Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
12,382 Commits 70 Branches 507 Tags 663 MiB
Commit Graph

5413 Commits

Author SHA1 Message Date
Andrew Tridgell 86f167fc7f AP_Vehicle: added autotune_level to fixed wing parms 2014-04-13 22:11:28 +10:00
Andrew Tridgell b7350118a6 AP_AHRS: enable EKF wind estimate with no airspeed sensor 
EKF can now estimate with IMU and GPS only

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-04-13 19:42:49 +10:00
Andrew Tridgell 4abc2999a6 AP_NavEKF: start with a wind estimate of 3m/s, when no direct measurement 
this will cope better with users with low roll/pitch gains, to ensure
they get enough control on takeoff

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-04-13 19:42:23 +10:00
priseborough d745dc2b6f AP_NavEKF : Increased position gate default to reduce impact of accel errors 
Flight testing with windup turns has shown that the position gate threshold
can be tripped with good GPS data causing position jerks. This increases the
initial GPS glitch rejection threshold to effectively 5m when using the
default POSNE_NOISE value of 0.5m.
 2014-04-13 19:37:22 +10:00
priseborough 188bea6bab AP_NavEKF : Enable calc of wind velocity when not using airspeed sensing 
This patch also cleans up the logic associated with use of the synthetic
sideslip measurement so that it can never be used for a non fly-forward
vehicle type

This patch adds functionality that initialises the wind-speed vector to the
reciprocal of the ground speed vector, and scaled to 6 m/s. On average this gives
a better initial wind velocity estimate on launch by assuming:

a) launch will be into wind
b) wind speed is equal to global average

It also helps prevent a headwind causing initial underestimation of airspeed
causing high autopilot gains and limit cycles on climb-out, until first
turn when the EKF is able to estimate the wind.
 2014-04-13 19:37:19 +10:00
Andrew Tridgell df192a9efd AP_AutoTune: lower min tau to 0.2 2014-04-13 19:25:54 +10:00
Andrew Tridgell 3343af602e APM_Control: fixed saving of new rate gains 2014-04-13 15:35:52 +10:00
Andrew Tridgell b9a8ef3b51 APM_Control: fixed a bug in autotune servo saturation check 
its in degrees not centi-degrees
 2014-04-13 15:28:36 +10:00
Andrew Tridgell 64170d0f04 APM_Control: added dataflash logging to autotune 2014-04-12 18:21:50 +10:00
Andrew Tridgell 7f5eeabadc DataFlash: reserve a range of msg types for autotuning logs 2014-04-12 18:21:31 +10:00
Andrew Tridgell 50fc75917e APM_Control: first version of APM_Control autotuning 
this adds autotune to the roll/pitch controllers using a very simple
mechanism. The plan is that this provides a framework which Paul and
Jon will build upon.
 2014-04-12 14:11:33 +10:00
Andrew Tridgell 3b8839d2f7 AP_GPS: fixed num_sensors on APM2 2014-04-11 21:32:55 +10:00
Andrew Tridgell 7404fc9d40 SITL: added SIM_BARO_DISABLE parameter 
useful for testing baro failure
 2014-04-11 16:47:40 +10:00
Andrew Tridgell ad18019fb1 APM_OBC: added pressure altitude termination 2014-04-11 16:47:40 +10:00
Andrew Tridgell 41dd280739 AP_Baro: expose get_altitude_difference() 
this is useful for pressure altitude calculations
 2014-04-11 16:34:02 +10:00
Andrew Tridgell 8b9b4026f0 SITL: support -P option 
this allows changing a parameter on initial startup
 2014-04-11 12:28:32 +10:00
Michael Day 312a2fc8dc AP_TECS: Parameter TECS_LAND_SPDWGT allows custom landing speed weight. 2014-04-10 15:42:49 +10:00
Andrew Tridgell 95304e27c9 DataFlash: added separate logging of each GPS 2014-04-10 10:29:30 +10:00
Andrew Tridgell a821b0e198 AP_GPS: fixed a build warning 
Debug() should not be exposed in public headers
 2014-04-10 10:28:55 +10:00
Andrew Tridgell 27a3b5fb36 AP_AHRS: fixed wind reporting with EKF and no airspeed sensor 
the EKF does not estimate wind without an airspeed sensor
 2014-04-10 06:49:23 +10:00
Randy Mackay b78e59ea30 AP_Motors: add stability patch test to example sketch 2014-04-09 21:21:29 +09:00
Andrew Tridgell a15e4633b7 SITL: prevent wind effects at negative altitudes 
this prevents crashes on takeoff with barometer noise
 2014-04-09 15:28:14 +10:00
Andrew Tridgell 1ca6583df8 AP_BoardConfig: restore /dev/vroutput change from Emile 
my mistake, sorry Emile!
 2014-04-08 21:05:41 +10:00
Emile Castelnuovo 79996986ad VRBRAIN: corrected ADC pins for volt and current sensing. 2014-04-08 16:19:20 +10:00
Emile Castelnuovo 7fe4847b6c VRBRAIN: Added NuttX driver vroutput for PWM out 
Modified script rc.APM to launch modules vrinput and vroutput
Modified startup scripts to run APM without SD
 2014-04-08 16:19:20 +10:00
Emile Castelnuovo d1e4fbf267 AP_EPM: added #defines for VRBRAIN board 2014-04-08 16:19:20 +10:00
Emile Castelnuovo e8b9e9d53c AP_Airspeed: added #defines for VRBRAIN board 2014-04-08 16:19:20 +10:00
Emile Castelnuovo 69d2633465 AP_Relay: added #defines for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo 25f1c5774f AP_NavEKF: added #defines for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo 39d9e93904 AP_BoardConfig: added #defines for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo 1d27e0d127 AP_BattMonitor: added #defines for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo ab9a320187 DataFlash: added #ifdefs for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo 06744ea7d2 AP_InertialSensor: new files and definitions for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo 4ad83f3c8a AP_Notify: new files and definitions for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo 1bc199c5bd AP_Compass: new files and definition for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo 7b5c002d2f AP_Common: new board ID for VRBRAIN 2014-04-08 16:19:19 +10:00
Emile Castelnuovo f4784fe6a1 AP_Baro: new files for VRBRAIN board 2014-04-08 16:19:19 +10:00
Emile Castelnuovo 201332caef AP_HAL: New VRBRAIN board definition and libraries 2014-04-08 16:19:19 +10:00
priseborough db043744a4 AP_NavEKF : Reduce Z accel bias process noise to provide a more stable estimate 2014-04-07 21:08:25 +10:00
priseborough 1f8b5a6d23 AP_NavEKF : Tighten GPS velocity glitch gate default setting for plane 2014-04-07 21:08:15 +10:00
priseborough 0c2489b07b AP_NavEKF : Fix bug in logging of airspeed innovation consistency ratio 2014-04-07 21:01:00 +10:00
priseborough 95c83255d7 AP_NavEKF : adjust default values for accelerometer process noise 
Slows down estimate and allows for smaller values to be set
 2014-04-07 21:00:43 +10:00
Jonathan Challinger 9959a44453 AP_Motors: properly constrain thr_adj_max 2014-04-07 14:14:32 +09:00
Randy Mackay 3600bed47a Parachute: relay parameter description update 2014-04-07 13:37:14 +09:00
Randy Mackay 879d447404 Parachute: alt_min units to meters 2014-04-07 13:37:11 +09:00
Randy Mackay 50df95316a Parachute: initialise released variable 2014-04-07 13:37:09 +09:00
Randy Mackay 5876a2fe47 AC_AttControl: increase default rp accel to 900deg/s/s 2014-04-07 13:37:08 +09:00
Randy Mackay 95579229ed Parachute: add 0.5sec delay before parachute is released 
This allows a short warning to the user through the new parachute_release tone
 2014-04-07 13:37:05 +09:00
Randy Mackay 103772abe2 Parachute: add AP_Notify.h to example sketch 2014-04-07 13:37:04 +09:00
Randy Mackay a639df0256 Parachute: set AP_Notify parachute_release flag 2014-04-07 13:37:02 +09:00
Randy Mackay e3e7fc284d Notify: add parachute release tune for Pixhawk 2014-04-07 13:37:01 +09:00
Randy Mackay 699b84e8ca Parachute: minor comment changes 2014-04-07 13:36:58 +09:00
Randy Mackay d8f9a1c6c6 Mission: add support for MAV_CMD_DO_PARACHUTE 2014-04-07 13:36:55 +09:00
Randy Mackay a682f652d0 GCS_MAVLink: generate after MAV_CMD_DO_PARACHUTE added 2014-04-07 13:36:53 +09:00
Randy Mackay cec7574465 GCS_MAVLink: add MAV_CMD_DO_PARACHUTE 2014-04-07 13:36:52 +09:00
Randy Mackay b478c3a321 AC_AttControl: return angle_ef_targets as const ref 2014-04-07 13:36:49 +09:00
Randy Mackay d4cb51d8f7 AP_Parachute: add example sketch 
Only tests that the lib compiles
 2014-04-07 13:36:37 +09:00
Randy Mackay 8600b9d4f1 RC_Channel: add parachute_release to function enum 2014-04-07 13:36:33 +09:00
Randy Mackay 9d807802cc Parachute: initial draft library 2014-04-07 13:36:25 +09:00
Andrew Tridgell efdb678e00 AP_Motors: fixed example build 2014-04-07 11:55:56 +10:00
Andrew Tridgell f4cbec0ce1 APM_OBC: removed unused example code 2014-04-07 11:55:46 +10:00
Andrew Tridgell cc212be41e AP_Mission: added get_next_ground_course_cd() API 
this gives the ground course of the next navigation leg, which can be
used to calculate the amount of steering required
 2014-04-07 09:29:54 +10:00
Andrew Tridgell e566802bf3 AP_Math: fixed example build 2014-04-07 07:37:34 +10:00
Andrew Tridgell 6f55dc1686 APM_OBC: update for AP_Mission and AP_GPS changes 2014-04-07 07:28:21 +10:00
Andrew Tridgell 43ebd86bb1 AP_GPS: disable SBP driver on APM2 
the driver uses double precision floating point, which can't work on
8bit AVR with gcc
 2014-04-05 21:47:46 +11:00
Andrew Tridgell 5a585b90e8 AP_GPS: fixed some warnings in SBP driver 2014-04-05 14:18:01 +11:00
Niels Joubert 33576dfdd9 AP_GPS: Swift Binary Protocol SINGLE-POINT-POSITIONING Driver 
This is the SBP driver for Piksi, Lodestar and other forthcoming Swift Navigation GPSes.
This driver currently implements three things:
- Implements a lightweight SBP protocol detection system
- Implements Piksi as a single-point-positioning GPS (same as ublox/others)
- Implements hardware logging of GPS health and baseline messages

Forthcoming iin future updates:
- Need to implement the RTK functionality
 2014-04-05 13:42:23 +11:00
Niels Joubert e32b73f075 AP_HAL_AVR_SITL: Adding Swift Binary Protocol stand-alone simulator 2014-04-05 13:42:23 +11:00
Niels Joubert 00064ac883 SITL: Adding GPS types for Swift Binary Protocol 2014-04-05 13:42:23 +11:00
Niels Joubert 879eb5936b AP_MATH: Adding WGS GPS conversions, CRC16 checks, and double-precision Vectors and Matrices 2014-04-05 13:42:23 +11:00
Niels Joubert 161b5f99b3 SITL: Adding Swift Binary Protocol GPS type 2014-04-05 13:42:23 +11:00
Niels Joubert 552f33b39e AP_GPS: Support fix types of DGPS and RTK 2014-04-05 13:42:23 +11:00
Niels Joubert 64d4a1236f AP_Notify: Support all GPS status flags, with status >= GPS_OK_FIX_3D notified as having a lock 2014-04-05 13:42:23 +11:00
Andrew Tridgell 67ed5b73ef AP_GPS: added lock_port() interface 
used by SERIAL_CONTROL message
 2014-04-05 07:34:33 +11:00
Andrew Tridgell b8675b9abc GCS_MAVLink: implement SERIAL_CONTROL MAVLink message 2014-04-05 07:34:33 +11:00
Andrew Tridgell 493c5dd63f GCS_MAVLink: rebuild MAVLink headers 2014-04-04 21:57:22 +11:00
Andrew Tridgell 14b3696959 GCS_MAVLink: added SERIAL_CONTROL message definition 
will be used for on-board radio and GPS firmware update and control
over USB
 2014-04-04 21:57:22 +11:00
Andrew Tridgell 07d621c4be AP_NavEKF: used state structure in more places 
makes the code a bit easier to read

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-04-04 21:30:16 +11:00
priseborough aa5335b16e AP_NavEKF : Improved GPS position glitch handling 
When using GPS after previously rejecting it, the GPS position will
always be offset if outside the specified glitch radius. This was the
original intent of the design and makes handling of glitches smoother.

It has been tested on replay using glitchy flight data
 2014-04-04 21:01:22 +11:00
priseborough b1786cf1e5 AP_NavEKF : Do not reset on GPS velocity timeout if good position data 2014-04-04 21:01:20 +11:00
priseborough d25883f712 AP_NavEKF : Limit rate of Z accel bias adaptation 
Aliasing can causes the bias estimate to fluctuate very rapidly as it tries
to keep up, which degrades the benefit of switching between
accelerometers to avoid aliasing.

This patch give a much more stable bias estimate during aliasing, and
allows the bias to adapt at a maximum rate of 1.0 m/s2 in 50 seconds
 2014-04-04 21:01:18 +11:00
priseborough 36b3cbc365 AP_NavEKF : Relax aliasing check limits 
This reduces the chance of noisy data inhibiting GPS glitch protection
 2014-04-04 21:01:15 +11:00
priseborough 0ae736c3a0 AP_NavEKF : clean up convoluted logic used in sensor health checks 
This doesn't change the behavior, but does make the code easier to
understand
 2014-04-04 21:01:13 +11:00
Andrew Tridgell 013aaf4d3e GCS_MAVLink: moved comms functions to not be inline 
saves a bit of flash space
 2014-04-04 13:19:15 +11:00
Andrew Tridgell d9d038345a AP_GPS: save 800 bytes of code space on APM2 
we can assume a single GPS
 2014-04-04 10:08:28 +11:00
Andrew Tridgell 9f857529ca AP_GPS: auto-switch primary GPS based on status and number of satellites 2014-04-04 08:32:34 +11:00
Andrew Tridgell 11f196318e RC_Channel: added static functions to simplify operations on all channels 
this avoids vehicle code having to loop over all channels for common
operations
 2014-04-03 12:18:56 +11:00
Andrew Tridgell 21c205a57e AP_GPS: cope with different MON-HW message size in u-Blox Neo7 2014-04-03 10:55:05 +11:00
Andrew Tridgell cd3038fabd AP_NavEKF: fixed return of offset in getVariances() 2014-04-03 07:49:06 +11:00
Andrew Tridgell dcb42af3e9 AP_BattMonitor: fixed example build 2014-04-03 07:49:06 +11:00
Craig Elder 3a92d75936 Ublox: Enable 1Hz Lock LED by default 2014-04-01 20:57:18 -07:00
Andrew Tridgell 067bbf5b5c DataFlash: hdop is unsigned 2014-04-02 07:55:28 +11:00
Andrew Tridgell e40a048009 AP_GPS: handle multiple GPS in GPS setHIL() 2014-04-02 07:55:28 +11:00
Andrew Tridgell 79f5618f6f AP_GPS: zero state structure on driver release 
this ensures no values are left from the previous driver
 2014-04-02 07:55:28 +11:00
Randy Mackay 2ddc414f4d InertialNav: replace safe_sqrt with pythagorous2 2014-04-01 20:43:53 +09:00
Randy Mackay 90e205c905 AC_PosControl: replace safe_sqrt with pythagorous2 2014-04-01 20:43:51 +09:00
Randy Mackay 15da01cf3a AC_WPNav: replace safe_sqrt with pythagorous2 2014-04-01 20:43:45 +09:00
Andrew Tridgell b8e4e35a0d AP_Airspeed: use pythagorous3() 2014-04-01 22:15:12 +11:00
Andrew Tridgell a7f213a5c5 AP_NavEKF: use pythagorous2() 2014-04-01 22:13:03 +11:00
Andrew Tridgell 9ab1a79b5a AP_Airspeed: changed sqrt() to sqrtf() 2014-04-01 22:09:21 +11:00
priseborough 09c5ba1aed Dataflash : Improved logging of EKF sensor health checks 
This changes the definition sof the messages in the EKF4 message to make it more useful
The values shown now relate directly to how much margin there is before a measurement
is rejected, enabling better tuning of error trap parameters
 2014-04-01 21:27:07 +11:00
priseborough 04036d7777 AP_NavEKF : Updated GPS glitch protection logic 
This adds new functionality to the detection and compensation of GPS
glitches:

1) A maximum allowable innovation is calculated using the GPS noise
parameter multiplied by the gate, with an additional component allowing
for growth in position uncertainty due to acceleration error since
the last valid measurement
2) Includes per vehicle type values for the acceleration error limit
3) If the innovation length exceeds the maximum allowable, no fusion occurs
4) If no fusion has occurred for long enough such that the position uncertainty
exceeds the maximum set by a per vehicle parameter or a maximum time, an offset
is applied to the GPS data to so that it matches the value predicted by the filter
5) The offset is never allowed to be bigger than 100m
6) The offset is decayed to zero at a rate of 1.0 m/s to allow GPS jumps to
be accommodated gradually
7) The default velocity innovation gate has been tightened up for copter and rover
8) The variance data logging output has been updated to make it more useful
 2014-04-01 21:22:14 +11:00
Andrew Tridgell 7e2ef0cfc0 AP_GPS: fixed GPS for Replay 2014-04-01 17:25:15 +11:00
Andrew Tridgell 9278685cdf AP_Math: fixed location build on SITL 2014-04-01 14:20:10 +11:00
Andrew Tridgell 77e2f48581 AP_GPS: fixed notify updates for new API 2014-04-01 06:38:25 +11:00
Andrew Tridgell 9781175bf5 AP_GPS: fixed handling of driver destruction 
this allows for more complex destructors, and ensures we don't have
multiple backends allocated at once per instance
 2014-04-01 06:38:25 +11:00
Andrew Tridgell 7ceba8dce4 AP_GPS: prevent double allocation of GPS drivers 2014-04-01 06:38:25 +11:00
Andrew Tridgell 8779ffe088 AP_GPS: flush pending config strings when uBlox starts 2014-04-01 06:38:25 +11:00
Andrew Tridgell 0191355488 AP_GPS: fixed init strings to all be in progmem 
and sent async ...
 2014-04-01 06:38:25 +11:00
Andrew Tridgell bc0c9ad6d5 AP_InertialNav: fixed example build 2014-04-01 06:38:25 +11:00
Andrew Tridgell 35c111a63a AP_AHRS: fixed example build 2014-04-01 06:38:25 +11:00
Andrew Tridgell 7b2d56a8cb AC_Fence: disable example build 
fails to build with compiler error
 2014-04-01 06:38:25 +11:00
Andrew Tridgell 3b8c6e629d AC_AttitudeControl: updated example for new GPS API 2014-04-01 06:38:25 +11:00
Andrew Tridgell c2486d8d6e AP_GPS: updated examples for new API 
removed old per-driver examples, and updates AUTO example
 2014-04-01 06:38:25 +11:00
Andrew Tridgell d04d33a02d AP_InertialNav: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell 5a2e84e792 AP_NavEKF: changes for new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell b7a2db716b AP_Arming: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell eb67948171 AP_Mount: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell f07e4dee52 AP_AHRS: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell 31d3b6555f DataFlash: convert to new GPS API 2014-04-01 06:38:23 +11:00
Andrew Tridgell 368daf89f1 AP_GPS: new GPS API 
This is a complete rewrite of the GPS driver structure, with a static
main driver and separate backend drivers. This will allow proper
support for multiple GPSes, and will allow parameters to be set on the
GPS object
 2014-04-01 06:38:23 +11:00
Andrew Tridgell 2dd92832dc AP_GPS: support multiple AP_GPS_Auto drivers 
move all static variables into a dynamically allocated structure in
the AUTO driver which gets freed when we have found a GPS type
 2014-04-01 06:38:23 +11:00
Andrew Tridgell 3c4389180e AP_GPS: removed GPS_406 driver 
this driver was untested and badly structured. If we want to support
the 406 we can revive it and do it properly
 2014-04-01 06:38:23 +11:00
Jonathan Challinger f0fc0397d3 Notify: add arming failure tone 2014-03-31 20:34:27 +09:00
Randy Mackay 7bb981f2df AP_Notify: correct dos formatting 2014-03-31 20:34:24 +09:00
Andrew Tridgell 31082f4ce2 AP_Mission: fixed a bug re-entering AUTO 
this fixes a bug found by Marco where we would continue in CRUISE mode
with no waypoint if we re-entered AUTO after a mission reset
 2014-03-31 06:18:07 +11:00
Randy Mackay 93f8d53d1b Mission: make get_prev_nav_cmd_index const 2014-03-30 23:09:54 +09:00
Randy Mackay b15d4379d8 AC_WPNav: use atan2f, make methods const 2014-03-30 23:09:51 +09:00
Randy Mackay 3ad635feeb AC_AttControl: 45deg/sec yaw rate for Auto, RTL 2014-03-30 15:44:14 +09:00
Randy Mackay d27ca53a9d AC_WPNav: spline sets origin vel to zero when no prev segment 
Issue caught by Michael Oborne
 2014-03-30 15:19:18 +09:00
Randy Mackay 7dfde39e19 AC_WPNav: advance_spline to use dt 2014-03-30 15:02:07 +09:00
Randy Mackay c0458b786a AC_WPNav: check acceleration is non zero 2014-03-30 11:52:44 +09:00
Randy Mackay f0f3688172 AC_WPNav: rounder corners for short spline segments 2014-03-30 11:52:41 +09:00
priseborough 9c5f564dc5 AP_NavEKF : Fixes bug in initial earth magnetic field states 
The calculation for these states was not being bias corrected
 2014-03-30 07:43:52 +11:00
Randy Mackay 7bff8e9312 AC_AttControl: constrain earth frame yaw angle error 
This temporarily resolves the wobble we see in Auto when the target
heading is suddenly changed leading to a large yaw angle error
 2014-03-29 20:42:21 +09:00
Randy Mackay 197683d539 WPNav: clean up spline comments 2014-03-29 17:57:47 +09:00
priseborough e1819bb53a AP_NavEKF : Add initial parameter defaults for Copter, Rover and Plane 2014-03-29 14:06:43 +11:00
Randy Mackay ac339a0289 Mission: add decoding of NAV_SPLINE command 2014-03-28 09:23:30 +09:00
Randy Mackay e7be622eef GCS_MAVLink: generate after adding NAV_SPLINE cmd 2014-03-28 09:23:28 +09:00
Randy Mackay 519d5fc444 GCS_MAVLink: add MAV_CMD_NAV_SPLINE_WAYPOINT cmd 
This is the same as a NAV_WAYPOINT except that the vehicle flies a
spline curved path to the destination
 2014-03-28 09:23:23 +09:00
Randy Mackay 24eb195aa3 WPNav: add yaw control for straight line wp nav 2014-03-28 09:23:13 +09:00
Randy Mackay b42b12f7be AC_WPNav: add get_spline_yaw 2014-03-28 09:23:07 +09:00
Randy Mackay f2d9ad41aa Mission: minor comment update 2014-03-28 09:22:56 +09:00
Randy Mackay e5e71ce371 WPNav: add spline support 2014-03-28 09:22:53 +09:00
Michael Day e1d193f539 GCS_MAVLink: Generated code from message additions for autofence. 2014-03-27 09:26:20 +11:00
Michael Day c5ebd120f1 GCS_MAVLink: XML for MAV_CMD_DO_FENCE_ENABLE and MAV_SYS_STATUS_GEOFENCE 2014-03-27 09:26:20 +11:00
priseborough 55c60b8f07 AP_NavEKF : Reduce Magnetometer innovation consistency check threshold 2014-03-26 21:29:47 +11:00
priseborough 45b1a2fa46 AP_NavEKF : Reduce GPS position innovation consistency fail threshold 
This patch reduces the maximum acceptable GPS jump from approximately 16 to 8 metres
This will provide copters with more protection for close in loiter situations
 2014-03-26 21:29:45 +11:00
Andrew Tridgell 8c0c9c317e RC_Channel: prevent a numerical exception with bad mount parameters 2014-03-26 17:38:27 +11:00
Andrew Tridgell bafc664750 AP_NavEKF: use APM_BUILD_TYPE() macro 2014-03-26 12:42:11 +11:00
Andrew Tridgell fbec098e2f AP_Vehicle: added APM_BUILD_TYPE() macro 
this makes checking build type less fragile
 2014-03-26 12:41:53 +11:00
Andrew Tridgell e3792f9b26 AP_NavEKF: added a mechanism for per-vehicle-type defaults in EKF 2014-03-26 12:30:17 +11:00
Andrew Tridgell 6b2f0b9553 AP_Vehicle: added defines for main vehicle types 2014-03-26 12:15:45 +11:00
Andrew Tridgell 6bf2b5033e DataFlash: support logging up to 14 RC input channels 2014-03-25 16:39:19 +11:00
Andrew Tridgell 6039eab442 RC_Channel: support up to 12 aux channels on PX4 
this allows RC13 and RC14 to work correctly as aux outputs on Pixhawk
 2014-03-25 15:42:48 +11:00
Andrew Tridgell 64772cede8 GCS_MAVLink: rebuild MAVLink headers 2014-03-25 14:47:43 +11:00
Andrew Tridgell d24547b390 GCS_MAVLink: merge latest msgs from upstream 2014-03-25 14:47:05 +11:00
Andrew Tridgell 6eee2421cc AP_HAL: removed RCInput valid_channels() and added new_input() and num_channels() 
the valid_channels() method was inconsistently implemented between
boards, and served two quite different purposes. It is clearer as two
functions
 2014-03-25 14:39:41 +11:00
Andrew Tridgell 27dbf608c8 DataFlash: fixed a build warning 2014-03-25 13:31:21 +11:00
Andrew Tridgell 2a9a89e020 HAL_PX4: fixes for merged upstream PX4Firmware 2014-03-25 10:30:00 +11:00
priseborough 17cdac7bc8 AP_NavEKF : Clean up angle and mag field initialisation 
This path reduces duplicated code, eliminates unused variables and
causes the earth magnetic field states to be reset when exiting static mode
which will occur every time copter is armed. This enables copters to be
powered on and initialised inside vehicles or houses, without bad earth
field values affecting flight.
 2014-03-24 19:54:48 +11:00
Andrew Tridgell f05b90bfd2 GCS_MAVLink: fixed some compiler warnings 2014-03-24 12:52:39 +11:00
Andrew Tridgell 0af35bd636 AP_Mission: fixed some compiler warnings 2014-03-24 12:52:27 +11:00
Andrew Tridgell 2763393908 AP_InertialSensor: fixed some compiler warnings 2014-03-24 12:52:16 +11:00
Andrew Tridgell c6f3e0a81c AP_GPS: fixed example builds 2014-03-24 12:20:34 +11:00
Andrew Tridgell 271ba3a6bc AP_InertialNav: fixed example build 2014-03-24 12:03:47 +11:00
Andrew Tridgell 1b1a92251f DataFlash: allow drivers to setup their own logging formats 
this allows drivers to ask the dataflash driver to add new log formats
 2014-03-24 12:03:31 +11:00
Andrew Tridgell 5630bb1ef6 AP_GPS: added detailed hardware status logging for uBlox 
this gives us noise, jamming and RF information from the uBlox
protocol. This will hopefully allow a more detailed investigation of
antenna choices and RF interference
 2014-03-24 12:02:37 +11:00
Andrew Tridgell 7ff293ca38 AP_GPS: added DataFlash to GPS init to allow for detailed logging 
this will allow GPS drivers to log much more detailed device specific
information
 2014-03-24 12:01:13 +11:00
Andrew Tridgell 485ae596fc AP_Compass: fixed last_update for secondary compass with primary failed 
this ensures EKF and DCM will use a secondary compass if the primary
fails
 2014-03-23 22:05:17 +11:00
Matthew Lloyd 60a4f74de6 AP_Compass: avoid division by zero if we haven't received any mag reports 
Otherwise, get_field() will return NaNs after once every few calls to
read() during compassmot on PX4 platforms, which causes compassmot to fail.

This is a quick hack around the deeper issue, which could be something
like the PX4 mag driver experiencing starvation and skipping mag reports,
buffer overrun or something else that causes mag reports to be dropped.
Or perhaps we should never expect in the first place that we will always
receive at least one mag report between calls to read().
 2014-03-23 21:22:32 +11:00
priseborough 7ae86b3979 AP_NavEKF : Track baro height observations pre-arm 
This prevents copter from failing the pre-arm height discrepancy test
 2014-03-23 18:25:50 +11:00
priseborough 7780d55788 AP_NavEKF : Prevent large magnetic field adaptations early in flight 2014-03-22 19:55:26 +11:00
Randy Mackay 3efad982c0 GCS_Mavlink: return MISSION_INVALID when conversion fails 
Requested by MichaelO to allow better error message to be displayed to
user when the mission upload from the GCS to vehicle fails
 2014-03-22 11:29:36 +09:00
Paul Riseborough f7007569d1 AP_NavEKF : Fix bug that limits copter sensor delay compensation to 125 
msec
 2014-03-21 21:52:20 +11:00
Paul Riseborough b2c0979947 AP_NavEKF : Fixes bug that causes accel bias to diverge in static mode, preventing copter arming 2014-03-21 21:49:50 +11:00
Andrew Tridgell a55c4e2296 AP_TECS: set target airspeed, not min/max airspeed, on landing 
this seems to prevent ballooning of the altitude when we are in the
landing approach, and gives a much smoother landing
 2014-03-20 17:34:39 +11:00
Andrew Tridgell 98530928b5 AP_TECS: make target landing speed a float 
some users may want more precise control
 2014-03-20 17:34:36 +11:00
Andrew Tridgell b1ad2be897 AP_SpdHgtControl: added get_target_airspeed() interface 2014-03-20 17:34:29 +11:00
Michael Day bd7e1b82e1 AP_TECS: Auto landing now takes throttle_nudge into account. 2014-03-20 17:34:26 +11:00
Michael Day 861690dea2 AP_TECS: New params LAND_ARSPD and LAND_THR auto-slowing landings. 
Also controlling pitch by ignoring height error during landing.
This serves to keep the nose up.
 2014-03-20 17:34:23 +11:00
Andrew Tridgell 3bdc22d672 AP_Mission: make p1 16 bit 
this gives us a 16 bit value for extra data on a location, allowing
for an accurate angle in centi-degrees.

Also add validation of the size of the union arms in Content
 2014-03-20 16:57:09 +11:00
Andrew Tridgell 959cafef8d AP_Common: make alt in Location 24 bit 
this allows for up to 83km mission altitudes, while allowing for 1
more byte in the command structure, making p1 16 bits
 2014-03-20 16:57:09 +11:00
Andrew Tridgell d508c7f37f GCS_MAVLink: re-generate MAVLink headers 2014-03-20 10:21:28 +11:00
Andrew Tridgell 106fda773f GCS_MAVLink: merge XML from upstream 2014-03-20 10:20:00 +11:00
Andrew Tridgell 8af9573806 GCS_MAVLink: allow logging of RADIO_STATUS, very useful for link analysis 2014-03-20 09:56:37 +11:00
Michael Day 68dbfd6315 DataFlash: Add Log_Write_Radio to store RSSI and noise on board. 2014-03-20 09:56:37 +11:00
Andrew Tridgell 8202cf437b AP_Relay: fixed Pixhawk relay pin numbers 
thanks to Craig for spotting this!
 2014-03-20 09:40:08 +11:00
Paul Riseborough 8a2d16d13d AP_NavEKF : modifed Zaccel bias noise parameter to prevent unstable bias estimate 2014-03-20 08:50:00 +11:00
Randy Mackay c520cb789c Mission: cmd field types to match mavlink commands 
Split Set-Servo and Repeat-Servo command structures
Split Set-Relay and Repeat-Relay command structures
 2014-03-19 12:14:22 +09:00
Andrew Tridgell 0832aba6bc GCS_MAVLINK: moved deferred message handling into common code 2014-03-19 12:14:15 +09:00
Andrew Tridgell 8d89a64312 GCS_MAVLink: moved handling of MISSION_ITEM into common code 2014-03-19 12:14:09 +09:00
Andrew Tridgell ba8c4b86a0 AP_InertialNav: fixed example build 2014-03-19 12:14:08 +09:00
Andrew Tridgell d36989f6a1 AP_HAL: fixed example build 2014-03-19 12:14:06 +09:00
Andrew Tridgell d3d71d597c AP_Baro: fixed example build 2014-03-19 12:14:05 +09:00
Andrew Tridgell dbd8f4b735 AP_Airspeed: fixed example build 2014-03-19 12:14:03 +09:00
Andrew Tridgell afab8a9c5b AP_AHRS: fixed example build 2014-03-19 12:14:02 +09:00
Andrew Tridgell 04587efb2d AC_WPNav: fixed example build 2014-03-19 12:14:00 +09:00
Andrew Tridgell 1e9dcba3da AC_Sprayer: fixed example build 2014-03-19 12:13:59 +09:00
Andrew Tridgell 4507c0fc4c AC_Fence: fixed example build 2014-03-19 12:13:57 +09:00
Andrew Tridgell 73ae38eaf0 AC_AttitudeControl: fixed example build 2014-03-19 12:13:56 +09:00
Andrew Tridgell 23e296dd00 GCS_Console: fixed example build 2014-03-19 12:13:55 +09:00
Andrew Tridgell 5f85792224 DataFlash: fixed example build 2014-03-19 12:13:53 +09:00
Andrew Tridgell 2a199c4f03 AP_Notify: fixed example build 2014-03-19 12:13:51 +09:00
Andrew Tridgell 6eece3a278 AP_Mount: fixed example build 2014-03-19 12:13:50 +09:00
Andrew Tridgell acd54d0826 AP_Math: fixed example build 2014-03-19 12:13:48 +09:00
Andrew Tridgell 731f980327 AP_InertialSensor: fixed example build 2014-03-19 12:13:47 +09:00
Andrew Tridgell 965f6bd3bd GCS_MAVLink: make DataFlash a pointer 
handle sketches where DataFlash is not available
 2014-03-19 12:13:37 +09:00
Andrew Tridgell b85c5123b2 GCS_MAVLink: added save parameter to handle_request_data_stream() 
this allows copter to not save stream rate changes
 2014-03-19 12:13:35 +09:00
Andrew Tridgell 79bb14b8c1 GCS_MAVLink: moved RADIO_STATUS handling into common code 2014-03-19 12:13:34 +09:00
Andrew Tridgell 144217ac74 GCS_MAVLink: moved parameter and stream handling into common code 
this keeps it in common between vehicles, and saves stack space
 2014-03-19 12:13:32 +09:00
Andrew Tridgell 06c578eb34 GCS_MAVLink: re-generate MAVLink headers 2014-03-19 12:13:31 +09:00
Andrew Tridgell 0b811ba6a9 GCS_MAVLink: added have_flow_control() method 
can be used to change speed of handling some protocol methods, as we
know communication will be reliable
 2014-03-19 12:13:25 +09:00
Randy Mackay c462adf2ee GCS_MAVLink: added five handle_mission methods 
The five methods moved from the vehicle specific code are
handle_mission_request_list, set_current, count, clear_all and
write_partial_list
 2014-03-19 12:13:19 +09:00
Randy Mackay 3938fb7255 GCS_MAVLink: loiter direction removed 
This is now handled in Mission library
 2014-03-19 12:13:18 +09:00
Randy Mackay 37cff752c8 Mission: handle Loiter direction 
loiter-unlimited, loiter-turns and loiter-time cms specify the turn
direction in Param3.  This is stored in the location's loiter_ccw flag.
Previously supported only in Plane, moving here allows us to share more
code with Plane, Copter, Rover.
 2014-03-19 12:13:16 +09:00
Andrew Tridgell add2416dbe GCS_MAVLink: added handle_mission_request() common function 
this handles requests for mission items, using stack saving

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:13:10 +09:00
Andrew Tridgell ce29bbe394 GCS_MAVLink: save some memory in log download 
use an existing buffer instead of using the mavlink _send()
function. This saves some stack space in log download

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:13:09 +09:00
Randy Mackay c75560218d Mission: command specific structures 2014-03-19 12:12:51 +09:00
Randy Mackay 865a4de33d Common: use PACKED instead of pragma pack for Location 2014-03-19 12:12:49 +09:00
Randy Mackay 869f325c66 DataFlash: Log_Write_MavCmd replaces Log_Write_Cmd 2014-03-19 12:12:43 +09:00
Andrew Tridgell 3a6698f54b AP_Mission: fixed typo 2014-03-19 12:12:42 +09:00
Andrew Tridgell 3538621c48 AP_Mission: doc updates 2014-03-19 12:12:40 +09:00
Randy Mackay 48329c1bba Mission: bug fix for loading consecutive do-cmds 
The verify step was not being run for the 2nd consecutive do-command in
a mission list
 2014-03-19 12:12:37 +09:00
Randy Mackay ece02b0c9a Mission: get_prev_nav_cmd returns int16 2014-03-19 12:12:34 +09:00
Randy Mackay 266a1ce9af Mission: bug fix set_current_cmd 
If mission had completed desired command index was ignored
 2014-03-19 12:12:27 +09:00
Andrew Tridgell 107cc2c126 AP_Mission: added truncate() function 
Used when loading a mission while flying

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:21 +09:00
Andrew Tridgell acdaf561c8 AP_Mission: fixed typo 2014-03-19 12:12:15 +09:00
Randy Mackay ebf72f5beb Dataflash: example sketch includes AP_Mission.h 2014-03-19 12:12:10 +09:00
Randy Mackay 150faafaf4 Dataflash: add Log_Write_Cmd method 2014-03-19 12:12:07 +09:00
Randy Mackay 8e117d29eb Mission: test exceeding command storage size 2014-03-19 12:11:55 +09:00
Randy Mackay 9e07070d86 Mission: pass eeprom start into constructor 
This allows different storage locations for ArduCopter, Plane and Rover
 2014-03-19 12:11:53 +09:00
Randy Mackay 7663c5898e AP_HAL_Boards: board specific storage size definition 2014-03-19 12:11:52 +09:00
Randy Mackay ddc4cd4f18 Mission: add init and check_eeprom_version methods 2014-03-19 12:11:46 +09:00
Randy Mackay 4c0a31a9dc Mission: init home to zero before writing to eeprom 2014-03-19 12:11:37 +09:00
Randy Mackay df339c05fc Mission: num_commands returns uint16 2014-03-19 12:11:25 +09:00
Randy Mackay af186fba05 AP_Common: pack Location structure 
This resolves issues storing and retrieving Location to eeprom as part
of AP_Mission
 2014-03-19 12:11:13 +09:00
Randy Mackay e60865b715 Mission: example sketch test for set_current_cmd 2014-03-19 12:11:12 +09:00
Randy Mackay 512b378c4a Mission: allow set_current_cmd when mission is not running 
Can now be run when mission is complete or stopped.  When mission is
resumed it will begin at the set command.  This command can be either a
nav or do command
 2014-03-19 12:11:10 +09:00
Andrew Tridgell eaf34bba9a AP_Mission: fixed reset using set mission item to 0 
this causes a mission reset
 2014-03-19 12:11:07 +09:00
Randy Mackay 8dd301b0c2 Mission: set_current_cmd to use uint16 2014-03-19 12:11:06 +09:00
Randy Mackay a6e422333e Mission: remove alt_in_cm from mavlink to cmd conversion 2014-03-19 12:11:01 +09:00
Randy Mackay efd4058e8b AHRS: interate move of p1 from Location to mission cmd 2014-03-19 12:10:51 +09:00
Randy Mackay 5dd86bd7d7 Mission: update example sketch for p1's move to cmd structure 2014-03-19 12:10:49 +09:00
Randy Mackay 87126c9b71 Common: remove id and p1 from Location structure 
id and p1 are now part of AP_Mission's Mission_Command structure
 2014-03-19 12:10:46 +09:00
Randy Mackay 0dc3c9ab42 Mission: add p1 to command structure 
mavlink_to_mission_cmd method extended to support plane including adding
parameter to allow the alt to be expressed in cm or meters
 2014-03-19 12:10:45 +09:00
Randy Mackay 4c0ae63169 Mission: example sketch test replace_cmd method 2014-03-19 12:10:42 +09:00
Randy Mackay 61cc5e6b72 Mission: add replace_cmd method 2014-03-19 12:10:40 +09:00
Randy Mackay ef21e32fbc Mission: example sketch tests set current command 2014-03-19 12:10:37 +09:00
Randy Mackay 3cbbd4ebb9 Mission: add set current command method 2014-03-19 12:10:36 +09:00
Randy Mackay c7ffd2db90 Mission: reduce unnecessary search for do-commands 
do_cmd_all_done flag is set after all do-commands are complete
 2014-03-19 12:10:33 +09:00
Randy Mackay 0c92d60406 Mission: command index increase to int16 
Once more eeprom space is allocated this will allow more than 255
commands
 2014-03-19 12:10:31 +09:00
Randy Mackay 85b979ede9 Mission: support do-jump num_times is -1 
do-jump loops forever when num times is set to -1
 2014-03-19 12:10:29 +09:00
Randy Mackay c6c43847b6 Mission: example sketch tests set home command 2014-03-19 12:10:27 +09:00
Randy Mackay 9ef27955b5 Common: add location options masks 2014-03-19 12:10:20 +09:00
Randy Mackay cc8554fa2b Mission: fix example sketch 2014-03-19 12:10:18 +09:00
Randy Mackay f4d8ccc128 Mission: add mavlink to cmd conversion methods 2014-03-19 12:10:17 +09:00
Randy Mackay 87c7d19f83 AP_Mission: special handling for cmd 2014-03-19 12:10:14 +09:00
Randy Mackay e8db57ced3 AP_Mission: replace block read/write for eeprom 
Also reserve command #0 for home position
 2014-03-19 12:10:00 +09:00
Randy Mackay fd009d0704 AP_Mission: tests added to example sketch 2014-03-19 12:09:59 +09:00
Randy Mackay 84b3497a82 AP_Mission: fixes to protect against endless loops 2014-03-19 12:09:57 +09:00
Randy Mackay 6086bc14be AP_Mission: mostly working draft 2014-03-19 12:09:56 +09:00
Randy Mackay 4285eba297 AP_Mission: initial draft library 2014-03-19 12:09:54 +09:00
Randy Mackay dd45647626 AC_PosControl: update some comments re leash lengths 2014-03-17 10:13:02 +09:00
Holger Steinhaus 345115fddd AC_PosControl: fixed leash length calc for descent speed 2014-03-17 10:12:47 +09:00
Andrew Tridgell 6b5d27efbb AP_GPS: fixed example builds with change to init() 2014-03-16 06:44:50 +11:00
Andrew Tridgell 68462025ba RC_Channel: constrain norm_input() to -1 to 1 
if RC is not properly calibrated we could get a value beyond 1, which
could cause some flight modes to exceed the roll/pitch limits of the
aircraft
 2014-03-15 20:43:13 +11:00
Andrew Tridgell 9cf1fd46c8 AP_GPS: removed nav_setting default 
not needed, and apparently caused issue with xcode 5.1
 2014-03-14 07:49:56 +11:00
Paul Riseborough dacba5d911 AP_NavEKF : Update default tuning parameters (for plane use) 2014-03-14 06:07:58 +11:00
Paul Riseborough d0828d9c15 AP_NavEKF : Prevent bad user parameter causing incorrect GPS fusion 2014-03-14 06:07:58 +11:00
Paul Riseborough a24bfc1b8a AP_NavEKF : Use synthetic sideslip fusion during GPS denied operation with airspeed 2014-03-14 06:07:57 +11:00
Paul Riseborough 35811758d7 AP_NavEKF : Update comments and remove un-used function declarations 2014-03-14 06:07:57 +11:00
Andrew Tridgell db48ed9218 AP_Compass: fixed showing of is_external for 2nd compass 2014-03-13 16:26:43 +11:00
Andrew Tridgell beb6123576 GCS_MAVLink: send a "zero logs" message when no logs available 2014-03-11 17:12:22 +11:00
Andrew Tridgell ecdd74d580 DataFlash: return number of logs as zero correctly 
when we have no file based logs, report no logs :)
 2014-03-11 17:11:58 +11:00
Andrew Tridgell d9e8c34a89 GCS_MAVLink: allow for proxying of larger MAVLink messages on PX4 
this makes it possible to deal with large MAVLink messages
 2014-03-11 13:48:25 +11:00
Paul Riseborough 784034170d AP_NavEKF : increased useage of helper functions 2014-03-10 21:54:03 +11:00
Paul Riseborough 7b3130cfcc AP_NaVEKF : Enable operation without airspeed and compass 2014-03-10 21:53:09 +11:00
Paul Riseborough 3a5acb9cea AP_NavEKF : improved on-ground, in-air check and GPS yaw alignment 2014-03-10 14:07:34 +11:00
Paul Riseborough b47a11edf6 AP_NavEKF : improved static and on-ground mode selection logic 2014-03-10 04:39:59 +11:00
Paul Riseborough 15a44571c2 AP_NavEKF : enable operation without a compass for planes 2014-03-09 20:01:45 +11:00
Paul Riseborough 2019708056 AP_NavEKF : Make all compass use autodetect 2014-03-09 19:59:19 +11:00
Paul Riseborough e485b246e7 AP_NavEKF : update comments 2014-03-09 19:59:18 +11:00
Paul Riseborough c8bd415b00 AP_NavEKF : Add sideslip constraint to allow plane flight without magnetometer 2014-03-09 19:59:17 +11:00
Paul Riseborough 52fabc822f AP_NavEKF : Add low speed magnetometer calibration option 2014-03-09 19:59:16 +11:00
Paul Riseborough 88b0364fcd AP_TECS : Add protection for airspeed runaway due to pitch errors 2014-03-09 19:59:16 +11:00
priseborough 6ace31b6c1 AP_NavEKF : Fix bug that leaves height unconstrained in static mode 2014-03-09 19:27:21 +11:00
Mike McCauley c90d3ff59e Flymaple: RCOUtput disable_ch() now supports disabling outputs 2014-03-08 21:55:57 +11:00
Andrew Tridgell 794cc33e6a GPS: added set_secondary() function 
for preventing notify updates for 2nd GPS
 2014-03-08 21:47:49 +11:00
Paul Riseborough 94ff7522fc AP_NavEKF : Fix bug in initial East mag field state variance 2014-03-08 07:44:34 +11:00
Andrew Tridgell 63234d4c22 AP_Baro: fixed linux build of BMP085 driver 2014-03-07 09:33:43 +11:00
Randy Mackay 4cfe50b70c Notify: brighter RGB LED when on battery power 2014-03-05 21:38:29 +09:00
Randy Mackay 1c457d8448 Mount: add get_mode and set_mode_to_default methods 2014-03-05 16:01:11 +09:00
Andrew Tridgell dd502e98b4 RC_Channel: added support for separate wheel steering channels on planes 2014-03-05 12:57:50 +11:00
Andrew Tridgell a788405c8b RC_Channel: added percent_input() function 
useful for plane flaps
 2014-03-05 09:17:50 +11:00
Randy Mackay 25ee5d5dc8 AC_AttControl: smoothing_gain to angle_ef_roll_pitch_rate_ef_yaw_smooth 
pair-programmed with lthall
 2014-03-04 22:23:14 +09:00
lthall 15f88c2a2b AC_AttControl: Stabilize input shaping 2014-03-04 21:52:18 +09:00
Andrew Tridgell 5f85e7af6a HAL_PX4: switch to new serial port for 2nd GPS 2014-03-04 20:34:44 +11:00
Andrew Tridgell af2f72acb0 HAL_SITL: honor SIM_GPS2_ENABLE option 2014-03-03 07:07:29 +11:00
Andrew Tridgell 7a52938f68 SITL: added SIM_GPS2_ENABLE option 2014-03-03 07:07:09 +11:00
Mike McCauley be34e0358a RC_Channel: Removed duplicate defines from RC_Channel.h 2014-03-03 06:34:34 +11:00
Andrew Tridgell 449d09051e AP_NavEKF: cope with compass going offline while in flight 2014-03-02 14:32:10 +11:00
Andrew Tridgell 77f91e6250 AP_NavEKF: don't assume the number of gyros == number of accels 2014-03-02 13:53:19 +11:00
Paul Riseborough ebb3cc3348 AP_NavEKF : Use average of dual IMU gyro data when available 2014-03-02 13:28:44 +11:00
Paul Riseborough a39d00fc13 AP_NavEKF : Fix bug that prevents Zacc bias state variance being updated 2014-03-02 13:27:22 +11:00
Paul Riseborough 573b3210dd AP_NavEKF : Add div0 protection to the IMU1_weighting calc 2014-03-02 08:10:06 +11:00
Paul Riseborough bd152d332c AP_NavEKF : Add accel aliasing protection 2014-03-02 08:10:04 +11:00
Andrew Tridgell 853271dd37 Replay: moved replay tool into Tools/Replay 2014-03-01 14:30:55 +11:00
Andrew Tridgell 295cd9adba AP_NavEKF: give a sensible error for no such file on replay 2014-03-01 14:24:51 +11:00
Paul Riseborough 854f013146 AP_NavEKF : Fixes zero compass offsets on initialisation 2014-02-28 19:43:12 +11:00
Andrew Tridgell cc4c443b32 SITL: simulate dual accel/gyro 2014-02-28 17:30:38 +11:00
Jonathan Challinger e81d2e9584 AP_InertialSensor: Correct out-of-bounds array access that was causing SITL to crash 2014-02-28 17:25:54 +11:00
Andrew Tridgell 736201689b AP_NavEKF: only use the active accel from DCM if fly_forward is set 2014-02-27 17:40:13 +11:00
Andrew Tridgell aaaae9a222 AP_AHRS: added get_fly_forward() method 
will be used to detect a copter
 2014-02-27 17:39:49 +11:00
Paul Riseborough 62eff63267 AP_NavEKF : Increase the tuning range for magnetometer measurement noise 2014-02-27 17:20:38 +11:00
Andrew Tridgell 9a5ecc9541 AP_AHRS: use primary accel for accel_ef 
Logs from Randy show that the copter INav code can't handle the
accelerometer sensor changing.
 2014-02-27 16:28:37 +11:00
Andrew Tridgell 2c85a7ba56 AP_InertialSensor: expose get_primary_accel() for use in AHRS 2014-02-27 16:27:46 +11:00
Andrew Tridgell cf148fa76c AP_Compass: improved COMPASS_ORIENT and COMPASS_EXTERNAL for Pixhawk 2014-02-27 12:46:27 +11:00
Andrew Tridgell a9e683dada AP_NavEKF: use the accelerometer chosen by DCM for each step 2014-02-27 09:41:48 +11:00
Andrew Tridgell b53496d470 AP_AHRS: choose the best accelerometer at each drift correction step 
this greatly reduces the impact of aliasing on accelerometers by
choosing the accelerometer that produces the smallest error term in
DCM. The difference can be quite dramatic on the Pixhawk.
 2014-02-27 09:41:28 +11:00
Andrew Tridgell 0b45d2bc06 AP_AHRS: removed the AHRS_GPS_DELAY parameter 
the best value has turned out to be 1, and tweaking it has not turned
out to be useful, so this simplifies the code in preparation for
adding the anti-aliasing handling with multiple accelerometers
 2014-02-27 08:57:44 +11:00
Paul Riseborough 78a1cac560 AP_NavEKF : Improved heading and magnetic field state initialisation 2014-02-27 08:12:10 +11:00
Paul Riseborough d83b382e59 AP_NavEKF : Fix variance constraint bug 
Constraining variances to a minimum value of 1e-9 was causing problems
with gyro bias and angular accuracy in noisy GPS environments.
Because the constraint is applied after every covariance prediction
and correction, a lower value of 0 is more appropriate.
 2014-02-27 08:12:03 +11:00
Andrew Tridgell 8b59e564ba AP_NavEKF: improved replay timing 2014-02-27 08:11:04 +11:00
Andrew Tridgell 840f1b9a1e AP_InertialSensor: make HIL timing more accurate 
needed for 400Hz replay
 2014-02-27 08:10:42 +11:00
Andrew Tridgell 66f238c0da AP_NavEKF: support 400Hz replay from 50Hz logs 2014-02-26 19:34:01 +11:00
Andrew Tridgell 3fa2207a2d AP_HAL: allow for microsecond resolution in scheduler->stop_clock() 
this makes 400Hz in the replay code possible
 2014-02-26 19:33:39 +11:00
Andrew Tridgell 6fc5c12f1d AP_AHRS: remove unused variable 2014-02-26 10:28:12 +11:00
Andrew Tridgell 866e32f059 AP_Motors: removed unused variable 2014-02-26 09:40:39 +11:00
Andrew Tridgell e410733682 DataFlash: added GPS2 logging 2014-02-26 09:19:00 +11:00
Andrew Tridgell 0115b9fa07 HAL_SITL: support a 2nd GPS 2014-02-26 08:19:47 +11:00
Andrew Tridgell 836f473db2 HAL_FLYMAPLE: no uartE 2014-02-26 08:19:20 +11:00
Andrew Tridgell 58d5454d65 HAL_Empty: no uartE 2014-02-26 08:19:18 +11:00
Andrew Tridgell 6c74ca58c3 HAL_AVR: no uartE 2014-02-26 08:19:15 +11:00
Andrew Tridgell 4cb61f1f08 AP_HAL: support uartE 2014-02-26 08:18:20 +11:00
Andrew Tridgell bf2dd141e9 HAL_PX4: support uartE for 2nd GPS 2014-02-26 08:18:11 +11:00
Andrew Tridgell 63874dfffd AP_NavEKF: set fix type in GPS replay 2014-02-25 21:10:49 +11:00
Andrew Tridgell d7b2a09919 AP_GPS: added fix type to setHIL 2014-02-25 21:10:30 +11:00
Andrew Tridgell 09cce5d24e AP_NavEKF: fixed replay with current copter logs 2014-02-25 20:56:53 +11:00
Jonathan Challinger f321a5f241 AP_AHRS: Change airspeed_estimate to const in children of AP_AHRS 
Allows roll/pitch controllers to use DCM's airspeed estimate. Thanks to Kevin Hester for assistance in finding this.
 2014-02-25 18:49:16 +11:00
Paul Riseborough 72a91ccbca AP_NavEKF : Prevents aliasing triggering innovation consistency check failures 2014-02-25 15:55:44 +11:00
Andrew Tridgell 7a6f671659 AP_GPS: added have_vertical_velocity() function 
for use by EKF
 2014-02-24 18:24:10 +11:00
Andrew Tridgell a273951f70 HAL_Linux: added missing Util.cpp 2014-02-24 11:59:24 +11:00
Paul Riseborough 5db9a87d31 AP_NavEKF : fixed bug in velocity rate of change filter 
This bug meant the velocity rate of change used to scale the GPS measurement variances was noisy and too small
 2014-02-23 19:50:37 +11:00
Paul Riseborough 01c84c3f47 AP_NavEKF : fixed bug in height limit range 2014-02-23 19:50:36 +11:00
Paul Riseborough 36d619ec3a AP_NavEKF : Changed default IMU bias process noise to use smallest value 2014-02-23 19:50:36 +11:00
Paul Riseborough 89e0b48320 AP_NavEKF : Bug fix for height drift due to timer wrap-around 2014-02-23 19:50:35 +11:00
Paul Riseborough 939a32a7bb AP_NavEKF : Improved stability of Z accel bias 2014-02-23 19:50:34 +11:00
Paul Riseborough 9f3c19c03a AP_AHRS : change initialisation requirements for EKF and use dynamic method 2014-02-23 19:50:34 +11:00
Andrew Tridgell 6732d6c79b AP_InertialSensor: enable get_accel_count() and get_gyro_count() APIs for HIL 2014-02-23 19:10:07 +11:00