Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
6,465 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

86 Commits

Author SHA1 Message Date
Andrew Tridgell 8d87aa41b9 APM: Update for DataFlash changes 2011-12-28 16:00:49 +11:00
Doug Weibel 8e17b8d6d4 Correct a bug in throttle failsafe feature 2011-12-24 15:34:31 -07:00
Andrew Tridgell 5e347854c3 setup the main loop failsafe after RC library is setup 2011-12-23 11:13:01 +11:00
Andrew Tridgell 26d5d3c385 fixed HIL build 2011-12-21 23:31:39 +11:00
Andrew Tridgell 29fa78214b APM: added failsafe support 
we now pass all channels through at 50Hz if the main loop stops
running, regardless of why. This gives us a reasonable failsafe, as
long as the low level RC library is still working, and interrupts
don't get completely disabled.
 2011-12-21 23:31:39 +11:00
Andrew Tridgell f25ee899f3 APM: run mavlink loop while erasing logs 2011-12-18 10:19:52 +11:00
Andrew Tridgell df094ce463 fixed airspeed sensor for ArduPlane on APM2 
we were trying to use a non-existant ADC chip!
 2011-12-17 07:29:09 +11:00
Andrew Tridgell b9a88aac32 geofence: added FENCE_TRIGGERED_PIN 
this allows for a digital pin to be set high when the geofence
triggers. This pin can be connected to an external failsafe device
 2011-12-17 07:29:08 +11:00
Andrew Tridgell 1998908a05 DCM: reset the DCM matrix after a ground start 2011-12-13 21:33:07 +11:00
Andrew Tridgell 483bef35e5 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell 07dba4eff7 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Pat Hickey a99a1dbc9a ArduPlane: update AP_Baro construtors and initializers 2011-12-11 15:21:10 -08:00
Pat Hickey f3ad7f3af8 Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Pat Hickey f2652d23bf ArduPlane: calibrate accel with imu.init_accel after imu.init 
* complements commit 73418559, where init_accel was eliminated
  from AP_IMU_INS::init cold start.
 2011-12-10 13:32:47 -08:00
Doug Weibel b03de3095e Add DataFlash.Init before doing a forced log erase on eeprom reset. 
Add progress indication during log erase
 2011-11-28 19:42:27 -07:00
Pat Hickey f7a9b8a563 ArduPlane: LED digital writes use LED_OFF and LED_ON 2011-11-25 20:00:19 -08:00
Andrew Tridgell 86927ac0a5 ArduPlane: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 7def0e98e8 USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane 
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
 2011-11-25 20:00:19 -08:00
Andrew Tridgell ca76f6d0ec purple: add the remaining hw defines for purple hardware 2011-11-25 20:00:18 -08:00
Andrew Tridgell 1e41b4b2b0 timer_scheduler doesn't exist in HIL_MODE_ATTITUDE 2011-11-25 20:00:18 -08:00
Andrew Tridgell 3d175c449e adc.Init() takes timer_scheduler 2011-11-25 20:00:17 -08:00
Pat Hickey bad177bfdc removed old commented out code 2011-11-25 20:00:17 -08:00
Pat Hickey ad0cac670c purple: added new parameters needed for new library APIs 
new APIs pass in timer_scheduler. We also to init the isr_registry
 2011-11-25 20:00:17 -08:00
Andrew Tridgell 89d2f0f849 mod barometer.Init() based on hardware 2011-11-25 20:00:15 -08:00
Andrew Tridgell 4933c5bcdd zero airspeed on ground start when initiated by MAVLink 
If the users asks for a new calibration, that should include the
airspeed sensor
 2011-11-21 20:29:18 +11:00
Doug Weibel f752c4b799 Change to logging file system. 
This commit is somewhat temporary as I have come up with a better scheme and will be modifying this.  Just making this commit in case I need to roll back
 2011-11-17 21:25:51 -07:00
Andrew Tridgell 1118d26f03 fixed "Free RAM" display on bootup 2011-10-28 21:34:10 +11:00
Andrew Tridgell 5a44298d57 CLI: enable "hit enter 3 times" support for CLI 
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
 2011-10-27 21:54:07 +11:00
Andrew Tridgell e7e8165bc7 don't initialise DataFlash if logging is disabled 
this fixes HIL without an IMU
 2011-10-09 22:08:59 +11:00
Andrew Tridgell 63ac6bcd94 use memcheck_available_memory() instead of freeRAM() 
this gives a more accurate view of free memory
 2011-10-09 22:08:59 +11:00
Andrew Tridgell e61d742345 GCS: make the two GCS links gcs0 and gcs3 
the artifical separation between 'gcs' and 'hil' just leads to
confusion. This also simplifies the code a bit more, and saves us a
bit more text
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 220b941e31 removed some more dead messages, and convert MSG_* to an enum 
this make it safer to add a new message while keeping deferred queue
the right size
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 3f37cce6c7 remove unused MESSAGE_COMMAND_LIST 2011-09-19 11:04:02 +10:00
Andrew Tridgell 9baab490f1 HIL: first step in simplifying the HIL/GCS code 
this gets rid of the messy #ifdefs around HIL_PORT, and removes
non-MAVLink GCS and HIL support
 2011-09-19 11:04:01 +10:00
Amilcar Lucas 227ce0a92d Merge some small misc improvements from APM_Camera branch 2011-09-17 20:25:31 +02:00
Andrew Tridgell e0dc1271d6 imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00