Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
41,772 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

22372 Commits

Author SHA1 Message Date
yaapu b4bdc76a53 AP_RCProtocol: handle 0x10 and 0x00 frames, check scheduler delay and fix incoming crc 
Respond to 0x10 when the rx is controlling bandwidth, else respond only to 0x00
but in this case never exceed a max number of consecutive frames.
Always respond to polling and if necessary send a null frame.
moved delay check after get_telem_data() to account for scheduler time
align incoming to outgoing crc
 2020-02-21 09:29:15 +11:00
yaapu 0c5618c9e7 AP_Frsky_Telem: add semaphores to ahrs access and fix potential array out of bounds access 
use a semaphore for non atomic ahrs calls and fix a potential array out of bounds
access for faster than sport telemetry links.
 2020-02-21 07:54:59 +11:00
Pierre Kancir 95ee01082f AP_HAL_SITL: update search for dumpstack.sh 2020-02-20 20:41:26 +11:00
Andy Piper 387b5e7002 AP_Camera: bug fixes to support 5-key remote RunCams 
allow the boot-time recording state to be configured
only process events on state transitions. Simplifies logic and debugging.
support regular Split 2s
allow menu enter/exit in 5-key mode
match betaflight with 5-Key OSD which requires an "enter" key
 2020-02-20 19:58:43 +11:00
Andrew Tridgell 20ea1a3dc7 GCS_MAVLink: don't send statustext from other than main thread 
This fixes high stack usage in the RCIN thread when it notifies the
GCS of a new RCIN protocol. The problem is severe when signing is
enabled, as signing adds over 500 bytes to stack cost of sending a
mavlink msg

fixes issue #13615
 2020-02-20 10:39:29 +11:00
Michael du Breuil d7a59bc449 AP_Scripting: Reduce the sleep time with no scripts 
Lowering the sleep time when no scripts are pending, causes starting a
REPL session to respond much faster (this cuts the latency from up to 10
seconds to 1 second before the session is ready to start).

Also lowers the default scripting debug level to hide the statustext
from users, as in the general case this is just a spammy message if it
occurs, and we should be finding better reporting bits to get this to
the user.
 2020-02-19 13:24:23 -07:00
Andrew Tridgell 772438f3ed AP_NavEKF3: fixed use of antenna position when switching GPS primary 
when GPS primary switches we were using a position which had not been
corrected for antenna offset. This was used for calculating the reset
for sensor change.

This fixes that (trivial fix) and also fixes a similar issue on
position reset
 2020-02-19 18:12:54 +11:00
Andrew Tridgell 9030590a88 AP_NavEKF2: fixed use of antenna position when switching GPS primary 
when GPS primary switches we were using a position which had not been
corrected for antenna offset. This was used for calculating the reset
for sensor change.

This fixes that (trivial fix) and also fixes a similar issue on
position reset
 2020-02-19 18:12:54 +11:00
Andrew Tridgell b49a76bb20 AP_Filesystem: fixed EOF on file read 
should return number of bytes read. This fixes an issue with MAVProxy
ftp client
 2020-02-19 18:11:41 +11:00
Andrew Tridgell 1cb711d35d AP_Filesystem: make SITL take paths relative to starting directory 
this makes SITL filesystem behave more like a real device
 2020-02-19 18:11:41 +11:00
Siddharth Purohit f00a39af52 AP_Compass: run style script on Compass.cpp 2020-02-19 13:59:53 +09:00
Siddharth Purohit faacd03e3a AP_Common: add method that can help to put contraint on accessor type 2020-02-19 13:59:53 +09:00
Siddharth Purohit 1d2985e967 AP_Param: add method to find key of top level group variable by pointer 2020-02-19 13:59:53 +09:00
Siddharth Purohit 8a7dcafa0f SITL: add parameter MAG_DEVID in SITL 2020-02-19 13:59:53 +09:00
Siddharth Purohit 8d227d401a AP_Compass: modify compass driver to support consistent ordering and hotplugging 2020-02-19 13:59:53 +09:00
Siddharth Purohit 545331024f AP_NavEKF3: Primary compass is always at serial number 0 2020-02-19 13:59:53 +09:00
Siddharth Purohit 4cca1c307c AP_NavEKF2: Primary compass is always at serial number 0 2020-02-19 13:59:53 +09:00
Siddharth Purohit 7da331535c AP_Arming: add arming message for compass not detected but assigned 2020-02-19 13:59:53 +09:00
Siddharth Purohit defc1b5fcb ArduCopter: add arming message for compass not detected but assigned 2020-02-19 13:59:53 +09:00
Siddharth Purohit 653fad44d4 AP_Arming: Primary Compass is always at serial# 0 2020-02-19 13:59:53 +09:00
Peter Barker baf375e7a0 AP_WheelEncoder: add param docs for new PID filter parameters 2020-02-19 15:09:16 +11:00
Peter Barker e85a4dcd7d AP_Soaring: remove empty Units: parameter doc entries 
These break parameter generation
 2020-02-19 15:09:16 +11:00
Peter Barker 6d7ee65a5f AP_AdvancedFailsafe: correct WP_GPS_LOSS param documentation block 2020-02-19 15:09:16 +11:00
Peter Barker 370e378bf6 AP_ICEngine: correct IDLE_DB parameter documentation 2020-02-19 15:09:16 +11:00
Rishabh c65d1ff8d8 HAL_SITL: support new motor orders 2020-02-19 11:28:25 +09:00
Rishabh 08f27f7668 SITL: Added cwx motor setup for hexa, octa and octaquad 2020-02-19 11:28:25 +09:00
Rishabh aec65ed6ff AP_Motors: Added cwx motor setup for hexa, octa and octaquad 2020-02-19 11:28:25 +09:00
Peter Barker 1190b9ff19 AP_Proximity: TeraRangerTower uses intermediate serial class 2020-02-19 11:12:37 +09:00
Peter Barker 107c424a5c AP_Proximity: LightWareSF40C_v09 uses intermediate serial class 2020-02-19 11:12:37 +09:00
Peter Barker 97320e8938 AP_Proximity: TeraRangerTowerEvo uses intermediate serial class 2020-02-19 11:12:37 +09:00
Peter Barker 0d4e72622e AP_Proximity: RPLidarA2 uses intermediate serial class 2020-02-19 11:12:37 +09:00
Peter Barker 788e466c90 AP_Proximity: LightWareSF40C used intermediate serial class 2020-02-19 11:12:37 +09:00
Peter Barker fcdb833f46 AP_Proximity: add intermediate AP_Proximity_Backend_Serial class 2020-02-19 11:12:37 +09:00
Michael du Breuil 1f8c030eba GCS_MAVLink: Allow scripting to start/stop the REPL 2020-02-18 17:23:22 -07:00
Michael du Breuil cf06beb1e6 AP_Scripting: Add support for REPL over MAVLink 2020-02-18 17:23:22 -07:00
Michael du Breuil 296c014d14 GCS_MAVLink: Fix excess trimming of autopilot version 2020-02-19 09:10:02 +11:00
Peter Hall 7bef426531 AP_Logger: EKF4 change flags state from uint16_t to uint32_t 2020-02-19 06:45:07 +11:00
Peter Hall 47e3fda8e9 AP_NavEKF3: add initalized flag and change to uint32_t 2020-02-19 06:45:07 +11:00
Peter Hall e0eeb4f863 AP_NavEKF2: add initalized flag and change to uint32_t 2020-02-19 06:45:07 +11:00
Peter Hall 9ec5355dfc AP_NavEKF: add initalized flag and change to uint32_t 2020-02-19 06:45:07 +11:00
Peter Barker d24d1c587a AP_Scripting: add documentation for DEBUG_LVL parameter 2020-02-18 20:25:58 +09:00
Gone4Dirt 44718cd00f AP_Mission: Check if failsafes should interupt landing approach 2020-02-18 21:03:29 +11:00
Andrew Tridgell 32ecd904bd GCS_MAVLink: use MAV_SYS_STATUS_PREARM_CHECK 
this allows GCS to continually display prearm check status
 2020-02-18 15:16:02 +11:00
Henry Wurzburg bf1b48b940 AP_Notify: add mah consumed to BAT line in OLED displays 2020-02-18 15:15:52 +11:00
Peter Barker 7f64c6159d AP_Landing_Deepstall: correct missing parameter docs 2020-02-18 13:28:03 +11:00
mhefny b935aa3355 SITL:adding slow-motion option argv -d for Quad & Tricopter controllers 2020-02-18 11:31:50 +11:00
mhefny 9cb3662db6 SITL:Webots-better time sync 2020-02-18 11:31:50 +11:00
murata 147a940451 SITL: Indicates that the message is SIM only 2020-02-18 11:23:52 +11:00
Andrew Tridgell b5e091bc84 AP_Airspeed: hide unused parameters for AP_Periph 2020-02-18 11:15:05 +11:00
Matt Lawrence 05b94de9a0 AP_Camera: Make trigger type enum class 2020-02-18 11:13:27 +11:00
Matt Lawrence 27e825b058 RC_Channel: Add GoPro mode toggle Aux switch 2020-02-18 11:13:27 +11:00
Matt Lawrence c84dcd9bf8 GCS_Mavlink: Add routing for GoPro heartbeat 2020-02-18 11:13:27 +11:00
Matt Lawrence a2af217adf AP_Camera: Add handling of GoPro mavlink commands 2020-02-18 11:13:27 +11:00
Michael du Breuil c1a599d0bd AP_Scripting: Reduce memory associated with the sandbox 2020-02-18 10:38:09 +11:00
Peter Barker 87a31c6409 GCS_MAVLink: don't recalculate max parameter count if not streaming params 2020-02-18 10:33:41 +11:00
Peter Hall 4ee17aea3d AP_Scripting: regenerate bindings 2020-02-18 10:18:12 +11:00
Peter Hall a04a34ff6a AP_Scripting: add param get and set example 2020-02-18 10:18:12 +11:00
Peter Hall 1f139414bc AP_Scripting: add param get, set and save bindings 2020-02-18 10:18:12 +11:00
Peter Hall 5164eacc4a AP_Param: add get and set functions 2020-02-18 10:18:12 +11:00
Peter Hall 623c1aa3cd AP_Param: add singleton 2020-02-18 10:18:12 +11:00
Mirko Denecke 899335e30b SITL: fix DisplayName and description of parameter 2020-02-18 09:29:47 +11:00
Mirko Denecke 2f435d5099 SITL: fix DisplayName and description of parameter 2020-02-18 09:29:15 +11:00
Michael du Breuil a0bfc823b3 AP_Scripting: Support libraries holding the scheduler lock 2020-02-18 09:16:10 +11:00
Michael du Breuil c257cea375 AP_Scheduler: Add a lock that is held during all normal operations 2020-02-18 09:16:10 +11:00
Randy Mackay 53fb333f0c AP_Follow: minor format fix to FOLL_ALT_TYPE param desc 2020-02-17 14:30:18 +09:00
pkocmoud 8c764bb568 hwdef: switch to (0) DNA as the default NODEID 2020-02-17 12:48:37 +11:00
pkocmoud 8f6d2aab7a hwdef: add mRo M10025 KITCAN 2020-02-17 12:48:37 +11:00
Andrew Tridgell 2a03144fdb AP_SpdHgtControl: added reset() 2020-02-16 17:04:07 +11:00
Andrew Tridgell 176d3c0b2f AP_TECS: added reset() method 
used at end of VTOL takeoff
 2020-02-16 17:04:07 +11:00
bnsgeyer d4e5e1bd3d AP_Motors: tradheli - fix quad heli collective structure 2020-02-14 09:29:50 +09:00
Randy Mackay e36d4d19e2 AC_AttitudeControl_Heli: fix VFF and ILMI param descriptions 2020-02-14 09:20:17 +09:00
Randy Mackay 5e60ae8a26 AC_PosControl: add missing ACCZ param descriptions 2020-02-14 09:20:11 +09:00
ashvath 66f123e2b4 SITL: Example for skid rover 2020-02-13 09:04:32 +11:00
ashvath 774b79e632 SITL: Parameters for skid rover 2020-02-13 09:04:32 +11:00
ashvath 5e2b693be4 SITL: Parameters for steering/throttle rover 2020-02-13 09:04:32 +11:00
ashvath 677dec5894 SITL: example for steering/throttle rover 2020-02-13 09:04:32 +11:00
ashvath 71f8c7cabb SITL: support for steering/throttle rover 2020-02-13 09:04:32 +11:00
Peter Barker adcfb60850 AP_RangeFinder: comment out no-loner-used PX4 enum entry 2020-02-12 21:18:47 +11:00
Peter Barker 6febbcdc13 AP_RangeFinder: remove incorrect and misleading comment 
Wrong on several counts.  detect calls this method.  The constructor
doesn't initialise the rangefinder.  detect doesn't return boolean.
 2020-02-12 21:18:47 +11:00
Andrew Tridgell bebfef369f HAL_ChibiOS: fixed power flags for CUAV-Nora 2020-02-12 21:17:49 +11:00
CUAVcaijie 561808ba3c HAL_ChibiOS: Added support for CUAV Nora flight controller 2020-02-12 21:17:49 +11:00
Andrew Tridgell a0fe1a7598 HAL_ChibiOS: produce more accurate clocks for DShot and PWM 2020-02-12 18:12:39 +11:00
Andrew Tridgell 9e0edba31d HAL_ChibiOS: raised timer clocks to 200MHz 
this gives more flexibility in setting up timers for DShot
 2020-02-12 18:12:39 +11:00
Andrew Tridgell 8b93e0f57d HAL_ChibiOS: prevent double init of USB 
this prevented init of USB CubeBlack on Windows. Thanks to Randy for
reporting
 2020-02-12 17:44:09 +11:00
Andrew Tridgell adf17414e0 HAL_ChibiOS: fixed output string for non-DMA capable chan 
this fixes a problem where the user requests DShot (which rquired DMA)
on an output channel which cannot allocate a DMA channel. We end up
sending normal PWM, so the string representation of the output modes
should reflect that
 2020-02-12 14:08:40 +11:00
Randy Mackay 1d8e4ce5ac AP_ToshibaCAN: move usage_sec in telemetry struct 
According to WickedShell this saves 48bytes of RAM
 2020-02-12 11:58:34 +09:00
Randy Mackay 8c227a5a18 AP_Scripting: add esc-usage.lua 
example script to retrieve esc usage time
 2020-02-12 11:58:34 +09:00
Randy Mackay fb2d7242f4 AP_Scripting: make bindings 2020-02-12 11:58:34 +09:00
Randy Mackay 617b8b45d2 AP_Scripting: add AP_ESC_Telem bindings 2020-02-12 11:58:34 +09:00
Randy Mackay 72612d3cb9 AP_Vehicle: add AP_ESC_Telem 2020-02-12 11:58:34 +09:00
Randy Mackay 35737d484e AP_ESC_Telem: wrapper for ESCs with feedback 2020-02-12 11:58:34 +09:00
Randy Mackay 415ba0f40d AP_ToshibaCAN: add accessors for use by scripts 2020-02-12 11:58:34 +09:00
Randy Mackay 2bc91cbc4d AP_ToshibaCAN: request usage time from ESC 2020-02-12 11:58:34 +09:00
Randy Mackay 9fd315f061 AP_ToshibaCAN: add get_motor_request_data_cmd helper function 2020-02-12 11:58:34 +09:00
Andrew Tridgell e8ab35a192 HAL_ChibiOS: fixed stdout in early startup bug 
this caused a failure to boot on some boards if they tried to print
messages in early startup code before hal was initialised

thanks to @Shadowru for reporting the issue
 2020-02-12 13:51:10 +11:00
Peter Hall b1742b4e19 GCS_Mavlink: constrain battery current to avoid wrap 2020-02-12 08:04:39 +11:00
Peter Hall 2bd6d4674b AP_HAL: utility: add thread safe ring buffer duplicate 2020-02-12 07:05:05 +11:00
Peter Hall 1ee14ffa75 AP_Param: use thread safe object buffer 2020-02-12 07:05:05 +11:00
Patrick José Pereira a183d00b7e AP_RangeFinder: BLPing: Rework class to work with new firmware version 3.28 
- Uses the continuous message request

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-02-11 11:49:11 -05:00
Andrew Tridgell f7eba43cb8 GCS_MAVLink: raise ftp stack size to 3072 from 1024 
this prevents memory corruption on directory listing
 2020-02-11 13:32:17 +11:00
Randy Mackay d40862de9c AP_ServoRelayEvents: do-set-servo affects sprayer and gripper 2020-02-11 11:08:02 +11:00
Randy Mackay e0af13a6ad SRV_Channel: remove release and choke from FUNCTION param description 
release (aka eggdrop) was 11
choke was 68
 2020-02-11 11:08:02 +11:00
Matt Lawrence e6f32f4572 AP_HAL_ChibiOS: Fix waf --default-parameters 
If a defaults.parm file was present in the hwdef, waf ignored the --default-parameters=xyz.parm command line argument.  This will allow it to use that command line argument specified file.
 2020-02-11 11:00:01 +11:00
Peter Barker 73e51c480a RC_Channel: correct RC_set_override parameter name 
This was just misnamed.  All callers appear to be passing ms in.
 2020-02-10 13:46:33 -07:00
Peter Barker 0cf747cdbe SITL: remove RCMAP_ parameters from SilentWings parameters 
These files contain a lot of values which happen to be the defaults.
These are some of them.
 2020-02-10 13:55:05 +11:00
Peter Barker bea8765da7 AP_AdvancedFailsafe: remove unused RCMAP includes 2020-02-10 13:55:05 +11:00
Peter Barker aa356b563d SRV_Channel: remove unused RCMAP includes 2020-02-10 13:55:05 +11:00
yaapu b606c0df64 AP_Frsky_Telem: added VSpd to telemetry protocol 4 
The Frsky vario "virtual" sensor was reporting altitude but not vertical speed.
This patch adds VSpd as a new sensor when protocol 4 is selected.
GPS frsky sensor is migrated to 2 byte sensor ID and needs rediscovery if using the previous 1 byte version
 2020-02-09 20:52:58 +11:00
Andrew Tridgell 12f31e328f HAL_ChibiOS: fixed dshot docs for Pixhawk4 2020-02-08 14:15:37 +11:00
Randy Mackay 76c982ced8 AP_HAL_CHibiOS: update Pixhawk4 README to 16 pwm outputs 
also correct Main PWM ouput's number of groups
 2020-02-08 14:14:32 +11:00
Peter Barker df614cc34f AP_HAL_SITL: print valid model names if none supplied 2020-02-07 15:03:05 +11:00
Andrew Tridgell 521cf4d6a1 AP_Compass: removed annoying startup messages 
these happen due to sensor probing for older configs
 2020-02-06 15:25:46 -07:00
Andre Kjellstrup a2322a828c AP_Battmonitor_SMBus_Solo: removed unused code/options 2020-02-06 15:04:18 -07:00
Peter Barker de2cf89b60 AP_Vehicle: initialise scheduler early 
So the loop rate gets clamped before we memoise it and the loop period
in AP_Scheduler
 2020-02-06 14:41:06 +11:00
Peter Barker 5580196b1c AP_Scheduler: move clamping of loop rate to init function 
Parameters may not be available in the constructor, and that's what we
need to be clamping.
 2020-02-06 14:41:06 +11:00
Peter Barker a523bb4b68 AP_Vehicle: let AP_Vehicle handle loop() 2020-02-06 14:41:06 +11:00
Peter Barker 51a1ee83a6 AP_HAL_SITL: correct name on stacktrace files 
We write these files out for many more things than just segfaults
 2020-02-06 13:48:11 +11:00
Pierre Kancir f1f784f81d AP_TemperatureSensor: fix TSYS01 warning on SITL 2020-02-05 17:10:58 -05:00
Tatsuya Yamaguchi 5688031f02 AC_Fence: add the description of FENCE_ACTION in Rover 2020-02-05 14:58:56 +09:00
Tatsuya Yamaguchi 0b8ad28272 SRV_Channel: add sprayer and camera aperture output 2020-02-05 14:44:07 +09:00
Willian Galvani 4afdff746e AP_HAL: Fix Navigator orientation 
The Rev2 prototype board had the IMU rotated
 2020-02-04 22:47:16 -05:00
Andrew Tridgell bdef7d7158 HAL_ChibiOS: fixed default fast sampling on CubeOrange and Durandal 2020-02-05 12:48:51 +11:00
Andrew Tridgell e0cd790505 HAL_ChibiOS: fixed spektrum RC input on Pixracer 
RCININT is inverted compared to RCIN, so need to enable SBUS_INV pin
 2020-02-05 10:45:36 +11:00
Peter Barker ab7ee46423 AP_InertialSensor: mark some parameters as Calibration parameters 2020-02-04 20:29:09 +11:00
Peter Barker cc3f6468e3 AP_Compass: mark some parameters as Calibration parameters 2020-02-04 20:29:09 +11:00
Peter Hall 556d90ca0c AC_Avoidance: keep track of velocity liminting status 2020-02-04 10:24:33 +09:00
Peter Hall ba811052f8 GCS_Mavlink: report on fence limiting 2020-02-04 10:24:33 +09:00
Randy Mackay 7a5f57f940 GCS_MAVLink: send rc output mode banner to GCS 2020-02-04 12:23:33 +11:00
Randy Mackay a71ae54d3a AP_HAL: add RCOutput::get_output_mode_banner 2020-02-04 12:23:33 +11:00
chobits a54f24c8c0 AP_NavEKF2: switch to optflow if gps is jammed 2020-02-04 10:13:57 +09:00
Michael Dornisch 455bd86f1a AP_Notify: Created NTF_NEO_LEN to change length of Neopixel strings 2020-02-04 11:48:52 +11:00
Peter Hall 2c5b0ffa29 AP_BlHeli: always report test results and report band channel once 2020-02-04 10:38:20 +11:00
Peter Hall d5843ff03a AP_BLHeli: stop motors if conection lost in motor test 2020-02-04 10:38:20 +11:00
Peter Hall 38f68c4eba AP_Blheli: allow connection with mixed reversible and normal 2020-02-04 10:38:20 +11:00
Randy Mackay 176e8b8861 AP_OpticalFlow: add orient-yaw parameter units 2020-02-03 19:35:40 +09:00
Randy Mackay 7d8952a48a AP_RangeFinder: fix offset param for PWM driver 2020-02-03 19:32:34 +09:00
giacomo892 529f067914 HAL_ChibiOS: save more flash on SuccexF4 2020-02-02 06:02:59 +11:00
giacomo892 23a42b1914 HAL_ChibiOS: disable parachute and sprayer on SuccexF4 2020-02-02 06:02:59 +11:00
Randy Mackay 52ca1e016e AP_RangeFinder: minor fix in POS param description 2020-02-01 08:46:03 +09:00
Randy Mackay 6677c807ae AP_WheelEncoder: add POS param range of 5m 2020-02-01 08:46:03 +09:00
Randy Mackay c9b82aa822 AP_VisualOdom: POS param range of 5m and 1cm increment 2020-02-01 08:46:03 +09:00
Randy Mackay 9f3154372d AP_RangeFinder: POS param range of 5m and 1cm increment 2020-02-01 08:46:03 +09:00
Randy Mackay dd49f199cb AP_OpticalFlow: reduce POS param range to 5m and add increment 2020-02-01 08:46:03 +09:00
Randy Mackay b7f6f4a05e AP_InertialSensor: reduce POS param range to 5m and add increment 2020-02-01 08:46:03 +09:00
Randy Mackay b31a9fd54a AC_PrecLand: POS param range of 5m and 1cm increment 2020-02-01 08:46:03 +09:00
Randy Mackay a19634b9d2 AP_GPS: reduce POS param range to 5m and add increment 2020-02-01 08:46:03 +09:00
Andrew Tridgell 8b2629bfc1 HAL_ChibiOS: save 7k flash for boards close to flash limit 2020-02-01 06:58:43 +11:00
Andrew Tridgell aa3642d9de AP_Param: save 7k flash for HAL_MINIMIZE_FEATURES boards 2020-02-01 06:58:43 +11:00
Leonard Hall 152205fd52 AC_AutoTune: fix restoring of original gains 
current_gain_type was not being set when load_gains was called meaning subsequent calls to load_gains would fail if gain_type was GAIN_ORIGINAL
 2020-01-31 19:40:21 +09:00
murata 58c823acc1 SRV_Channel: Change from direct value to defined value 2020-01-31 11:34:08 +11:00
Andrew Tridgell c8395bb2c1 HAL_ChibiOS: use blocking semaphore for new_input() 
this prevents a race where we continually fail to get new input
 2020-01-31 11:09:07 +11:00
Andrew Tridgell 05f095f338 HAL_ChibiOS: fixed build 2020-01-31 11:09:07 +11:00
Andrew Tridgell 3fe3c8ecdc HAL_ChibiOS: implement pulse_input_enable() 
and cleanup use of mutexes in RC input
 2020-01-31 11:09:07 +11:00
Andrew Tridgell 9c0cf0871b HAL_ChibiOS: added disable() API for pulse input 2020-01-31 11:09:07 +11:00
Andrew Tridgell 258b8b71ea AP_IOMCU: use more efficient read API for rcin 2020-01-31 11:09:07 +11:00
Andrew Tridgell 8e67c3459a AP_RCProtocol: added multi-channel read() API 
and use pulse_input_enable() to disable pulse input when not needed
 2020-01-31 11:09:07 +11:00
Andrew Tridgell 3105c6a050 AP_HAL: added pulse_input_enable() API 
this allows disabling pulse input at runtime to lower CPU load on
IOMCU when decoding via a UART
 2020-01-31 11:09:07 +11:00
Andrew Tridgell ae9e8c3dbc HAL_SITL: fixed bitmask error on storage erase 2020-01-31 11:06:29 +11:00
Andrew Tridgell cbbf61af93 HAL_Linux: fixed bitmask error on storage erase 2020-01-31 11:06:29 +11:00
Andrew Tridgell 27c114828b HAL_ChibiOS: fixed bitmask error on storage erase 2020-01-31 11:06:29 +11:00
Peter Barker bff97eb150 AP_HAL_ChibiOS: assert that storage size is an even number of storage-lines 2020-01-30 19:53:02 +11:00
Peter Barker c4ed6d0e96 AP_Motors: ensure _pwm_min and _pwm_max are not equal 
AP_Motors: adjust check_mot_pwm_params for clarity
 2020-01-30 14:49:16 +09:00
Randy Mackay bff978570f AP_MotorsMulticopter: fixup check_mot_pwm_params 
fix _pwm_max is positive check
returns true if params are valid
constify method
 2020-01-30 10:01:54 +09:00
Randy Mackay f00bf77af7 AP_MotorsMulticopter: minor formatting fix 2020-01-30 08:33:00 +09:00
ashvath d97fdcac31 Copter: function for mot_pwm checks 2020-01-30 08:29:56 +09:00
Rishabh ded7c422f7 HAL_SITL: support new motor orders 2020-01-29 16:57:23 +09:00
Rishabh dc662a56b2 SITL: Added DJI Hexa and Octa for SITL 2020-01-29 16:57:23 +09:00
Rishabh 38533b2f09 AP_Motors: Added DJI_X motor setup for hexacopter and octacopter 2020-01-29 16:57:23 +09:00
Randy Mackay 84e6c59fdd AC_AttitudeControlHeli: fix update_althold_lean_angle_max use of throttle_in 2020-01-29 10:59:28 +09:00
Randy Mackay 3c8aa955d5 AC_AttitudeControlSub: fix update_althold_lean_angle_max use of throttle_in 2020-01-29 10:59:27 +09:00
Leonardo Felipe L. S. dos Santos 07f45e1ef9 AC_AttitudeControlMulti: fix update_althold_lean_angle_max use of 
throttle_in
 2020-01-29 10:58:56 +09:00
Peter Barker 623c84ae74 AP_HAL_SITL: implement trap method 2020-01-29 10:27:01 +11:00
Peter Barker 1344827c07 AP_HAL: add empty overridable trap method 2020-01-29 10:27:01 +11:00
Peter Barker 1650979a2b GCS_MAVLink: add support for MAV_CMD_DEBUG_TRAP 2020-01-29 10:27:01 +11:00
Andrew Tridgell 0e7ddebd15 GCS_MAVLink: fix for updated mavlink extensions 2020-01-29 08:16:59 +11:00
Andrew Tridgell 0a9a1c5314 AP_EFI: fix for updated mavlink extensions 2020-01-29 08:16:59 +11:00
Peter Barker e248bdfb16 GCS_MAVLink: split statustexts into 50-byte chunks using mav2 extensions 2020-01-28 19:56:38 +11:00
Peter Barker a1f0452940 AP_Hott_Telem: avoid 1-byte overwrite in prearm check string 
In file included from /usr/include/string.h:494:0,
                 from ../../libraries/AP_HAL/AP_HAL_Namespace.h:3,
                 from ../../libraries/AP_HAL/AP_HAL.h:5,
                 from ../../libraries/AP_Hott_Telem/AP_Hott_Telem.h:17,
                 from ../../libraries/AP_Hott_Telem/AP_Hott_Telem.cpp:23:
In function ‘char* strncpy(char*, const char*, size_t)’,
    inlined from ‘void AP_Hott_Telem::send_Vario()’ at ../../libraries/AP_Hott_Telem/AP_Hott_Telem.cpp:366:20:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:71: warning: ‘char* __builtin___strncpy_chk(char*, const char*, long unsigned int, long unsigned int)’: specified bound 8 exceeds the size 7 of the destination [-Wstringop-overflow=]
   return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
                                                                       ^
In function ‘char* strncpy(char*, const char*, size_t)’,
    inlined from ‘void AP_Hott_Telem::send_Vario()’ at ../../libraries/AP_Hott_Telem/AP_Hott_Telem.cpp:368:20:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:106:71: warning: ‘char* __builtin___strncpy_chk(char*, const char*, long unsigned int, long unsigned int)’: specified bound 8 exceeds the size 7 of the destination [-Wstringop-overflow=]
   return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
 2020-01-28 17:06:29 +11:00
Andrew Tridgell b47181a86f AP_OpticalFlow: probe all I2C buses for px4flow on Hex Cubes 2020-01-28 14:54:30 +09:00
Peter Barker 07c7a98269 AP_Vehicle: move some common init_ardupilot code up to AP_Vehicle 2020-01-28 11:34:51 +11:00
Peter Barker 1211ea88b5 AP_Vehicle: move setup method up to AP_Vehicle base class 2020-01-28 11:34:51 +11:00
Peter Barker 4647c6ef62 StorageManager: use pragmas to set storage layout rather than call 
We don't need the flexibility to reset this, it's a waste of bytes and
something that could go wrong.  AP_Periph led the way with using
pragmas here.
 2020-01-28 11:34:51 +11:00
Michael du Breuil 7bc1f4ff9b AP_RangeFinder: a to close reading is not the minimum distance 2020-01-28 11:32:19 +11:00
Peter Barker 8b20c82a18 AP_Camera: send mavlink camera feedback message even if no logger 2020-01-27 17:03:06 -07:00
Peter Hall de684530f1 SRV_Channel: add wing sail elevator output 2020-01-28 08:26:41 +09:00
Rob Ratcliff 5c388507d4 RC_Channel: fix handling of rc_override_time of -1 2020-01-27 19:21:54 +09:00
Andrew Tridgell dd1426cf73 HAL_SITL: allow for separate position for 2nd GPS 
makes for better simulation of moving baseline
 2020-01-26 16:55:17 +11:00
Andrew Tridgell fb3496b63b SITL: added SIM_GPS2_POS 
and re-arrange two sets of GPS parameters to be arrays
 2020-01-26 16:55:17 +11:00
Jaaaky e8df08a4d3 AP_Terrain: Avoid update() IO operations when not enabled 2020-01-26 10:35:29 +11:00
Andrew Tridgell a7b6887f44 HAL_ChibiOS: added a f303-Universal build target 2020-01-26 09:12:55 +11:00
Andrew Tridgell 2fa6f534ab AP_RangeFinder: added get_type() API 2020-01-26 09:12:55 +11:00
Andrew Tridgell 7efd5248ee AP_GPS: added get_type() API 2020-01-26 09:12:55 +11:00
Andrew Tridgell 7a812a5516 HAL_ChibiOS: use cortex m7 instructions on F7/H7 2020-01-25 08:50:09 +11:00
murata b0af48745e AP_RangeFinder: VL53L1X LONG can be specified 
AP_RangeFinder: VL53L1X LONG can be specified

AP_RangeFinder: Add VL53L1X to device number 16

AP_RangeFinder: Add VL53L1X to device number 16
 2020-01-24 13:46:35 -07:00
Andrew Tridgell e59f32074d AP_GPS: fixed yaw error when one GPS has zero position 
the M_PI correction was only valid for one zero side. Much simpler to
always calculate difference
 2020-01-24 11:46:40 +11:00
Randy Mackay 141099078c AP_RangeFinder: increase leddarvu8 timeout to 0.5sec 2020-01-23 16:24:33 +11:00
Randy Mackay f269004610 AP_RangeFinder: fix detect for LeddarVu8 
Co-Authored-By: Peter Barker <pb-gh@barker.dropbear.id.au>
 2020-01-23 16:24:33 +11:00
Randy Mackay b068f15932 AP_RangeFinder: LeddarVu8 driver 2020-01-23 16:24:33 +11:00
Randy Mackay e5c3a7f7b5 AP_RangeFinder: typo fix for LeddarOne 2020-01-23 16:24:33 +11:00
Randy Mackay 266a908b83 AP_RangeFinder: serial backend get_reading returns false 2020-01-23 16:24:33 +11:00
Randy Mackay 9ac10c3af9 AP_RangeFinder: remove virtual from _get_mav_distance_sensor_type 2020-01-23 16:24:33 +11:00
Rajat Singhal 6bbf6f380f SITL: Add rover support for Airsim 2020-01-23 15:12:50 +11:00
murata f6595a41ae AP_Logger: Change the type of a method 2020-01-22 12:45:27 +11:00
yaapu 88f0d54574 AP_RCProtocol: fport downlink packet: fixed CRC and added missing PACKED attribute 2020-01-22 06:58:29 +11:00
Matt Lawrence 5d3ed74a37 AP_Notify: Remove pixhawk from Oreo LED comments 
Removes specific reference to pixhawk from comments since not all flight controllers are pixhawks.
 2020-01-21 13:48:54 +09:00
Matt Lawrence 3af99115fb AP_Notify: Add GCS failsafe notify tones and lights 2020-01-21 13:48:54 +09:00
Randy Mackay b9ff846162 AC_AttitudeControl: remove old RAT_FILT param desc 2020-01-21 13:06:56 +09:00
Randy Mackay 2f568bbfcb AC_AutoTune: fix backup of yaw acceleration 2020-01-21 11:04:22 +09:00
Bill Geyer 7ee4054515 AC_AttitudeControl: tradheli-Remove Param descriptions 
This remove the old filter param description from AC 3.6 and adds the new filter param descriptions.
 2020-01-21 11:02:38 +09:00
Peter Barker 583b25e6aa AP_AHRS: allow NavEKFs to be compiled out 2020-01-21 11:53:18 +11:00
Peter Barker 73c32f403b AP_HAL_ChibiOS: do not compile EKF2 for MatekF405-Wing 2020-01-21 11:53:18 +11:00
Peter Barker 8fc64ccbe9 GCS_MAVLink: allow NavEKFs to be compiled out 2020-01-21 11:53:18 +11:00
Peter Barker b30004c0a2 AP_SmartRTL: EKF objects have moved into AP_AHRS_NavEKF 2020-01-21 11:53:18 +11:00
Peter Barker a4d9673f39 AP_OpticalFlow: EKF objects have moved into AP_AHRS_NavEKF 2020-01-21 11:53:18 +11:00
Peter Barker e6150533fc AP_NMEA_Output: EKF objects have moved into AP_AHRS_NavEKF 2020-01-21 11:53:18 +11:00
Peter Barker 373b8be7ef AP_Vehicle: move EKF objects into AP_AHRS_NavEKF 2020-01-21 11:53:18 +11:00
Peter Barker e289020332 AP_NavEKF3: stop taking ahrs in constructor 2020-01-21 11:53:18 +11:00
Peter Barker da3d3cc21b AP_NavEKF: stop taking ahrs in constructor 2020-01-21 11:53:18 +11:00
Peter Barker 14fce28e1b AP_AHRS: move EKF objects in; this requires unconsting some methods 2020-01-21 11:53:18 +11:00
Peter Barker d6dbdd58d3 AC_AttitudeControl: adjust for some methods on AP_AHRS become non-const 2020-01-21 11:53:18 +11:00
Peter Barker 8f550ffdd4 AP_Vehicle: change string to Initialising ArduPilot 2020-01-21 11:37:28 +11:00
Peter Barker 342e502da4 AP_vehicle: let AP_Vehicle base class worry about scheduler delay callback 2020-01-21 11:37:28 +11:00
Peter Barker 9ef23872e0 AP_HAL_SITL: check result code of pthread_attr_init 2020-01-21 11:22:20 +11:00
Peter Hall d5729236e2 AP_Scripting: update plane-wind-fs battery RTL failsafe example 2020-01-21 10:12:45 +11:00
Peter Hall d08b395224 AP_Motors: only ouput throttle to mask if armed 2020-01-21 10:11:16 +11:00
Peter Barker e189b17efb AP_HAL_ChibiOS: remove unused AnalogIn fields 2020-01-21 10:06:18 +11:00
Andrew Tridgell a8501a91c7 HAL_ChibiOS: fixed handling of write mutex 
this fixes an issue with log download on USB and mavlink throughput
caused lock contention. The issue was introduced with the changes for
unbuffered writes recently (does not affect stable releases)
 2020-01-21 08:37:25 +11:00
Andrew Tridgell 87a51899bd SRV_Channel: update SERVO_AUTO_TRIM docs 2020-01-20 06:50:36 +11:00
Andrew Tridgell a153799e26 HAL_Linux: support inverted 115200 protocols 
this allows for FrSky FPort input
 2020-01-19 21:10:00 +11:00
Andrew Tridgell 82d77fe014 AP_UAVCAN: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell e7f200f623 AP_Stats: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 9d63edbf37 AP_RTC: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 17a762fd36 AP_Notify: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 5ae6ad2a59 AP_Mission: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 71a0645a59 AP_Logger: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 58708c483f AP_InertialSensor: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 4aa78dc891 AP_HAL_SITL: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 4b9442dad7 AP_HAL_Linux: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell f683741a9c AP_HAL: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 982cff0695 AP_HAL_ChibiOS: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell cf8becfa71 AP_GPS: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 23b3000e3a AP_Filesystem: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 0ca45059ac AP_Compass: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 322bad3fd9 AP_Baro: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 3bb7c0e937 AP_Avoidance: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 1fac578b37 AP_Airspeed: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 3b95b5e692 AP_AHRS: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 48486d259f AC_Avoidance: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 7bc364a338 AP_TemperatureSensor: use take_blocking instead of HAL_SEMAPHORE_BLOCK_FOREVER 
this makes for cleaner and smaller code as the failure case is not
needed
 2020-01-19 20:19:30 +11:00
Andrew Tridgell 7dcb5c60b0 AP_RangeFinder: use take_blocking instead of HAL_SEMAPHORE_BLOCK_FOREVER 
this makes for cleaner and smaller code as the failure case is not
needed
 2020-01-19 20:19:30 +11:00