask param description for PILOT_THR_BHV 2016-01-14 15:21:59 +09:00
Jonathan Challinger 8965185587 Copter: add "high throttle cancels landing" option 2016-01-14 15:21:54 +09:00
Randy Mackay 6a67ad706c Copter: add Relays to aux switch parameter descriptions 
Also fix formatting of new options in switches.cpp
No functional change
 2016-01-08 12:13:37 +09:00
Randy Mackay 2927d6b2df Copter: add RTL_CONE_SLOPE param description values 2016-01-07 17:22:35 +09:00
Jonathan Challinger 3800c66f07 Copter: add RTL_CONE_SLOPE 2016-01-07 17:22:33 +09:00
Randy Mackay 15e673f5ae Copter: fix precland parameter description prefix 
Thanks to Thomas Stone for finding this

No functional change
 2016-01-07 12:55:44 +09:00
Andrew Tridgell 907a680a3b Copter: always call load_all 
this ensures defaults file works on first start after erase
 2016-01-07 09:33:00 +11:00
Andrew Tridgell 5c94b61f49 Copter: support up to 14 input channels for all boards 2016-01-04 08:22:51 +11:00
Randy Mackay cfff57257e Copter: shorten precision landing param prefix 2015-12-31 15:30:39 +09:00
Randy Mackay 1155b1f557 Copter: remove precision landing PI controller 
This controller has been moved into the precision landing class
 2015-12-31 15:30:36 +09:00
pepevalbe 3b3205304b Copter: added group parameter for AP_Notify library 2015-12-31 11:33:08 +09:00
Andrew Tridgell d14056fa1e Copter: fixed build warnings 2015-12-20 17:55:40 +11:00
Peter Barker f57d237181 Copter: support multiple simultaneous backends 2015-12-03 13:21:51 +11:00
Leonard Hall 6eca767db0 Copter: reduce autotune min D param default to 0.001 2015-11-30 11:21:54 +09:00
Tom Pittenger 34d6d985e9 Copter: Add support for ADS-B 2015-11-27 15:02:15 +09:00
Andre Kjellstrup c2a810d72a Copter: update RTL altitude param description 2015-11-21 12:44:10 +09:00
Caio Marcelo de Oliveira Filho c7acc46d09 Copter: use millis/micros/panic functions 2015-11-20 12:26:31 +09:00
Jonathan Challinger 5086168b03 Copter: add RTL_SPEED parameter 2015-11-16 10:20:32 +09:00
Randy Mackay 731c44d053 Copter: allow terrain to be excluded from build 2015-11-14 12:38:47 +09:00
Andrew Tridgell 9214b85cf1 Copter: fixed path for AC_InputManager for heli 2015-11-13 13:49:25 +11:00
Robert Lefebvre 5cc4f41d85 Copter: Helicopter: to use new Stab_Col and Acro_Col functions. 2015-11-12 19:37:23 +09:00
Robert Lefebvre 34fb600c4f Copter: Utilize Input Manager Class 2015-11-12 19:37:22 +09:00
Lucas De Marchi 030fd046c7 ArduCopter: remove check for MAVLINK_COMM_NUM_BUFFERS 2015-11-04 12:14:15 +11:00
Lucas De Marchi e9b6c76454 ArduCopter: fix wrong printf format for 32 bits 
"micros() - before" doesn't return a long value. Use "%u".
 2015-10-30 14:35:34 +09:00
Lucas De Marchi 20c6ffc5e3 Replace use of UARTDriver::printf_P() with UARTDriver::printf() 
This also starts to show warnings on places that were already using
wrong printf format strings.
 2015-10-30 14:35:25 +09:00
Lucas De Marchi 6f4904189b Replace use of println_P() with println() 2015-10-30 14:35:22 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM 
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
 2015-10-30 14:35:16 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR 
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
 2015-10-30 14:35:04 +09:00
Caio Marcelo de Oliveira Filho 49a42dc985 SITL: use a SITL namespace 2015-10-22 11:04:42 -02:00
Andrew Tridgell 053194fd51 Copter: added EK2_* parameters and EKF2 instance 2015-09-23 11:56:33 +10:00
Randy Mackay 7db77482f5 Copter: precision landing velocity PI object 
Follow up changes required to actually use this PI during landing
 2015-08-31 18:00:32 +09:00
Randy Mackay 26ded641db Copter: integrate Precision Landing lib 2015-08-31 18:00:28 +09:00
Robert Lefebvre 990761a13b Copter: Create new heli RSC RC Channel object. 2015-08-31 11:27:50 +09:00
Fredrik Hedberg 66d9d38750 Copter: Use AP_MotorsHeli_Single for HELI_FRAME. 2015-08-31 11:27:32 +09:00
Andrew Tridgell ff934d5bca Copter: added FS_CRASH_CHECK parameter 
this allows automatic crash detection to be disabled
 2015-08-31 12:15:46 +10:00
Andrew Tridgell 90909f2b4a Copter: added DISARM_DELAY parameter 
this allows automatic disarming to be disabled, or set to a shorter or
longer time as appropriate for the user
 2015-08-31 11:44:08 +10:00
Stewart Loving-Gibbard 7cb494d8e2 Copter: Moving to RSSI library for reading various kinds of RSSI, with the possibility of adding more. 
* Retains ability to read from Analog Pin
* Adds ability to read RSSI from PWM channel value as is done in OpenLRSng, EazyUHF, and various other LRS.
* Handles any type of RSSI that provides RSSI values inverted - i.e. when the low value is the best signal and the high value is the worst signal.
* Has different key names from all existing RSSI parameters to provide for a clean break and easier distinguishing.
* Existing parameters are marked as obsolete
 2015-08-29 08:05:59 +10:00
Randy Mackay 71cc89d107 Copter: add ACCEL_Z_FILT_HZ parameter description 
Also fixed parameter links to ATC, BATT and MOT libraries
 2015-08-26 11:17:50 +09:00
Randy Mackay 43fa9c8ae3 Copter: fix Autotune param descriptions 2015-08-23 14:56:41 +09:00
Randy Mackay a10a74d498 Copter: AUTOTUNE_MIN_D param to allow controlling minimum D 2015-08-23 14:56:39 +09:00