Andrew Tridgell
4ca3546551
SRV_Channel: added SERVO_DEF_RATE parameter
...
this allows for the default rate of servo outputs to be set. This is
needed for some planes where 50Hz isn't enough (eg. tailsitters)
2017-07-24 14:07:28 +10:00
Andrew Tridgell
5b43698e25
HAL_PX4: added rcout set_detault_rate()
2017-07-24 14:07:28 +10:00
Andrew Tridgell
0188d6463d
AP_HAL: added rcout set_detault_rate()
2017-07-24 14:07:28 +10:00
Kevin Lopez Alvarez
df406c4389
AP_Compass : increase max possible offset
2017-07-24 13:48:20 +10:00
Kevin Lopez Alvarez
17f2393c1b
AP_Compass: Decrease LIS3MDL ODR and timer
2017-07-24 13:48:20 +10:00
Kevin Lopez Alvarez
16a96b0643
HAL_PX4: Adjust SPI params for ppro
...
Add SPI prescalers for 180 MHz and decrease LIS3MDL SPI speed
2017-07-24 13:48:20 +10:00
Kevin Lopez Alvarez
08b531e6a8
AP_Compass: LIS3MDL correct orientation
2017-07-24 13:48:20 +10:00
Kevin Lopez Alvarez
cf8c1c2665
AP_Compass: Remove comments and use correct board number
2017-07-24 13:47:44 +10:00
Kevin Lopez Alvarez
a5a5bd3a95
AP_BoardConfig: Remove comments and use correct board number
2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez
ca3627c140
AP_InertialSensor: add ppro support
2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez
88958b2dbf
HAL_PX4: add ppro support
2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez
1467daee2a
AP_Compass: add ppro support
...
disable lis3mdl for now
2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez
d6d1a3e08c
AP_HAL_PX4: initial FMUv4pro support
2017-07-24 13:45:37 +10:00
Kevin Lopez Alvarez
fb6f368575
AP_HAL: initial FMUv4pro support
2017-07-24 13:45:37 +10:00
Kevin Lopez Alvarez
a51bf8c918
AP_BoardConfig: initial FMUv4pro support
2017-07-24 13:45:37 +10:00
Kevin Lopez Alvarez
d0ec5a6111
AP_BattMonitor: initial FMUv4pro support
2017-07-24 13:45:37 +10:00
Kevin Lopez Alvarez
18dab4829a
AP_Baro: initial FMUv4pro support
2017-07-24 13:45:37 +10:00
Andrew Tridgell
401a6f5373
AP_BoardConfig: fixed FMUv1 IO update
...
when doing an IO firmware update uartC is used to talk to the IO
bootloader. We need to close uartC to prevent corruption of the
bootloader protocol. The uart is automatically re-opened when it is
needed
2017-07-22 16:25:17 +10:00
Michael du Breuil
126296b61d
AP_Arming: Compass calibration running is a pre arm failure, rather then an arming failure
2017-07-21 13:38:50 +09:00
Peter Barker
1fd4eb4bfb
DataFlash: do not send in-progress messages back to streaming GCSs
2017-07-20 14:57:54 +01:00
Peter Barker
90c2db119e
DataFlash: send log data on requesting channel only
2017-07-20 14:57:54 +01:00
Peter Barker
954eda990a
AP_Arming: prepare log for arming and check it is ready
...
Also add comment that this should be the last check to be made
2017-07-19 16:37:28 +01:00
Peter Barker
0769432e63
DataFlash: move log-write-started logic to be backend-specific
2017-07-19 16:37:28 +01:00
Peter Barker
1f0a14ab33
DataFlash: add PrepForArming method
2017-07-19 16:37:28 +01:00
Peter Barker
31083653b2
DataFlash: examples: move starting of new logs into DataFlash
2017-07-19 16:37:28 +01:00
Francisco Ferreira
a1115ba5d0
DataFlash: move some code from WritesOK into a new ShouldLog method
2017-07-19 16:37:21 +01:00
Peter Barker
b572c13ca9
DataFlash: move starting of new logs into DataFlash
2017-07-19 16:37:16 +01:00
Peter Barker
4234f4ef7a
DataFlash: move _initialised into DataFlash_Backend
2017-07-19 16:37:16 +01:00
Peter Barker
999a5e6cda
AP_Arming: correct bit used to indicate blended-gps-checking
2017-07-19 16:34:57 +01:00
Peter Barker
b8ddf8a289
AP_Arming: use HAL_HAVE_BOARD_VOLTAGE rather than magic-0
2017-07-19 16:34:57 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas
b791fef7cb
AP_GPS: Publish the number of satellites in the RTK correction messages, and the age of the RTK correction messages
2017-07-19 20:42:23 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
ae47ac5a09
AP_GPS: implement missing "RTK number of satellites" and "RTK correction age" information in the GPS2_RAW MAVLink message
2017-07-19 20:42:23 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
059c213d19
AP_GPS: Improve comments and documentation (NFC)
2017-07-19 20:42:23 +09:00
Randy Mackay
cf47a0d563
AP_AdvancedFailsafe: minor formatting fix
2017-07-19 15:24:21 +09:00
Andrew Tridgell
732dc5984a
AP_Compass: added COMPASS_TYPEMASK parameter
...
this allows driver type to be disabled, to avoid probing them and
wasting CPU on sensors that are not being used
This also moves UAVCAN compass to be detected last, as discussed in the
dev call
2017-07-19 15:53:22 +10:00
Michael du Breuil
5684a5dd36
AP_GPS: Only setup state's instance field during init
2017-07-18 21:21:50 +01:00
Michael du Breuil
52ddaa3e72
DataFlash: POS.RelOriginAlt should be NaN if unknown
2017-07-18 21:21:17 +01:00
Andrew Tridgell
82e7e44cc3
AP_GPS: fixed UAVCAN as 2nd GPS
...
This fixes the issue here:
https://discuss.ardupilot.org/t/ac3-6-dev-dual-gps-issues/19172
thanks to Francisco for spotting the issue
this is tested with UAVCAN as 2nd GPS, ublox as primary
2017-07-18 18:57:55 +01:00
Peter Barker
eb1cf0e73a
GCS_MAVLink: remove MSG_STATUSTEXT entirely
2017-07-18 16:12:59 +01:00
Michael du Breuil
e092a83ca2
AP_Landing: Deepstall: Allow requiring a minimum altitude to abort a landing
2017-07-17 08:43:50 -07:00
Michael du Breuil
202b40562f
Landing: Fix bad deepstall parameter group
2017-07-17 08:43:50 -07:00
Michael du Breuil
8de96ee4a1
AP_Param: Check for duplicate group id's before handling groups
2017-07-17 08:43:50 -07:00
Peter Barker
06647cde2c
GCS_MAVLink: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up
2017-07-17 14:17:19 +01:00
Peter Barker
bd28bdd907
GCS_MAVLink: move handling of MAG_CAL command longs up
2017-07-17 14:17:19 +01:00
Peter Barker
6b53b5b5f3
AP_Compass: make handle_mag_cal_command return type stricter
2017-07-17 14:17:19 +01:00
Peter Barker
a7e57aa3fc
GCS_MAVLink: move MAV_CMD_START_RX_PAIR handling to base class
2017-07-17 14:17:19 +01:00
priseborough
58d58b4eac
AP_NavEKF3: Initialise EKF origin height to field elevation
...
Enables copters to set bit position 2 in the EK3_OGN_HGT_MASK parameter without having a large jump in reported local position height.
2017-07-17 02:22:02 +01:00
priseborough
ac568bae53
AP_NavEKF2: Initialise EKF origin height to field elevation
...
Enables copters to set bit position 2 in the EK2_OGN_HGT_MASK parameter without having a large jump in reported local position height.
2017-07-17 02:22:02 +01:00
priseborough
0827b13feb
AP_NavEKF3: Fix default behaviour for height origin corrections
...
Previous default was to apply in-flight height origin changes to local position instead of to reported origin height. This caused problems with copters that took off before getting GPS lock.
2017-07-17 02:22:02 +01:00
priseborough
027552ef44
AP_NavEKF2: Fix default behaviour for height origin corrections
...
Previous default was to apply in-flight height origin changes to local position instead of to reported origin height. This caused problems with copters that took off before getting GPS lock.
2017-07-17 02:22:02 +01:00
