Commit Graph

196 Commits

Author SHA1 Message Date
Andrew Tridgell 600a5c44d2 Plane: allow changing of target altitude in GUIDED 2017-09-09 08:14:09 +10:00
Andrew Tridgell bc17c26dbf Plane: limit pitch in transition to QLOITER and QLAND
when switching to QLOITER or QLAND when in forward flight, limit the
maximum pitch to prevent a sudden decelleration
2017-09-09 08:14:09 +10:00
Andrew Tridgell b6809655d4 Plane: smooth the transition to LAND_FINAL in quadplanes
this makes for a much smoother change to LAND_FINAL, without a jerk as
it changes vertical speed
2017-09-09 08:14:09 +10:00
Andrew Tridgell 8411ac5c57 Plane: fixed a problem with descent rate in landings for quadplanes
use xy controller instead of xyz controller, which prevents calling z
controller twice, which led to poor height control
2017-09-09 08:14:09 +10:00
Andrew Tridgell baee71a5b4 Plane: added GUIDED takeoff for quadplanes
this allows takeoff in GUIDED mode in the same way as copters
2017-09-09 08:14:09 +10:00
Andrew Tridgell a88e663191 Plane: adjust target altitude slowly in QRTL mode
this fixes a sudden throttle drop when starting the descent in QRTL mode
thanks to Marco for finding this issue
2017-09-07 07:22:13 +10:00
Andrew Tridgell 909f109b3f Plane: don't start a transition while disarmed
this can caused flooding of the GCS console while disarmed in FBWA
mode
2017-07-30 12:39:36 -07:00
Peter Barker c058fba5ac Plane: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 5a8f01c19c Plane: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
Pierre Kancir 5d0972f589 Arduplane: fix implicit cast to double warning in quadplane 2017-06-14 12:40:47 +01:00
Andrew Tridgell 1455c23230 Plane: fixed docs for tailsitter 2017-06-10 18:41:34 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 2f5f8eb323 Plane: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Andrew Tridgell 6eaad59115 Plane: improve vectored tailsitter takeoff
this gives extra pitch input when taking off a vectored tailsitter,
allowing the motors to point straight up for easy takeoff

thanks to Leonard for the idea!
2017-05-07 09:10:44 +10:00
Andrew Tridgell 7ea0f65590 Plane: removed incorrect comment 2017-04-24 16:56:23 +10:00
Andrew Tridgell 06b0742481 Plane: fixed jump in qhover on takeoff
Z controller PID is from -1 to 1

thanks to Leonard for spotting this
2017-04-24 16:55:41 +10:00
Andrew Tridgell aab20317a0 Plane: fixed position control in QLAND_FINAL 2017-04-24 16:55:41 +10:00
Andrew Tridgell b1f1ace736 Plane: support vectored yaw tiltrotors
this adds support for tiltrotors which control yaw by vectoring the
forward motors. This avoids the need for the rear motor on a
tilt-tricopter to have a tilt servo
2017-04-24 16:54:41 +10:00
Andrew Tridgell 2d9c3e3d93 Plane: added EKF yaw reset handling to quadplane
this follows the implementation from copter. Thanks to Leonard for the
suggestion
2017-04-24 16:52:16 +10:00
Andrew Tridgell 88e02c7b35 Plane: log the throttle mix for quadplane copter control 2017-04-19 09:08:43 +10:00
Andrew Tridgell d5ec7b0aad Plane: fixed a sign error in the angle assist code
thanks to Leonard for finding this!
2017-04-18 22:09:22 +10:00
Andrew Tridgell b15b11e32d Plane: always stabilize with tailsitters 2017-04-14 12:48:08 +10:00
Andrew Tridgell 46d910539c Plane: fixed a warning 2017-04-11 17:34:40 +10:00
Andrew Tridgell 642a6acfcb Plane: support thrust vectoring in tailsitters
adds Q_TAILSIT_VHGAIN and Q_TAILSIT_VFGAIN, allowing for thust
vectoring in both fixed wing and hover
2017-04-11 17:34:40 +10:00
Andrew Tridgell 664e41cec6 Plane: bring in demanded climb rate over 1 second
when we engage the Z controller in quadplane we bring in the climb
rate slowly to prevent a sudden change in motor demand
2017-04-09 16:45:19 +10:00
Andrew Tridgell 0cf571d338 Plane: moved Z altitude target reset
reset alt target whenever we have not run Z controller for 2s
2017-04-09 16:45:19 +10:00
Mark Whitehorn 7679b758b0 Plane: add parameter RUDD_DT_GAIN for dual motor tailsitter
controls rudder to differential thrust mixing in FW mode
2017-04-06 08:29:44 +10:00
Andrew Tridgell acaef22416 Plane: improve transition from QSTABILIZE to FBWA or QHOVER 2017-04-05 20:00:29 +10:00
Andrew Tridgell 36d8f730e1 Plane: setup better defaults for tailsitters 2017-04-04 10:15:08 +10:00
Andrew Tridgell 5d06e4238f Plane: make the quadplane motors var_info dynamic
this will allow for more quadplane motors class types
2017-03-25 16:22:10 +11:00
Andrew Tridgell af97a3974b Plane: initialise target height correctly on quadplane transition
this fixes a bug where a plane in QSTABILIZE would drop suddenly if
switched to FBWA when the target altitude had not been initialised
2017-03-22 21:34:40 +11:00
Andrew Tridgell bb158a437e Plane: handle bad Q_FRAME_CLASS
default to quad with a warning. This prevents users getting stuck
without being able to set Q_ENABLE=1

thanks to Leonard for noticing
2017-03-18 22:10:20 +11:00
Andrew Tridgell 3f7e7d456f Plane: in fixed wing mode slave quadplane attitude rate controller
For quadplanes this uses the attitude controller from fixed wing
when using the multicopter controller to assist fixed wing
flight. This prevents a rate mismatch between the two controller
leading to oscillation
2017-03-14 14:42:20 +11:00
Andrew Tridgell 2db8589f49 Plane: smarter Z controller initialisation for quadplanes
this is more generic than the previous one used only for the full
position controller
2017-03-14 14:42:20 +11:00
Andrew Tridgell 4ff5bf5af5 Plane: zero integrators and set throttle mix
this zeros fixed wing integrators during TRANSITION_AIRSPEED_WAIT and
uses a zero throttle mix during TRANSITION_TIMER. This should allow
the fixed wing controller more time to adapt to forward flight
2017-02-26 09:20:51 +11:00
Andrew Tridgell c061d5615b Plane: added manual input mask for tailsitter prop-hang
This adds new parameters Q_TAILSIT_MASK and Q_TAILSIT_MASKCH. These
parameters allow a user to use the tailsitter capabilities of a 3D
plane to teach themselves to prop-hang.

It works by allowing the user to setup a switch on their transmitter
to enable manual pass-thru of a set of the input channels to outputs
when in tailsitter hover. The user can then use that switch to allow
learning of hover control in a 3D plane one channel (or two channels)
at a time.
2017-02-26 09:20:13 +11:00
Andrew Tridgell 3bb25eb194 Plane: added Q_TAILSIT_INPUT
this allows the user to control tailsitters either in body frame (like
a plane) or in earth frame (like a multicopter). This is useful for
people wanting to learn to fly prop-hang on 3D planes
2017-02-26 09:20:13 +11:00
Andrew Tridgell ea5186340b Plane: added Q_TILT_RATE_UP and Q_TILT_RATE_DN as separate parameters
allow control of tilt rate separately for UP and DOWN

always allow at least 90 degrees/second for switching to MANUAL
2017-02-25 17:53:26 +11:00
Andrew Tridgell e8b11924f8 Plane: split out the tailsitter transition complete code
use both roll and pitch to trigger completion of transition. This
copes with situations where the plane has managed to get itself rolled
over far enough that it can't recover into hover
2017-02-18 17:26:43 +11:00
Andrew Tridgell d5a3f844f1 Plane: changes for AC_WPNav 2017-02-18 17:26:43 +11:00
Andrew Tridgell c787f4c56f Plane: initial support for tailsitter transitions 2017-02-18 17:26:43 +11:00
Andrew Tridgell 83f3cee99e Plane: initial hooks for tailsitter support 2017-02-18 17:26:43 +11:00
Andrew Tridgell 0fc04b0158 Plane: setup plane frame type parameter flags 2017-02-14 19:50:01 +11:00
Andrew Tridgell c294519925 Plane: lower default Q_M_SPOOL_TIME to 0.25 2017-02-14 09:23:17 +09:00
priseborough 013eb254a2 Plane: use standard unit descriptor for milliseconds 2017-01-27 16:57:42 +09:00
Andrew Tridgell 07cedd8a66 Plane: prevent stability shutdown in transition
this prevents the vertical motors from shutting down while
transitioning if the desired throttle was too low at the start of the
transition
2017-01-25 19:01:15 +11:00
Andrew Tridgell 0d4405106f Plane: removed forcing of trim for motors in quadplane
this caused problems with tricopter tail servos
2017-01-25 19:01:15 +11:00
Andrew Tridgell 5c820adad4 Plane: fixed tilt transition with binary tilt servo
once the tilt is fully fwd then force transition as done at any
airspeed
2017-01-25 19:01:15 +11:00
Andrew Tridgell 586f8a9ca8 Plane: fixes for tilt quadplane after rebase 2017-01-25 19:01:15 +11:00
Andrew Tridgell 54bca768b8 Plane: added Q_TILT_TYPE for retract servo tiltrotors 2017-01-25 19:01:15 +11:00
Andrew Tridgell 2f100b0804 Plane: removed separate tricopter quadplane build
can all be done with one build now
2017-01-12 17:39:37 +11:00