Commit Graph

775 Commits

Author SHA1 Message Date
Andrew Tridgell 43c1bd0ae9 HAL_Linux: fixed I2C get_device() interface
just stubs for now
2018-01-15 11:46:02 +11:00
mirkix 8d7000db2c AP_HAL_Linux: fix typo 2018-01-09 12:54:03 -08:00
mirkix 9b6a826b49 AP_HAL_linux: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix eecd8fcfa6 AP_HAL_Linux: Add VOLTAGE_SCALING for BeagleBone Blue 2017-12-19 09:17:06 +11:00
mirkix 26f3a62db7 AP_HAL_Linux: remove BBBmini from RCInput_PRU.cpp 2017-12-14 12:40:37 -08:00
HeBin 0e1ce2a7fd AP_HAL_Linux: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
Georgii Staroselskii 56534b34c5 AP_HAL_Linux: use GPIO_Sysfs for Navio
/boot/config.txt: dtoverlay=navio-rgb should be disabled for this thing
to work, though.
2017-11-17 09:20:55 -08:00
Georgii Staroselskii 5254ee03c2 AP_HAL_Linux: use GPIO_Sysfs for Edge 2017-11-17 09:18:36 -08:00
Georgii Staroselskii 8fcd30c611 AP_HAL_Linux: use GPIO_Sysfs for Navio 2 2017-11-17 09:18:35 -08:00
alexshirley 8058fdf093 AP_HAL_Linux: combine ppm and sbus on ocpoc_zynq
Removes compile-time selection of RCInput driver for ocpoc_zynq.
PPM and SBUS input are now colocated on the ocpoc board, and it
only needs to run RCInput_ZYNQ. Pulse input is also inverted
to accommodate SBUS input, which has no effect on PPM input.
2017-11-01 10:28:40 -07:00
Lucas De Marchi cbb9dcc2a1 AP_HAL_Linux: Storage: use define from HAL for directory 2017-10-30 16:57:37 -07:00
Georgii Staroselskii 79c14a92a9 AP_HAL_Linux: adapt Heat_Pwm for Edge 2017-10-20 13:03:08 -07:00
Georgii Staroselskii 4e6fab228c AP_HAL_Linux: add SPI devices for Edge 2017-10-20 13:03:08 -07:00
Staroselskii Georgii 3ade179700 AP_HAL_Linux: make use of RCInput_Navio2 in Edge 2017-10-20 13:03:08 -07:00
Staroselskii Georgii 2a99bb0c95 AP_HAL: use Raspberry Pi GPIO and Util classes for Edge
As it's a yet another Raspberry Pi based board, we may reuse the code.
2017-10-20 13:03:08 -07:00
Staroselskii Georgii 2a7e8d66ee AP_HAL_Linux: add Edge support
Just some usual boilerplate code.
2017-10-20 13:03:08 -07:00
Georgii Staroselskii 2dd68243a2 AP_HAL: add Edge support 2017-10-20 13:03:08 -07:00
Georgii Staroselskii d214a36e0a AP_HAL_Linux: reset duty cycle before setting period
On kernels 4.7+ duty_cycle should always be less than period.
Otherways, we'll get a EINVAL.

It makes sense to set duty_cycle to 0, as
duty_cycle doesn't really make sense without a proper period.

A proper way to handle these errors might be to call pwm_adjust_config
in every pwmchip backend but it's unrealistic to hope that all vendors
will do it quickly.
2017-10-17 13:28:34 -07:00
Lucas De Marchi 4d5aed1d69 AP_HAL_Linux: UARTDevice: never be the controlling terminal
If we are the controlling terminal for a tty device we will receive a
SIGHUP when the device disappears. Currently what happens is that we
simply stop the whole process. We don't want to fall off the sky due
to a bad device. This can happen for any reason, but it's more likely
if the UART is behind a USB connection.
2017-10-02 11:05:09 -07:00
Lucas De Marchi 5ebc8c2cb3 AP_HAL_Linux: ToneAlarm: ifdef out bogus message
These messages are only valid in a small subset of Linux boards (those
based on BBB and variants).  The ToneAlarm class should actually be
split allowing different implementations, but for now let's just disable
the message.
2017-09-28 09:00:26 -07:00
Aaron Wang Shi 6a82e3aecd AP_HAL_Linux: Add debug message in RCInput_RPI _timer_tick() 2017-09-25 21:11:56 -07:00
Aaron Wang Shi ccde7cfdd4 AP_HAL_Linux: Restart RCInput_RPI DMA sampling if it stops 2017-09-25 21:10:54 -07:00
Lucas De Marchi 3847825fba AP_HAL_Linux: make Aero use Tap ESC
This allows controlling the motors from Linux on Intel Aero RTF given
the right FPGA firmware is in place.
2017-09-21 07:59:20 -07:00
Peter Barker 044cac42e8 AP_HAL_Linux: make in_main_thread const and override 2017-09-19 09:40:11 +10:00
Lucas De Marchi 7ba82ff23a AP_HAL_Linux: remove raspilot
It's not being sold, there are just a few (different) engineering
samples built and there are no plans for this to go forward for people
that were pushing it.
2017-09-12 15:06:19 -07:00
Francisco Ferreira 4398be2275 AP_HAL_Linux: remove URUS 2017-09-11 10:04:11 -07:00
davidaroyer 7d2e44862f AP_HAL_Linux: add support for Aerotenna OcPoC-Zynq hardware 2017-09-08 07:30:49 -07:00
Georgii Staroselskii e79fc893fa AP_HAL_Linux: HAL_Linux_Class: delay SPIUARTDriver static initialization
There's an implicit (apart from the name) dependency between SPI and
SPIUARTDriver which results in a crush on a restart or a shutdown.

By moving the initialization we're making sure that all objects are
deleted in the right order.
2017-09-08 07:26:54 -07:00
Georgii Staroselskii 226eeeb738 AP_HAL_Linux: RCOutput_Sysfs: fix deleting _pwm_channels array
delete [] should be called rather than delete.
2017-09-08 07:26:54 -07:00
Georgii Staroselskii f6858821a6 AP_HAL_Linux: PWM_Sysfs: remove unneeded free() in ~PWM_Sysfs_Base
_export_path and _duty_path will have been already long time gone by the
time dtors kick in.

Probably better to use OwnPtr around those. But it's better to be done
in a separate PR.
2017-09-08 07:26:54 -07:00
Lucas De Marchi 66a1e420cb AP_HAL_Linux: RCInput_SoloLink: better name to first field
Checking the time on the tcpdump capture, it matches the first fields
from the data:

$ tshark -n -c 4 -r  ~/tmp/solo/rc.pcap
    1   0.000000     10.1.1.1 → 10.1.1.10    UDP 68 5005 → 5005 Len=26
    2   0.019976     10.1.1.1 → 10.1.1.10    UDP 68 5005 → 5005 Len=26
    3   0.040046     10.1.1.1 → 10.1.1.10    UDP 68 5005 → 5005 Len=26
    4   0.059961     10.1.1.1 → 10.1.1.10    UDP 68 5005 → 5005 Len=26

From the previous commit (first 2 packets):

     5fa8 f441 3414 0500 73d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
     73f6 f441 3414 0500 74d7  dc05 dc05 dc05 db05 e803 e803 e803 f401

0x0005143441f45fa8 - 0x0005143441f4f673 = 0x4E14 = 19988 (usec)

Which seems to approximately match for the other packets as well. We are
not using the field since we rather get the time when we receive it, but
at least use a better name.
2017-08-17 12:04:27 -07:00
Lucas De Marchi 373d41fd6e AP_HAL_Linux: switch aero to RCInput_SoloLink 2017-08-17 12:04:27 -07:00
Lucas De Marchi 79b004cf6a AP_HAL_Linux: add prototype for handling SoloLink
This allows to use a Solo controller to control Linux-based flight
controllers. The protocol has been derived by analyzing a tcpdump
trace: some fields are ignored. Example trace of RC data (obtained
with `tshark -T fields -e data -n -c 5 -r  rc.pcap`

 unkonwn              seq   ch1  ch2  ch3  ...                ch8
 5fa8 f441 3414 0500 73d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
 73f6 f441 3414 0500 74d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
 dc44 f541 3414 0500 75d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
 bc92 f541 3414 0500 76d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
 dfe0 f541 3414 0500 77d7  dc05 dc05 dc05 db05 e803 e803 e803 f401
2017-08-17 12:04:27 -07:00
Peter Barker 23d91c93c8 AP_HAL_Linux: correct compilation warning
../../../libraries/AP_HAL_Linux/RCInput_RPI.cpp:129:35: warning: ignoring return value of ‘ssize_t read(int, void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
         ::read(file, &pageInfo, 8);
2017-08-17 11:28:36 +01:00
Lucas De Marchi 5ea1784838 global: remove AP_HAL::in_timerprocess()
This is not used and in the only places it would make sense would be
internally to the scheduler so remove it.
2017-08-03 20:25:14 -07:00
Lucas De Marchi 93a558ce5c AP_HAL_Linux: do not call delay callbacks on other threads
If a thread other than the main one calls Scheduler::delay() we could
end up triggering the call of delay callbacks. Those should only ever
happen on the main thread.
2017-08-03 20:24:57 -07:00
Lucas De Marchi c170c2a847 AP_HAL_Linux: remove register_timer_process with extra arg
This is not used anymore.
2017-08-02 08:00:53 -07:00
Lucas De Marchi 0a158f6d3f AP_HAL_Linux: remove support for timesliced timer
This has long been replaced by the bus per thread scheme.
2017-08-02 08:00:53 -07:00
Siddharth Bharat Purohit d1e0f9733e HAL_Linux: use correct datatype for time conversion 2017-07-13 18:23:00 -07:00
Andrew Tridgell 9868ffe13b HAL_Linux: support receiver based RSSI 2017-07-03 11:22:21 +10:00
Lucas De Marchi ee0f46e3aa AP_HAL_Linux: RCInput_RPI: ignore unwanted signals
We are setting a termination handler for some signals which are of not
interest.  Just ignore them.  Ignoring SIGWINCH allows for example to
run on a screen and change the window size later without killing
ardupilot.
2017-05-23 09:09:51 +10:00
Lucas De Marchi e803045d1f AP_HAL_Linux: Scheduler: increase stack for scheduler threads
RPI-based boards that use RCInput_RPI need more stack space otherwise we
end up with stack corruption. This leads to crash particularly when also
using GPIO_RPI since it may change what that driver is poking on memory.

This increases stack size to 1M which is overkill for most of other
boards with a more controllable stack usage. However this exposes that
on multiple different HWs a single point for stack size decision may not
be the best.  This can be improved in future.
2017-05-23 09:09:51 +10:00
Peter Barker c78f3b9e78 AP_HAL_Linux: use HAL_SEMAPHORE_BLOCK_FOREVER macro 2017-05-08 10:23:03 +09:00
Andrew Tridgell 279c1b9d9c AP_HAL_Linux: rename macros to avoid conflicts
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Peter Barker 5a02219642 AP_HAL_Linux: use HAL_SEMAPHORE_BLOCK_FOREVER 2017-05-01 15:05:51 +01:00
Andrew Tridgell 9b297ef5a1 HAL_Linux: fixed nested cork/push
don't generate extra pulse sets if we nest
2017-05-01 14:32:18 +10:00
Lucas De Marchi 875538ccb5 AP_HAL_Linux: examples: small fixes to BusTest
- Fix char allocation
  - Fix coding style
  - Fix accessing dev->bus_type(): it's a function
2017-04-19 01:13:40 -07:00
hiro2233 0d1d430600 AP_HAL_Linux:examples: Example to test device bus with the new APM API. 2017-04-19 01:05:12 -07:00
hiro2233 be06c1e8ed AP_HAL_Linux:SPIDevice: Add functions to get possible spi registered device 2017-04-19 01:05:12 -07:00
Lucas De Marchi 16c1bc1b0e AP_HAL_Linux: Util: fix coding style for pointers 2017-04-19 00:19:40 -07:00