The only exception is for binaries that go in 'bin', like vehicles.
That way, partial builds follow the rule:
- If building a vehicle or some helper that goes into 'bin', just use the
binary name as the argument for --target. Example: `waf --target
ArduCopter`.
- For other binaries, the name of the directory they are placed in must be
used. Example: `waf --target tests/test_vectors`.
That param defines where the binary will be saved in the build directory,
namely `build/<board>/<blddestdir>`. The default is 'bin', for binaries that are
to be shipped for installation.
This shrink must be used when the output camera sizes doesn't fit
the expected output.
We don't need to crop it even when the camera sizes aren't squared since
the shrink_8bpp() function shrinks a selected area.
This function shrinks a selected area on a 8bpp image.
The focus in this function was the performance, so this may not be the
clearer or the most understandable way to write it. The performance
was measured using GoogleBenchmark[1].
[1] - https://github.com/google/benchmark.git
Support for perf api using lttng.
Some additional build tricks needed for bebop because lttng uses dl_open
which is not compatible with a static link on a different libc as used
on the bebop
The configure function was reorganized for:
- removing variables that are not used
- making it more general, i.e., not relying in ardupilotmega.xml, so that this
tool can be used for generating other headers in the future
The option target for the waf task generator is meant for actual files that are
going to be build. Since our target files are dynamic, let's change the code to
use a new parameter output_dir instead.
The task generator for the mavlink headers is given a name 'mavlink' and is
added as a dependency to all local static libraries, because all of them use
sources that include mavlink headers. It would be nice to have a good way to
detect sources that use mavlink headers or to declare list of libraries that
use the headers, so that the dependency could be added automatically.
Additionally, there's a minor change in syntax for the task generator: using
strings directly instead of lists.
By setting env.env during configure time makes changes be for the whole build
system scope and persistently, which may cause problems for other tasks and
tools.
Since the output list for mavgen is dynamic, in the sense that we don't have
the information of what files will be generated by the task, that is not
captured by default by waf and post_run can't save the task signature for those
files. Although that doesn't cause build errors, the build time increase
significantly for when tasks that use the generate files are included (for
example, vehicles builds).
This patch search for the headers that were created by the task and set the
task signature for them. Using ant_glob isn't a very good solution, since there
may be stray file in the local build directory, but let's use that for now
until we find a better approach.
Set MAV_SYS_STATUS_SENSOR_VISION_POSITION bit in onboard_control_sensors_present, onboard_control_sensors_enabled and onboard_control_sensors_health based on the status of precision landing sensor.
Sensor bias corrections were being applied to the incoming IMU data using the wrong delta time.
This was what was driving the different tuning between plane and copter for gyro bias process noise so the same gyro bias process noise default tuning value can now be used for all platform types.
Sensor bias corrections were being applied a a second time to the output observer inertial data.
Eliminate the use of horizontal position states during non-aiding operation to make it easier to tune.
Explicitly set the horizontal position associated Kalman gains to zero and the coresponding covariance entries to zero after avery fusion operation.
Make the horizontal velocity observation noise used during non-aiding operation adjustable.
Use a fixed value of velocity noise during initial alignment so that the flight peformance can be tuned without affecting the initial alignment.
There is an issue with gbenchmark and waf on Ubuntu (15.04 and 15.10, ). Waf doesn't link pthread to gbenchmark and linking failed :
````
[1652/1652] Linking build/linux/libraries/AP_Math/benchmarks/benchmark_matrix.linux
/home/khancyr/Workspace/APM/ardupilot/build/linux/gbenchmark/lib/libbenchmark.a(benchmark.cc.o): dans la fonction « benchmark::RunSpecifiedBenchmarks(benchmark::BenchmarkReporter*) »:
benchmark.cc:(.text+0x2e21): référence indéfinie vers « pthread_create »
/usr/bin/ld generated: référence indéfinie vers « pthread_create »
collect2: error: ld returned 1 exit status
Waf: Leaving directory `/home/khancyr/Workspace/APM/ardupilot/build/linux'
Build failed
-> task in 'benchmark_matrix.linux' failed (exit status 1):
{task 139784788162576: cxxprogram benchmark_matrix.cpp.1.o -> benchmark_matrix.linux}
['/usr/lib/ccache/g++', '-Wl,--gc-sections', 'libraries/AP_Math/benchmarks/benchmark_matrix.cpp.1.o', '-o', '/home/khancyr/Workspace/APM/ardupilot/build/linux/libraries/AP_Math/benchmarks/benchmark_matrix.linux', '-Wl,-Bstatic', '-L.', '-lap', '-Wl,-Bdynamic', '-L/home/khancyr/Workspace/APM/ardupilot/build/linux/gbenchmark/lib', '-lm', '-lpthread', '-lrt', '-lbenchmark']
`````
Adding 'pthread' to env.LIB_GBENCHMARK solve the issue
see https://github.com/diydrones/ardupilot/pull/3460 and https://github.com/diydrones/ardupilot/issues/3461
Gustavo Jose de Sousa
Ricardo de Almeida Gonzaga
Julien BERAUD
Andrew Tridgell
Lucas De Marchi
Aaron Wang Shi
pkancir
bugobliterator
Randy Mackay
Jonathan Challinger
Derek Ma
Paul Riseborough
khancyr
Linus
squilter